Merge android-4.19-q.85 (8e36d3d) into msm-4.19

* refs/heads/tmp-8e36d3d:
  Documentation: devicetree: Remove unimac-mdio bindings from kernel
  Revert "media: dt-bindings: adv748x: Fix decimal unit addresses"
  Linux 4.19.85
  slcan: Fix memory leak in error path
  memfd: Use radix_tree_deref_slot_protected to avoid the warning.
  net: phy: mdio-bcm-unimac: mark PM functions as __maybe_unused
  s390/vdso: correct vdso mapping for compat tasks
  media: ov2680: fix null dereference at power on
  IB/iser: Fix possible NULL deref at iser_inv_desc()
  fuse: use READ_ONCE on congestion_threshold and max_background
  usb: usbtmc: uninitialized symbol 'actual' in usbtmc_ioctl_clear
  usb: xhci-mtk: fix ISOC error when interval is zero
  netfilter: masquerade: don't flush all conntracks if only one address deleted on device
  rtc: armada38x: fix possible race condition
  rtc: tx4939: fixup nvmem name and register size
  rtc: isl1208: avoid possible sysfs race
  ARM: dts: lpc32xx: Fix SPI controller node names
  arm64: dts: lg: Fix SPI controller node names
  arm64: dts: amd: Fix SPI bus warnings
  scsi: NCR5380: Check for bus reset
  scsi: NCR5380: Handle BUS FREE during reselection
  scsi: NCR5380: Don't call dsprintk() following reselection interrupt
  scsi: NCR5380: Don't clear busy flag when abort fails
  scsi: NCR5380: Check for invalid reselection target
  scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data
  scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE
  scsi: NCR5380: Have NCR5380_select() return a bool
  scsi: NCR5380: Clear all unissued commands on host reset
  iwlwifi: mvm: Allow TKIP for AP mode
  iwlwifi: mvm: use correct FIFO length
  iwlwifi: pcie: fit reclaim msg to MAX_MSG_LEN
  iwlwifi: pcie: gen2: build A-MSDU only for GSO
  iwlwifi: api: annotate compressed BA notif array sizes
  iwlwifi: pcie: read correct prph address for newer devices
  iwlwifi: fix non_shared_ant for 22000 devices
  iwlwifi: dbg: don't crash if the firmware crashes in the middle of a debug dump
  crypto: fix a memory leak in rsa-kcs1pad's encryption mode
  crypto: s5p-sss: Fix Fix argument list alignment
  crypto: s5p-sss: Fix race in error handling
  x86/hyperv: Suppress "PCI: Fatal: No config space access function found"
  Bluetooth: btrsi: fix bt tx timeout issue
  Bluetooth: L2CAP: Detect if remote is not able to use the whole MPS
  Bluetooth: hci_serdev: clear HCI_UART_PROTO_READY to avoid closing proto races
  firmware: dell_rbu: Make payload memory uncachable
  ARM: dts: realview: Fix SPI controller node names
  EDAC: Raise the maximum number of memory controllers
  RDMA: Fix dependencies for rdma_user_mmap_io
  f2fs: mark inode dirty explicitly in recover_inode()
  f2fs: fix to recover inode's project id during POR
  f2fs: update i_size after DIO completion
  PCI/ERR: Run error recovery callbacks for all affected devices
  net: faraday: fix return type of ndo_start_xmit function
  net: smsc: fix return type of ndo_start_xmit function
  ARM: dts: paz00: fix wakeup gpio keycode
  ARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity
  ARM: tegra: apalis_t30: fix mcp2515 can controller interrupt polarity
  ARM: tegra: apalis_t30: fix mmc1 cmd pull-up
  ARM: dts: tegra20: restore address order
  ARM: dts: tegra30: fix xcvr-setup-use-fuses
  arm64: tegra: I2C on Tegra194 is not compatible with Tegra114
  ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string
  arm64: dts: fsl: Fix I2C and SPI bus warnings
  phy: lantiq: Fix compile warning
  f2fs: fix remount problem of option io_bits
  scsi: libsas: always unregister the old device if going to discover new
  iw_cxgb4: Use proper enumerated type in c4iw_bar2_addrs
  vfio/pci: Mask buggy SR-IOV VF INTx support
  vfio/pci: Fix potential memory leak in vfio_msi_cap_len
  vmbus: keep pointer to ring buffer page
  misc: genwqe: should return proper error value.
  misc: kgdbts: Fix restrict error
  silmbus: ngd: register controller after power up.
  slimbus: ngd: return proper error code instead of zero
  slimbus: ngd: register ngd driver only once.
  coresight: dynamic-replicator: Handle multiple connections
  coresight: tmc: Fix byte-address alignment for RRP
  coresight: etm4x: Configure EL2 exception level when kernel is running in HYP
  coresight: tmc-etr: Handle driver mode specific ETR buffers
  coresight: perf: Disable trace path upon source error
  coresight: perf: Fix per cpu path management
  coresight: Fix handling of sinks
  coresight: Use ERR_CAST instead of ERR_PTR
  usb: gadget: uvc: Only halt video streaming endpoint in bulk mode
  usb: gadget: uvc: Factor out video USB request queueing
  ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point
  phy: phy-twl4030-usb: fix denied runtime access
  phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs
  phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs
  ARM: at91: pm: call put_device instead of of_node_put in at91_pm_config_ws
  gpiolib: Fix gpio_direction_* for single direction GPIOs
  i2c: aspeed: fix invalid clock parameters for very large divisors
  ARM: dts: exynos: Correct audio subsystem parent clock on Peach Chromebooks
  usb: gadget: uvc: configfs: Sort frame intervals upon writing
  usb: gadget: uvc: configfs: Prevent format changes after linking header
  usb: gadget: uvc: configfs: Drop leaked references to config items
  ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock
  media: davinci: Fix implicit enum conversion warning
  media: au0828: Fix incorrect error messages
  media: pci: ivtv: Fix a sleep-in-atomic-context bug in ivtv_yuv_init()
  media: imx: work around false-positive warning, again
  mlxsw: Make MLXSW_SP1_FWREV_MINOR a hard requirement
  arm64: dts: rockchip: Fix microSD in rk3399 sapphire board
  MIPS: kexec: Relax memory restriction
  EDAC: Correct DIMM capacity unit symbol
  x86/CPU: Change query logic so CPUID is enabled before testing
  x86/CPU: Use correct macros for Cyrix calls
  net: freescale: fix return type of ndo_start_xmit function
  net: micrel: fix return type of ndo_start_xmit function
  net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider
  samples/bpf: fix compilation failure
  PCI/ERR: Use slot reset if available
  PCI/AER: Don't read upstream ports below fatal errors
  PCI/AER: Take reference on error devices
  bnx2x: Ignore bandwidth attention in single function mode
  ARM: dts: stm32: Fix SPI controller node names
  ARM: dts: clearfog: fix sdhci supply property name
  ARM: dts: stm32: enable display on stm32mp157c-ev1 board
  x86/mce-inject: Reset injection struct after injection
  ARM: dts: marvell: Fix SPI and I2C bus warnings
  crypto: arm/crc32 - avoid warning when compiling with Clang
  cpufeature: avoid warning when compiling with clang
  crypto: chacha20 - Fix chacha20_block() keystream alignment (again)
  spi: pic32: Use proper enum in dmaengine_prep_slave_rg
  ARM: dts: ste: Fix SPI controller node names
  ARM: dts: ux500: Fix LCDA clock line muxing
  ARM: dts: ux500: Correct SCU unit address
  f2fs: fix to recover inode's uid/gid during POR
  f2fs: avoid infinite loop in f2fs_alloc_nid
  ARM: dts: ti: Fix SPI and I2C bus warnings
  ARM: dts: am335x-evm: fix number of cpsw
  PCI: portdrv: Initialize service drivers directly
  mlxsw: spectrum: Init shaper for TCs 8..15
  brcmsmac: Use kvmalloc() for ucode allocations
  brcmfmac: increase buffer for obtaining firmware capabilities
  s390/vdso: correct CFI annotations of vDSO functions
  s390/vdso: avoid 64-bit vdso mapping for compat tasks
  s390/zcrypt: enable AP bus scan without a valid default domain
  usb: usbtmc: Fix ioctl USBTMC_IOCTL_ABORT_BULK_OUT
  usb: chipidea: Fix otg event handler
  usb: chipidea: imx: enable OTG overcurrent in case USB subsystem is already started
  nfp: provide a better warning when ring allocation fails
  net: hns3: Fix parameter type for q_id in hclge_tm_q_to_qs_map_cfg()
