Changes in 4.19.270
mm/khugepaged: fix GUP-fast interaction by sending IPI
mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths
block: unhash blkdev part inode when the part is deleted
nfp: fix use-after-free in area_cache_get()
ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()
pinctrl: meditatek: Startup with the IRQs disabled
can: sja1000: fix size of OCR_MODE_MASK define
can: mcba_usb: Fix termination command argument
ASoC: ops: Correct bounds check for second channel on SX controls
perf script python: Remove explicit shebang from tests/attr.c
udf: Discard preallocation before extending file with a hole
udf: Fix preallocation discarding at indirect extent boundary
udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size
udf: Fix extending file within last block
usb: gadget: uvc: Prevent buffer overflow in setup handler
USB: serial: option: add Quectel EM05-G modem
USB: serial: cp210x: add Kamstrup RF sniffer PIDs
USB: serial: f81534: fix division by zero on line-speed change
igb: Initialize mailbox message for VF reset
Bluetooth: L2CAP: Fix u8 overflow
net: loopback: use NET_NAME_PREDICTABLE for name_assign_type
usb: musb: remove extra check in musb_gadget_vbus_draw
ARM: dts: qcom: apq8064: fix coresight compatible
drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static
arm: dts: spear600: Fix clcd interrupt
soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe
perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init()
arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators
arm64: dts: mt2712e: Fix unit address for pinctrl node
arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names
arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name
ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: turris-omnia: Add ethernet aliases
ARM: dts: turris-omnia: Add switch port 6 node
pstore/ram: Fix error return code in ramoops_probe()
ARM: mmp: fix timer_read delay
pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
tpm/tpm_crb: Fix error message in __crb_relinquish_locality()
cpuidle: dt: Return the correct numbers of parsed idle states
alpha: fix syscall entry in !AUDUT_SYSCALL case
fs: don't audit the capability check in simple_xattr_list()
selftests/ftrace: event_triggers: wait longer for test_event_enable
perf: Fix possible memleak in pmu_dev_alloc()
timerqueue: Use rb_entry_safe() in timerqueue_getnext()
proc: fixup uptime selftest
ocfs2: fix memory leak in ocfs2_stack_glue_init()
MIPS: vpe-mt: fix possible memory leak while module exiting
MIPS: vpe-cmp: fix possible memory leak while module exiting
PNP: fix name memory leak in pnp_alloc_dev()
perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value
lib/notifier-error-inject: fix error when writing -errno to debugfs file
debugfs: fix error when writing negative value to atomic_t debugfs file
rapidio: fix possible name leaks when rio_add_device() fails
rapidio: rio: fix possible name leak in rio_register_mport()
clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix
xen/events: only register debug interrupt for 2-level events
x86/xen: Fix memory leak in xen_smp_intr_init{_pv}()
x86/xen: Fix memory leak in xen_init_lock_cpu()
xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
PM: runtime: Improve path in rpm_idle() when no callback
PM: runtime: Do not call __rpm_callback() from rpm_idle()
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
MIPS: BCM63xx: Add check for NULL for clk in clk_enable
fs: sysv: Fix sysv_nblocks() returns wrong value
rapidio: fix possible UAF when kfifo_alloc() fails
eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
relay: fix type mismatch when allocating memory in relay_create_buf()
hfs: Fix OOB Write in hfs_asc2mac
rapidio: devices: fix missing put_device in mport_cdev_open
wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()
wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
wifi: rtl8xxxu: Fix reading the vendor of combo chips
pata_ipx4xx_cf: Fix unsigned comparison with less than zero
media: i2c: ad5820: Fix error path
can: kvaser_usb: do not increase tx statistics when sending error message frames
can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event
can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
can: kvaser_usb_leaf: Set Warning state even without bus errors
can: kvaser_usb_leaf: Fix improved state not being reported
can: kvaser_usb_leaf: Fix wrong CAN state after stopping
can: kvaser_usb_leaf: Fix bogus restart events
can: kvaser_usb: Add struct kvaser_usb_busparams
can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
spi: Update reference to struct spi_controller
media: vivid: fix compose size exceed boundary
mtd: Fix device name leak when register device failed in add_mtd_device()
wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
media: camss: Clean up received buffers on failed start of streaming
net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()
drm/radeon: Add the missed acpi_put_table() to fix memory leak
ASoC: pxa: fix null-pointer dereference in filter()
regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()
ima: Fix misuse of dereference of pointer in template_desc_init_fields()
wifi: ath10k: Fix return value in ath10k_pci_init()
mtd: lpddr2_nvm: Fix possible null-ptr-deref
Input: elants_i2c - properly handle the reset GPIO when power is off
media: solo6x10: fix possible memory leak in solo_sysfs_init()
media: platform: exynos4-is: Fix error handling in fimc_md_init()
HID: hid-sensor-custom: set fixed size for custom attributes
ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
bonding: Export skip slave logic to function
mtd: maps: pxa2xx-flash: fix memory leak in probe
drbd: remove call to memset before free device/resource/connection
media: imon: fix a race condition in send_packet()
pinctrl: pinconf-generic: add missing of_node_put()
media: dvb-core: Fix ignored return value in dvb_register_frontend()
media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC
drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe()
NFSv4.2: Fix a memory stomp in decode_attr_security_label
NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
ALSA: asihpi: fix missing pci_disable_device()
drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()
drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
bonding: uninitialized variable in bond_miimon_inspect()
wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails
regulator: core: fix module refcount leak in set_supply()
media: saa7164: fix missing pci_disable_device()
ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
SUNRPC: Fix missing release socket in rpc_sockname()
NFSv4.x: Fail client initialisation if state manager thread can't run
mmc: moxart: fix return value check of mmc_add_host()
mmc: mxcmmc: fix return value check of mmc_add_host()
mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()
mmc: toshsd: fix return value check of mmc_add_host()
mmc: vub300: fix return value check of mmc_add_host()
mmc: wmt-sdmmc: fix return value check of mmc_add_host()
mmc: atmel-mci: fix return value check of mmc_add_host()
mmc: meson-gx: fix return value check of mmc_add_host()
mmc: via-sdmmc: fix return value check of mmc_add_host()
mmc: wbsd: fix return value check of mmc_add_host()
mmc: mmci: fix return value check of mmc_add_host()
media: c8sectpfe: Add of_node_put() when breaking out of loop
media: coda: Add check for dcoda_iram_alloc
media: coda: Add check for kmalloc
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h
rtl8xxxu: add enumeration for channel bandwidth
wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()
blktrace: Fix output non-blktrace event when blk_classic option enabled
clk: socfpga: clk-pll: Remove unused variable 'rc'
