cdaf89ab8f
[ Upstream commit 26cd8657c7e745686a4c54a5cccf721ede208a25 ] Ports are described by child 'port' nodes contained in the device node. 'ports' is optional and is used to group all 'port' nodes which is not the case here. This patch fixes the following warnings: arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts:25.9-29.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port' arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts:46.9-50.5: Warningi (graph_port): /edp-panel/ports: graph port node name should be 'port' arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts:94.9-98.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port' Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
202 lines
3.9 KiB
Plaintext
202 lines
3.9 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "rk3399-sapphire.dtsi"
|
|
|
|
/ {
|
|
model = "Excavator-RK3399 Board";
|
|
compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399";
|
|
|
|
adc-keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 1>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
poll-interval = <100>;
|
|
|
|
button-up {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
press-threshold-microvolt = <100000>;
|
|
};
|
|
|
|
button-down {
|
|
label = "Volume Down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
press-threshold-microvolt = <300000>;
|
|
};
|
|
|
|
back {
|
|
label = "Back";
|
|
linux,code = <KEY_BACK>;
|
|
press-threshold-microvolt = <985000>;
|
|
};
|
|
|
|
menu {
|
|
label = "Menu";
|
|
linux,code = <KEY_MENU>;
|
|
press-threshold-microvolt = <1314000>;
|
|
};
|
|
};
|
|
|
|
edp_panel: edp-panel {
|
|
compatible ="lg,lp079qx1-sp0v", "simple-panel";
|
|
backlight = <&backlight>;
|
|
enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_panel_reset>;
|
|
power-supply = <&vcc3v3_s0>;
|
|
|
|
port {
|
|
panel_in_edp: endpoint {
|
|
remote-endpoint = <&edp_out_panel>;
|
|
};
|
|
};
|
|
};
|
|
|
|
rt5651-sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "realtek,rt5651-codec";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,widgets =
|
|
"Microphone", "Mic Jack",
|
|
"Headphone", "Headphone Jack";
|
|
simple-audio-card,routing =
|
|
"Mic Jack", "MICBIAS1",
|
|
"IN1P", "Mic Jack",
|
|
"Headphone Jack", "HPOL",
|
|
"Headphone Jack", "HPOR";
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s0>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&rt5651>;
|
|
};
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rk808 1>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&backlight {
|
|
enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&edp {
|
|
status = "okay";
|
|
|
|
ports {
|
|
edp_out: port@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
edp_out_panel: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&panel_in_edp>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
i2c-scl-rising-time-ns = <300>;
|
|
i2c-scl-falling-time-ns = <15>;
|
|
status = "okay";
|
|
|
|
rt5651: rt5651@1a {
|
|
compatible = "rockchip,rt5651";
|
|
reg = <0x1a>;
|
|
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
|
clock-names = "mclk";
|
|
hp-det-gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
|
|
spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
i2c-scl-rising-time-ns = <600>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
|
|
accelerometer@68 {
|
|
compatible = "invensense,mpu6500";
|
|
reg = <0x68>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
};
|
|
|
|
&i2s0 {
|
|
rockchip,playback-channels = <8>;
|
|
rockchip,capture-channels = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
num-lanes = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_clkreqn_cpm>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
lcd-panel {
|
|
lcd_panel_reset: lcd-panel-reset {
|
|
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdio0 {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
clock-frequency = <50000000>;
|
|
disable-wp;
|
|
keep-power-in-suspend;
|
|
max-frequency = <50000000>;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&spdif {
|
|
i2c-scl-rising-time-ns = <450>;
|
|
i2c-scl-falling-time-ns = <15>;
|
|
status = "okay";
|
|
};
|