If extract_metadata() fails, it will free metadata in its own error
path, so it is safe to simply return the provided error value without
worrying about resource handling/releasing.
Moreover, if we simply return in extract_metadata()'s error path, we
can assume the thread of execution will only make it down into the
free_metadata: tag area sometime after extract_metadata()'s success,
in which case metadata will need to be freed without question.
Bug: 234030265
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Change-Id: I1bf42ff9ecef3eea26543526c6955d7823d45c43
if2fs_fill_super
-> f2fs_build_segment_manager
-> create_discard_cmd_control
-> f2fs_start_discard_thread
It invokes kthread_run to create a thread and run issue_discard_thread.
However, if f2fs_build_node_manager fails, the control flow goes to
free_nm and calls f2fs_destroy_node_manager. This function will free
sbi->nm_info. However, if issue_discard_thread accesses sbi->nm_info
after the deallocation, but before the f2fs_stop_discard_thread, it will
cause UAF(Use-after-free).
-> f2fs_destroy_segment_manager
-> destroy_discard_cmd_control
-> f2fs_stop_discard_thread
Fix this by stopping discard thread before f2fs_destroy_node_manager.
Note that, the commit d6d2b491a82e1 introduces the call of
f2fs_available_free_memory into issue_discard_thread.
Cc: stable@vger.kernel.org
Fixes: d6d2b491a82e ("f2fs: allow to change discard policy based on cached discard cmds")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
(cherry picked from commit 5429c9dbc9025f9a166f64e22e3a69c94fd5b29b)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Change-Id: If121b453455b11b2aded8ba8a3899faad431dbd3
Add proper check to validate table rule count
which may lead to overflow error.
Change-Id: Idfa86878db49ad4803f8902c995eb4186a2d3523
Signed-off-by: Praveen Kurapati <pkurapat@codeaurora.org>
commit f7d306b47a24367302bd4fe846854e07752ffcd9 upstream.
The usb_get_descriptor() function does DMA so we're not allowed
to use a stack buffer for that. Doing DMA to the stack is not portable
all architectures. Move the "new_device_descriptor" from being stored
on the stack and allocate it with kmalloc() instead.
Bug: 382243530
Fixes: b909df18ce2a ("ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices")
Cc: stable@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/60e3aa09-039d-46d2-934c-6f123026c2eb@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Benoît Sevens <bsevens@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 4e54dc4bbc602133217de301d9f814f3e6d22eee)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I469212aa538584e3d8cc5b0087b68c99acf43f64
https://source.android.com/docs/security/bulletin/2025-01-01
* tag 'ASB-2025-01-05_4.19-stable' of https://android.googlesource.com/kernel/common: (132 commits)
Revert "UPSTREAM: unicode: Don't special case ignorable code points"
Reapply "UPSTREAM: unicode: Don't special case ignorable code points"
Revert "UPSTREAM: unicode: Don't special case ignorable code points"
Linux 4.19.325
sh: intc: Fix use-after-free bug in register_intc_controller()
modpost: remove incorrect code in do_eisa_entry()
9p/xen: fix release of IRQ
9p/xen: fix init sequence
block: return unsigned int from bdev_io_min
jffs2: fix use of uninitialized variable
ubi: fastmap: Fix duplicate slab cache names while attaching
ubifs: Correct the total block count by deducting journal reservation
rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
um: Fix the return value of elf_core_copy_task_fpregs
rpmsg: glink: Propagate TX failures in intentless mode as well
NFSD: Prevent a potential integer overflow
lib: string_helpers: silence snprintf() output truncation warning
usb: dwc3: gadget: Fix checking for number of TRBs left
media: wl128x: Fix atomicity violation in fmc_send_cmd()
...
Conflicts:
arch/arm64/boot/dts/vendor/bindings/clock/adi,axi-clkgen.yaml
arch/arm64/boot/dts/vendor/bindings/clock/axi-clkgen.txt
drivers/rpmsg/qcom_glink_native.c
Change-Id: Iea6ddf20dfaa4419f6e0b2efcee1890bfa8e2554
commit 3e6f8d1fa18457d54b20917bd9174d27daf09ab9 upstream.
Similar to
commit 231ad7f409f1 ("Makefile: infer --target from ARCH for CC=clang")
There really is no point in setting --target based on
$CROSS_COMPILE_COMPAT for clang when the integrated assembler is being
used, since
commit ef94340583ee ("arm64: vdso32: drop -no-integrated-as flag").
Allows COMPAT_VDSO to be selected without setting $CROSS_COMPILE_COMPAT
when using clang and lld together.
