Changes in 4.19.325
netlink: terminate outstanding dump on socket close
ocfs2: uncache inode which has failed entering the group
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K"
media: dvbdev: fix the logic when DVB_DYNAMIC_MINORS is not set
kbuild: Use uname for LINUX_COMPILE_HOST detection
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet
mac80211: fix user-power when emulating chanctx
selftests/watchdog-test: Fix system accidentally reset after watchdog-test
x86/amd_nb: Fix compile-testing without CONFIG_AMD_NB
net: usb: qmi_wwan: add Quectel RG650V
proc/softirqs: replace seq_printf with seq_put_decimal_ull_width
nvme: fix metadata handling in nvme-passthrough
initramfs: avoid filename buffer overrun
m68k: mvme147: Fix SCSI controller IRQ numbers
m68k: mvme16x: Add and use "mvme16x.h"
m68k: mvme147: Reinstate early console
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
s390/syscalls: Avoid creation of arch/arch/ directory
hfsplus: don't query the device logical block size multiple times
EDAC/fsl_ddr: Fix bad bit shift operations
crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY
crypto: cavium - Fix the if condition to exit loop after timeout
crypto: bcm - add error check in the ahash_hmac_init function
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
time: Fix references to _msecs_to_jiffies() handling of values
soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
mmc: mmc_spi: drop buggy snprintf()
ARM: dts: cubieboard4: Fix DCDC5 regulator constraints
regmap: irq: Set lockdep class for hierarchical IRQ domains
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
drm/mm: Mark drm_mm_interval_tree*() functions with __maybe_unused
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
drm/omap: Fix locking in omap_gem_new_dmabuf()
bpf: Fix the xdp_adjust_tail sample prog issue
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_config_scan()
drm/etnaviv: consolidate hardware fence handling in etnaviv_gpu
drm/etnaviv: dump: fix sparse warnings
drm/etnaviv: fix power register offset on GC300
drm/etnaviv: hold GPU lock across perfmon sampling
net: rfkill: gpio: Add check for clk_enable()
ALSA: us122l: Use snd_card_free_when_closed() at disconnection
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
ALSA: 6fire: Release resources at card release
netpoll: Use rcu_access_pointer() in netpoll_poll_lock
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
powerpc/vdso: Flag VDSO64 entry points as functions
mfd: da9052-spi: Change read-mask to write-mask
cpufreq: loongson2: Unregister platform_driver on failure
mtd: rawnand: atmel: Fix possible memory leak
RDMA/bnxt_re: Check cqe flags to know imm_data vs inv_irkey
mfd: rt5033: Fix missing regmap_del_irq_chip()
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: fusion: Remove unused variable 'rc'
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static
fbdev/sh7760fb: Alloc DMA memory from hardware device
fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem()
dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format
dt-bindings: clock: axi-clkgen: include AXI clk
clk: axi-clkgen: use devm_platform_ioremap_resource() short-hand
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
perf probe: Correct demangled symbols in C++ program
PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads
PCI: cpqphp: Fix PCIBIOS_* return value confusion
