Changes in 4.19.276
HID: asus: Remove check for same LED brightness on set
HID: asus: use spinlock to protect concurrent accesses
HID: asus: use spinlock to safely schedule workers
ARM: OMAP2+: Fix memory leak in realtime_counter_init()
ARM: zynq: Fix refcount leak in zynq_early_slcr_init
arm64: dts: meson-gx: Fix Ethernet MAC address unit name
arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address
ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
ARM: dts: exynos: correct wr-active property in Exynos3250 Rinato
ARM: imx: Call ida_simple_remove() for ida_simple_get
arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name
arm64: dts: meson-axg: enable SCPI
arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node name
arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible
arm64: dts: amlogic: meson-gx: add missing unit address to rng node name
arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node name
arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node
blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
wifi: rsi: Fix memory leak in rsi_coex_attach()
wifi: libertas: fix memory leak in lbs_init_adapter()
wifi: rtl8xxxu: don't call dev_kfree_skb() under spin_lock_irqsave()
rtlwifi: fix -Wpointer-sign warning
wifi: rtlwifi: Fix global-out-of-bounds bug in _rtl8812ae_phy_set_txpower_limit()
ipw2x00: switch from 'pci_' to 'dma_' API
wifi: ipw2x00: don't call dev_kfree_skb() under spin_lock_irqsave()
wifi: ipw2200: fix memory leak in ipw_wdev_init()
wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit()
wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid()
wifi: libertas_tf: don't call kfree_skb() under spin_lock_irqsave()
wifi: libertas: if_usb: don't call kfree_skb() under spin_lock_irqsave()
wifi: libertas: main: don't call kfree_skb() under spin_lock_irqsave()
wifi: libertas: cmdresp: don't call kfree_skb() under spin_lock_irqsave()
wifi: wl3501_cs: don't call kfree_skb() under spin_lock_irqsave()
ACPICA: Drop port I/O validation for some regions
genirq: Fix the return type of kstat_cpu_irqs_sum()
lib/mpi: Fix buffer overrun when SG is too long
ACPICA: nsrepair: handle cases without a return value correctly
wifi: orinoco: check return value of hermes_write_wordrec()
wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function
ath9k: hif_usb: simplify if-if to if-else
ath9k: htc: clean up statistics macros
wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails
wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()
ACPI: battery: Fix missing NUL-termination with large strings
crypto: seqiv - Handle EBUSY correctly
powercap: fix possible name leak in powercap_register_zone()
net/mlx5: Enhance debug print in page allocation failure
irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains
irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe
Bluetooth: L2CAP: Fix potential user-after-free
libbpf: Fix alen calculation in libbpf_nla_dump_errormsg()
rds: rds_rm_zerocopy_callback() correct order for list_add_tail()
crypto: rsa-pkcs1pad - Use akcipher_request_complete
m68k: /proc/hardware should depend on PROC_FS
RISC-V: time: initialize hrtimer based broadcast clock event device
wifi: iwl3945: Add missing check for create_singlethread_workqueue
wifi: iwl4965: Add missing check for create_singlethread_workqueue()
wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize()
crypto: crypto4xx - Call dma_unmap_page when done
wifi: mac80211: make rate u32 in sta_set_rate_info_rx()
can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error
irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
selftest: fib_tests: Always cleanup before exit
drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC
drm/bridge: megachips: Fix error handling in i2c_register_driver()
drm: Clarify definition of the DRM_BUS_FLAG_(PIXDATA|SYNC)_* macros
drm/vc4: dpi: Add option for inverting pixel clock and output enable
drm/vc4: dpi: Fix format mapping for RGB565
gpu: ipu-v3: common: Add of_node_put() for reference returned by of_graph_get_port_by_id()