Before:
$ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
CONFIG_COMPAT_VDSO=y
$ ARCH=arm64 make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
$
After:
$ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
CONFIG_COMPAT_VDSO=y
$ ARCH=arm64 make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
CONFIG_COMPAT_VDSO=y
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20211019223646.1146945-5-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: I91e4f7a6944819e9ec0dffc0f19da5436d62fec3
Before commit e42ee61017f5 ("of: Let of_for_each_phandle fallback to
non-negative cell_count") the iterator functions calling
of_for_each_phandle assumed a cell count of 0 if cells_name was NULL.
This corner case was missed when implementing the fallback logic in
e42ee61017f5 and resulted in an endless loop.
Restore the old behaviour of of_count_phandle_with_args() and
of_parse_phandle_with_args() and add a check to
of_phandle_iterator_init() to prevent a similar failure as a safety
precaution. of_parse_phandle_with_args_map() doesn't need a similar fix
as cells_name isn't NULL there.
Affected drivers are:
- drivers/base/power/domain.c
- drivers/base/power/domain.c
- drivers/clk/ti/clk-dra7-atl.c
- drivers/hwmon/ibmpowernv.c
- drivers/i2c/muxes/i2c-demux-pinctrl.c
- drivers/iommu/mtk_iommu.c
- drivers/net/ethernet/freescale/fman/mac.c
- drivers/opp/of.c
- drivers/perf/arm_dsu_pmu.c
- drivers/regulator/of_regulator.c
- drivers/remoteproc/imx_rproc.c
- drivers/soc/rockchip/pm_domains.c
- sound/soc/fsl/imx-audmix.c
- sound/soc/fsl/imx-audmix.c
- sound/soc/meson/axg-card.c
- sound/soc/samsung/tm2_wm5110.c
- sound/soc/samsung/tm2_wm5110.c
Thanks to Geert Uytterhoeven for reporting the issue, Peter Rosin for
helping pinpoint the actual problem and the testers for confirming this
fix.
Fixes: e42ee61017f5 ("of: Let of_for_each_phandle fallback to non-negative cell_count")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Change-Id: I684efc01df23ea32c578c1da4f8ea6fcf6f03ced
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Referencing device tree nodes from a property allows to pass arguments.
This is for example used for referencing gpios. This looks as follows:
gpio_ctrl: gpio-controller {
#gpio-cells = <2>
...
}
someothernode {
gpios = <&gpio_ctrl 5 0 &gpio_ctrl 3 0>;
...
}
To know the number of arguments this must be either fixed, or the
referenced node is checked for a $cells_name (here: "#gpio-cells")
property and with this information the start of the second reference can
be determined.
Currently regulators are referenced with no additional arguments. To
allow some optional arguments without having to change all referenced
nodes this change introduces a way to specify a default cell_count. So
when a phandle is parsed we check for the $cells_name property and use
it as before if present. If it is not present we fall back to
cells_count if non-negative and only fail if cells_count is smaller than
zero.
Change-Id: Ic7a6a5e667d46847becb2a9593a00ba6db49fc98
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
https://source.android.com/docs/security/bulletin/2024-12-01
* tag 'ASB-2024-12-05_4.19-stable' of https://android.googlesource.com/kernel/common: (401 commits)
Linux 4.19.324
9p: fix slab cache name creation for real
net: usb: qmi_wwan: add Fibocom FG132 0x0112 composition
fs: Fix uninitialized value issue in from_kuid and from_kgid
powerpc/powernv: Free name on error in opal_event_init()
sound: Make CONFIG_SND depend on INDIRECT_IOMEM instead of UML
bpf: use kvzmalloc to allocate BPF verifier environment
HID: multitouch: Add quirk for HONOR MagicBook Art 14 touchpad
9p: Avoid creating multiple slab caches with the same name
ALSA: usb-audio: Add endianness annotations
vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointer
ALSA: usb-audio: Add quirks for Dell WD19 dock
ALSA: usb-audio: Support jack detection on Dell dock
ALSA: usb-audio: Add custom mixer status quirks for RME CC devices
ALSA: pcm: Return 0 when size < start_threshold in capture
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
irqchip/gic-v3: Force propagation of the active state with a read-back
USB: serial: option: add Quectel RG650V
USB: serial: option: add Fibocom FG132 0x0112 composition
...
Conflicts:
drivers/usb/dwc3/core.c
drivers/usb/dwc3/core.h
net/qrtr/qrtr.c
Change-Id: I328847813eb875d25c4aa35dcc7ba58ad09b53ae
This reverts commit 62bbb08add179b68e2ce0ede59f3c4b37d6c92a8.