clk: socfpga: use clk_hw_register for a5/c5
net: vmw_vsock: vmci: Check memcpy_from_msg()
net: defxx: Fix missing err handling in dfx_init()
drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()
net: farsync: Fix kmemleak when rmmods farsync
net/tunnel: wait until all sk_user_data reader finish before releasing the sock
net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()
net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()
net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()
net: ethernet: dnet: don't call dev_kfree_skb() under spin_lock_irqsave()
hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()
net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()
net: amd-xgbe: Fix logic around active and passive cables
net: amd-xgbe: Check only the minimum speed for active/passive cables
net: lan9303: Fix read error execution path
ntb_netdev: Use dev_kfree_skb_any() in interrupt context
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()
stmmac: fix potential division by 0
apparmor: fix a memleak in multi_transaction_new()
apparmor: fix lockdep warning when removing a namespace
apparmor: Fix abi check to include v8 abi
f2fs: fix normal discard process
RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port
scsi: scsi_debug: Fix a warning in resp_write_scat()
PCI: Check for alloc failure in pci_request_irq()
RDMA/hfi: Decrease PCI device reference count in error path
crypto: ccree - Make cc_debugfs_global_fini() available for module init function
RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
scsi: hpsa: use local workqueues instead of system workqueues
scsi: hpsa: Fix possible memory leak in hpsa_init_one()
crypto: tcrypt - Fix multibuffer skcipher speed test mem leak
scsi: hpsa: Fix error handling in hpsa_add_sas_host()
scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()
scsi: fcoe: Fix possible name leak when device_register() fails
scsi: ipr: Fix WARNING in ipr_init()
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: snic: Fix possible UAF in snic_tgt_create()
RDMA/hfi1: Fix error return code in parse_platform_config()
orangefs: Fix sysfs not cleanup when dev init failed
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
hwrng: amd - Fix PCI device refcount leak
hwrng: geode - Fix PCI device refcount leak
IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
drivers: dio: fix possible memory leak in dio_init()
serial: tegra: avoid reg access when clk disabled
serial: tegra: check for FIFO mode enabled status
serial: tegra: set maximum num of uart ports to 8
serial: tegra: add support to use 8 bytes trigger
serial: tegra: add support to adjust baud rate
serial: tegra: report clk rate errors
serial: tegra: Add PIO mode support
tty: serial: tegra: Activate RX DMA transfer by request
serial: tegra: Read DMA status before terminating
class: fix possible memory leak in __class_register()
vfio: platform: Do not pass return buffer to ACPI _RST method
uio: uio_dmem_genirq: Fix missing unlock in irq configuration
uio: uio_dmem_genirq: Fix deadlock between irq config and handling
usb: fotg210-udc: Fix ages old endianness issues
staging: vme_user: Fix possible UAF in tsi148_dma_list_add
usb: typec: Check for ops->exit instead of ops->enter in altmode_exit
serial: amba-pl011: avoid SBSA UART accessing DMACR register
serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
serial: pch: Fix PCI device refcount leak in pch_request_dma()
tty: serial: clean up stop-tx part in altera_uart_tx_chars()
tty: serial: altera_uart_{r,t}x_chars() need only uart_port
serial: altera_uart: fix locking in polling mode
serial: sunsab: Fix error handling in sunsab_init()
test_firmware: fix memory leak in test_firmware_init()
misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()
misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os
cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
usb: gadget: f_hid: optional SETUP/SET_REPORT mode
usb: gadget: f_hid: fix f_hidg lifetime vs cdev
usb: gadget: f_hid: fix refcount leak on error path
drivers: mcb: fix resource leak in mcb_probe()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
chardev: fix error handling in cdev_device_add()
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
staging: rtl8192u: Fix use after free in ieee80211_rx()
staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()
vme: Fix error not catched in fake_init()
i2c: ismt: Fix an out-of-bounds bug in ismt_access()
usb: storage: Add check for kcalloc
tracing/hist: Fix issue of losting command info in error_log
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
fbdev: ssd1307fb: Drop optional dependency
fbdev: pm2fb: fix missing pci_disable_device()
fbdev: via: Fix error in via_core_init()
fbdev: vermilion: decrease reference count in error path
fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
power: supply: fix residue sysfs file in error handle route of __power_supply_register()
perf symbol: correction while adjusting symbol
HSI: omap_ssi_core: Fix error handling in ssi_init()
include/uapi/linux/swab: Fix potentially missing __always_inline
rtc: snvs: Allow a time difference on clock register read
iommu/amd: Fix pci device refcount leak in ppr_notifier()
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
macintosh: fix possible memory leak in macio_add_one_device()
macintosh/macio-adb: check the return value of ioremap()
powerpc/52xx: Fix a resource leak in an error handling path
cxl: Fix refcount leak in cxl_calc_capp_routing
powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()
powerpc/perf: callchain validate kernel stack pointer bounds
powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe()
powerpc/hv-gpci: Fix hv_gpci event list
selftests/powerpc: Fix resource leaks
rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()
nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
mISDN: hfcsusb: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
mISDN: hfcpci: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
mISDN: hfcmulti: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
nfc: pn533: Clear nfc_target before being used
r6040: Fix kmemleak in probe and remove
rtc: mxc_v2: Add missing clk_disable_unprepare()
openvswitch: Fix flow lookup to use unmasked key
skbuff: Account for tail adjustment during pull operations
net_sched: reject TCF_EM_SIMPLE case for complex ematch module
rxrpc: Fix missing unlock in rxrpc_do_sendmsg()
myri10ge: Fix an error handling path in myri10ge_probe()
net: stream: purge sk_error_queue in sk_stream_kill_queues()
binfmt_misc: fix shift-out-of-bounds in check_special_flags
fs: jfs: fix shift-out-of-bounds in dbAllocAG
udf: Avoid double brelse() in udf_rename()
fs: jfs: fix shift-out-of-bounds in dbDiscardAG
ACPICA: Fix error code path in acpi_ds_call_control_method()
nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()
acct: fix potential integer overflow in encode_comp_t()
hfs: fix OOB Read in __hfs_brec_find
wifi: ath9k: verify the expected usb_endpoints are present
wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
ASoC: codecs: rt298: Add quirk for KBL-R RVP platform
ipmi: fix memleak when unload ipmi driver
bpf: make sure skb->len != 0 when redirecting to a tunneling device
net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
hamradio: baycom_epp: Fix return type of baycom_send_packet()
wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
igb: Do not free q_vector unless new one was allocated
drm/amdgpu: Fix type of second parameter in trans_msg() callback
s390/ctcm: Fix return type of ctc{mp,}m_tx()
s390/netiucv: Fix return type of netiucv_tx()
s390/lcs: Fix return type of lcs_start_xmit()
drm/sti: Use drm_mode_copy()
drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