m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x
m68k: coldfire/device.c: only build FEC when HW macros are defined
rpmsg: glink: Add TX_DATA_CONT command while sending
rpmsg: glink: Send READ_NOTIFY command in FIFO full case
rpmsg: glink: Fix GLINK command prefix
rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length
NFSD: Prevent NULL dereference in nfsd4_process_cb_update()
NFSD: Cap the number of bytes copied by nfs4_reset_recoverydir()
vfio/pci: Properly hide first-in-list PCIe extended capability
power: supply: core: Remove might_sleep() from power_supply_put()
net: usb: lan78xx: Fix memory leak on device unplug by freeing PHY device
tg3: Set coherent DMA mask bits to 31 for BCM57766 chipsets
net: usb: lan78xx: Fix refcounting and autosuspend on invalid WoL configuration
marvell: pxa168_eth: fix call balance of pep->clk handling routines
net: stmmac: dwmac-socfpga: Set RX watchdog interrupt as broken
usb: using mutex lock and supporting O_NONBLOCK flag in iowarrior_read()
USB: chaoskey: fail open after removal
USB: chaoskey: Fix possible deadlock chaoskey_list_lock
misc: apds990x: Fix missing pm_runtime_disable()
apparmor: fix 'Do simple duplicate message elimination'
usb: ehci-spear: fix call balance of sehci clk handling routines
ext4: supress data-race warnings in ext4_free_inodes_{count,set}()
ext4: fix FS_IOC_GETFSMAP handling
jfs: xattr: check invalid xattr size more strictly
ASoC: codecs: Fix atomicity violation in snd_soc_component_get_drvdata()
PCI: Fix use-after-free of slot->bus on hot remove
tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}()
ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices
Revert "usb: gadget: composite: fix OS descriptors w_value logic"
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
netfilter: ipset: add missing range check in bitmap_ip_uadt
spi: Fix acpi deferred irq probe
ubi: wl: Put source PEB into correct list if trying locking LEB failed
um: ubd: Do not use drvdata in release
um: net: Do not use drvdata in release
serial: 8250: omap: Move pm_runtime_get_sync
um: vector: Do not use drvdata in release
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
block: fix ordering between checking BLK_MQ_S_STOPPED request adding
HID: wacom: Interpret tilt data from Intuos Pro BT as signed values
media: wl128x: Fix atomicity violation in fmc_send_cmd()
usb: dwc3: gadget: Fix checking for number of TRBs left
lib: string_helpers: silence snprintf() output truncation warning
NFSD: Prevent a potential integer overflow
rpmsg: glink: Propagate TX failures in intentless mode as well
um: Fix the return value of elf_core_copy_task_fpregs
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
ubifs: Correct the total block count by deducting journal reservation
ubi: fastmap: Fix duplicate slab cache names while attaching
jffs2: fix use of uninitialized variable
block: return unsigned int from bdev_io_min
9p/xen: fix init sequence
9p/xen: fix release of IRQ
modpost: remove incorrect code in do_eisa_entry()
sh: intc: Fix use-after-free bug in register_intc_controller()
Linux 4.19.325
Change-Id: I50250c8bd11f9ff4b40da75225c1cfb060e0c258
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
503 lines
12 KiB
C
503 lines
12 KiB
C
/*
|
|
* AXI clkgen driver
|
|
*
|
|
* Copyright 2012-2013 Analog Devices Inc.
|
|
* Author: Lars-Peter Clausen <lars@metafoo.de>