Reason for revert: b/382800956
Bug: 382800956
Change-Id: Ic7a0cdbb060c12c1628a5859d795e78cd6b9341d
Signed-off-by: Todd Kjos <tkjos@google.com>
(cherry picked from commit c376628415656f16d398aad95c218a06805038bd)
Signed-off-by: Lee Jones <joneslee@google.com>
This reverts commit e1ba90026d98e53f5736131f3363424e83315f00.
Reapplying only to re-revert with the correct Change-Id
Bug: 382800956
Signed-off-by: Todd Kjos <tkjos@google.com>
Change-Id: Icdd08040f04ed7e85d31b7f8551ee2ef1d0b95b0
Changes in 4.19.325
netlink: terminate outstanding dump on socket close
ocfs2: uncache inode which has failed entering the group
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K"
media: dvbdev: fix the logic when DVB_DYNAMIC_MINORS is not set
kbuild: Use uname for LINUX_COMPILE_HOST detection
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet
mac80211: fix user-power when emulating chanctx
selftests/watchdog-test: Fix system accidentally reset after watchdog-test
x86/amd_nb: Fix compile-testing without CONFIG_AMD_NB
net: usb: qmi_wwan: add Quectel RG650V
proc/softirqs: replace seq_printf with seq_put_decimal_ull_width
nvme: fix metadata handling in nvme-passthrough
initramfs: avoid filename buffer overrun
m68k: mvme147: Fix SCSI controller IRQ numbers
m68k: mvme16x: Add and use "mvme16x.h"
m68k: mvme147: Reinstate early console
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
s390/syscalls: Avoid creation of arch/arch/ directory
hfsplus: don't query the device logical block size multiple times
EDAC/fsl_ddr: Fix bad bit shift operations
crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY
crypto: cavium - Fix the if condition to exit loop after timeout
crypto: bcm - add error check in the ahash_hmac_init function
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
time: Fix references to _msecs_to_jiffies() handling of values
soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
mmc: mmc_spi: drop buggy snprintf()
ARM: dts: cubieboard4: Fix DCDC5 regulator constraints
regmap: irq: Set lockdep class for hierarchical IRQ domains
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
drm/mm: Mark drm_mm_interval_tree*() functions with __maybe_unused
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
drm/omap: Fix locking in omap_gem_new_dmabuf()
bpf: Fix the xdp_adjust_tail sample prog issue
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_config_scan()
drm/etnaviv: consolidate hardware fence handling in etnaviv_gpu
drm/etnaviv: dump: fix sparse warnings
drm/etnaviv: fix power register offset on GC300
drm/etnaviv: hold GPU lock across perfmon sampling
net: rfkill: gpio: Add check for clk_enable()
ALSA: us122l: Use snd_card_free_when_closed() at disconnection
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
ALSA: 6fire: Release resources at card release
netpoll: Use rcu_access_pointer() in netpoll_poll_lock
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
powerpc/vdso: Flag VDSO64 entry points as functions
mfd: da9052-spi: Change read-mask to write-mask
cpufreq: loongson2: Unregister platform_driver on failure
mtd: rawnand: atmel: Fix possible memory leak
RDMA/bnxt_re: Check cqe flags to know imm_data vs inv_irkey
mfd: rt5033: Fix missing regmap_del_irq_chip()
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: fusion: Remove unused variable 'rc'
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static
fbdev/sh7760fb: Alloc DMA memory from hardware device
fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem()
dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format
dt-bindings: clock: axi-clkgen: include AXI clk
clk: axi-clkgen: use devm_platform_ioremap_resource() short-hand
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
perf probe: Correct demangled symbols in C++ program
PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads
PCI: cpqphp: Fix PCIBIOS_* return value confusion
m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x
m68k: coldfire/device.c: only build FEC when HW macros are defined
rpmsg: glink: Add TX_DATA_CONT command while sending
rpmsg: glink: Send READ_NOTIFY command in FIFO full case
rpmsg: glink: Fix GLINK command prefix
rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length
NFSD: Prevent NULL dereference in nfsd4_process_cb_update()
NFSD: Cap the number of bytes copied by nfs4_reset_recoverydir()
vfio/pci: Properly hide first-in-list PCIe extended capability
power: supply: core: Remove might_sleep() from power_supply_put()
net: usb: lan78xx: Fix memory leak on device unplug by freeing PHY device
tg3: Set coherent DMA mask bits to 31 for BCM57766 chipsets
net: usb: lan78xx: Fix refcounting and autosuspend on invalid WoL configuration