md/raid1: stop mdx_raid1 thread when raid1 array run failed
mrp: introduce active flags to prevent UAF when applicant uninit
ppp: associate skb with a device at tx
media: dvb-frontends: fix leak of memory fw
media: dvbdev: adopts refcnt to avoid UAF
media: dvb-usb: fix memory leak in dvb_usb_adapter_init()
blk-mq: fix possible memleak when register 'hctx' failed
regulator: core: fix use_count leakage when handling boot-on
mmc: f-sdh30: Add quirks for broken timeout clock capability
media: si470x: Fix use-after-free in si470x_int_in_callback()
clk: st: Fix memory leak in st_of_quadfs_setup()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe()
ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume()
ASoC: wm8994: Fix potential deadlock
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
ASoC: rt5670: Remove unbalanced pm_runtime_put()
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
usb: dwc3: core: defer probe on ulpi_read_id timeout
HID: wacom: Ensure bootloader PID is usable in hidraw mode
reiserfs: Add missing calls to reiserfs_security_free()
iio: adc: ad_sigma_delta: do not use internal iio_dev lock
gcov: add support for checksum field
media: dvbdev: fix build warning due to comments
media: dvbdev: fix refcnt bug
ata: ahci: Fix PCS quirk application for suspend
powerpc/rtas: avoid device tree lookups in rtas_os_term()
powerpc/rtas: avoid scheduling in rtas_os_term()
HID: plantronics: Additional PIDs for double volume key presses quirk
hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount
ovl: Use ovl mounter's fsuid and fsgid in ovl_link()
ALSA: line6: correct midi status byte when receiving data from podxt
ALSA: line6: fix stack overflow in line6_midi_transmit
pnode: terminate at peers of source
md: fix a crash in mempool_free
mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak
tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak
SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails
media: stv0288: use explicitly signed char
soc: qcom: Select REMAP_MMIO for LLCC driver
ktest.pl minconfig: Unset configs instead of just removing them
ARM: ux500: do not directly dereference __iomem
selftests: Use optional USERCFLAGS and USERLDFLAGS
binfmt: Move install_exec_creds after setup_new_exec to match binfmt_elf
binfmt: Fix error return code in load_elf_fdpic_binary()
dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort
dm thin: Use last transaction's pmd->root when commit failed
dm thin: Fix UAF in run_timer_softirq()
dm cache: Fix UAF in destroy()
dm cache: set needs_check flag after aborting metadata
x86/microcode/intel: Do not retry microcode reloading on the APs
tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_line
ARM: 9256/1: NWFPE: avoid compiler-generated __aeabi_uldivmod
media: dvb-core: Fix double free in dvb_register_device()
media: dvb-core: Fix UAF due to refcount races at releasing
cifs: fix confusing debug message
md/bitmap: Fix bitmap chunk size overflow issues
ipmi: fix long wait in unload when IPMI disconnect
ima: Fix a potential NULL pointer access in ima_restore_measurement_list
ipmi: fix use after free in _ipmi_destroy_user()
PCI: Fix pci_device_is_present() for VFs by checking PF
PCI/sysfs: Fix double free in error path
crypto: n2 - add missing hash statesize
iommu/amd: Fix ivrs_acpihid cmdline parsing code
parisc: led: Fix potential null-ptr-deref in start_task()
device_cgroup: Roll back to original exceptions after copy failure
drm/connector: send hotplug uevent on connector cleanup
drm/vmwgfx: Validate the box size for the snooped cursor
ext4: add inode table check in __ext4_get_inode_loc to aovid possible infinite loop
ext4: fix undefined behavior in bit shift for ext4_check_flag_values
ext4: add helper to check quota inums
ext4: fix bug_on in __es_tree_search caused by bad boot loader inode
ext4: init quota for 'old.inode' in 'ext4_rename'
ext4: fix corruption when online resizing a 1K bigalloc fs
ext4: fix error code return to user-space in ext4_get_branch()
ext4: avoid BUG_ON when creating xattrs
ext4: fix inode leak in ext4_xattr_inode_create() on an error path
ext4: initialize quota before expanding inode in setproject ioctl
ext4: avoid unaccounted block allocation when expanding inode
ext4: allocate extended attribute value in vmalloc area
btrfs: send: avoid unnecessary backref lookups when finding clone source
btrfs: replace strncpy() with strscpy()
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
dm thin: resume even if in FAIL mode
perf probe: Use dwarf_attr_integrate as generic DWARF attr accessor
perf probe: Fix to get the DW_AT_decl_file and DW_AT_call_file as unsinged data
ravb: Fix "failed to switch device to config mode" message during unbind
driver core: Set deferred_probe_timeout to a longer default if CONFIG_MODULES is set
ext4: goto right label 'failed_mount3a'
ext4: correct inconsistent error msg in nojournal mode
ext4: use kmemdup() to replace kmalloc + memcpy
mbcache: don't reclaim used entries
mbcache: add functions to delete entry if unused
ext4: remove EA inode entry from mbcache on inode eviction
ext4: unindent codeblock in ext4_xattr_block_set()
ext4: fix race when reusing xattr blocks
mbcache: automatically delete entries from cache on freeing
ext4: fix deadlock due to mbcache entry corruption
SUNRPC: ensure the matching upcall is in-flight upon downcall
bpf: pull before calling skb_postpull_rcsum()
qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failure
nfc: Fix potential resource leaks
net: amd-xgbe: add missed tasklet_kill
net: phy: xgmiitorgmii: Fix refcount leak in xgmiitorgmii_probe
RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
net: sched: atm: dont intepret cls results when asked to drop
usb: rndis_host: Secure rndis_query check against int overflow
caif: fix memory leak in cfctrl_linkup_request()
udf: Fix extension of the last extent in the file
ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet
x86/bugs: Flush IBP in ib_prctl_set()
nfsd: fix handling of readdir in v4root vs. mount upcall timeout
riscv: uaccess: fix type of 0 variable on error in get_user()
ext4: don't allow journal inode to have encrypt flag
hfs/hfsplus: use WARN_ON for sanity check
hfs/hfsplus: avoid WARN_ON() for sanity check, use proper error handling
mbcache: Avoid nesting of cache->c_list_lock under bit locks
parisc: Align parisc MADV_XXX constants with all other architectures
driver core: Fix bus_type.match() error handling in __driver_attach()
net: sched: disallow noqueue for qdisc classes
docs: Fix the docs build with Sphinx 6.0
perf auxtrace: Fix address filter duplicate symbol selection
s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
net/ulp: prevent ULP without clone op from entering the LISTEN status
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
cifs: Fix uninitialized memory read for smb311 posix symlink create
platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probe
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
wifi: wilc1000: sdio: fix module autoloading
ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and later
ktest: Add support for meta characters in GRUB_MENU
ktest: introduce _get_grub_index
ktest: cleanup get_grub_index
ktest: introduce grub2bls REBOOT_TYPE option
ktest.pl: Fix incorrect reboot for grub2bls
kest.pl: Fix grub2 menu handling for rebooting
usb: ulpi: defer ulpi_register on ulpi_read_id timeout
quota: Factor out setup of quota inode
ext4: fix bug_on in __es_tree_search caused by bad quota inode
ext4: lost matching-pair of trace in ext4_truncate
ext4: fix use-after-free in ext4_orphan_cleanup
ext4: fix uninititialized value in 'ext4_evict_inode'
ext4: generalize extents status tree search functions
ext4: add new pending reservation mechanism