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/module.h>
|
|
#include <linux/err.h>
|
|
|
|
#define AXI_CLKGEN_V2_REG_RESET 0x40
|
|
#define AXI_CLKGEN_V2_REG_CLKSEL 0x44
|
|
#define AXI_CLKGEN_V2_REG_DRP_CNTRL 0x70
|
|
#define AXI_CLKGEN_V2_REG_DRP_STATUS 0x74
|
|
|
|
#define AXI_CLKGEN_V2_RESET_MMCM_ENABLE BIT(1)
|
|
#define AXI_CLKGEN_V2_RESET_ENABLE BIT(0)
|
|
|
|
#define AXI_CLKGEN_V2_DRP_CNTRL_SEL BIT(29)
|
|
#define AXI_CLKGEN_V2_DRP_CNTRL_READ BIT(28)
|
|
|
|
#define AXI_CLKGEN_V2_DRP_STATUS_BUSY BIT(16)
|
|
|
|
#define MMCM_REG_CLKOUT0_1 0x08
|
|
#define MMCM_REG_CLKOUT0_2 0x09
|
|
#define MMCM_REG_CLK_FB1 0x14
|
|
#define MMCM_REG_CLK_FB2 0x15
|
|
#define MMCM_REG_CLK_DIV 0x16
|
|
#define MMCM_REG_LOCK1 0x18
|
|
#define MMCM_REG_LOCK2 0x19
|
|
#define MMCM_REG_LOCK3 0x1a
|
|
#define MMCM_REG_FILTER1 0x4e
|
|
#define MMCM_REG_FILTER2 0x4f
|
|
|
|
#define MMCM_CLKOUT_NOCOUNT BIT(6)
|
|
|
|
#define MMCM_CLK_DIV_NOCOUNT BIT(12)
|
|
|
|
struct axi_clkgen {
|
|
void __iomem *base;
|
|
struct clk_hw clk_hw;
|
|
};
|
|
|
|
static uint32_t axi_clkgen_lookup_filter(unsigned int m)
|
|
{
|
|
switch (m) {
|
|
case 0:
|
|
return 0x01001990;
|
|
case 1:
|
|
return 0x01001190;
|
|
case 2:
|
|
return 0x01009890;
|
|
case 3:
|
|
return 0x01001890;
|
|
case 4:
|
|
return 0x01008890;
|
|
case 5 ... 8:
|
|
return 0x01009090;
|
|
case 9 ... 11:
|
|
return 0x01000890;
|
|
case 12:
|
|
return 0x08009090;
|
|
case 13 ... 22:
|
|
return 0x01001090;
|
|
case 23 ... 36:
|
|
return 0x01008090;
|
|
case 37 ... 46:
|
|
return 0x08001090;
|
|
default:
|
|
return 0x08008090;
|
|
}
|
|
}
|
|
|
|
static const uint32_t axi_clkgen_lock_table[] = {
|
|
0x060603e8, 0x060603e8, 0x080803e8, 0x0b0b03e8,
|
|
0x0e0e03e8, 0x111103e8, 0x131303e8, 0x161603e8,
|
|
0x191903e8, 0x1c1c03e8, 0x1f1f0384, 0x1f1f0339,
|
|
0x1f1f02ee, 0x1f1f02bc, 0x1f1f028a, 0x1f1f0271,
|
|
0x1f1f023f, 0x1f1f0226, 0x1f1f020d, 0x1f1f01f4,
|
|
0x1f1f01db, 0x1f1f01c2, 0x1f1f01a9, 0x1f1f0190,
|
|
0x1f1f0190, 0x1f1f0177, 0x1f1f015e, 0x1f1f015e,
|
|
0x1f1f0145, 0x1f1f0145, 0x1f1f012c, 0x1f1f012c,
|
|
0x1f1f012c, 0x1f1f0113, 0x1f1f0113, 0x1f1f0113,
|
|
};
|
|
|
|
static uint32_t axi_clkgen_lookup_lock(unsigned int m)
|
|
{
|
|
if (m < ARRAY_SIZE(axi_clkgen_lock_table))
|
|
return axi_clkgen_lock_table[m];
|
|
return 0x1f1f00fa;
|
|
}
|
|
|
|
static const unsigned int fpfd_min = 10000;
|
|
static const unsigned int fpfd_max = 300000;
|
|
static const unsigned int fvco_min = 600000;
|
|
static const unsigned int fvco_max = 1200000;
|
|
|
|
static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout,
|
|
unsigned int *best_d, unsigned int *best_m, unsigned int *best_dout)
|
|
{
|
|
unsigned long d, d_min, d_max, _d_min, _d_max;
|
|
unsigned long m, m_min, m_max;
|
|
unsigned long f, dout, best_f, fvco;
|
|
|
|
fin /= 1000;
|
|
fout /= 1000;
|
|
|
|
best_f = ULONG_MAX;
|
|
*best_d = 0;
|
|
*best_m = 0;
|
|
*best_dout = 0;
|
|
|
|
d_min = max_t(unsigned long, DIV_ROUND_UP(fin, fpfd_max), 1);
|
|
d_max = min_t(unsigned long, fin / fpfd_min, 80);
|
|
|
|
m_min = max_t(unsigned long, DIV_ROUND_UP(fvco_min, fin) * d_min, 1);
|
|
m_max = min_t(unsigned long, fvco_max * d_max / fin, 64);
|
|
|
|
for (m = m_min; m <= m_max; m++) {
|
|
_d_min = max(d_min, DIV_ROUND_UP(fin * m, fvco_max));
|
|
_d_max = min(d_max, fin * m / fvco_min);
|
|
|
|
for (d = _d_min; d <= _d_max; d++) {
|
|
fvco = fin * m / d;
|
|
|
|