marvell: pxa168_eth: fix call balance of pep->clk handling routines
net: stmmac: dwmac-socfpga: Set RX watchdog interrupt as broken
usb: using mutex lock and supporting O_NONBLOCK flag in iowarrior_read()
USB: chaoskey: fail open after removal
USB: chaoskey: Fix possible deadlock chaoskey_list_lock
misc: apds990x: Fix missing pm_runtime_disable()
apparmor: fix 'Do simple duplicate message elimination'
usb: ehci-spear: fix call balance of sehci clk handling routines
ext4: supress data-race warnings in ext4_free_inodes_{count,set}()
ext4: fix FS_IOC_GETFSMAP handling
jfs: xattr: check invalid xattr size more strictly
ASoC: codecs: Fix atomicity violation in snd_soc_component_get_drvdata()
PCI: Fix use-after-free of slot->bus on hot remove
tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}()
ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices
Revert "usb: gadget: composite: fix OS descriptors w_value logic"
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
netfilter: ipset: add missing range check in bitmap_ip_uadt
spi: Fix acpi deferred irq probe
ubi: wl: Put source PEB into correct list if trying locking LEB failed
um: ubd: Do not use drvdata in release
um: net: Do not use drvdata in release
serial: 8250: omap: Move pm_runtime_get_sync
um: vector: Do not use drvdata in release
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
block: fix ordering between checking BLK_MQ_S_STOPPED request adding
HID: wacom: Interpret tilt data from Intuos Pro BT as signed values
media: wl128x: Fix atomicity violation in fmc_send_cmd()
usb: dwc3: gadget: Fix checking for number of TRBs left
lib: string_helpers: silence snprintf() output truncation warning
NFSD: Prevent a potential integer overflow
rpmsg: glink: Propagate TX failures in intentless mode as well
um: Fix the return value of elf_core_copy_task_fpregs
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
ubifs: Correct the total block count by deducting journal reservation
ubi: fastmap: Fix duplicate slab cache names while attaching
jffs2: fix use of uninitialized variable
block: return unsigned int from bdev_io_min
9p/xen: fix init sequence
9p/xen: fix release of IRQ
modpost: remove incorrect code in do_eisa_entry()
sh: intc: Fix use-after-free bug in register_intc_controller()
Linux 4.19.325
Change-Id: I50250c8bd11f9ff4b40da75225c1cfb060e0c258
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 63e72e551942642c48456a4134975136cdcb9b3c ]
In the error handling for this function, d is freed without ever
removing it from intc_list which would lead to a use after free.
To fix this, let's only add it to the list after everything has
succeeded.
Fixes: 2dcec7a988 ("sh: intc: set_irq_wake() support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c3e091319e4748cb36ac9a50848903dc6f54054 ]
This function contains multiple bugs after the following commits:
- ac55182899 ("modpost: i2c aliases need no trailing wildcard")
- 6543becf26 ("mod/file2alias: make modalias generation safe for cross compiling")
Commit ac55182899 inserted the following code to do_eisa_entry():
else
strcat(alias, "*");
This is incorrect because 'alias' is uninitialized. If it is not
NULL-terminated, strcat() could cause a buffer overrun.
Even if 'alias' happens to be zero-filled, it would output:
MODULE_ALIAS("*");
This would match anything. As a result, the module could be loaded by
any unrelated uevent from an unrelated subsystem.
Commit ac55182899 introduced another bug.
Prior to that commit, the conditional check was:
if (eisa->sig[0])
This checked if the first character of eisa_device_id::sig was not '\0'.
However, commit ac55182899 changed it as follows:
if (sig[0])
sig[0] is NOT the first character of the eisa_device_id::sig. The
type of 'sig' is 'char (*)[8]', meaning that the type of 'sig[0]' is
'char [8]' instead of 'char'. 'sig[0]' and 'symval' refer to the same
address, which never becomes NULL.
The correct conversion would have been:
if ((*sig)[0])
However, this if-conditional was meaningless because the earlier change
in commit ac551828993e was incorrect.
This commit removes the entire incorrect code, which should never have
been executed.
Fixes: ac55182899 ("modpost: i2c aliases need no trailing wildcard")
Fixes: 6543becf26 ("mod/file2alias: make modalias generation safe for cross compiling")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ef3ae82a6ebbf4750967d1ce43bcdb7e44ff74b ]
Large amount of mount hangs observed during hotplugging of 9pfs devices. The
9pfs Xen driver attempts to initialize itself more than once, causing the
frontend and backend to disagree: the backend listens on a channel that the
frontend does not send on, resulting in stalled processing.