drm/msm/hdmi: Add missing check for alloc_ordered_workqueue
pinctrl: pinctrl-rockchip: Fix a bunch of kerneldoc misdemeanours
pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups
ALSA: hda/ca0132: minor fix for allocation size
drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness
drm/msm: use strscpy instead of strncpy
drm/msm/dpu: Add check for pstates
gpu: host1x: Don't skip assigning syncpoints to channels
drm/mediatek: Drop unbalanced obj unref
drm/mediatek: Clean dangling pointer on bind error path
ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress()
gpio: vf610: connect GPIO label to dev name
hwmon: (ltc2945) Handle error case in ltc2945_value_store
scsi: aic94xx: Add missing check for dma_map_single()
spi: bcm63xx-hsspi: fix pm_runtime
spi: bcm63xx-hsspi: Fix multi-bit mode setting
hwmon: (mlxreg-fan) Return zero speed for broken fan
dm: remove flush_scheduled_work() during local_exit()
nfsd: fix race to check ls_layouts
cifs: Fix lost destroy smbd connection when MR allocate failed
cifs: Fix warning and UAF when destroy the MR list
gfs2: jdata writepage fix
perf llvm: Fix inadvertent file creation
perf tools: Fix auto-complete on aarch64
sparc: allow PM configs for sparc32 COMPILE_TEST
selftests/ftrace: Fix bash specific "==" operator
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
mtd: rawnand: sunxi: Fix the size of the last OOB region
Input: ads7846 - don't report pressure for ads7845
Input: ads7846 - don't check penirq immediately for 7845
powerpc/powernv/ioda: Skip unallocated resources when mapping to PE
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
powerpc/pseries/lparcfg: add missing RTAS retry status handling
powerpc/rtas: make all exports GPL
powerpc/rtas: ensure 4KB alignment for rtas_data_buf
MIPS: vpe-mt: drop physical_memsize
media: platform: ti: Add missing check for devm_regulator_get
powerpc: Remove linker flag from KBUILD_AFLAGS
media: i2c: ov772x: Fix memleak in ov772x_probe()
media: rc: Fix use-after-free bugs caused by ene_tx_irqsim()
media: i2c: ov7670: 0 instead of -EINVAL was returned
media: usb: siano: Fix use after free bugs caused by do_submit_urb
rpmsg: glink: Avoid infinite loop on intent for missing channel
udf: Define EFSCORRUPTED error code
ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds()
rcu: Suppress smp_processor_id() complaint in synchronize_rcu_expedited_wait()
thermal: intel: Fix unsigned comparison with less than zero
timers: Prevent union confusion from unexpected restart_syscall()
x86/bugs: Reset speculation control settings on init
wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds
inet: fix fast path in __inet_hash_connect()
ACPI: Don't build ACPICA with '-Os'
net: bcmgenet: Add a check for oversized packets
m68k: Check syscall_trace_enter() return code
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
net/mlx5: fw_tracer: Fix debug print
drm/amd/display: Fix potential null-deref in dm_resume
drm/radeon: free iio for atombios when driver shutdown
drm/msm/dsi: Add missing check for alloc_ordered_workqueue
docs/scripts/gdb: add necessary make scripts_gdb step
ASoC: kirkwood: Iterate over array indexes instead of using pointer math
regulator: max77802: Bounds check regulator id against opmode
regulator: s5m8767: Bounds check id indexing into arrays
pinctrl: at91: use devm_kasprintf() to avoid potential leaks
dm thin: add cond_resched() to various workqueue loops
dm cache: add cond_resched() to various workqueue loops
wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu
firmware: coreboot: framebuffer: Ignore reserved pixel color bits
rtc: pm8xxx: fix set-alarm race
s390: discard .interp section
s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler
s390/kprobes: fix current_kprobe never cleared after kprobes reenter
ARM: dts: exynos: correct HDMI phy compatible in Exynos4
hfs: fix missing hfs_bnode_get() in __hfs_bnode_create
fs: hfsplus: fix UAF issue in hfsplus_put_super
f2fs: fix information leak in f2fs_move_inline_dirents()
ocfs2: fix defrag path triggering jbd2 ASSERT