dout = DIV_ROUND_CLOSEST(fvco, fout);
|
|
dout = clamp_t(unsigned long, dout, 1, 128);
|
|
f = fvco / dout;
|
|
if (abs(f - fout) < abs(best_f - fout)) {
|
|
best_f = f;
|
|
*best_d = d;
|
|
*best_m = m;
|
|
*best_dout = dout;
|
|
if (best_f == fout)
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void axi_clkgen_calc_clk_params(unsigned int divider, unsigned int *low,
|
|
unsigned int *high, unsigned int *edge, unsigned int *nocount)
|
|
{
|
|
if (divider == 1)
|
|
*nocount = 1;
|
|
else
|
|
*nocount = 0;
|
|
|
|
*high = divider / 2;
|
|
*edge = divider % 2;
|
|
*low = divider - *high;
|
|
}
|
|
|
|
static void axi_clkgen_write(struct axi_clkgen *axi_clkgen,
|
|
unsigned int reg, unsigned int val)
|
|
{
|
|
writel(val, axi_clkgen->base + reg);
|
|
}
|
|
|
|
static void axi_clkgen_read(struct axi_clkgen *axi_clkgen,
|
|
unsigned int reg, unsigned int *val)
|
|
{
|
|
*val = readl(axi_clkgen->base + reg);
|
|
}
|
|
|
|
static int axi_clkgen_wait_non_busy(struct axi_clkgen *axi_clkgen)
|
|
{
|
|
unsigned int timeout = 10000;
|
|
unsigned int val;
|
|
|
|
do {
|
|
axi_clkgen_read(axi_clkgen, AXI_CLKGEN_V2_REG_DRP_STATUS, &val);
|
|
} while ((val & AXI_CLKGEN_V2_DRP_STATUS_BUSY) && --timeout);
|
|
|
|
if (val & AXI_CLKGEN_V2_DRP_STATUS_BUSY)
|
|
return -EIO;
|
|
|
|
return val & 0xffff;
|
|
}
|
|
|
|
static int axi_clkgen_mmcm_read(struct axi_clkgen *axi_clkgen,
|
|
unsigned int reg, unsigned int *val)
|
|
{
|
|
unsigned int reg_val;
|
|
int ret;
|
|
|
|
ret = axi_clkgen_wait_non_busy(axi_clkgen);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
reg_val = AXI_CLKGEN_V2_DRP_CNTRL_SEL | AXI_CLKGEN_V2_DRP_CNTRL_READ;
|
|
reg_val |= (reg << 16);
|
|
|
|
axi_clkgen_write(axi_clkgen, AXI_CLKGEN_V2_REG_DRP_CNTRL, reg_val);
|
|
|
|
ret = axi_clkgen_wait_non_busy(axi_clkgen);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axi_clkgen_mmcm_write(struct axi_clkgen *axi_clkgen,
|
|
unsigned int reg, unsigned int val, unsigned int mask)
|
|
{
|
|
unsigned int reg_val = 0;
|
|
int ret;
|
|
|
|
ret = axi_clkgen_wait_non_busy(axi_clkgen);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (mask != 0xffff) {
|
|
axi_clkgen_mmcm_read(axi_clkgen, reg, ®_val);
|
|
reg_val &= ~mask;
|
|
}
|
|
|
|
reg_val |= AXI_CLKGEN_V2_DRP_CNTRL_SEL | (reg << 16) | (val & mask);
|
|
|
|
axi_clkgen_write(axi_clkgen, AXI_CLKGEN_V2_REG_DRP_CNTRL, reg_val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void axi_clkgen_mmcm_enable(struct axi_clkgen *axi_clkgen,
|
|
bool enable)
|
|
{
|
|
unsigned int val = AXI_CLKGEN_V2_RESET_ENABLE;
|
|
|
|
if (enable)
|
|
val |= AXI_CLKGEN_V2_RESET_MMCM_ENABLE;
|
|
|
|
axi_clkgen_write(axi_clkgen, AXI_CLKGEN_V2_REG_RESET, val);
|
|
}
|
|
|
|
static struct axi_clkgen *clk_hw_to_axi_clkgen(struct clk_hw *clk_hw)
|
|
{
|
|
return container_of(clk_hw, struct axi_clkgen, clk_hw);
|
|
}
|
|
|
|
static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
|
|
unsigned long rate, unsigned long parent_rate)
|
|
{
|
|
struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
|
|
unsigned int d, m, dout;
|
|
unsigned int nocount;
|
|
unsigned int high;
|
|
unsigned int edge;
|
|
unsigned int low;
|
|
uint32_t filter;
|
|
uint32_t lock;
|
|
|
|
if (parent_rate == 0 || rate == 0)
|
|
return -EINVAL;
|
|
|
|
axi_clkgen_calc_params(parent_rate, rate, &d, &m, &dout);
|
|
|
|
if (d == 0 || dout == 0 || m == 0)
|
|
return -EINVAL;
|
|
|
|