  net: hns3: Fix client initialize state issue when roce client initialize failed
  net: hns3: Clear client pointer when initialize client failed or unintialize finished
  net: hns3: Fix cmdq registers initialization issue for vf
  net: hns3: Fix for setting speed for phy failed problem
  net: sun: fix return type of ndo_start_xmit function
  net: amd: fix return type of ndo_start_xmit function
  net: broadcom: fix return type of ndo_start_xmit function
  net: xilinx: fix return type of ndo_start_xmit function
  net: toshiba: fix return type of ndo_start_xmit function
  net: marvell: fix return type of ndo_start_xmit function
  net: mvpp2: fix the number of queues per cpu for PPv2.2
  power: supply: twl4030_charger: disable eoc interrupt on linear charge
  power: supply: twl4030_charger: fix charging current out-of-bounds
  libfdt: Ensure INT_MAX is defined in libfdt_env.h
  of/unittest: Fix I2C bus unit-address error
  OPP: Protect dev_list with opp_table lock
  ARM: dts: atmel: Fix I2C and SPI bus warnings
  RDMA/i40iw: Fix incorrect iterator type
  powerpc: Fix duplicate const clang warning in user access code
  powerpc/pseries: Disable CPU hotplug across migrations
  powerpc/pseries/memory-hotplug: Only update DT once per memory DLPAR request
  powerpc/64s/hash: Fix stab_rr off by one initialization
  selftests/powerpc: Do not fail with reschedule
  powerpc/iommu: Avoid derefence before pointer check
  net: ibm: fix return type of ndo_start_xmit function
  net: cavium: fix return type of ndo_start_xmit function
  net: hns3: fix return type of ndo_start_xmit function
  ipmi: fix return value of ipmi_set_my_LUN
  ipmi:dmi: Ignore IPMI SMBIOS entries with a zero base address
  ipmi_si: fix potential integer overflow on large shift
  ipmi_si_pci: fix NULL device in ipmi_si error message
  ASoC: rt5682: Fix the boost volume at the begining of playback
  spi: mediatek: Don't modify spi_transfer when transfer.
  spi/bcm63xx-hsspi: keep pll clk enabled
  samples/bpf: fix a compilation failure
  arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2
  tty: serial: qcom_geni_serial: Fix serial when not used as console
  serial: mxs-auart: Fix potential infinite loop
  serial: samsung: Enable baud clock for UART reset procedure in resume
  serial: uartps: Fix suspend functionality
  ARM: dts: xilinx: Fix I2C and SPI bus warnings
  PCI: mediatek: Fix unchecked return value
  net: socionext: Fix two sleep-in-atomic-context bugs in ave_rxfifo_reset()
  PCI/ACPI: Correct error message for ASPM disabling
  media: ov2680: don't register the v4l2 subdevice before checking chip ID
  media: vsp1: Fix YCbCr planar formats pitch calculation
  media: vsp1: Fix vsp1_regs.h license header
  s390/qeth: invoke softirqs after napi_schedule()
  s390/qeth: uninstall IRQ handler on device removal
  ath9k: Fix a locking bug in ath9k_add_interface()
  netfilter: nf_tables: avoid BUG_ON usage
  ACPI / LPSS: Exclude I2C busses shared with PUNIT from pmc_atom_d3_mask
  arm64: dts: rockchip: Fix I2C bus unit-address error on rk3399-puma-haikou
  ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036
  scsi: ufshcd: Fix NULL pointer dereference for in ufshcd_init
  ip_gre: fix parsing gre header in ipgre_err
  kernfs: Fix range checks in kernfs_get_target_path
  component: fix loop condition to call unbind() if bind() fails
  power: supply: max8998-charger: Fix platform data retrieval
  power: reset: at91-poweroff: do not procede if at91_shdwc is allocated
  power: supply: ab8500_fg: silence uninitialized variable warnings
  arm64: dts: meson: Fix erroneous SPI bus warnings
  blok, bfq: do not plug I/O if all queues are weight-raised
  block, bfq: inject other-queue I/O into seeky idle queues on NCQ flash
  arm64: fix for bad_mode() handler to always result in panic
  cxgb4: Fix endianness issue in t4_fwcache()
  android: binder: no outgoing transaction when thread todo has transaction
  ARM: dts: sun9i: Fix I2C bus warnings
  pinctrl: at91: don't use the same irqchip with multiple gpiochips
  ARM: dts: sunxi: Fix I2C bus warnings
  ARM: dts: socfpga: Fix I2C bus unit-address error
  powerpc/vdso: Correct call frame information
  ARM: dts: aspeed: Fix I2C bus warnings
  ARM: dts: bcm: Fix SPI bus warnings
  arm64: dts: broadcom: Fix I2C and SPI bus warnings
  drivers: qcom: rpmh-rsc: clear wait_for_compl after use
  soc: qcom: apr: Avoid string overflow
  soc: qcom: wcnss_ctrl: Avoid string overflow
  soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
  soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value
  llc: avoid blocking in llc_sap_close()
  pinctrl: at91-pio4: fix has_config check in atmel_pctl_dt_subnode_to_map()
  arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1
  arm64: dts: renesas: r8a77965: Fix HS-USB compatible
  arm64: dts: renesas: r8a77965: Attach the SYS-DMAC to the IPMMU
  arm64: dts: renesas: salvator-common: adv748x: Override secondary addresses
  ALSA: intel8x0m: Register irq handler after register initializations
  arm64: dts: meson-axg: use the proper compatible for ethmac
  arm64: dts: meson: libretech: update board model
  net: bcmgenet: Fix speed selection for reverse MII
  media: dvb: fix compat ioctl translation
  media: fix: media: pci: meye: validate offset to avoid arbitrary access
  ALSA: hda: Fix implicit definition of pci_iomap() on SH
  media: dt-bindings: adv748x: Fix decimal unit addresses
  nvmem: core: return error code instead of NULL from nvmem_device_get
  Drivers: hv: vmbus: Fix synic per-cpu context initialization
  net: aquantia: fix hw_atl_utils_fw_upload_dwords
  kprobes: Don't call BUG_ON() if there is a kprobe in use on free list
  scsi: pm80xx: Fixed system hang issue during kexec boot
  scsi: pm80xx: Corrected dma_unmap_sg() parameter
  ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
  scsi: sym53c8xx: fix NULL pointer dereference panic in sym_int_sir()
  scsi: lpfc: Fix errors in log messages.
  scsi: lpfc: Correct invalid EQ doorbell write on if_type=6
  scsi: lpfc: Fix GFT_ID and PRLI logic for RSCN
  scsi: qla2xxx: Fix duplicate switch's Nport ID entries
  scsi: qla2xxx: Fix dropped srb resource.
  scsi: qla2xxx: Fix port speed display on chip reset
  scsi: qla2xxx: Check for Register disconnect
  scsi: qla2xxx: Increase abort timeout value
  scsi: qla2xxx: Fix deadlock between ATIO and HW lock
  scsi: qla2xxx: Terminate Plogi/PRLI if WWN is 0
  scsi: qla2xxx: Defer chip reset until target mode is enabled
  scsi: qla2xxx: Fix iIDMA error
  scsi: qla2xxx: Use correct qpair for ABTS/CMD
  f2fs: fix setattr project check upon fssetxattr ioctl
  f2fs: fix memory leak of percpu counter in fill_super()
  f2fs: fix memory leak of write_io in fill_super()
  signal: Properly deliver SIGSEGV from x86 uprobes
  signal: Properly deliver SIGILL from uprobes
  signal: Always ignore SIGKILL and SIGSTOP sent to the global init
  IB/hfi1: Missing return value in error path for user sdma
  RDMA/hns: Fix an error code in hns_roce_v2_init_eq_table()
  dmaengine: at_xdmac: remove a stray bottom half unlock
  ath9k: add back support for using active monitor interfaces for tx99
  rtc: pl030: fix possible race condition
  rtc: mt6397: fix possible race condition
  EDAC, sb_edac: Return early on ADDRV bit and address type test
  dmaengine: dma-jz4780: Further residue status fix
  dmaengine: dma-jz4780: Don't depend on MACH_JZ4780
  usb: mtu3: disable vbus rise/fall interrupts of ltssm
  ARM: dts: exynos: Disable pull control for PMIC IRQ line on Artik5 board
  arm64: dts: rockchip: Fix VCC5V0_HOST_EN on rk3399-sapphire
  firmware: arm_scmi: use strlcpy to ensure NULL-terminated strings
  sched/debug: Use symbolic names for task state constants
  sched/debug: Explicitly cast sched_feat() to bool
  failover: Fix error return code in net_failover_create
  f2fs: submit bio after shutdown