ocfs2: fix non-auto defrag path not working issue
udf: Truncate added extents on failed expansion
udf: Do not bother merging very long extents
udf: Do not update file length for failed writes to inline files
udf: Fix file corruption when appending just after end of preallocated extent
x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows)
x86/crash: Disable virt in core NMI crash handler to avoid double shootdown
x86/reboot: Disable virtualization in an emergency if SVM is supported
x86/reboot: Disable SVM, not just VMX, when stopping CPUs
x86/kprobes: Fix __recover_optprobed_insn check optimizing logic
x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range
x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter
x86/microcode/AMD: Add a @cpu parameter to the reloading functions
x86/microcode/AMD: Fix mixed steppings support
x86/speculation: Allow enabling STIBP with legacy IBRS
Documentation/hw-vuln: Document the interaction between IBRS and STIBP
ima: Align ima_file_mmap() parameters with mmap_file LSM hook
irqdomain: Fix association race
irqdomain: Fix disassociation race
irqdomain: Drop bogus fwspec-mapping error handling
ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls()
ext4: optimize ea_inode block expansion
ext4: refuse to create ea block when umounted
wifi: rtl8xxxu: Use a longer retry limit of 48
wifi: cfg80211: Fix use after free for wext
dm flakey: fix logic when corrupting a bio
dm flakey: don't corrupt the zero page
ARM: dts: exynos: correct TMU phandle in Exynos4
ARM: dts: exynos: correct TMU phandle in Odroid XU
rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
alpha: fix FEN fault handling
mips: fix syscall_get_nr
media: ipu3-cio2: Fix PM runtime usage_count in driver unbind
ktest.pl: Give back console on Ctrt^C on monitor
ktest.pl: Fix missing "end_monitor" when machine check fails
ktest.pl: Add RUN_TIMEOUT option with default unlimited
scsi: qla2xxx: Fix link failure in NPIV environment
scsi: qla2xxx: Fix erroneous link down
scsi: ses: Don't attach if enclosure has no components
scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process()
scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses
scsi: ses: Fix possible desc_ptr out-of-bounds accesses
scsi: ses: Fix slab-out-of-bounds in ses_intf_remove()
PCI: Avoid FLR for AMD FCH AHCI adapters
drm/radeon: Fix eDP for single-display iMac11,2
wifi: ath9k: use proper statements in conditionals
kbuild: Port silent mode detection to future gnu make.
net/sched: Retire tcindex classifier
fs/jfs: fix shift exponent db_agl2size negative
pwm: stm32-lp: fix the check on arr and cmp registers update
um: vector: Fix memory leak in vector_config
ubi: ensure that VID header offset + VID header size <= alloc, size
ubifs: Rectify space budget for ubifs_symlink() if symlink is encrypted
ubifs: Rectify space budget for ubifs_xrename()
ubifs: Fix wrong dirty space budget for dirty inode
ubifs: do_rename: Fix wrong space budget when target inode's nlink > 1
ubifs: Reserve one leb for each journal head while doing budget
ubi: Fix use-after-free when volume resizing failed
ubi: Fix unreferenced object reported by kmemleak in ubi_resize_volume()
ubi: Fix possible null-ptr-deref in ubi_free_volume()
ubifs: Re-statistic cleaned znode count if commit failed
ubifs: dirty_cow_znode: Fix memleak in error handling path
ubifs: ubifs_writepage: Mark page dirty after writing inode failed
ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show()
ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
x86: um: vdso: Add '%rcx' and '%r11' to the syscall clobber list
watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path
watchdog: Fix kmemleak in watchdog_cdev_register
watchdog: pcwd_usb: Fix attempting to access uninitialized memory
netfilter: ctnetlink: fix possible refcount leak in ctnetlink_create_conntrack()
net: fix __dev_kfree_skb_any() vs drop monitor
9p/xen: fix version parsing
9p/xen: fix connection sequence
9p/rdma: unmap receive dma buffer in rdma_request()/post_recv()