Only allow initialization of 9p frontend once.
Fixes: c15fe55d14b3b ("9p/xen: fix connection sequence")
Signed-off-by: Alex Zenla <alex@edera.dev>
Signed-off-by: Alexander Merritt <alexander@edera.dev>
Signed-off-by: Ariadne Conill <ariadne@ariadne.space>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241119211633.38321-1-alexander@edera.dev>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ba44ee966bc3c41dd8a944f963466c8fcc60dc8 ]
When building the kernel with -Wmaybe-uninitialized, the compiler
reports this warning:
In function 'jffs2_mark_erased_block',
inlined from 'jffs2_erase_pending_blocks' at fs/jffs2/erase.c:116:4:
fs/jffs2/erase.c:474:9: warning: 'bad_offset' may be used uninitialized [-Wmaybe-uninitialized]
474 | jffs2_erase_failed(c, jeb, bad_offset);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/jffs2/erase.c: In function 'jffs2_erase_pending_blocks':
fs/jffs2/erase.c:402:18: note: 'bad_offset' was declared here
402 | uint32_t bad_offset;
| ^~~~~~~~~~
When mtd->point() is used, jffs2_erase_pending_blocks can return -EIO
without initializing bad_offset, which is later used at the filebad
label in jffs2_mark_erased_block.
Fix it by initializing this variable.
Fixes: 8a0f572397 ("[JFFS2] Return values of jffs2_block_check_erase error paths")
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcddf52b7a17adcebc768d26f4e27cf79adb424c ]
Since commit 4c39529663b9 ("slab: Warn on duplicate cache names when
DEBUG_VM=y"), the duplicate slab cache names can be detected and a
kernel WARNING is thrown out.
In UBI fast attaching process, alloc_ai() could be invoked twice
with the same slab cache name 'ubi_aeb_slab_cache', which will trigger
following warning messages:
kmem_cache of name 'ubi_aeb_slab_cache' already exists
WARNING: CPU: 0 PID: 7519 at mm/slab_common.c:107
__kmem_cache_create_args+0x100/0x5f0
Modules linked in: ubi(+) nandsim [last unloaded: nandsim]
CPU: 0 UID: 0 PID: 7519 Comm: modprobe Tainted: G 6.12.0-rc2
RIP: 0010:__kmem_cache_create_args+0x100/0x5f0
Call Trace:
__kmem_cache_create_args+0x100/0x5f0
alloc_ai+0x295/0x3f0 [ubi]
ubi_attach+0x3c3/0xcc0 [ubi]
ubi_attach_mtd_dev+0x17cf/0x3fa0 [ubi]
ubi_init+0x3fb/0x800 [ubi]
do_init_module+0x265/0x7d0
__x64_sys_finit_module+0x7a/0xc0
The problem could be easily reproduced by loading UBI device by fastmap
with CONFIG_DEBUG_VM=y.
Fix it by using different slab names for alloc_ai() callers.
Fixes: d2158f69a7 ("UBI: Remove alloc_ai() slab name from parameter list")
Fixes: fdf10ed710 ("ubi: Rework Fastmap attach base code")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84a2bee9c49769310efa19601157ef50a1df1267 ]
Since commit e874dcde1cbf ("ubifs: Reserve one leb for each journal
head while doing budget"), available space is calulated by deducting
reservation for all journal heads. However, the total block count (
which is only used by statfs) is not updated yet, which will cause
the wrong displaying for used space(total - available).
Fix it by deducting reservation for all journal heads from total
block count.
Fixes: e874dcde1cbf ("ubifs: Reserve one leb for each journal head while doing budget")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8ba8a2bc4f60a1065f23d6a0e7cbea945a0f40d ]
If the __rtc_read_time call fails,, the struct rtc_time tm; may contain
uninitialized data, or an illegal date/time read from the RTC hardware.
When calling rtc_tm_to_ktime later, the result may be a very large value
(possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue,
they will continually expire, may causing kernel softlockup.
Fixes: 6610e0893b ("RTC: Rework RTC code to use timerqueue for events")
Signed-off-by: Yongliang Gao <leonylgao@tencent.com>
Acked-by: Jingqun Li <jingqunli@tencent.com>
Link: https://lore.kernel.org/r/20241011043153.3788112-1-leonylgao@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fdb05dc0931250574f0cb0ebeb5ed8e20f4a889 ]
Yang Erkun reports that when two threads are opening files at the same
time, and are forced to abort before a reply is seen, then the call to
nfs_release_seqid() in nfs4_opendata_free() can result in a
use-after-free of the pointer to the defunct rpc task of the other
thread.