  ARM: dts: omap3-gta04: keep vpll2 always on
  ARM: dts: omap3-gta04: make NAND partitions compatible with recent U-Boot
  ARM: dts: omap3-gta04: fix touchscreen tsc2007
  ARM: dts: omap3-gta04: tvout: enable as display1 alias
  ARM: dts: omap3-gta04: fixes for tvout / venc
  ARM: dts: omap3-gta04: give spi_lcd node a label so that we can overwrite in other DTS files
  of: make PowerMac cache node search conditional on CONFIG_PPC_PMAC
  ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
  ASoC: Intel: hdac_hdmi: Limit sampling rates at dai creation
  ASoC: dapm: Avoid uninitialised variable warning
  udf: Fix crash during mount
  mips: txx9: fix iounmap related issue
  RDMA/core: Follow correct unregister order between sysfs and cgroup
  RDMA/core: Rate limit MAD error messages
  IB/ipoib: Ensure that MTU isn't less than minimum permitted
  IB/mlx5: Don't hold spin lock while checking device state
  i2c: mediatek: Use DMA safe buffers for i2c transactions
  ath10k: wmi: disable softirq's while calling ieee80211_rx
  ARM: dts: exynos: Disable pull control for S5M8767 PMIC
  ath10k: avoid possible memory access violation
  ASoC: sgtl5000: avoid division by zero if lo_vag is zero
  rtnetlink: move type calculation out of loop
  net: lan78xx: Bail out if lan78xx_get_endpoints fails
  f2fs: avoid wrong decrypted data from disk
  cfg80211: validate wmm rule when setting
  mac80211: fix saving a few HE values
  qxl: fix null-pointer crash during suspend
  IB/mlx5: Change TX affinity assignment in RoCE LAG mode
  mtd: rawnand: qcom: don't include dma-direct.h
  mtd: rawnand: fsl_ifc: fixup SRAM init for newer ctrl versions
  mtd: rawnand: fsl_ifc: check result of SRAM initialization
  mtd: rawnand: marvell: use regmap_update_bits() for syscon access
  ARM: dts: meson8b: fix the clock controller register size
  ARM: dts: meson8: fix the clock controller register size
  net: phy: mscc: read 'vsc8531, edge-slowdown' as an u32
  net: phy: mscc: read 'vsc8531,vddmac' as an u32
  net/mlx5: Fix atomic_mode enum values
  net: hns3: Change the dst mac addr of loopback packet
  net: hns3: Fix for loopback selftest failed problem
  net: hns3: Fix error of checking used vlan id
  net: hns3: Fix for multicast failure
  ASoC: rsnd: ssi: Fix issue in dma data address assignment
  soc: imx: gpc: fix PDN delay
  mt76: Fix comparisons with invalid hardware key index
  brcmfmac: fix wrong strnchr usage
  mwifex: free rx_cmd skb in suspended state
  mwifiex: do no submit URB in suspended state
  rtl8187: Fix warning generated when strncpy() destination length matches the sixe argument
  ARM: dts: pxa: fix power i2c base address
  ARM: dts: pxa: fix the rtc controller
  media: ov772x: Disable clk on error path
  media: i2c: Fix pm_runtime_get_if_in_use() usage in sensor drivers
  media: vicodec: fix out-of-range values when decoding
  iwlwifi: mvm: avoid sending too many BARs
  iwlwifi: don't WARN on trying to dump dead firmware
  iwlwifi: drop packets with bad status in CD
  IB/rxe: fixes for rdma read retry
  IB/rxe: avoid back-to-back retries
  i40e: Prevent deleting MAC address from VF when set by PF
  i40evf: cancel workqueue sync for adminq when a VF is removed
  i40e: hold the rtnl lock on clearing interrupt scheme
  i40evf: Don't enable vlan stripping when rx offload is turned on
  i40e: Check and correct speed values for link on open
  i40evf: set IFF_UNICAST_FLT flag for the VF
  i40e: use correct length for strncpy
  i40evf: Validate the number of queues a PF sends
  ARM: dts: exynos: Fix regulators configuration on Peach Pi/Pit Chromebooks
  arm64: dts: stratix10: i2c clock running out of spec
  liquidio: fix race condition in instruction completion processing
  ARM: dts: exynos: Fix sound in Snow-rev5 Chromebook
  ARM: dts: exynos: Fix HDMI-HPD line handling on Arndale
  ARM: dts: exynos: Use i2c-gpio for HDMI-DDC on Arndale
  MIPS: BCM47XX: Enable USB power on Netgear WNDR3400v3
  pinctrl: ingenic: Probe driver at subsys_initcall
  ASoC: AMD: Change MCLK to 48Mhz
  ASoC: meson: axg-fifo: report interrupt request failure
  ASoC: dpcm: Properly initialise hw->rate_max
  ASoC: dapm: Don't fail creating new DAPM control on NULL pinctrl
  ice: Fix and update driver version string
  gfs2: Don't set GFS2_RDF_UPTODATE when the lvb is updated
  ice: Prevent control queue operations during reset
  ice: Update request resource command to latest specification
  ath10k: limit available channels via DT ieee80211-freq-limit
  wil6210: fix invalid memory access for rx_buff_mgmt debugfs
  wil6210: prevent usage of tx ring 0 for eDMA
  wil6210: set edma variables only for Talyn-MB devices
  wil6210: drop Rx multicast packets that are looped-back to STA
  ath9k: fix tx99 with monitor mode interface
  ath10k: skip resetting rx filter for WCN3990
  ALSA: seq: Do error checks at creating system ports
  cfg80211: Avoid regulatory restore when COUNTRY_IE_IGNORE is set
  extcon: cht-wc: Return from default case to avoid warnings
  remoteproc/davinci: Use %zx for formating size_t
  rtc: rv8803: fix the rv8803 id in the OF table
  rtc: sysfs: fix NULL check in rtc_add_groups()
  ARM: dts: at91/trivial: Fix USART1 definition for at91sam9g45
  ARM: dts: rcar: Correct SATA device sizes to 2 MiB
  y2038: make do_gettimeofday() and get_seconds() inline
  arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
  soc/tegra: pmc: Fix pad voltage configuration for Tegra186
  ALSA: pcm: signedness bug in snd_pcm_plug_alloc()
  arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage
  arm64: dts: allwinner: a64: Olinuxino: fix DRAM voltage
  arm64: dts: allwinner: a64: Orange Pi Win: Fix SD card node
  soundwire: intel: Fix uninitialized adev deref
  soundwire: Initialize completion for defer messages
  clk: sunxi-ng: h6: fix PWM gate/reset offset
  iio: dac: mcp4922: fix error handling in mcp4922_write_raw
  ath10k: fix kernel panic by moving pci flush after napi_disable
  tee: optee: take DT status property into account
  iio: adc: max9611: explicitly cast gain_selectors
  mmc: sdhci-of-at91: fix quirk2 overwrite
  mm: hugetlb: switch to css_tryget() in hugetlb_cgroup_charge_cgroup()
  mm: memcg: switch to css_tryget() in get_mem_cgroup_from_mm()
  mm: mempolicy: fix the wrong return value and potential pages leak of mbind
  iommu/vt-d: Fix QI_DEV_IOTLB_PFSID and QI_DEV_EIOTLB_PFSID macros
  net: ethernet: dwmac-sun8i: Use the correct function in exit path
  ecryptfs_lookup_interpose(): lower_dentry->d_parent is not stable either
  ecryptfs_lookup_interpose(): lower_dentry->d_inode is not stable
  i2c: acpi: Force bus speed to 400KHz if a Silead touchscreen is present
  IB/hfi1: Use a common pad buffer for 9B and 16B packets
  IB/hfi1: Ensure full Gen3 speed in a Gen4 system
  Input: synaptics-rmi4 - destroy F54 poller workqueue when removing
  Input: synaptics-rmi4 - clear IRQ enables for F54
  Input: synaptics-rmi4 - do not consume more data than we have (F11, F12)
  Input: synaptics-rmi4 - disable the relative position IRQ in the F12 driver
  Input: synaptics-rmi4 - fix video buffer size
  Input: ff-memless - kill timer in destroy()
  Btrfs: fix log context list corruption after rename exchange operation
  ALSA: usb-audio: Fix incorrect size check for processing/extension units
  ALSA: usb-audio: Fix incorrect NULL check in create_yamaha_midi_quirk()
  ALSA: usb-audio: not submit urb for stopped endpoint
  ALSA: usb-audio: Fix missing error check at mixer resolution test
  slip: Fix memory leak in slip_open error path
  net: usb: qmi_wwan: add support for Foxconn T77W968 LTE modules
  net: gemini: add missed free_netdev
  ipmr: Fix skb headroom in ipmr_get_route().
  ax88172a: fix information leak on short answers
  scsi: core: Handle drivers which set sg_tablesize to zero
  MIPS: BCM63XX: fix switch core reset on BCM6368
  KVM: x86: introduce is_pae_paging