filter = axi_clkgen_lookup_filter(m - 1);
|
|
lock = axi_clkgen_lookup_lock(m - 1);
|
|
|
|
axi_clkgen_calc_clk_params(dout, &low, &high, &edge, &nocount);
|
|
axi_clkgen_mmcm_write(axi_clkgen, MMCM_REG_CLKOUT0_1,
|
|
(high << 6) | low, 0xefff);
|
|
axi_clkgen_mmcm_write(axi_clkgen, MMCM_REG_CLKOUT0_2,
|
|
(edge << 7) | (nocount << 6), 0x03ff);
|
|
|
|
axi_clkgen_calc_clk_params(d, &low, &high, &edge, &nocount);
|
|
axi_clkgen_mmcm_write(axi_clkgen, MMCM_REG_CLK_DIV,
|
|
(edge << 13) | (nocount << 12) | (high << 6) | low, 0x3fff);
|
|
|
|
axi_clkgen_calc_clk_params(m, &low, &high, &edge, &nocount);
|
|
axi_clkgen_mmcm_write(axi_clkgen, MMCM_REG_CLK_FB1,
|
|
(high << 6) | low, 0xefff);
|
|
axi_clkgen_mmcm_write(axi_clkgen, MMCM_REG_CLK_FB2,
|
|
(edge << 7) | (nocount << 6), 0x03ff);
|
|
|
|
axi_clkgen_mmcm_write(axi_clkgen, MMCM_REG_LOCK1, lock & 0x3ff, 0x3ff);
|
|
axi_clkgen_mmcm_write(axi_clkgen, MMCM_REG_LOCK2,
|
|
(((lock >> 16) & 0x1f) << 10) | 0x1, 0x7fff);
|
|
axi_clkgen_mmcm_write(axi_clkgen, MMCM_REG_LOCK3,
|
|
(((lock >> 24) & 0x1f) << 10) | 0x3e9, 0x7fff);
|
|
axi_clkgen_mmcm_write(axi_clkgen, MMCM_REG_FILTER1, filter >> 16, 0x9900);
|
|
axi_clkgen_mmcm_write(axi_clkgen, MMCM_REG_FILTER2, filter, 0x9900);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long axi_clkgen_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *parent_rate)
|
|
{
|
|
unsigned int d, m, dout;
|
|
unsigned long long tmp;
|
|
|
|
axi_clkgen_calc_params(*parent_rate, rate, &d, &m, &dout);
|
|
|
|
if (d == 0 || dout == 0 || m == 0)
|
|
return -EINVAL;
|
|
|
|
tmp = (unsigned long long)*parent_rate * m;
|
|
tmp = DIV_ROUND_CLOSEST_ULL(tmp, dout * d);
|
|
|
|
return min_t(unsigned long long, tmp, LONG_MAX);
|
|
}
|
|
|
|
static unsigned long axi_clkgen_recalc_rate(struct clk_hw *clk_hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
|
|
unsigned int d, m, dout;
|
|
unsigned int reg;
|
|
unsigned long long tmp;
|
|
|
|
axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLKOUT0_2, ®);
|
|
if (reg & MMCM_CLKOUT_NOCOUNT) {
|
|
dout = 1;
|
|
} else {
|
|
axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLKOUT0_1, ®);
|
|
dout = (reg & 0x3f) + ((reg >> 6) & 0x3f);
|
|
}
|
|
|
|
axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_DIV, ®);
|
|
if (reg & MMCM_CLK_DIV_NOCOUNT)
|
|
d = 1;
|
|
else
|
|
d = (reg & 0x3f) + ((reg >> 6) & 0x3f);
|
|
|
|
axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_FB2, ®);
|
|
if (reg & MMCM_CLKOUT_NOCOUNT) {
|
|
m = 1;
|
|
} else {
|
|
axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_FB1, ®);
|
|
m = (reg & 0x3f) + ((reg >> 6) & 0x3f);
|
|
}
|
|
|
|
if (d == 0 || dout == 0)
|
|
return 0;
|
|
|
|
tmp = (unsigned long long)parent_rate * m;
|
|
tmp = DIV_ROUND_CLOSEST_ULL(tmp, dout * d);
|
|
|
|
return min_t(unsigned long long, tmp, ULONG_MAX);
|
|
}
|
|
|
|
static int axi_clkgen_enable(struct clk_hw *clk_hw)
|
|
{
|
|
struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
|
|
|
|
axi_clkgen_mmcm_enable(axi_clkgen, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void axi_clkgen_disable(struct clk_hw *clk_hw)
|
|
{
|
|
struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
|
|
|
|
axi_clkgen_mmcm_enable(axi_clkgen, false);
|
|
}
|
|
|
|
static int axi_clkgen_set_parent(struct clk_hw *clk_hw, u8 index)
|
|
{
|
|
struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
|
|
|
|