The fix is to ensure that if the RPC call is aborted before the call to
nfs_wait_on_sequence() is complete, then we must call nfs_release_seqid()
in nfs4_open_release() before the rpc_task is freed.
Reported-by: Yang Erkun <yangerkun@huawei.com>
Fixes: 24ac23ab88 ("NFSv4: Convert open() into an asynchronous RPC call")
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7a68f9fa97357a0f2073c9c31ed4101da4fce93e upstream.
As support for splitting transmission over several messages using
TX_DATA_CONT was introduced it does not immediately return the return
value of qcom_glink_tx().
The result is that in the intentless case (i.e. intent == NULL), the
code will continue to send all additional chunks. This is wasteful, and
it's possible that the send operation could incorrectly indicate
success, if the last chunk fits in the TX fifo.
Fix the condition.
Fixes: 8956927faed3 ("rpmsg: glink: Add TX_DATA_CONT command while sending")
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230418163018.785524-2-quic_bjorande@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f33b92e5b18e904a481e6e208486da43e4dc841 upstream.
If the tag length is >= U32_MAX - 3 then the "length + 4" addition
can result in an integer overflow. Address this by splitting the
decoding into several steps so that decode_cb_compound4res() does
not have to perform arithmetic on the unsafe length value.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02a6982b0ccfcdc39e20016f5fc9a1b7826a6ee7 upstream.
The check whether the TRB ring is full or empty in dwc3_calc_trbs_left()
is insufficient. It assumes there are active TRBs if there's any request
in the started_list. However, that's not the case for requests with a
large SG list.
That is, if we have a single usb request that requires more TRBs than
the total TRBs in the TRB ring, the queued TRBs will be available when
all the TRBs in the ring are completed. But the request is only
partially completed and remains in the started_list. With the current
logic, the TRB ring is empty, but dwc3_calc_trbs_left() returns 0.
Fix this by additionally checking for the request->num_trbs for active
TRB count.
Cc: stable@vger.kernel.org
Fixes: 51f1954ad853 ("usb: dwc3: gadget: Fix dwc3_calc_trbs_left()")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/708dc62b56b77da1f704cc2ae9b6ddb1f2dbef1f.1731545781.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca59f9956d4519ab18ab2270be47c6b8c6ced091 upstream.
Atomicity violation occurs when the fmc_send_cmd() function is executed
simultaneously with the modification of the fmdev->resp_skb value.
Consider a scenario where, after passing the validity check within the
function, a non-null fmdev->resp_skb variable is assigned a null value.
This results in an invalid fmdev->resp_skb variable passing the validity
check. As seen in the later part of the function, skb = fmdev->resp_skb;
when the invalid fmdev->resp_skb passes the check, a null pointer
dereference error may occur at line 478, evt_hdr = (void *)skb->data;
To address this issue, it is recommended to include the validity check of
fmdev->resp_skb within the locked section of the function. This
modification ensures that the value of fmdev->resp_skb does not change
during the validation process, thereby maintaining its validity.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: e8454ff7b9 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49a397ad24ee5e2c53a59dada2780d7e71bd3f77 upstream.
The tilt data contained in the Bluetooth packets of an Intuos Pro are
supposed to be interpreted as signed values. Simply casting the values
to type `char` is not guaranteed to work since it is implementation-
defined whether it is signed or unsigned. At least one user has noticed
the data being reported incorrectly on their system. To ensure that the
data is interpreted properly, we specifically cast to `signed char`
instead.
Link: https://github.com/linuxwacom/input-wacom/issues/445
Fixes: 4922cd26f0 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
CC: stable@vger.kernel.org # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96a9fe64bfd486ebeeacf1e6011801ffe89dae18 upstream.
Supposing first scenario with a virtio_blk driver.
CPU0 CPU1
blk_mq_try_issue_directly()
__blk_mq_issue_directly()
q->mq_ops->queue_rq()
virtio_queue_rq()
blk_mq_stop_hw_queue()
virtblk_done()
blk_mq_request_bypass_insert() 1) store
blk_mq_start_stopped_hw_queue()
clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending())
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
return
__blk_mq_sched_dispatch_requests()
Supposing another scenario.