Conflicts:
	drivers/hwtracing/coresight/coresight-etm-perf.c
	drivers/hwtracing/coresight/coresight-tmc-etr.c
	drivers/hwtracing/coresight/coresight-tmc.h
	drivers/hwtracing/coresight/coresight.c
	drivers/net/wireless/ath/wil6210/pcie_bus.c
	drivers/net/wireless/ath/wil6210/txrx.c
	drivers/scsi/ufs/ufshcd.c
	drivers/slimbus/qcom-ngd-ctrl.c
	include/linux/libfdt_env.h

Change-Id: Iba6cbaecffd0ef9fd94503df06397ca4cce9b4fb
Signed-off-by: Ivaylo Georgiev <irgeorgiev@codeaurora.org>

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 84
+SUBLEVEL = 85
 EXTRAVERSION =
 NAME = "People's Front"
 

arch/arm/boot/compressed/libfdt_env.h

@@ -6,6 +6,8 @@
 #include <linux/string.h>
 #include <asm/byteorder.h>
 
+#define INT_MAX			((int)(~0U>>1))
+
 typedef __be16 fdt16_t;
 typedef __be32 fdt32_t;
 typedef __be64 fdt64_t;

arch/arm/boot/dts/am335x-boneblack-common.dtsi

@@ -88,7 +88,7 @@
 };
 
 &i2c0 {
-	tda19988: tda19988 {
+	tda19988: tda19988@70 {
 		compatible = "nxp,tda998x";
 		reg = <0x70>;
 

arch/arm/boot/dts/am335x-evm.dts

@@ -731,6 +731,7 @@
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -738,15 +739,14 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 

arch/arm/boot/dts/am335x-osd3358-sm-red.dts

@@ -161,7 +161,7 @@
 		invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
 	};
 
-	bmp280: pressure@78 {
+	bmp280: pressure@76 {
 		compatible = "bosch,bmp280";
 		reg = <0x76>;
 	};

arch/arm/boot/dts/am335x-pdu001.dts

@@ -373,7 +373,7 @@
 	ti,pindir-d0-out-d1-in;
 	status = "okay";
 
-	cfaf240320a032t {
+	display-controller@0 {
 		compatible = "orisetech,otm3225a";
 		reg = <0>;
 		spi-max-frequency = <1000000>;

arch/arm/boot/dts/am4372.dtsi

@@ -1101,7 +1101,7 @@
 			};
 		};
 
-		qspi: qspi@47900000 {
+		qspi: spi@47900000 {
 			compatible = "ti,am4372-qspi";
 			reg = <0x47900000 0x100>,
 			      <0x30000000 0x4000000>;

arch/arm/boot/dts/am57xx-cl-som-am57x.dts

@@ -518,7 +518,7 @@
 	};
 
 	/* touch controller */
-	ads7846@0 {
+	touchscreen@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ads7846_pins>;
 

arch/arm/boot/dts/arm-realview-eb.dtsi

@@ -371,7 +371,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp: ssp@1000d000 {
+		ssp: spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;

arch/arm/boot/dts/arm-realview-pb1176.dts

@@ -380,7 +380,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		pb1176_ssp: ssp@1010b000 {
+		pb1176_ssp: spi@1010b000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1010b000 0x1000>;
 			interrupt-parent = <&intc_dc1176>;

arch/arm/boot/dts/arm-realview-pb11mp.dts

@@ -523,7 +523,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp@1000d000 {
+		spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			interrupt-parent = <&intc_pb11mp>;

arch/arm/boot/dts/arm-realview-pbx.dtsi

@@ -362,7 +362,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp: ssp@1000d000 {
+		ssp: spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;

arch/arm/boot/dts/armada-388-clearfog.dtsi

@@ -48,7 +48,7 @@
 					     &clearfog_sdhci_cd_pins>;
 				pinctrl-names = "default";
 				status = "okay";
-				vmmc = <&reg_3p3v>;
+				vmmc-supply = <&reg_3p3v>;
 				wp-inverted;
 			};
 

arch/arm/boot/dts/aspeed-g4.dtsi

@@ -350,7 +350,7 @@
 				status = "disabled";
 			};
 
-			i2c: i2c@1e78a000 {
+			i2c: bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;

arch/arm/boot/dts/aspeed-g5.dtsi

@@ -410,7 +410,7 @@
 				status = "disabled";
 			};
 
-			i2c: i2c@1e78a000 {
+			i2c: bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;

arch/arm/boot/dts/at91-dvk_su60_somc.dtsi

@@ -70,9 +70,9 @@
 &i2c1 {
 	status = "okay";
 
-	eeprom@87 {
+	eeprom@57 {
 		compatible = "giantec,gt24c32a", "atmel,24c32";
-		reg = <87>;
+		reg = <0x57>;
 		pagesize = <32>;
 	};
 };

arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi

@@ -59,9 +59,9 @@
 &i2c1 {
 	status = "okay";
 
-	ft5426@56 {
+	ft5426@38 {
 		compatible = "focaltech,ft5426", "edt,edt-ft5406";
-		reg = <56>;
+		reg = <0x38>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
 

arch/arm/boot/dts/at91-vinco.dts

@@ -128,7 +128,7 @@
 			i2c2: i2c@f8024000 {
 				status = "okay";
 
-				rtc1: rtc@64 {
+				rtc1: rtc@32 {
 					compatible = "epson,rx8900";
 					reg = <0x32>;
 				};

arch/arm/boot/dts/at91sam9260ek.dts

@@ -127,7 +127,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@0 {
+				mtd_dataflash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;

arch/arm/boot/dts/at91sam9261ek.dts

@@ -160,7 +160,7 @@
 					spi-max-frequency = <15000000>;
 				};
 
-				tsc2046@0 {
+				tsc2046@2 {
 					reg = <2>;
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;

arch/arm/boot/dts/at91sam9g20ek_common.dtsi

@@ -109,7 +109,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@0 {
+				mtd_dataflash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -570,7 +570,7 @@
 					};
 				};
 
-				uart1 {
+				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
 							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE

arch/arm/boot/dts/bcm-hr2.dtsi

@@ -216,7 +216,7 @@
 			reg = <0x33000 0x14>;
 		};
 