nfc: fix memory leak of se_io context in nfc_genl_se_io
ARM: dts: spear320-hmi: correct STMPE GPIO compatible
tcp: tcp_check_req() can be called from process context
vc_screen: modify vcs_size() handling in vcs_read()
scsi: ipr: Work around fortify-string warning
thermal: intel: quark_dts: fix error pointer dereference
tracing: Add NULL checks for buffer in ring_buffer_free_read_page()
firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
media: uvcvideo: Handle cameras with invalid descriptors
media: uvcvideo: Handle errors from calls to usb_string
media: uvcvideo: Silence memcpy() run-time false positive warnings
tty: fix out-of-bounds access in tty_driver_lookup_tty()
tty: serial: fsl_lpuart: disable the CTS when send break signal
mei: bus-fixup:upon error print return values of send and receive
tools/iio/iio_utils:fix memory leak
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
usb: host: xhci: mvebu: Iterate over array indexes instead of using pointer math
USB: ene_usb6250: Allocate enough memory for full object
usb: uvc: Enumerate valid values for color matching
phy: rockchip-typec: Fix unsigned comparison with less than zero
Bluetooth: hci_sock: purge socket queues in the destruct() callback
s390/maccess: add no DAT mode to kernel_write
s390/setup: init jump labels before command line parsing
tcp: Fix listen() regression in 4.19.270
media: uvcvideo: Provide sync and async uvc_ctrl_status_event
media: uvcvideo: Fix race condition with usb_kill_urb
f2fs: fix cgroup writeback accounting with fs-layer encryption
thermal: intel: powerclamp: Fix cur_state for multi package system
Linux 4.19.276
Change-Id: Iaca469bb6e616eafeac4e834dad816acc2fe0f34
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit 330584716d which is
commit 25de4ce5ed02994aea8bc111d133308f6fd62566 upstream.
It breaks the build and is not needed in this android branch.
Bug: 161946584
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I409b1d804cc06c189827a82b48e8a95afd9ced01
commit 25de4ce5ed02994aea8bc111d133308f6fd62566 upstream.
There is a timer wrap issue on dra7 for the ARM architected timer.
In a typical clock configuration the timer fails to wrap after 388 days.
To work around the issue, we need to use timer-ti-dm percpu timers instead.
Let's configure dmtimer3 and 4 as percpu timers by default, and warn about
the issue if the dtb is not configured properly.
For more information, please see the errata for "AM572x Sitara Processors
Silicon Revisions 1.1, 2.0":
https://www.ti.com/lit/er/sprz429m/sprz429m.pdf
The concept is based on earlier reference patches done by Tero Kristo and
Keerthy.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
[tony@atomide.com: backported to 4.19.y]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3efe7a878a11c13b5297057bfc1e5639ce1241ce upstream.
There is a timer wrap issue on dra7 for the ARM architected timer.
In a typical clock configuration the timer fails to wrap after 388 days.
To work around the issue, we need to use timer-ti-dm timers instead.
Let's prepare for adding support for percpu timers by adding a common
dmtimer_clkevt_init_common() and call it from __omap_sync32k_timer_init().
This patch makes no intentional functional changes.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
[tony@atomide.com: backported to 4.19.y]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52762fbd1c4778ac9b173624ca0faacd22ef4724 upstream.
We can move the TI dmtimer clockevent and clocksource to live under
drivers/clocksource if we rely only on the clock framework, and handle
the module configuration directly in the clocksource driver based on the
device tree data.
This removes the early dependency with system timers to the interconnect
related code, and we can probe pretty much everything else later on at
the module_init level.
Let's first add a new driver for timer-ti-dm-systimer based on existing
arch/arm/mach-omap2/timer.c. Then let's start moving SoCs to probe with
device tree data while still keeping the old timer.c. And eventually we
can just drop the old timer.c.