CPU0 CPU1
blk_mq_requeue_work()
blk_mq_insert_request() 1) store
virtblk_done()
blk_mq_start_stopped_hw_queue()
blk_mq_run_hw_queues() clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
continue
blk_mq_run_hw_queue()
Both scenarios are similar, the full memory barrier should be inserted
between 1) and 2), as well as between 3) and 4) to make sure that either
CPU0 sees BLK_MQ_S_STOPPED is cleared or CPU1 sees dispatch list.
Otherwise, either CPU will not rerun the hardware queue causing
starvation of the request.
The easy way to fix it is to add the essential full memory barrier into
helper of blk_mq_hctx_stopped(). In order to not affect the fast path
(hardware queue is not stopped most of the time), we only insert the
barrier into the slow path. Actually, only slow path needs to care about
missing of dispatching the request to the low-level device driver.
Fixes: 320ae51fee ("blk-mq: new multi-queue block IO queueing mechanism")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-4-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67ab51cbdfee02ef07fb9d7d14cc0bf6cb5a5e5c upstream.
Commit 18011eac28 ("arm64: tls: Avoid unconditional zeroing of
tpidrro_el0 for native tasks") tried to optimise the context switching
of tpidrro_el0 by eliding the clearing of the register when switching
to a native task with kpti enabled, on the erroneous assumption that
the kpti trampoline entry code would already have taken care of the
write.
Although the kpti trampoline does zero the register on entry from a
native task, the check in tls_thread_switch() is on the *next* task and
so we can end up leaving a stale, non-zero value in the register if the
previous task was 32-bit.
Drop the broken optimisation and zero tpidrro_el0 unconditionally when
switching to a native 64-bit task.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: 18011eac28 ("arm64: tls: Avoid unconditional zeroing of tpidrro_el0 for native tasks")
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241114095332.23391-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcc7ba668818dcadd2f1db66b39ed860a63ecf97 upstream.
Currently in omap_8250_shutdown, the dma->rx_running flag is
set to zero in omap_8250_rx_dma_flush. Next pm_runtime_get_sync
is called, which is a runtime resume call stack which can
re-set the flag. When the call omap_8250_shutdown returns, the
flag is expected to be UN-SET, but this is not the case. This
is causing issues the next time UART is re-opened and
omap_8250_rx_dma is called. Fix by moving pm_runtime_get_sync
before the omap_8250_rx_dma_flush.
cc: stable@vger.kernel.org
Fixes: 0e31c8d173 ("tty: serial: 8250_omap: add custom DMA-RX callback")
Signed-off-by: Bin Liu <b-liu@ti.com>
[Judith: Add commit message]
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20241031172315.453750-1-jm@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d610020f030bec819f42de327c2bd5437d2766b3 upstream.
During wear-leveing work, the source PEB will be moved into scrub list
when source LEB cannot be locked in ubi_eba_copy_leb(), which is wrong
for non-scrub type source PEB. The problem could bring extra and
ineffective wear-leveing jobs, which makes more or less negative effects
for the life time of flash. Specifically, the process is divided 2 steps:
1. wear_leveling_worker // generate false scrub type PEB
ubi_eba_copy_leb // MOVE_RETRY is returned
leb_write_trylock // trylock failed
scrubbing = 1;
e1 is put into ubi->scrub
2. wear_leveling_worker // schedule false scrub type PEB for wl
scrubbing = 1
e1 = rb_entry(rb_first(&ubi->scrub))
The problem can be reproduced easily by running fsstress on a small
UBIFS partition(<64M, simulated by nandsim) for 5~10mins
(CONFIG_MTD_UBI_FASTMAP=y,CONFIG_MTD_UBI_WL_THRESHOLD=50). Following
message is shown:
ubi0: scrubbed PEB 66 (LEB 0:10), data moved to PEB 165
Since scrub type source PEB has set variable scrubbing as '1', and
variable scrubbing is checked before variable keep, so the problem can
be fixed by setting keep variable as 1 directly if the source LEB cannot
be locked.
Fixes: e801e128b2 ("UBI: fix missing scrub when there is a bit-flip")
CC: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35f56c554eb1b56b77b3cf197a6b00922d49033d upstream.
When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists,
the values of ip and ip_to are slightly swapped. Therefore, the range check
for ip should be done later, but this part is missing and it seems that the
vulnerability occurs.
So we should add missing range checks and remove unnecessary range checks.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+58c872f7790a4d2ac951@syzkaller.appspotmail.com
Fixes: 72205fc68b ("netfilter: ipset: bitmap:ip set type support")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 718632467d88e98816fa01ab12681ef1c2aa56f8 upstream.