-		qspi: qspi@27200 {
+		qspi: spi@27200 {
 			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,

arch/arm/boot/dts/bcm-nsp.dtsi

@@ -273,7 +273,7 @@
 			brcm,nand-has-wp;
 		};
 
-		qspi: qspi@27200 {
+		qspi: spi@27200 {
 			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,

arch/arm/boot/dts/dove-cubox.dts

@@ -87,7 +87,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	si5351: clock-generator {
+	si5351: clock-generator@60 {
 		compatible = "silabs,si5351a-msop";
 		reg = <0x60>;
 		#address-cells = <1>;

arch/arm/boot/dts/dove.dtsi

@@ -155,7 +155,7 @@
 				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
 				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
 
-			spi0: spi-ctrl@10600 {
+			spi0: spi@10600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -168,7 +168,7 @@
 				status = "disabled";
 			};
 
-			i2c: i2c-ctrl@11000 {
+			i2c: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
@@ -218,7 +218,7 @@
 				status = "disabled";
 			};
 
-			spi1: spi-ctrl@14600 {
+			spi1: spi@14600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm/boot/dts/dra7.dtsi

@@ -1369,7 +1369,7 @@
 			status = "disabled";
 		};
 
-		qspi: qspi@4b300000 {
+		qspi: spi@4b300000 {
 			compatible = "ti,dra7xxx-qspi";
 			reg = <0x4b300000 0x100>,
 			      <0x5c000000 0x4000000>;

arch/arm/boot/dts/exynos3250-artik5.dtsi

@@ -69,6 +69,8 @@
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx3>;
 		interrupts = <5 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps14_irq>;
 		reg = <0x66>;
 
 		s2mps14_osc: clocks {
@@ -350,6 +352,11 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
 		samsung,pin-val = <1>;
 	};
+
+	s2mps14_irq: s2mps14-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &rtc {

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -149,9 +149,11 @@
 };
 
 &hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
 	status = "okay";
-	ddc = <&i2c_2>;
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
+	ddc = <&i2c_ddc>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	vdd_osc-supply = <&ldo10_reg>;
 	vdd_pll-supply = <&ldo8_reg>;
 	vdd-supply = <&ldo8_reg>;
@@ -168,6 +170,8 @@
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq>;
 
 		vinb1-supply = <&main_dc_reg>;
 		vinb2-supply = <&main_dc_reg>;
@@ -452,13 +456,6 @@
 	};
 };
 
-&i2c_2 {
-	status = "okay";
-	/* used by HDMI DDC */
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
 &i2c_3 {
 	status = "okay";
 
@@ -535,6 +532,13 @@
 	cap-sd-highspeed;
 };
 
+&pinctrl_0 {
+	s5m8767_irq: s5m8767-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
 &rtc {
 	status = "okay";
 };
@@ -547,3 +551,22 @@
 	status = "okay";
 	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
 };
+
+&soc {
+	/*
+	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
+	 * controllers. Lets use software I2C over GPIO pins as a workaround.
+	 */
+	i2c_ddc: i2c-gpio {
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_gpio_bus>;
+		status = "okay";
+		compatible = "i2c-gpio";
+		gpios = <&gpa0 6 0 /* sda */
+			 &gpa0 7 0 /* scl */
+			>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};

arch/arm/boot/dts/exynos5250-pinctrl.dtsi

@@ -225,6 +225,12 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
+	i2c2_gpio_bus: i2c2-gpio-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -593,6 +599,11 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
+
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &pinctrl_1 {

arch/arm/boot/dts/exynos5250-snow-rev5.dts

@@ -20,6 +20,14 @@
 
 		samsung,model = "Snow-I2S-MAX98090";
 		samsung,audio-codec = <&max98090>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090 0>, <&hdmi>;
+		};
 	};
 };
 
@@ -31,6 +39,9 @@
 		interrupt-parent = <&gpx0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max98090_irq>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <1>;
 	};
 };
 

arch/arm/boot/dts/exynos5420-peach-pit.dts

@@ -153,7 +153,7 @@
 
 &clock_audss {
 	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
 };
 
 &cpu0 {
@@ -312,6 +312,7 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -333,6 +334,7 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -343,6 +345,7 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;

arch/arm/boot/dts/exynos5800-peach-pi.dts

@@ -153,7 +153,7 @@
 
 &clock_audss {
 	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
 };
 
 &cpu0 {
@@ -312,6 +312,7 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -333,6 +334,7 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -343,6 +345,7 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;

arch/arm/boot/dts/imx51-zii-rdu1.dts

@@ -514,7 +514,7 @@
 	};
 
 	ds1341: rtc@68 {
-		compatible = "maxim,ds1341";
+		compatible = "dallas,ds1341";
 		reg = <0x68>;
 	};
 

arch/arm/boot/dts/imx6ull.dtsi

@@ -22,7 +22,7 @@
 	>;
 	fsl,soc-operating-points = <
 		/* KHz	uV */
-		900000	1175000
+		900000	1250000
 		792000	1175000
 		528000	1175000
 		396000	1175000

arch/arm/boot/dts/keystone-k2g.dtsi

@@ -416,7 +416,7 @@
 			clock-names = "fck", "mmchsdb_fck";
 		};
 
-		qspi: qspi@2940000 {
+		qspi: spi@2940000 {
 			compatible = "ti,k2g-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/lpc32xx.dtsi

@@ -179,7 +179,7 @@
 			 * ssp0 and spi1 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
-			ssp0: ssp@20084000 {
+			ssp0: spi@20084000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x20084000 0x1000>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
@@ -199,7 +199,7 @@
 			 * ssp1 and spi2 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
-			ssp1: ssp@2008c000 {
+			ssp1: spi@2008c000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x2008c000 0x1000>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/meson8.dtsi

@@ -194,7 +194,7 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		compatible = "amlogic,meson8-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x460>;
+		reg = <0x8000 0x4>, <0x4000 0x400>;
 	};
 
 	reset: reset-controller@4404 {

arch/arm/boot/dts/meson8b.dtsi

@@ -163,7 +163,7 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		compatible = "amlogic,meson8b-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x460>;
+		reg = <0x8000 0x4>, <0x4000 0x400>;
 	};
 
 	reset: reset-controller@4404 {

arch/arm/boot/dts/omap2.dtsi

@@ -114,7 +114,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		mcspi1: mcspi@48098000 {
+		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi1";
 			reg = <0x48098000 0x100>;
@@ -125,7 +125,7 @@
 				    "tx2", "rx2", "tx3", "rx3";
 		};
 
-		mcspi2: mcspi@4809a000 {
+		mcspi2: spi@4809a000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi2";
 			reg = <0x4809a000 0x100>;

arch/arm/boot/dts/omap2430.dtsi

@@ -285,7 +285,7 @@
 			ti,timer-alwon;
 		};
 
-		mcspi3: mcspi@480b8000 {
+		mcspi3: spi@480b8000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi3";
 			reg = <0x480b8000 0x100>;

arch/arm/boot/dts/omap3-gta04.dtsi

@@ -28,6 +28,7 @@
 
 	aliases {
 		display0 = &lcd;
+		display1 = &tv0;
 	};
 
 	/* fixed 26MHz oscillator */
@@ -78,7 +79,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	spi_lcd {
+	spi_lcd: spi_lcd {
 		compatible = "spi-gpio";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
@@ -131,7 +132,7 @@
 	};
 
 	tv0: connector {
-		compatible = "svideo-connector";
+		compatible = "composite-video-connector";
 		label = "tv";
 
 		port {
@@ -143,7 +144,7 @@
 
 	tv_amp: opa362 {
 		compatible = "ti,opa362";
-		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;	/* GPIO_23 to enable video out amplifier */
 
 		ports {
 			#address-cells = <1>;
@@ -282,6 +283,13 @@
 			OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
 		>;
 	};
+
+	penirq_pins: pinmux_penirq_pins {
+		pinctrl-single,pins = <
+			/* here we could enable to wakeup the cpu from suspend by a pen touch */
+			OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -422,10 +430,19 @@
 	tsc2007@48 {
 		compatible = "ti,tsc2007";
 		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
-		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;	/* GPIO_160 */
 		ti,x-plate-ohms = <600>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <640>;
+		touchscreen-max-pressure = <1000>;
+		touchscreen-fuzz-x = <3>;
+		touchscreen-fuzz-y = <8>;
+		touchscreen-fuzz-pressure = <10>;
+		touchscreen-inverted-y;
 	};
 
