Changes in 4.19.325
netlink: terminate outstanding dump on socket close
ocfs2: uncache inode which has failed entering the group
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K"
media: dvbdev: fix the logic when DVB_DYNAMIC_MINORS is not set
kbuild: Use uname for LINUX_COMPILE_HOST detection
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet
mac80211: fix user-power when emulating chanctx
selftests/watchdog-test: Fix system accidentally reset after watchdog-test
x86/amd_nb: Fix compile-testing without CONFIG_AMD_NB
net: usb: qmi_wwan: add Quectel RG650V
proc/softirqs: replace seq_printf with seq_put_decimal_ull_width
nvme: fix metadata handling in nvme-passthrough
initramfs: avoid filename buffer overrun
m68k: mvme147: Fix SCSI controller IRQ numbers
m68k: mvme16x: Add and use "mvme16x.h"
m68k: mvme147: Reinstate early console
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
s390/syscalls: Avoid creation of arch/arch/ directory
hfsplus: don't query the device logical block size multiple times
EDAC/fsl_ddr: Fix bad bit shift operations
crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY
crypto: cavium - Fix the if condition to exit loop after timeout
crypto: bcm - add error check in the ahash_hmac_init function
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
time: Fix references to _msecs_to_jiffies() handling of values
soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
mmc: mmc_spi: drop buggy snprintf()
ARM: dts: cubieboard4: Fix DCDC5 regulator constraints
regmap: irq: Set lockdep class for hierarchical IRQ domains
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
drm/mm: Mark drm_mm_interval_tree*() functions with __maybe_unused
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
drm/omap: Fix locking in omap_gem_new_dmabuf()
bpf: Fix the xdp_adjust_tail sample prog issue
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_config_scan()
drm/etnaviv: consolidate hardware fence handling in etnaviv_gpu
drm/etnaviv: dump: fix sparse warnings
drm/etnaviv: fix power register offset on GC300
drm/etnaviv: hold GPU lock across perfmon sampling
net: rfkill: gpio: Add check for clk_enable()
ALSA: us122l: Use snd_card_free_when_closed() at disconnection
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
ALSA: 6fire: Release resources at card release
netpoll: Use rcu_access_pointer() in netpoll_poll_lock
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
powerpc/vdso: Flag VDSO64 entry points as functions
mfd: da9052-spi: Change read-mask to write-mask
cpufreq: loongson2: Unregister platform_driver on failure
mtd: rawnand: atmel: Fix possible memory leak
RDMA/bnxt_re: Check cqe flags to know imm_data vs inv_irkey
mfd: rt5033: Fix missing regmap_del_irq_chip()
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: fusion: Remove unused variable 'rc'
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static
fbdev/sh7760fb: Alloc DMA memory from hardware device
fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem()
dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format
dt-bindings: clock: axi-clkgen: include AXI clk
clk: axi-clkgen: use devm_platform_ioremap_resource() short-hand
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
perf probe: Correct demangled symbols in C++ program
PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads
PCI: cpqphp: Fix PCIBIOS_* return value confusion
m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x
m68k: coldfire/device.c: only build FEC when HW macros are defined
rpmsg: glink: Add TX_DATA_CONT command while sending
rpmsg: glink: Send READ_NOTIFY command in FIFO full case
rpmsg: glink: Fix GLINK command prefix
rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length
NFSD: Prevent NULL dereference in nfsd4_process_cb_update()
NFSD: Cap the number of bytes copied by nfs4_reset_recoverydir()
vfio/pci: Properly hide first-in-list PCIe extended capability
power: supply: core: Remove might_sleep() from power_supply_put()
net: usb: lan78xx: Fix memory leak on device unplug by freeing PHY device
tg3: Set coherent DMA mask bits to 31 for BCM57766 chipsets
net: usb: lan78xx: Fix refcounting and autosuspend on invalid WoL configuration
marvell: pxa168_eth: fix call balance of pep->clk handling routines
net: stmmac: dwmac-socfpga: Set RX watchdog interrupt as broken
usb: using mutex lock and supporting O_NONBLOCK flag in iowarrior_read()
USB: chaoskey: fail open after removal
USB: chaoskey: Fix possible deadlock chaoskey_list_lock
misc: apds990x: Fix missing pm_runtime_disable()
apparmor: fix 'Do simple duplicate message elimination'
usb: ehci-spear: fix call balance of sehci clk handling routines
ext4: supress data-race warnings in ext4_free_inodes_{count,set}()
ext4: fix FS_IOC_GETFSMAP handling
jfs: xattr: check invalid xattr size more strictly
ASoC: codecs: Fix atomicity violation in snd_soc_component_get_drvdata()
PCI: Fix use-after-free of slot->bus on hot remove
tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}()
ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices
Revert "usb: gadget: composite: fix OS descriptors w_value logic"
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
netfilter: ipset: add missing range check in bitmap_ip_uadt