ext4: fix reserved cluster accounting at delayed write time
ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline
netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function.
x86/boot: Avoid using Intel mnemonics in AT&T syntax asm
EDAC/device: Fix period calculation in edac_device_reset_delay_period()
regulator: da9211: Use irq handler when ready
hvc/xen: lock console list traversal
nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()
net/mlx5: Rename ptp clock info
net/mlx5: Fix ptp max frequency adjustment range
iommu/mediatek-v1: Add error handle for mtk_iommu_probe
iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()
x86/resctrl: Use task_curr() instead of task_struct->on_cpu to prevent unnecessary IPI
x86/resctrl: Fix task CLOSID/RMID update race
drm/virtio: Fix GEM handle creation UAF
arm64: cmpxchg_double*: hazard against entire exchange variable
efi: fix NULL-deref in init error path
Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"
tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started
serial: tegra: Only print FIFO error message when an error occurs
serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
Linux 4.19.270
Change-Id: Ieb5e7f318a7e06effcc51e5f93751ec02dbb50c4
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
1412 lines
38 KiB
C
1412 lines
38 KiB
C
/*
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
|
* Copyright (c) 2013 Linaro Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This file contains the utility functions to register the pll clocks.
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/hrtimer.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clkdev.h>
|
|
#include "clk.h"
|
|
#include "clk-pll.h"
|
|
|
|
#define PLL_TIMEOUT_MS 10
|
|
|
|
struct samsung_clk_pll {
|
|
struct clk_hw hw;
|
|
void __iomem *lock_reg;
|
|
void __iomem *con_reg;
|
|
/* PLL enable control bit offset in @con_reg register */
|
|
unsigned short enable_offs;
|
|
/* PLL lock status bit offset in @con_reg register */
|
|
unsigned short lock_offs;
|
|
enum samsung_pll_type type;
|
|
unsigned int rate_count;
|
|
const struct samsung_pll_rate_table *rate_table;
|
|
};
|
|
|
|
#define to_clk_pll(_hw) container_of(_hw, struct samsung_clk_pll, hw)
|
|
|
|
static const struct samsung_pll_rate_table *samsung_get_pll_settings(
|
|
struct samsung_clk_pll *pll, unsigned long rate)
|
|
{
|
|
const struct samsung_pll_rate_table *rate_table = pll->rate_table;
|
|
int i;
|
|
|
|
for (i = 0; i < pll->rate_count; i++) {
|
|
if (rate == rate_table[i].rate)
|
|
return &rate_table[i];
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static long samsung_pll_round_rate(struct clk_hw *hw,
|
|
unsigned long drate, unsigned long *prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate_table = pll->rate_table;
|
|
int i;
|
|
|
|
/* Assumming rate_table is in descending order */
|
|
for (i = 0; i < pll->rate_count; i++) {
|
|
if (drate >= rate_table[i].rate)
|
|
return rate_table[i].rate;
|
|
}
|
|
|
|
/* return minimum supported value */
|
|
return rate_table[i - 1].rate;
|
|
}
|
|
|
|
static int samsung_pll3xxx_enable(struct clk_hw *hw)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 tmp;
|
|
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
tmp |= BIT(pll->enable_offs);
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
|
|
/* wait lock time */
|
|
do {
|
|
cpu_relax();
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
} while (!(tmp & BIT(pll->lock_offs)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void samsung_pll3xxx_disable(struct clk_hw *hw)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 tmp;
|
|
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
tmp &= ~BIT(pll->enable_offs);
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
}
|
|
|
|
/*
|
|
* PLL2126 Clock Type
|
|
*/
|
|
|
|
#define PLL2126_MDIV_MASK (0xff)
|
|
#define PLL2126_PDIV_MASK (0x3f)
|
|
#define PLL2126_SDIV_MASK (0x3)
|
|
#define PLL2126_MDIV_SHIFT (16)
|
|
#define PLL2126_PDIV_SHIFT (8)
|
|
#define PLL2126_SDIV_SHIFT (0)
|
|
|
|
static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 pll_con, mdiv, pdiv, sdiv;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK;
|
|
sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK;
|
|
|
|
fvco *= (mdiv + 8);
|
|
do_div(fvco, (pdiv + 2) << sdiv);
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll2126_clk_ops = {
|
|
.recalc_rate = samsung_pll2126_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL3000 Clock Type
|
|
*/
|
|
|
|
#define PLL3000_MDIV_MASK (0xff)
|
|
#define PLL3000_PDIV_MASK (0x3)
|
|
#define PLL3000_SDIV_MASK (0x3)
|
|
#define PLL3000_MDIV_SHIFT (16)
|
|
#define PLL3000_PDIV_SHIFT (8)
|
|
#define PLL3000_SDIV_SHIFT (0)
|
|
|
|
static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 pll_con, mdiv, pdiv, sdiv;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK;
|
|
sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK;
|
|
|
|
fvco *= (2 * (mdiv + 8));
|
|
do_div(fvco, pdiv << sdiv);
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll3000_clk_ops = {
|
|
.recalc_rate = samsung_pll3000_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL35xx Clock Type
|
|
*/
|
|
/* Maximum lock time can be 270 * PDIV cycles */
|
|
#define PLL35XX_LOCK_FACTOR (270)
|
|
|
|
#define PLL35XX_MDIV_MASK (0x3FF)
|
|
#define PLL35XX_PDIV_MASK (0x3F)
|
|
#define PLL35XX_SDIV_MASK (0x7)
|
|
#define PLL35XX_MDIV_SHIFT (16)
|
|
#define PLL35XX_PDIV_SHIFT (8)
|
|
#define PLL35XX_SDIV_SHIFT (0)
|
|
#define PLL35XX_LOCK_STAT_SHIFT (29)
|
|
#define PLL35XX_ENABLE_SHIFT (31)
|
|
|
|
static unsigned long samsung_pll35xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
|
|
sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
|
|
|
|
fvco *= mdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static inline bool samsung_pll35xx_mp_change(
|
|
const struct samsung_pll_rate_table *rate, u32 pll_con)
|
|
{
|
|
u32 old_mdiv, old_pdiv;
|
|
|
|
old_mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
|
|
old_pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
|
|
|
|
return (rate->mdiv != old_mdiv || rate->pdiv != old_pdiv);
|
|
}
|
|
|
|
static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate;
|
|
u32 tmp;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
|
|
if (!(samsung_pll35xx_mp_change(rate, tmp))) {
|
|
/* If only s change, change just s value only*/
|
|
tmp &= ~(PLL35XX_SDIV_MASK << PLL35XX_SDIV_SHIFT);
|
|
tmp |= rate->sdiv << PLL35XX_SDIV_SHIFT;
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set PLL lock time. */
|
|
writel_relaxed(rate->pdiv * PLL35XX_LOCK_FACTOR,
|
|
pll->lock_reg);
|
|
|
|
/* Change PLL PMS values */
|
|
tmp &= ~((PLL35XX_MDIV_MASK << PLL35XX_MDIV_SHIFT) |
|
|
(PLL35XX_PDIV_MASK << PLL35XX_PDIV_SHIFT) |
|
|
(PLL35XX_SDIV_MASK << PLL35XX_SDIV_SHIFT));
|
|
tmp |= (rate->mdiv << PLL35XX_MDIV_SHIFT) |
|
|
(rate->pdiv << PLL35XX_PDIV_SHIFT) |
|
|
(rate->sdiv << PLL35XX_SDIV_SHIFT);
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
|
|
/* Wait until the PLL is locked if it is enabled. */
|
|
if (tmp & BIT(pll->enable_offs)) {
|
|
do {
|
|
cpu_relax();
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
} while (!(tmp & BIT(pll->lock_offs)));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll35xx_clk_ops = {
|
|
.recalc_rate = samsung_pll35xx_recalc_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_pll35xx_set_rate,
|
|
.enable = samsung_pll3xxx_enable,
|
|
.disable = samsung_pll3xxx_disable,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll35xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll35xx_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL36xx Clock Type
|
|
*/
|
|
/* Maximum lock time can be 3000 * PDIV cycles */
|
|