This reverts commit 3791ea69a4858b81e0277f695ca40f5aae40f312.
It was reported to cause boot-time issues, so revert it for now.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 3791ea69a485 ("serial: sh-sci: Clean sci_ports[0] after at earlycon exit")
Cc: stable <stable@kernel.org>
Cc: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3791ea69a4858b81e0277f695ca40f5aae40f312 upstream.
The early_console_setup() function initializes the sci_ports[0].port with
an object of type struct uart_port obtained from the object of type
struct earlycon_device received as argument by the early_console_setup().
It may happen that later, when the rest of the serial ports are probed,
the serial port that was used as earlycon (e.g., port A) to be mapped to a
different position in sci_ports[] and the slot 0 to be used by a different
serial port (e.g., port B), as follows:
sci_ports[0] = port A
sci_ports[X] = port B
In this case, the new port mapped at index zero will have associated data
that was used for earlycon.
In case this happens, after Linux boot, any access to the serial port that
maps on sci_ports[0] (port A) will block the serial port that was used as
earlycon (port B).
To fix this, add early_console_exit() that clean the sci_ports[0] at
earlycon exit time.
Fixes: 0b0cced19a ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241106120118.1719888-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51cdd69d6a857f527d6d0697a2e1f0fa8bca1005 upstream.
This reverts commit ec6ce7075ef879b91a8710829016005dc8170f17.
Fix installation of WinUSB driver using OS descriptors. Without the
fix the drivers are not installed correctly and the property
'DeviceInterfaceGUID' is missing on host side.
The original change was based on the assumption that the interface
number is in the high byte of wValue but it is in the low byte,
instead. Unfortunately, the fix is based on MS documentation which is
also wrong.
The actual USB request for OS descriptors (using USB analyzer) looks
like:
Offset 0 1 2 3 4 5 6 7
0x000 C1 A1 02 00 05 00 0A 00
C1: bmRequestType (device to host, vendor, interface)
A1: nas magic number
0002: wValue (2: nas interface)
0005: wIndex (5: get extended property i.e. nas interface GUID)
008E: wLength (142)
The fix was tested on Windows 10 and Windows 11.
Cc: stable@vger.kernel.org
Fixes: ec6ce7075ef8 ("usb: gadget: composite: fix OS descriptors w_value logic")
Signed-off-by: Michal Vrastil <michal.vrastil@hidglobal.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Acked-by: Peter korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20241113235433.20244-1-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fe6caa62b07fd39cd6a28acc8f92ba2955e11a6 upstream.
Commit 9bf4e919ccad worked around an issue introduced after an innocuous
optimisation change in LLVM main:
> len is defined as an 'int' because it is assigned from
> '__user int *optlen'. However, it is clamped against the result of
> sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit
> platforms). This is done with min_t() because min() requires compatible
> types, which results in both len and the result of sizeof() being casted
> to 'unsigned int', meaning len changes signs and the result of sizeof()
> is truncated. From there, len is passed to copy_to_user(), which has a
> third parameter type of 'unsigned long', so it is widened and changes
> signs again. This excessive casting in combination with the KCSAN
> instrumentation causes LLVM to fail to eliminate the __bad_copy_from()
> call, failing the build.
The same issue occurs in rfcomm in functions rfcomm_sock_getsockopt and
rfcomm_sock_getsockopt_old.
Change the type of len to size_t in both rfcomm_sock_getsockopt and
rfcomm_sock_getsockopt_old and replace min_t() with min().
Cc: stable@vger.kernel.org
Co-authored-by: Aleksei Vetrov <vvvvvv@google.com>
Improves: 9bf4e919ccad ("Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()")
Link: https://github.com/ClangBuiltLinux/linux/issues/2007
Link: https://github.com/llvm/llvm-project/issues/85647
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 635a9fca54f4f4148be1ae1c7c6bd37af80f5773 upstream.
Commit 7c0cca7c847e ("tty: ldisc: add sysctl to prevent autoloading of
ldiscs") introduces the tty_ldisc_autoload sysctl with the wrong
proc_handler. .extra1 and .extra2 parameters are set to avoid other values
thant SYSCTL_ZERO or SYSCTL_ONE to be set but proc_dointvec do not uses
them.
This commit fixes this by using proc_dointvec_minmax instead of
proc_dointvec.
Fixes: 7c0cca7c847e ("tty: ldisc: add sysctl to prevent autoloading of ldiscs")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr>
Reviewed-by: Lin Feng <linf@wangsu.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20241112131357.49582-4-nicolas.bouchinet@clip-os.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