 	/* RFID EEPROM */
@@ -531,6 +548,12 @@
 	regulator-max-microvolt = <3150000>;
 };
 
+/* Needed to power the DPI pins */
+
+&vpll2 {
+	regulator-always-on;
+};
+
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = < &dss_dpi_pins >;
@@ -551,10 +574,14 @@
 
 	vdda-supply = <&vdac>;
 
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	port {
+		reg = <0>;
 		venc_out: endpoint {
 			remote-endpoint = <&opa_in>;
-			ti,channels = <2>;
+			ti,channels = <1>;
 			ti,invert-polarity;
 		};
 	};
@@ -598,22 +625,22 @@
 
 		bootloaders@80000 {
 			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
+			reg = <0x80000 0x1c0000>;
 		};
 
-		bootloaders_env@260000 {
+		bootloaders_env@240000 {
 			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
+			reg = <0x240000 0x40000>;
 		};
 
 		kernel@280000 {
 			label = "Kernel";
-			reg = <0x280000 0x400000>;
+			reg = <0x280000 0x600000>;
 		};
 
-		filesystem@680000 {
+		filesystem@880000 {
 			label = "File System";
-			reg = <0x680000 0xf980000>;
+			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
 		};
 	};
 };

arch/arm/boot/dts/omap3-n9.dts

@@ -40,7 +40,7 @@
 };
 
 &i2c3 {
-	ak8975@0f {
+	ak8975@f {
 		compatible = "asahi-kasei,ak8975";
 		reg = <0x0f>;
 	};

arch/arm/boot/dts/orion5x-linkstation.dtsi

@@ -156,7 +156,7 @@
 &i2c {
 	status = "okay";
 
-	rtc {
+	rtc@32 {
 		compatible = "ricoh,rs5c372a";
 		reg = <0x32>;
 	};

arch/arm/boot/dts/pxa25x.dtsi

@@ -80,6 +80,10 @@
 			#pwm-cells = <1>;
 			clocks = <&clks CLK_PWM1>;
 		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
 	};
 
 	timer@40a00000 {

arch/arm/boot/dts/pxa27x.dtsi

@@ -71,7 +71,7 @@
 			clocks = <&clks CLK_PWM1>;
 		};
 
-		pwri2c: i2c@40f000180 {
+		pwri2c: i2c@40f00180 {
 			compatible = "mrvl,pxa-i2c";
 			reg = <0x40f00180 0x24>;
 			interrupts = <6>;
@@ -113,6 +113,10 @@
 
 			status = "disabled";
 		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
 	};
 
 	clocks {

arch/arm/boot/dts/qcom-ipq4019.dtsi

@@ -313,7 +313,7 @@
 
                 saw0: regulator@b089000 {
                         compatible = "qcom,saw2";
-                        reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
                         regulator;
                 };
 

arch/arm/boot/dts/r8a7779.dtsi

@@ -344,7 +344,7 @@
 
 	sata: sata@fc600000 {
 		compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
-		reg = <0xfc600000 0x2000>;
+		reg = <0xfc600000 0x200000>;
 		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;

arch/arm/boot/dts/r8a7790.dtsi

@@ -1559,7 +1559,7 @@
 		sata0: sata@ee300000 {
 			compatible = "renesas,sata-r8a7790",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee300000 0 0x2000>;
+			reg = <0 0xee300000 0 0x200000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 815>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -1570,7 +1570,7 @@
 		sata1: sata@ee500000 {
 			compatible = "renesas,sata-r8a7790",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee500000 0 0x2000>;
+			reg = <0 0xee500000 0 0x200000>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 814>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;

arch/arm/boot/dts/r8a7791.dtsi

@@ -1543,7 +1543,7 @@
 		sata0: sata@ee300000 {
 			compatible = "renesas,sata-r8a7791",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee300000 0 0x2000>;
+			reg = <0 0xee300000 0 0x200000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 815>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
@@ -1554,7 +1554,7 @@
 		sata1: sata@ee500000 {
 			compatible = "renesas,sata-r8a7791",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee500000 0 0x2000>;
+			reg = <0 0xee500000 0 0x200000>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 814>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;

arch/arm/boot/dts/rk3036.dtsi

@@ -733,7 +733,7 @@
 			/* no rts / cts for uart2 */
 		};
 
-		spi {
+		spi-pins {
 			spi_txd:spi-txd {
 				rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
 			};

arch/arm/boot/dts/rk3188-radxarock.dts

@@ -93,6 +93,8 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
 		startup-delay-us = <100000>;
 		vin-supply = <&vcc_io>;
 	};
@@ -315,6 +317,12 @@
 		};
 	};
 
+	sd0 {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb {
 		host_vbus_drv: host-vbus-drv {
 			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;

arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts

@@ -88,7 +88,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	adxl345: adxl345@0 {
+	adxl345: adxl345@53 {
 		compatible = "adi,adxl345";
 		reg = <0x53>;
 

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -197,7 +197,7 @@
 			      <0xa0410100 0x100>;
 		};
 
-		scu@a04100000 {
+		scu@a0410000 {
 			compatible = "arm,cortex-a9-scu";
 			reg = <0xa0410000 0x100>;
 		};
@@ -878,7 +878,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -892,7 +892,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80003000 {
+		spi@80003000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80003000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/ste-href-family-pinctrl.dtsi

@@ -607,16 +607,20 @@
 
 			mcde {
 				lcd_default_mode: lcd_default {
-					default_mux {
+					default_mux1 {
 						/* Mux in VSI0 and all the data lines */
 						function = "lcd";
 						groups =
 						"lcdvsi0_a_1", /* VSI0 for LCD */
 						"lcd_d0_d7_a_1", /* Data lines */
 						"lcd_d8_d11_a_1", /* TV-out */
-						"lcdaclk_b_1", /* Clock line for TV-out */
 						"lcdvsi1_a_1"; /* VSI1 for HDMI */
 					};
+					default_mux2 {
+						function = "lcda";
+						groups =
+						"lcdaclk_b_1"; /* Clock line for TV-out */
+					};
 					default_cfg1 {
 						pins =
 						"GPIO68_E1", /* VSI0 */

arch/arm/boot/dts/ste-hrefprev60.dtsi

@@ -57,7 +57,7 @@
 			};
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			/*
 			 * On the first generation boards, this SSP/SPI port was connected
 			 * to the AB8500.

arch/arm/boot/dts/ste-snowball.dts

@@ -376,7 +376,7 @@
 			pinctrl-1 = <&i2c3_sleep_mode>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&ssp0_snowball_mode>;
 		};

arch/arm/boot/dts/ste-u300.dts

@@ -442,7 +442,7 @@
 			dma-names = "rx";
 		};
 
-		spi: ssp@c0006000 {
+		spi: spi@c0006000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0xc0006000 0x1000>;
 			interrupt-parent = <&vica>;

arch/arm/boot/dts/stm32mp157c-ev1.dts

@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "stm32mp157c-ed1.dts"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -19,6 +20,58 @@
 		serial0 = &uart4;
 		ethernet0 = &ethernet0;
 	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+		default-on;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cec_pins_a>;
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel-dsi@0 {
+		compatible = "raydium,rm68200";
+		reg = <0>;
+		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+		backlight = <&panel_backlight>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
 };
 
 &ethernet0 {
@@ -40,12 +93,6 @@
 	};
 };
 
-&cec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cec_pins_a>;
-	status = "okay";
-};
-
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -62,6 +109,20 @@
 	status = "okay";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
 &m_can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&m_can1_pins_a>;

arch/arm/boot/dts/stm32mp157c.dtsi

@@ -947,7 +947,7 @@
 			dma-requests = <48>;
 		};
 