#define PLL36XX_LOCK_FACTOR (3000)
|
|
|
|
#define PLL36XX_KDIV_MASK (0xFFFF)
|
|
#define PLL36XX_MDIV_MASK (0x1FF)
|
|
#define PLL36XX_PDIV_MASK (0x3F)
|
|
#define PLL36XX_SDIV_MASK (0x7)
|
|
#define PLL36XX_MDIV_SHIFT (16)
|
|
#define PLL36XX_PDIV_SHIFT (8)
|
|
#define PLL36XX_SDIV_SHIFT (0)
|
|
#define PLL36XX_KDIV_SHIFT (0)
|
|
#define PLL36XX_LOCK_STAT_SHIFT (29)
|
|
#define PLL36XX_ENABLE_SHIFT (31)
|
|
|
|
static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con0, pll_con1;
|
|
s16 kdiv;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con1 = readl_relaxed(pll->con_reg + 4);
|
|
mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
|
|
pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
|
|
sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
|
|
kdiv = (s16)(pll_con1 & PLL36XX_KDIV_MASK);
|
|
|
|
fvco *= (mdiv << 16) + kdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
fvco >>= 16;
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static inline bool samsung_pll36xx_mpk_change(
|
|
const struct samsung_pll_rate_table *rate, u32 pll_con0, u32 pll_con1)
|
|
{
|
|
u32 old_mdiv, old_pdiv, old_kdiv;
|
|
|
|
old_mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
|
|
old_pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
|
|
old_kdiv = (pll_con1 >> PLL36XX_KDIV_SHIFT) & PLL36XX_KDIV_MASK;
|
|
|
|
return (rate->mdiv != old_mdiv || rate->pdiv != old_pdiv ||
|
|
rate->kdiv != old_kdiv);
|
|
}
|
|
|
|
static int samsung_pll36xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 tmp, pll_con0, pll_con1;
|
|
const struct samsung_pll_rate_table *rate;
|
|
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con1 = readl_relaxed(pll->con_reg + 4);
|
|
|
|
if (!(samsung_pll36xx_mpk_change(rate, pll_con0, pll_con1))) {
|
|
/* If only s change, change just s value only*/
|
|
pll_con0 &= ~(PLL36XX_SDIV_MASK << PLL36XX_SDIV_SHIFT);
|
|
pll_con0 |= (rate->sdiv << PLL36XX_SDIV_SHIFT);
|
|
writel_relaxed(pll_con0, pll->con_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set PLL lock time. */
|
|
writel_relaxed(rate->pdiv * PLL36XX_LOCK_FACTOR, pll->lock_reg);
|
|
|
|
/* Change PLL PMS values */
|
|
pll_con0 &= ~((PLL36XX_MDIV_MASK << PLL36XX_MDIV_SHIFT) |
|
|
(PLL36XX_PDIV_MASK << PLL36XX_PDIV_SHIFT) |
|
|
(PLL36XX_SDIV_MASK << PLL36XX_SDIV_SHIFT));
|
|
pll_con0 |= (rate->mdiv << PLL36XX_MDIV_SHIFT) |
|
|
(rate->pdiv << PLL36XX_PDIV_SHIFT) |
|
|
(rate->sdiv << PLL36XX_SDIV_SHIFT);
|
|
writel_relaxed(pll_con0, pll->con_reg);
|
|
|
|
pll_con1 &= ~(PLL36XX_KDIV_MASK << PLL36XX_KDIV_SHIFT);
|
|
pll_con1 |= rate->kdiv << PLL36XX_KDIV_SHIFT;
|
|
writel_relaxed(pll_con1, pll->con_reg + 4);
|
|
|
|
/* wait_lock_time */
|
|
if (pll_con0 & BIT(pll->enable_offs)) {
|
|
do {
|
|
cpu_relax();
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
} while (!(tmp & BIT(pll->lock_offs)));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll36xx_clk_ops = {
|
|
.recalc_rate = samsung_pll36xx_recalc_rate,
|
|
.set_rate = samsung_pll36xx_set_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.enable = samsung_pll3xxx_enable,
|
|
.disable = samsung_pll3xxx_disable,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll36xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll36xx_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL45xx Clock Type
|
|
*/
|
|
#define PLL4502_LOCK_FACTOR 400
|
|
#define PLL4508_LOCK_FACTOR 240
|
|
|
|
#define PLL45XX_MDIV_MASK (0x3FF)
|
|
#define PLL45XX_PDIV_MASK (0x3F)
|
|
#define PLL45XX_SDIV_MASK (0x7)
|
|
#define PLL45XX_AFC_MASK (0x1F)
|
|
#define PLL45XX_MDIV_SHIFT (16)
|
|
#define PLL45XX_PDIV_SHIFT (8)
|
|
#define PLL45XX_SDIV_SHIFT (0)
|
|
#define PLL45XX_AFC_SHIFT (0)
|
|
|
|
#define PLL45XX_ENABLE BIT(31)
|
|
#define PLL45XX_LOCKED BIT(29)
|
|
|
|
static unsigned long samsung_pll45xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
|
|
sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
|
|
|
|
if (pll->type == pll_4508)
|
|
sdiv = sdiv - 1;
|
|
|
|
fvco *= mdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static bool samsung_pll45xx_mp_change(u32 pll_con0, u32 pll_con1,
|
|
const struct samsung_pll_rate_table *rate)
|
|
{
|
|
u32 old_mdiv, old_pdiv, old_afc;
|
|
|
|
old_mdiv = (pll_con0 >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
|
|
old_pdiv = (pll_con0 >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
|
|
old_afc = (pll_con1 >> PLL45XX_AFC_SHIFT) & PLL45XX_AFC_MASK;
|
|
|
|
return (old_mdiv != rate->mdiv || old_pdiv != rate->pdiv
|
|
|| old_afc != rate->afc);
|
|
}
|
|
|
|
static int samsung_pll45xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate;
|
|
u32 con0, con1;
|
|
ktime_t start;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
con0 = readl_relaxed(pll->con_reg);
|
|
con1 = readl_relaxed(pll->con_reg + 0x4);
|
|
|
|
if (!(samsung_pll45xx_mp_change(con0, con1, rate))) {
|
|
/* If only s change, change just s value only*/
|
|
con0 &= ~(PLL45XX_SDIV_MASK << PLL45XX_SDIV_SHIFT);
|
|
con0 |= rate->sdiv << PLL45XX_SDIV_SHIFT;
|
|
writel_relaxed(con0, pll->con_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set PLL PMS values. */
|
|
con0 &= ~((PLL45XX_MDIV_MASK << PLL45XX_MDIV_SHIFT) |
|
|
(PLL45XX_PDIV_MASK << PLL45XX_PDIV_SHIFT) |
|
|
(PLL45XX_SDIV_MASK << PLL45XX_SDIV_SHIFT));
|
|
con0 |= (rate->mdiv << PLL45XX_MDIV_SHIFT) |
|
|
(rate->pdiv << PLL45XX_PDIV_SHIFT) |
|
|
(rate->sdiv << PLL45XX_SDIV_SHIFT);
|
|
|
|
/* Set PLL AFC value. */
|
|
con1 = readl_relaxed(pll->con_reg + 0x4);
|
|
con1 &= ~(PLL45XX_AFC_MASK << PLL45XX_AFC_SHIFT);
|
|
con1 |= (rate->afc << PLL45XX_AFC_SHIFT);
|
|
|
|
/* Set PLL lock time. */
|
|
switch (pll->type) {
|
|
case pll_4502:
|
|
writel_relaxed(rate->pdiv * PLL4502_LOCK_FACTOR, pll->lock_reg);
|
|
break;
|
|
case pll_4508:
|
|
writel_relaxed(rate->pdiv * PLL4508_LOCK_FACTOR, pll->lock_reg);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Set new configuration. */
|
|
writel_relaxed(con1, pll->con_reg + 0x4);
|
|
writel_relaxed(con0, pll->con_reg);
|
|
|
|
/* Wait for locking. */
|
|
start = ktime_get();
|
|
while (!(readl_relaxed(pll->con_reg) & PLL45XX_LOCKED)) {
|
|
ktime_t delta = ktime_sub(ktime_get(), start);
|
|
|
|
if (ktime_to_ms(delta) > PLL_TIMEOUT_MS) {
|
|
pr_err("%s: could not lock PLL %s\n",
|
|
__func__, clk_hw_get_name(hw));
|
|
return -EFAULT;
|
|
}
|
|
|
|
cpu_relax();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll45xx_clk_ops = {
|
|
.recalc_rate = samsung_pll45xx_recalc_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_pll45xx_set_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll45xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll45xx_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL46xx Clock Type
|
|
*/
|
|
#define PLL46XX_LOCK_FACTOR 3000
|
|
|
|
#define PLL46XX_VSEL_MASK (1)
|
|
#define PLL46XX_MDIV_MASK (0x1FF)
|
|
#define PLL1460X_MDIV_MASK (0x3FF)
|
|
|
|
#define PLL46XX_PDIV_MASK (0x3F)
|
|
#define PLL46XX_SDIV_MASK (0x7)
|
|
#define PLL46XX_VSEL_SHIFT (27)
|
|
#define PLL46XX_MDIV_SHIFT (16)
|
|
#define PLL46XX_PDIV_SHIFT (8)
|
|
#define PLL46XX_SDIV_SHIFT (0)
|
|
|
|
#define PLL46XX_KDIV_MASK (0xFFFF)
|
|
#define PLL4650C_KDIV_MASK (0xFFF)
|
|
#define PLL46XX_KDIV_SHIFT (0)
|
|
#define PLL46XX_MFR_MASK (0x3F)
|
|
#define PLL46XX_MRR_MASK (0x1F)
|
|
#define PLL46XX_KDIV_SHIFT (0)
|
|
#define PLL46XX_MFR_SHIFT (16)
|
|
#define PLL46XX_MRR_SHIFT (24)
|
|
|
|
#define PLL46XX_ENABLE BIT(31)
|
|
#define PLL46XX_LOCKED BIT(29)
|
|
#define PLL46XX_VSEL BIT(27)
|
|
|
|
static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1, shift;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con1 = readl_relaxed(pll->con_reg + 4);
|
|
mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & ((pll->type == pll_1460x) ?