spi: Fix acpi deferred irq probe
ubi: wl: Put source PEB into correct list if trying locking LEB failed
um: ubd: Do not use drvdata in release
um: net: Do not use drvdata in release
serial: 8250: omap: Move pm_runtime_get_sync
um: vector: Do not use drvdata in release
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
block: fix ordering between checking BLK_MQ_S_STOPPED request adding
HID: wacom: Interpret tilt data from Intuos Pro BT as signed values
media: wl128x: Fix atomicity violation in fmc_send_cmd()
usb: dwc3: gadget: Fix checking for number of TRBs left
lib: string_helpers: silence snprintf() output truncation warning
NFSD: Prevent a potential integer overflow
rpmsg: glink: Propagate TX failures in intentless mode as well
um: Fix the return value of elf_core_copy_task_fpregs
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
ubifs: Correct the total block count by deducting journal reservation
ubi: fastmap: Fix duplicate slab cache names while attaching
jffs2: fix use of uninitialized variable
block: return unsigned int from bdev_io_min
9p/xen: fix init sequence
9p/xen: fix release of IRQ
modpost: remove incorrect code in do_eisa_entry()
sh: intc: Fix use-after-free bug in register_intc_controller()
Linux 4.19.325
Change-Id: I50250c8bd11f9ff4b40da75225c1cfb060e0c258
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit c64ef7e4851d1a9abbb7f7833e4936973ac5ba79 ]
In order to access the registers of the HW, we need to make sure that
the AXI bus clock is enabled. Hence let's increase the number of clocks
by one.
In order to keep backward compatibility and make sure old DTs still work
we check if clock-names is available or not. If it is, then we can
disambiguate between really having the AXI clock or a parent clock and
so we can enable the bus clock. If not, we fallback to what was done
before and don't explicitly enable the AXI bus clock.
Note that if clock-names is given, the axi clock must be the last one in
the phandle array (also enforced in the DT bindings) so that we can reuse
as much code as possible.
Fixes: 0e646c52cf ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-2-bc5e0733ad76@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This allows adding fields to clk_init_data without having to explicitly
set those fields in all the drivers.
Bug: 150506629
Signed-off-by: Saravana Kannan <saravanak@google.com>
Change-Id: I0ff4e5108541b9f6e3e3e3f984a277b6954a629c
To minimize the rounding error round to the closest integer when
calculating the result in the recalc_rate() and set_rate() callbacks.
Also in order to improve precision multiply first and then divide.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
If the nocount bit is set the divider is bypassed and the settings for the
divider count should be ignored and a divider value of 1 should be assumed.
Handle this correctly in the driver recalc_rate() callback.
While the driver sets up the part so that the read back dividers values
yield the correct result the power-on reset settings of the part might not
reflect this and hence calling e.g. clk_get_rate() without prior calls to
clk_set_rate() will yield the wrong result.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers while registering clks in
these drivers, allowing us to move closer to a clear split of
consumer and provider clk APIs.
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The size of unsigned long on 64-bit architectures is equal to the
size of u64, so this check is impossible there. This throws off
static checkers:
drivers/clk/clk-axi-clkgen.c:331 axi_clkgen_recalc_rate() warn:
impossible condition '(tmp > (~0)) => (0-u64max > u64max)'
Let's change this code to use min_t() instead so that we
get the same effect on architectures where sizeof(unsigned long)
doesn't equal sizeof(u64).
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The clock generator has two clock inputs that can be used as the reference
clock. Add support for switching between them at runtime.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Version 1 of the axi-clkgen core has not been used in new designs for over
two years now. This is a soft peripheral used in FPGAs and anybody who has
updated their kernel to the latest version will also have updated the
bitstream containing the clock generator. So it should be safe to drop
support for this now.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
There is no need to init .owner field.
Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"
This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch adds support for the new v2 version of the axi-clkgen core.
Unfortunately the method of accessing the registers is quite different on v2,
while the content still stays largely the same. So the patch adds a small
abstraction layer which implements the specific read and write functions for v1
and v2 in callback functions.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
This driver adds support for the AXI clkgen pcore to the common clock framework.
The AXI clkgen pcore is a AXI front-end to the MMCM_ADV frequency synthesizer
commonly found in Xilinx FPGAs.
The AXI clkgen pcore is used in Analog Devices' reference designs targeting
Xilinx FPGAs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