axi_clkgen_write(axi_clkgen, AXI_CLKGEN_V2_REG_CLKSEL, index);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 axi_clkgen_get_parent(struct clk_hw *clk_hw)
|
|
{
|
|
struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
|
|
unsigned int parent;
|
|
|
|
axi_clkgen_read(axi_clkgen, AXI_CLKGEN_V2_REG_CLKSEL, &parent);
|
|
|
|
return parent;
|
|
}
|
|
|
|
static const struct clk_ops axi_clkgen_ops = {
|
|
.recalc_rate = axi_clkgen_recalc_rate,
|
|
.round_rate = axi_clkgen_round_rate,
|
|
.set_rate = axi_clkgen_set_rate,
|
|
.enable = axi_clkgen_enable,
|
|
.disable = axi_clkgen_disable,
|
|
.set_parent = axi_clkgen_set_parent,
|
|
.get_parent = axi_clkgen_get_parent,
|
|
};
|
|
|
|
static const struct of_device_id axi_clkgen_ids[] = {
|
|
{
|
|
.compatible = "adi,axi-clkgen-2.00.a",
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, axi_clkgen_ids);
|
|
|
|
static int axi_clkgen_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *id;
|
|
struct axi_clkgen *axi_clkgen;
|
|
struct clk_init_data init = {};
|
|
const char *parent_names[2];
|
|
const char *clk_name;
|
|
struct clk *axi_clk;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
if (!pdev->dev.of_node)
|
|
return -ENODEV;
|
|
|
|
id = of_match_node(axi_clkgen_ids, pdev->dev.of_node);
|
|
if (!id)
|
|
return -ENODEV;
|
|
|
|
axi_clkgen = devm_kzalloc(&pdev->dev, sizeof(*axi_clkgen), GFP_KERNEL);
|
|
if (!axi_clkgen)
|
|
return -ENOMEM;
|
|
|
|
axi_clkgen->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(axi_clkgen->base))
|
|
return PTR_ERR(axi_clkgen->base);
|
|
|
|
init.num_parents = of_clk_get_parent_count(pdev->dev.of_node);
|
|
|
|
axi_clk = devm_clk_get_enabled(&pdev->dev, "s_axi_aclk");
|
|
if (!IS_ERR(axi_clk)) {
|
|
if (init.num_parents < 2 || init.num_parents > 3)
|
|
return -EINVAL;
|
|
|
|
init.num_parents -= 1;
|
|
} else {
|
|
/*
|
|
* Legacy... So that old DTs which do not have clock-names still
|
|
* work. In this case we don't explicitly enable the AXI bus
|
|
* clock.
|
|
*/
|
|
if (PTR_ERR(axi_clk) != -ENOENT)
|
|
return PTR_ERR(axi_clk);
|
|
if (init.num_parents < 1 || init.num_parents > 2)
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < init.num_parents; i++) {
|
|
parent_names[i] = of_clk_get_parent_name(pdev->dev.of_node, i);
|
|
if (!parent_names[i])
|
|
return -EINVAL;
|
|
}
|
|
|
|
clk_name = pdev->dev.of_node->name;
|
|
of_property_read_string(pdev->dev.of_node, "clock-output-names",
|
|
&clk_name);
|
|
|
|
init.name = clk_name;
|
|
init.ops = &axi_clkgen_ops;
|
|
init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
|
|
init.parent_names = parent_names;
|
|
|
|
axi_clkgen_mmcm_enable(axi_clkgen, false);
|
|
|
|
axi_clkgen->clk_hw.init = &init;
|
|
ret = devm_clk_hw_register(&pdev->dev, &axi_clkgen->clk_hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_simple_get,
|
|
&axi_clkgen->clk_hw);
|
|
}
|
|
|
|
static int axi_clkgen_remove(struct platform_device *pdev)
|
|
{
|
|
of_clk_del_provider(pdev->dev.of_node);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver axi_clkgen_driver = {
|
|
.driver = {
|
|
.name = "adi-axi-clkgen",
|
|
.of_match_table = axi_clkgen_ids,
|
|
},
|
|
.probe = axi_clkgen_probe,
|
|
.remove = axi_clkgen_remove,
|
|
};
|
|
module_platform_driver(axi_clkgen_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
|
MODULE_DESCRIPTION("Driver for the Analog Devices' AXI clkgen pcore clock generator");
|