|
|
PLL1460X_MDIV_MASK : PLL46XX_MDIV_MASK);
|
|
pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
|
|
sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
|
|
kdiv = pll->type == pll_4650c ? pll_con1 & PLL4650C_KDIV_MASK :
|
|
pll_con1 & PLL46XX_KDIV_MASK;
|
|
|
|
shift = ((pll->type == pll_4600) || (pll->type == pll_1460x)) ? 16 : 10;
|
|
|
|
fvco *= (mdiv << shift) + kdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
fvco >>= shift;
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static bool samsung_pll46xx_mpk_change(u32 pll_con0, u32 pll_con1,
|
|
const struct samsung_pll_rate_table *rate)
|
|
{
|
|
u32 old_mdiv, old_pdiv, old_kdiv;
|
|
|
|
old_mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
|
|
old_pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
|
|
old_kdiv = (pll_con1 >> PLL46XX_KDIV_SHIFT) & PLL46XX_KDIV_MASK;
|
|
|
|
return (old_mdiv != rate->mdiv || old_pdiv != rate->pdiv
|
|
|| old_kdiv != rate->kdiv);
|
|
}
|
|
|
|
static int samsung_pll46xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate;
|
|
u32 con0, con1, lock;
|
|
ktime_t start;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
con0 = readl_relaxed(pll->con_reg);
|
|
con1 = readl_relaxed(pll->con_reg + 0x4);
|
|
|
|
if (!(samsung_pll46xx_mpk_change(con0, con1, rate))) {
|
|
/* If only s change, change just s value only*/
|
|
con0 &= ~(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
|
|
con0 |= rate->sdiv << PLL46XX_SDIV_SHIFT;
|
|
writel_relaxed(con0, pll->con_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set PLL lock time. */
|
|
lock = rate->pdiv * PLL46XX_LOCK_FACTOR;
|
|
if (lock > 0xffff)
|
|
/* Maximum lock time bitfield is 16-bit. */
|
|
lock = 0xffff;
|
|
|
|
/* Set PLL PMS and VSEL values. */
|
|
if (pll->type == pll_1460x) {
|
|
con0 &= ~((PLL1460X_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
|
|
(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
|
|
(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT));
|
|
} else {
|
|
con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
|
|
(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
|
|
(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT) |
|
|
(PLL46XX_VSEL_MASK << PLL46XX_VSEL_SHIFT));
|
|
con0 |= rate->vsel << PLL46XX_VSEL_SHIFT;
|
|
}
|
|
|
|
con0 |= (rate->mdiv << PLL46XX_MDIV_SHIFT) |
|
|
(rate->pdiv << PLL46XX_PDIV_SHIFT) |
|
|
(rate->sdiv << PLL46XX_SDIV_SHIFT);
|
|
|
|
/* Set PLL K, MFR and MRR values. */
|
|
con1 = readl_relaxed(pll->con_reg + 0x4);
|
|
con1 &= ~((PLL46XX_KDIV_MASK << PLL46XX_KDIV_SHIFT) |
|
|
(PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT) |
|
|
(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT));
|
|
con1 |= (rate->kdiv << PLL46XX_KDIV_SHIFT) |
|
|
(rate->mfr << PLL46XX_MFR_SHIFT) |
|
|
(rate->mrr << PLL46XX_MRR_SHIFT);
|
|
|
|
/* Write configuration to PLL */
|
|
writel_relaxed(lock, pll->lock_reg);
|
|
writel_relaxed(con0, pll->con_reg);
|
|
writel_relaxed(con1, pll->con_reg + 0x4);
|
|
|
|
/* Wait for locking. */
|
|
start = ktime_get();
|
|
while (!(readl_relaxed(pll->con_reg) & PLL46XX_LOCKED)) {
|
|
ktime_t delta = ktime_sub(ktime_get(), start);
|
|
|
|
if (ktime_to_ms(delta) > PLL_TIMEOUT_MS) {
|
|
pr_err("%s: could not lock PLL %s\n",
|
|
__func__, clk_hw_get_name(hw));
|
|
return -EFAULT;
|
|
}
|
|
|
|
cpu_relax();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll46xx_clk_ops = {
|
|
.recalc_rate = samsung_pll46xx_recalc_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_pll46xx_set_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll46xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll46xx_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL6552 Clock Type
|
|
*/
|
|
|
|
#define PLL6552_MDIV_MASK 0x3ff
|
|
#define PLL6552_PDIV_MASK 0x3f
|
|
#define PLL6552_SDIV_MASK 0x7
|
|
#define PLL6552_MDIV_SHIFT 16
|
|
#define PLL6552_MDIV_SHIFT_2416 14
|
|
#define PLL6552_PDIV_SHIFT 8
|
|
#define PLL6552_PDIV_SHIFT_2416 5
|
|
#define PLL6552_SDIV_SHIFT 0
|
|
|
|
static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
if (pll->type == pll_6552_s3c2416) {
|
|
mdiv = (pll_con >> PLL6552_MDIV_SHIFT_2416) & PLL6552_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL6552_PDIV_SHIFT_2416) & PLL6552_PDIV_MASK;
|
|
} else {
|
|
mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK;
|
|
}
|
|
sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK;
|
|
|
|
fvco *= mdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll6552_clk_ops = {
|
|
.recalc_rate = samsung_pll6552_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL6553 Clock Type
|
|
*/
|
|
|
|
#define PLL6553_MDIV_MASK 0xff
|
|
#define PLL6553_PDIV_MASK 0x3f
|
|
#define PLL6553_SDIV_MASK 0x7
|
|
#define PLL6553_KDIV_MASK 0xffff
|
|
#define PLL6553_MDIV_SHIFT 16
|
|
#define PLL6553_PDIV_SHIFT 8
|
|
#define PLL6553_SDIV_SHIFT 0
|
|
#define PLL6553_KDIV_SHIFT 0
|
|
|
|
static unsigned long samsung_pll6553_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con1 = readl_relaxed(pll->con_reg + 0x4);
|
|
mdiv = (pll_con0 >> PLL6553_MDIV_SHIFT) & PLL6553_MDIV_MASK;
|
|
pdiv = (pll_con0 >> PLL6553_PDIV_SHIFT) & PLL6553_PDIV_MASK;
|
|
sdiv = (pll_con0 >> PLL6553_SDIV_SHIFT) & PLL6553_SDIV_MASK;
|
|
kdiv = (pll_con1 >> PLL6553_KDIV_SHIFT) & PLL6553_KDIV_MASK;
|
|
|
|
fvco *= (mdiv << 16) + kdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
fvco >>= 16;
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll6553_clk_ops = {
|
|
.recalc_rate = samsung_pll6553_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL Clock Type of S3C24XX before S3C2443
|
|
*/
|
|
|
|
#define PLLS3C2410_MDIV_MASK (0xff)
|
|
#define PLLS3C2410_PDIV_MASK (0x1f)
|
|
#define PLLS3C2410_SDIV_MASK (0x3)
|
|
#define PLLS3C2410_MDIV_SHIFT (12)
|
|
#define PLLS3C2410_PDIV_SHIFT (4)
|
|
#define PLLS3C2410_SDIV_SHIFT (0)
|
|
|
|
#define PLLS3C2410_ENABLE_REG_OFFSET 0x10
|
|
|
|
static unsigned long samsung_s3c2410_pll_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 pll_con, mdiv, pdiv, sdiv;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
|
|
pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
|
|
sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
|
|
|
|
fvco *= (mdiv + 8);
|
|
do_div(fvco, (pdiv + 2) << sdiv);
|
|
|
|
return (unsigned int)fvco;
|
|
}
|
|
|
|
static unsigned long samsung_s3c2440_mpll_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 pll_con, mdiv, pdiv, sdiv;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
|
|
pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
|
|
sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
|
|
|
|
fvco *= (2 * (mdiv + 8));
|
|
do_div(fvco, (pdiv + 2) << sdiv);
|
|
|
|
return (unsigned int)fvco;
|
|
}
|
|
|
|
static int samsung_s3c2410_pll_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate;
|
|
u32 tmp;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
|
|
/* Change PLL PMS values */
|
|
tmp &= ~((PLLS3C2410_MDIV_MASK << PLLS3C2410_MDIV_SHIFT) |
|
|
(PLLS3C2410_PDIV_MASK << PLLS3C2410_PDIV_SHIFT) |
|
|
(PLLS3C2410_SDIV_MASK << PLLS3C2410_SDIV_SHIFT));
|
|
tmp |= (rate->mdiv << PLLS3C2410_MDIV_SHIFT) |
|
|
(rate->pdiv << PLLS3C2410_PDIV_SHIFT) |
|
|
(rate->sdiv << PLLS3C2410_SDIV_SHIFT);
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
|
|
/* Time to settle according to the manual */
|
|
udelay(300);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int samsung_s3c2410_pll_enable(struct clk_hw *hw, int bit, bool enable)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 pll_en = readl_relaxed(pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
|
|
u32 pll_en_orig = pll_en;
|
|
|
|
if (enable)
|
|
pll_en &= ~BIT(bit);
|
|
else
|