-		qspi: qspi@58003000 {
+		qspi: spi@58003000 {
 			compatible = "st,stm32f469-qspi";
 			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
 			reg-names = "qspi", "qspi_mm";

arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi

@@ -92,7 +92,8 @@
 	 */
 	clock-frequency = <400000>;
 
-	touchscreen: touchscreen {
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
 		interrupt-parent = <&pio>;
 		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
 		pinctrl-names = "default";

arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi

@@ -69,7 +69,8 @@
 	 */
 	clock-frequency = <400000>;
 
-	touchscreen: touchscreen@0 {
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
 		interrupt-parent = <&pio>;
 		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
 		pinctrl-names = "default";

arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts

@@ -95,7 +95,7 @@
 &i2c0 {
 	status = "okay";
 
-	axp22x: pmic@68 {
+	axp22x: pmic@34 {
 		compatible = "x-powers,axp221";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;

arch/arm/boot/dts/sun9i-a80.dtsi

@@ -1196,7 +1196,7 @@
 			};
 		};
 
-		r_rsb: i2c@8003400 {
+		r_rsb: rsb@8003400 {
 			compatible = "allwinner,sun8i-a23-rsb";
 			reg = <0x08003400 0x400>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/tegra20-paz00.dts

@@ -524,10 +524,10 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
-			label = "Power";
+		wakeup {
+			label = "Wakeup";
 			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
+			linux,code = <KEY_WAKEUP>;
 			wakeup-source;
 		};
 	};

arch/arm/boot/dts/tegra20.dtsi

@@ -419,19 +419,6 @@
 		status = "disabled";
 	};
 
-	gmi@70009000 {
-		compatible = "nvidia,tegra20-gmi";
-		reg = <0x70009000 0x1000>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xd0000000 0xfffffff>;
-		clocks = <&tegra_car TEGRA20_CLK_NOR>;
-		clock-names = "gmi";
-		resets = <&tegra_car 42>;
-		reset-names = "gmi";
-		status = "disabled";
-	};
-
 	nand-controller@70008000 {
 		compatible = "nvidia,tegra20-nand";
 		reg = <0x70008000 0x100>;
@@ -447,6 +434,19 @@
 		status = "disabled";
 	};
 
+	gmi@70009000 {
+		compatible = "nvidia,tegra20-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xd0000000 0xfffffff>;
+		clocks = <&tegra_car TEGRA20_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		status = "disabled";
+	};
+
 	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;

arch/arm/boot/dts/tegra30-apalis.dtsi

@@ -171,14 +171,14 @@
 
 			/* Apalis MMC1 */
 			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6",
-					      "sdmmc3_cmd_pa7";
+				nvidia,pins = "sdmmc3_clk_pa6";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc3_dat0_pb7 {
-				nvidia,pins = "sdmmc3_dat0_pb7",
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
 					      "sdmmc3_dat1_pb6",
 					      "sdmmc3_dat2_pb5",
 					      "sdmmc3_dat3_pb4",
@@ -659,7 +659,7 @@
 			reg = <1>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
 		};
 	};
@@ -674,7 +674,7 @@
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
 		};
 	};

arch/arm/boot/dts/tegra30-colibri-eval-v3.dts

@@ -79,7 +79,8 @@
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
 		};
 		spidev0: spi@1 {

arch/arm/boot/dts/tegra30.dtsi

@@ -896,7 +896,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <1>;
 		nvidia,xcvr-lsrslew = <1>;
 		nvidia,xcvr-hsslew = <32>;
@@ -933,7 +933,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
 		nvidia,xcvr-hsslew = <32>;
@@ -969,7 +969,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
 		nvidia,xcvr-hsslew = <32>;

arch/arm/boot/dts/versatile-ab.dts

@@ -373,7 +373,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		ssp@101f4000 {
+		spi@101f4000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x101f4000 0x1000>;
 			interrupts = <11>;

arch/arm/boot/dts/zynq-zc702.dts

@@ -174,17 +174,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
-			hwmon@52 {
+			hwmon@34 {
 				compatible = "ti,ucd9248";
-				reg = <52>;
+				reg = <0x34>;
 			};
-			hwmon@53 {
+			hwmon@35 {
 				compatible = "ti,ucd9248";
-				reg = <53>;
+				reg = <0x35>;
 			};
-			hwmon@54 {
+			hwmon@36 {
 				compatible = "ti,ucd9248";
-				reg = <54>;
+				reg = <0x36>;
 			};
 		};
 	};

arch/arm/boot/dts/zynq-zc770-xm010.dts

@@ -68,7 +68,7 @@
 	status = "okay";
 	num-cs = <4>;
 	is-decoded-cs = <0>;
-	flash@0 {
+	flash@1 {
 		compatible = "sst25wf080", "jedec,spi-nor";
 		reg = <1>;
 		spi-max-frequency = <1000000>;

arch/arm/boot/dts/zynq-zc770-xm013.dts

@@ -62,7 +62,7 @@
 	status = "okay";
 	num-cs = <4>;
 	is-decoded-cs = <0>;
-	eeprom: eeprom@0 {
+	eeprom: eeprom@2 {
 		at25,byte-len = <8192>;
 		at25,addr-mode = <2>;
 		at25,page-size = <32>;

arch/arm/crypto/crc32-ce-glue.c

@@ -236,7 +236,7 @@ static void __exit crc32_pmull_mod_exit(void)
 				  ARRAY_SIZE(crc32_pmull_algs));
 }
 
-static const struct cpu_feature crc32_cpu_feature[] = {
+static const struct cpu_feature __maybe_unused crc32_cpu_feature[] = {
 	{ cpu_feature(CRC32) }, { cpu_feature(PMULL) }, { }
 };
 MODULE_DEVICE_TABLE(cpu, crc32_cpu_feature);

arch/arm/mach-at91/pm.c

@@ -143,15 +143,15 @@ static int at91_pm_config_ws(unsigned int pm_mode, bool set)
 
 			/* Check if enabled on SHDWC. */
 			if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit))
-				goto put_node;
+				goto put_device;
 
 			mode |= wsi->pmc_fsmr_bit;
 			if (wsi->set_polarity)
 				polarity |= wsi->pmc_fsmr_bit;
 		}
 
-put_node:
-		of_node_put(np);
+put_device:
+		put_device(&pdev->dev);
 	}
 
 	if (mode) {

arch/arm/mach-imx/pm-imx6.c

@@ -618,6 +618,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 				   IMX6Q_GPR1_GINT);
 }
 
+static void imx6_pm_stby_poweroff(void)
+{
+	imx6_set_lpm(STOP_POWER_OFF);
+	imx6q_suspend_finish(0);
+
+	mdelay(1000);
+
+	pr_emerg("Unable to poweroff system\n");
+}
+
+static int imx6_pm_stby_poweroff_probe(void)
+{
+	if (pm_power_off) {
+		pr_warn("%s: pm_power_off already claimed  %p %pf!\n",
+			__func__, pm_power_off, pm_power_off);
+		return -EBUSY;
+	}
+
+	pm_power_off = imx6_pm_stby_poweroff;
+	return 0;
+}
+
 void __init imx6_pm_ccm_init(const char *ccm_compat)
 {
 	struct device_node *np;
@@ -634,6 +656,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
 	val = readl_relaxed(ccm_base + CLPCR);
 	val &= ~BM_CLPCR_LPM;
 	writel_relaxed(val, ccm_base + CLPCR);
+
+	if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
+		imx6_pm_stby_poweroff_probe();
 }
 
 void __init imx6q_pm_init(void)

arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts

@@ -125,9 +125,9 @@
 
 &reg_dcdc1 {
 	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {

arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts

@@ -142,10 +142,14 @@
 
 /* DCDC3 is polyphased with DCDC2 */
 
+/*
+ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
+ * 1.35V that the PMIC can drive.
+ */
 &reg_dcdc5 {
 	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
+	regulator-min-microvolt = <1360000>;
+	regulator-max-microvolt = <1360000>;
 	regulator-name = "vcc-ddr3";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts

@@ -67,7 +67,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts

@@ -124,6 +124,8 @@
 &i2c1 {
 	status = "okay";
 	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <890>;  /* hcnt */
+	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
 
 	adc@14 {
 		compatible = "lltc,ltc2497";

arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi

@@ -107,7 +107,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		spi0: ssp@e1020000 {
+		spi0: spi@e1020000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1020000 0 0x1000>;
@@ -117,7 +117,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		spi1: ssp@e1030000 {
+		spi1: spi@e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1030000 0 0x1000>;

arch/arm64/boot/dts/amlogic/meson-axg.dtsi

@@ -458,7 +458,7 @@
 		};
 
 		ethmac: ethernet@ff3f0000 {
-			compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+			compatible = "amlogic,meson-axg-dwmac", "snps,dwmac";
 			reg = <0x0 0xff3f0000 0x0 0x10000
 				0x0 0xff634540 0x0 0x8>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -390,7 +390,7 @@
 			};
 		};
 
-		spi_pins: spi {
+		spi_pins: spi-pins {
 			mux {
 				groups = "spi_miso",
 					"spi_mosi",

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

@@ -13,7 +13,7 @@
 
 / {
 	compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
-	model = "Libre Technology CC";
+	model = "Libre Computer Board AML-S905X-CC";
 
 	aliases {
 		serial0 = &uart_AO;

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -337,7 +337,7 @@
 			};
 		};
 
-		spi_pins: spi {
+		spi_pins: spi-pins {
 			mux {
 				groups = "spi_miso",
 					"spi_mosi",

arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi

@@ -639,7 +639,7 @@
 			status = "disabled";
 		};
 
-		ssp0: ssp@66180000 {
+		ssp0: spi@66180000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x66180000 0x1000>;
 			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
@@ -650,7 +650,7 @@
 			status = "disabled";
 		};
 
-		ssp1: ssp@66190000 {
+		ssp1: spi@66190000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x66190000 0x1000>;
 			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi

@@ -138,7 +138,7 @@
 &i2c1 {
 	status = "okay";
 
-	pcf8574: pcf8574@20 {
+	pcf8574: pcf8574@27 {
 		compatible = "nxp,pcf8574a";
 		gpio-controller;
 		#gpio-cells = <2>;

arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi

@@ -520,7 +520,7 @@
 			status = "disabled";
 		};
 
-		ssp0: ssp@180000 {
+		ssp0: spi@180000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x00180000 0x1000>;
 			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
@@ -532,7 +532,7 @@
 			status = "disabled";
 		};
 
-		ssp1: ssp@190000 {
+		ssp1: spi@190000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x00190000 0x1000>;
 			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi

@@ -337,7 +337,7 @@
 			status = "disabled";
 		};
 
-		dspi: dspi@2100000 {
+		dspi: spi@2100000 {
 			compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -284,7 +284,7 @@
 			interrupts = <0 43 0x4>;
 		};
 
-		qspi: quadspi@1550000 {
+		qspi: spi@1550000 {
 			compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -382,7 +382,7 @@
 			ranges = <0x0 0x5 0x00000000 0x8000000>;
 		};
 
-		dspi0: dspi@2100000 {
+		dspi0: spi@2100000 {
 			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -395,7 +395,7 @@
 			status = "disabled";
 		};
 
-		dspi1: dspi@2110000 {
+		dspi1: spi@2110000 {
 			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts

@@ -57,12 +57,12 @@
 		reg = <0x4c>;
 	};
 
-	eeprom@56 {
+	eeprom@52 {
 		compatible = "atmel,24c512";
 		reg = <0x52>;
 	};
 
-	eeprom@57 {
+	eeprom@53 {
 		compatible = "atmel,24c512";
 		reg = <0x53>;
 	};

arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

@@ -202,7 +202,7 @@
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		qspi: quadspi@1550000 {
+		qspi: spi@1550000 {
 			compatible = "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -361,7 +361,7 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		dspi: dspi@2100000 {
+		dspi: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi

@@ -469,7 +469,7 @@
 			mmu-masters = <&fsl_mc 0x300 0>;
 		};
 
-		dspi: dspi@2100000 {
+		dspi: spi@2100000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
 			#address-cells = <1>;
@@ -595,7 +595,7 @@
 				  3 0 0x5 0x20000000 0x00010000>;
 		};
 
-		qspi: quadspi@20c0000 {
+		qspi: spi@20c0000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
 			#address-cells = <1>;

arch/arm64/boot/dts/lg/lg1312.dtsi

@@ -168,14 +168,14 @@
 			clock-names = "apb_pclk";
 			status="disabled";
 		};
-		spi0: ssp@fe800000 {
+		spi0: spi@fe800000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe800000 0x1000>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
 		};
-		spi1: ssp@fe900000 {
+		spi1: spi@fe900000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe900000 0x1000>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/lg/lg1313.dtsi

@@ -168,14 +168,14 @@
 			clock-names = "apb_pclk";
 			status="disabled";
 		};
-		spi0: ssp@fe800000 {
+		spi0: spi@fe800000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe800000 0x1000>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
 		};
-		spi1: ssp@fe900000 {
+		spi1: spi@fe900000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe900000 0x1000>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/nvidia/tegra194.dtsi

@@ -118,7 +118,7 @@
 		};
 
 		gen1_i2c: i2c@3160000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x03160000 0x10000>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -143,7 +143,7 @@
 		};
 
 		cam_i2c: i2c@3180000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x03180000 0x10000>;
 			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -157,7 +157,7 @@
 
 		/* shares pads with dpaux1 */
 		dp_aux_ch1_i2c: i2c@3190000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x03190000 0x10000>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -171,7 +171,7 @@
 
 		/* shares pads with dpaux0 */
 		dp_aux_ch0_i2c: i2c@31b0000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x031b0000 0x10000>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -184,7 +184,7 @@
 		};
 
 		gen7_i2c: i2c@31c0000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x031c0000 0x10000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -197,7 +197,7 @@
 		};
 
 		gen9_i2c: i2c@31e0000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x031e0000 0x10000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -264,7 +264,7 @@
 		};
 
 		gen2_i2c: i2c@c240000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x0c240000 0x10000>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -277,7 +277,7 @@
 		};
 
 		gen8_i2c: i2c@c250000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x0c250000 0x10000>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;

arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi

@@ -282,6 +282,7 @@
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
+		vqmmc-supply = <&vdd_1v8>;
 	};
 
 	clocks {

arch/arm64/boot/dts/renesas/r8a77965.dtsi

@@ -545,7 +545,7 @@
 		};
 
 		hsusb: usb@e6590000 {
-			compatible = "renesas,usbhs-r8a7796",
+			compatible = "renesas,usbhs-r8a77965",
 				     "renesas,rcar-gen3-usbhs";
 			reg = <0 0xe6590000 0 0x100>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
@@ -634,6 +634,14 @@
 			resets = <&cpg 219>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
 		};
 
 		dmac1: dma-controller@e7300000 {
@@ -668,6 +676,14 @@
 			resets = <&cpg 218>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
 		};
 
 		dmac2: dma-controller@e7310000 {
@@ -702,6 +718,14 @@
 			resets = <&cpg 217>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
 		ipmmu_ds0: mmu@e6740000 {
@@ -1455,9 +1479,9 @@
 			compatible = "renesas,usb2-phy-r8a77965",
 				     "renesas,rcar-gen3-usb2-phy";
 			reg = <0 0xee0a0200 0 0x700>;
-			clocks = <&cpg CPG_MOD 703>;
+			clocks = <&cpg CPG_MOD 702>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
+			resets = <&cpg 702>;
 			#phy-cells = <0>;
 			status = "disabled";
 		};

arch/arm64/boot/dts/renesas/salvator-common.dtsi

@@ -420,7 +420,10 @@
 
 	video-receiver@70 {
 		compatible = "adi,adv7482";
-		reg = <0x70>;
+		reg = <0x70 0x71 0x72 0x73 0x74 0x75
+		       0x60 0x61 0x62 0x63 0x64 0x65>;
+		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+			    "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
 
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts

@@ -131,7 +131,7 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	sgtl5000: codec@0a {
+	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 		clocks = <&sgtl5000_clk>;