|
pll_en |= BIT(bit);
|
|
|
|
writel_relaxed(pll_en, pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
|
|
|
|
/* if we started the UPLL, then allow to settle */
|
|
if (enable && (pll_en_orig & BIT(bit)))
|
|
udelay(300);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int samsung_s3c2410_mpll_enable(struct clk_hw *hw)
|
|
{
|
|
return samsung_s3c2410_pll_enable(hw, 5, true);
|
|
}
|
|
|
|
static void samsung_s3c2410_mpll_disable(struct clk_hw *hw)
|
|
{
|
|
samsung_s3c2410_pll_enable(hw, 5, false);
|
|
}
|
|
|
|
static int samsung_s3c2410_upll_enable(struct clk_hw *hw)
|
|
{
|
|
return samsung_s3c2410_pll_enable(hw, 7, true);
|
|
}
|
|
|
|
static void samsung_s3c2410_upll_disable(struct clk_hw *hw)
|
|
{
|
|
samsung_s3c2410_pll_enable(hw, 7, false);
|
|
}
|
|
|
|
static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = {
|
|
.recalc_rate = samsung_s3c2410_pll_recalc_rate,
|
|
.enable = samsung_s3c2410_mpll_enable,
|
|
.disable = samsung_s3c2410_mpll_disable,
|
|
};
|
|
|
|
static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = {
|
|
.recalc_rate = samsung_s3c2410_pll_recalc_rate,
|
|
.enable = samsung_s3c2410_upll_enable,
|
|
.disable = samsung_s3c2410_upll_disable,
|
|
};
|
|
|
|
static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = {
|
|
.recalc_rate = samsung_s3c2440_mpll_recalc_rate,
|
|
.enable = samsung_s3c2410_mpll_enable,
|
|
.disable = samsung_s3c2410_mpll_disable,
|
|
};
|
|
|
|
static const struct clk_ops samsung_s3c2410_mpll_clk_ops = {
|
|
.recalc_rate = samsung_s3c2410_pll_recalc_rate,
|
|
.enable = samsung_s3c2410_mpll_enable,
|
|
.disable = samsung_s3c2410_mpll_disable,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_s3c2410_pll_set_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_s3c2410_upll_clk_ops = {
|
|
.recalc_rate = samsung_s3c2410_pll_recalc_rate,
|
|
.enable = samsung_s3c2410_upll_enable,
|
|
.disable = samsung_s3c2410_upll_disable,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_s3c2410_pll_set_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_s3c2440_mpll_clk_ops = {
|
|
.recalc_rate = samsung_s3c2440_mpll_recalc_rate,
|
|
.enable = samsung_s3c2410_mpll_enable,
|
|
.disable = samsung_s3c2410_mpll_disable,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_s3c2410_pll_set_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL2550x Clock Type
|
|
*/
|
|
|
|
#define PLL2550X_R_MASK (0x1)
|
|
#define PLL2550X_P_MASK (0x3F)
|
|
#define PLL2550X_M_MASK (0x3FF)
|
|
#define PLL2550X_S_MASK (0x7)
|
|
#define PLL2550X_R_SHIFT (20)
|
|
#define PLL2550X_P_SHIFT (14)
|
|
#define PLL2550X_M_SHIFT (4)
|
|
#define PLL2550X_S_SHIFT (0)
|
|
|
|
static unsigned long samsung_pll2550x_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 r, p, m, s, pll_stat;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_stat = readl_relaxed(pll->con_reg);
|
|
r = (pll_stat >> PLL2550X_R_SHIFT) & PLL2550X_R_MASK;
|
|
if (!r)
|
|
return 0;
|
|
p = (pll_stat >> PLL2550X_P_SHIFT) & PLL2550X_P_MASK;
|
|
m = (pll_stat >> PLL2550X_M_SHIFT) & PLL2550X_M_MASK;
|
|
s = (pll_stat >> PLL2550X_S_SHIFT) & PLL2550X_S_MASK;
|
|
|
|
fvco *= m;
|
|
do_div(fvco, (p << s));
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll2550x_clk_ops = {
|
|
.recalc_rate = samsung_pll2550x_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL2550xx Clock Type
|
|
*/
|
|
|
|
/* Maximum lock time can be 270 * PDIV cycles */
|
|
#define PLL2550XX_LOCK_FACTOR 270
|
|
|
|
#define PLL2550XX_M_MASK 0x3FF
|
|
#define PLL2550XX_P_MASK 0x3F
|
|
#define PLL2550XX_S_MASK 0x7
|
|
#define PLL2550XX_LOCK_STAT_MASK 0x1
|
|
#define PLL2550XX_M_SHIFT 9
|
|
#define PLL2550XX_P_SHIFT 3
|
|
#define PLL2550XX_S_SHIFT 0
|
|
#define PLL2550XX_LOCK_STAT_SHIFT 21
|
|
|
|
static unsigned long samsung_pll2550xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
|
|
pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
|
|
sdiv = (pll_con >> PLL2550XX_S_SHIFT) & PLL2550XX_S_MASK;
|
|
|
|
fvco *= mdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static inline bool samsung_pll2550xx_mp_change(u32 mdiv, u32 pdiv, u32 pll_con)
|
|
{
|
|
u32 old_mdiv, old_pdiv;
|
|
|
|
old_mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
|
|
old_pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
|
|
|
|
return mdiv != old_mdiv || pdiv != old_pdiv;
|
|
}
|
|
|
|
static int samsung_pll2550xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate;
|
|
u32 tmp;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
|
|
if (!(samsung_pll2550xx_mp_change(rate->mdiv, rate->pdiv, tmp))) {
|
|
/* If only s change, change just s value only*/
|
|
tmp &= ~(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT);
|
|
tmp |= rate->sdiv << PLL2550XX_S_SHIFT;
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set PLL lock time. */
|
|
writel_relaxed(rate->pdiv * PLL2550XX_LOCK_FACTOR, pll->lock_reg);
|
|
|
|
/* Change PLL PMS values */
|
|
tmp &= ~((PLL2550XX_M_MASK << PLL2550XX_M_SHIFT) |
|
|
(PLL2550XX_P_MASK << PLL2550XX_P_SHIFT) |
|
|
(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT));
|
|
tmp |= (rate->mdiv << PLL2550XX_M_SHIFT) |
|
|
(rate->pdiv << PLL2550XX_P_SHIFT) |
|
|
(rate->sdiv << PLL2550XX_S_SHIFT);
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
|
|
/* wait_lock_time */
|
|
do {
|
|
cpu_relax();
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
} while (!(tmp & (PLL2550XX_LOCK_STAT_MASK
|
|
<< PLL2550XX_LOCK_STAT_SHIFT)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll2550xx_clk_ops = {
|
|
.recalc_rate = samsung_pll2550xx_recalc_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_pll2550xx_set_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll2550xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll2550xx_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL2650x Clock Type
|
|
*/
|
|
|
|
/* Maximum lock time can be 3000 * PDIV cycles */
|
|
#define PLL2650X_LOCK_FACTOR 3000
|
|
|
|
#define PLL2650X_M_MASK 0x1ff
|
|
#define PLL2650X_P_MASK 0x3f
|
|
#define PLL2650X_S_MASK 0x7
|
|
#define PLL2650X_K_MASK 0xffff
|
|
#define PLL2650X_LOCK_STAT_MASK 0x1
|
|
#define PLL2650X_M_SHIFT 16
|
|
#define PLL2650X_P_SHIFT 8
|
|
#define PLL2650X_S_SHIFT 0
|
|
#define PLL2650X_K_SHIFT 0
|
|
#define PLL2650X_LOCK_STAT_SHIFT 29
|
|
#define PLL2650X_PLL_ENABLE_SHIFT 31
|
|
|
|
static unsigned long samsung_pll2650x_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u64 fout = parent_rate;
|
|
u32 mdiv, pdiv, sdiv, pll_con0, pll_con1;
|
|
s16 kdiv;
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con0 >> PLL2650X_M_SHIFT) & PLL2650X_M_MASK;
|
|
pdiv = (pll_con0 >> PLL2650X_P_SHIFT) & PLL2650X_P_MASK;
|
|
sdiv = (pll_con0 >> PLL2650X_S_SHIFT) & PLL2650X_S_MASK;
|
|
|
|
pll_con1 = readl_relaxed(pll->con_reg + 4);
|
|
kdiv = (s16)((pll_con1 >> PLL2650X_K_SHIFT) & PLL2650X_K_MASK);
|
|
|
|
fout *= (mdiv << 16) + kdiv;
|
|
do_div(fout, (pdiv << sdiv));
|
|
fout >>= 16;
|
|
|
|
return (unsigned long)fout;
|
|
}
|
|
|
|
static int samsung_pll2650x_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate;
|
|
u32 con0, con1;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
con0 = readl_relaxed(pll->con_reg);
|
|
con1 = readl_relaxed(pll->con_reg + 4);
|
|
|
|
/* Set PLL lock time. */
|
|
writel_relaxed(rate->pdiv * PLL2650X_LOCK_FACTOR, pll->lock_reg);
|
|
|
|
/* Change PLL PMS values */
|
|
con0 &= ~((PLL2650X_M_MASK << PLL2650X_M_SHIFT) |
|
|
(PLL2650X_P_MASK << PLL2650X_P_SHIFT) |
|
|
(PLL2650X_S_MASK << PLL2650X_S_SHIFT));
|
|
con0 |= (rate->mdiv << PLL2650X_M_SHIFT) |
|
|
(rate->pdiv << PLL2650X_P_SHIFT) |
|
|
(rate->sdiv << PLL2650X_S_SHIFT);
|
|
con0 |= (1 << PLL2650X_PLL_ENABLE_SHIFT);
|
|
writel_relaxed(con0, pll->con_reg);
|
|
|
|
con1 &= ~(PLL2650X_K_MASK << PLL2650X_K_SHIFT);
|
|
con1 |= ((rate->kdiv & PLL2650X_K_MASK) << PLL2650X_K_SHIFT);
|
|
writel_relaxed(con1, pll->con_reg + 4);
|
|
|
|
do {
|
|
cpu_relax();
|
|
con0 = readl_relaxed(pll->con_reg);
|
|
} while (!(con0 & (PLL2650X_LOCK_STAT_MASK
|
|
<< PLL2650X_LOCK_STAT_SHIFT)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll2650x_clk_ops = {
|
|
.recalc_rate = samsung_pll2650x_recalc_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_pll2650x_set_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll2650x_clk_min_ops = {
|
|
.recalc_rate = samsung_pll2650x_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL2650XX Clock Type
|
|
*/
|
|
|
|
/* Maximum lock time can be 3000 * PDIV cycles */
|
|
#define PLL2650XX_LOCK_FACTOR 3000
|
|
|
|
#define PLL2650XX_MDIV_SHIFT 9
|
|
#define PLL2650XX_PDIV_SHIFT 3
|
|
#define PLL2650XX_SDIV_SHIFT 0
|
|
#define PLL2650XX_KDIV_SHIFT 0
|
|
#define PLL2650XX_MDIV_MASK 0x1ff
|
|
#define PLL2650XX_PDIV_MASK 0x3f
|
|
#define PLL2650XX_SDIV_MASK 0x7
|
|
#define PLL2650XX_KDIV_MASK 0xffff
|
|
#define PLL2650XX_PLL_ENABLE_SHIFT 23
|
|
#define PLL2650XX_PLL_LOCKTIME_SHIFT 21
|
|
#define PLL2650XX_PLL_FOUTMASK_SHIFT 31
|
|
|
|
static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con0, pll_con2;
|
|
s16 kdiv;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con2 = readl_relaxed(pll->con_reg + 8);
|
|
mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK;
|
|
pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK;
|
|
sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK;
|
|
kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK);
|
|
|
|
fvco *= (mdiv << 16) + kdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
fvco >>= 16;
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 tmp, pll_con0, pll_con2;
|
|
const struct samsung_pll_rate_table *rate;
|
|
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con2 = readl_relaxed(pll->con_reg + 8);
|
|
|
|
/* Change PLL PMS values */
|
|
pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT |
|
|
PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT |
|
|
PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT);
|
|
pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT;
|
|
pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT;
|
|
pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT;
|
|
pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT;
|
|
pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT;
|
|
|
|
pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT);
|
|
pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK)
|
|
<< PLL2650XX_KDIV_SHIFT;
|
|
|
|
/* Set PLL lock time. */
|
|
writel_relaxed(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg);
|
|
|
|
writel_relaxed(pll_con0, pll->con_reg);
|
|
writel_relaxed(pll_con2, pll->con_reg + 8);
|
|
|
|
do {
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
} while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll2650xx_clk_ops = {
|
|
.recalc_rate = samsung_pll2650xx_recalc_rate,
|
|
.set_rate = samsung_pll2650xx_set_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll2650xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll2650xx_recalc_rate,
|
|
};
|
|
|
|
static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
|
|
const struct samsung_pll_clock *pll_clk,
|
|
void __iomem *base)
|
|
{
|
|
struct samsung_clk_pll *pll;
|
|
struct clk_init_data init = {};
|
|
int ret, len;
|
|
|
|
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
|
|
if (!pll) {
|
|
pr_err("%s: could not allocate pll clk %s\n",
|
|
__func__, pll_clk->name);
|
|
return;
|
|
}
|
|
|
|
init.name = pll_clk->name;
|
|
init.flags = pll_clk->flags;
|
|
init.parent_names = &pll_clk->parent_name;
|
|
init.num_parents = 1;
|
|
|
|
if (pll_clk->rate_table) {
|
|
/* find count of rates in rate_table */
|
|
for (len = 0; pll_clk->rate_table[len].rate != 0; )
|
|
len++;
|
|
|
|
pll->rate_count = len;
|
|
pll->rate_table = kmemdup(pll_clk->rate_table,
|
|
pll->rate_count *
|
|
sizeof(struct samsung_pll_rate_table),
|
|
GFP_KERNEL);
|
|
WARN(!pll->rate_table,
|
|
"%s: could not allocate rate table for %s\n",
|
|
__func__, pll_clk->name);
|
|
}
|
|
|
|
switch (pll_clk->type) {
|
|
case pll_2126:
|
|
init.ops = &samsung_pll2126_clk_ops;
|
|
break;
|
|
case pll_3000:
|
|
init.ops = &samsung_pll3000_clk_ops;
|
|
break;
|
|
/* clk_ops for 35xx and 2550 are similar */
|
|
case pll_35xx:
|
|
case pll_2550:
|
|
case pll_1450x:
|
|
case pll_1451x:
|
|
case pll_1452x:
|
|
pll->enable_offs = PLL35XX_ENABLE_SHIFT;
|
|
pll->lock_offs = PLL35XX_LOCK_STAT_SHIFT;
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll35xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll35xx_clk_ops;
|
|
break;
|
|
case pll_4500:
|
|
init.ops = &samsung_pll45xx_clk_min_ops;
|
|
break;
|
|
case pll_4502:
|
|
case pll_4508:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll45xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll45xx_clk_ops;
|
|
break;
|
|
/* clk_ops for 36xx and 2650 are similar */
|
|
case pll_36xx:
|
|
case pll_2650:
|
|
pll->enable_offs = PLL36XX_ENABLE_SHIFT;
|
|
pll->lock_offs = PLL36XX_LOCK_STAT_SHIFT;
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll36xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll36xx_clk_ops;
|
|
break;
|
|
case pll_6552:
|
|
case pll_6552_s3c2416:
|
|
init.ops = &samsung_pll6552_clk_ops;
|
|
break;
|
|
case pll_6553:
|
|
init.ops = &samsung_pll6553_clk_ops;
|
|
break;
|
|
case pll_4600:
|
|
case pll_4650:
|
|
case pll_4650c:
|
|
case pll_1460x:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll46xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll46xx_clk_ops;
|
|
break;
|
|
case pll_s3c2410_mpll:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_s3c2410_mpll_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_s3c2410_mpll_clk_ops;
|
|
break;
|
|
case pll_s3c2410_upll:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_s3c2410_upll_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_s3c2410_upll_clk_ops;
|
|
break;
|
|
case pll_s3c2440_mpll:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_s3c2440_mpll_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_s3c2440_mpll_clk_ops;
|
|
break;
|
|
case pll_2550x:
|
|
init.ops = &samsung_pll2550x_clk_ops;
|
|
break;
|
|
case pll_2550xx:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll2550xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll2550xx_clk_ops;
|
|
break;
|
|
case pll_2650x:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll2650x_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll2650x_clk_ops;
|
|
break;
|
|
case pll_2650xx:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll2650xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll2650xx_clk_ops;
|
|
break;
|
|
default:
|
|
pr_warn("%s: Unknown pll type for pll clk %s\n",
|
|
__func__, pll_clk->name);
|
|
}
|
|
|
|
pll->hw.init = &init;
|
|
pll->type = pll_clk->type;
|
|
pll->lock_reg = base + pll_clk->lock_offset;
|
|
pll->con_reg = base + pll_clk->con_offset;
|
|
|
|
ret = clk_hw_register(ctx->dev, &pll->hw);
|
|
if (ret) {
|
|
pr_err("%s: failed to register pll clock %s : %d\n",
|
|
__func__, pll_clk->name, ret);
|
|
kfree(pll->rate_table);
|
|
kfree(pll);
|
|
return;
|
|
}
|
|
|
|
samsung_clk_add_lookup(ctx, &pll->hw, pll_clk->id);
|
|
}
|
|
|
|
void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
|
|
const struct samsung_pll_clock *pll_list,
|
|
unsigned int nr_pll, void __iomem *base)
|
|
{
|
|
int cnt;
|
|
|
|
for (cnt = 0; cnt < nr_pll; cnt++)
|
|
_samsung_clk_register_pll(ctx, &pll_list[cnt], base);
|
|
}
|