Let's take the opportunity to switch to use readl/writel as pointed out
by Daniel Lezcano <daniel.lezcano@linaro.org>. This allows further
clean-up of the timer-ti-dm code the a lot of the shared helpers can
just become static to the non-syster related code.
Note the boards can optionally configure different timer source clocks
if needed with assigned-clocks and assigned-clock-parents.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
[tony@atomide.com: backported to 4.19.y]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Late omap soc changes for v4.18 merge window
This series contains two omap1 ams-delta GPIO clean-up patches to get
started with removal of hard-coded GPIO numbers from drivers. And then
the removal of board mach includes from drivers. The second patch mostly
touches the ams-delta audio driver but is included here because of the
removal of the latch gpios and is acked by Mark Brown.
And there are two more am437x related PM patches to save and restore
control module and timer registers for RTC only suspend mode. Looks like
the patch title for the timer changes is a bit misleading, not all the
timer code is yet living under drivers/clocksource. But I had already
pushed out the branch before I noticed this.
* tag 'omap-for-v4.18/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
OMAP: CLK: CLKSRC: Add suspend resume hooks
ARM: AM43XX: Add functions to save/restore am43xx control registers
ASoC: ams_delta: use GPIO lookup table
ARM: OMAP1: ams-delta: add GPIO lookup tables
Signed-off-by: Olof Johansson <olof@lixom.net>
Add the save and restore for clksrc as part of suspend and resume
so that it saves the counter value and restores. This is needed in
modes like rtc+ddr in self-refresh not doing this stalls the time.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
If a system timer is configured with an interrconnect target module in
the dts, the ti,hwmods and module fck are at the interconnect target
level. Then there's a separate fck for the timer child device.
If the child device has a separate functional clock, we need to configure
it directly. For example, timer clk clkctrl clock bit 0 is the module
clock for the interconnect target, and bit 24 being the functional clock
for the timer IP.
For system timers, we already mark them as disabled. Now must also mark
the interconnect target module as disabled to prevent ti-sysc to manage
it instead of the system timer.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Looks like these functions don't do anything in the mainline kernel so
we can just drop it.
Note that we must now also remove ir-rx51 pdata as it relies on the dummy
platform data that does not do anything. And ir-rx51 is calling a pdata
callback that doesn't do anything without checking if it exists first.
For configuring device specific minimal latencies, the interface to use
is pm_qos_add_request(). For an example, see what was done in commit
9834ffd1ec ("ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent
glitches"). I've added some comments to ir-rx51 so people using it can
add pm_qos support and test it.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The header file is currently under plat-omap directory
under arch/omap. Move this out to an accessible place.
No Code changes done to the header file and renamed to timer-ti-dm.h.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When more than one GP timers are used as kernel system timers and the
corresponding nodes in device-tree are marked with the same "disabled"
property, then the "attr" field of the property will be initialized
more than once as the property being added to sys file system via
__of_add_property_sysfs().
In __of_add_property_sysfs(), the "name" field of pp->attr.attr is set
directly to the return value of safe_name(), without taking care of
whether it's already a valid pointer to a memory block. If it is, its
old value will always be overwritten by the new one and the memory block
allocated before will a "ghost", then a kmemleak happened.
That the same "disabled" property being added to different nodes of device
tree would cause that kind of kmemleak overhead, at least once.
To fix it, allocate the property dynamically, and delete static one.
Signed-off-by: Qi Hou <qi.hou@windriver.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull ARM SoC platform updates from Arnd Bergmann:
"SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
- Andres Färber adds initial support for the Actions Semi S500 (aka
'owl') platform, a close relative of the S900 platform he adds for
arm64.
- in mach-omap2, we remove more legacy code
- Rockchips gains support for the RV1108 SoC designed for camera
applications.
- For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)
- Minor updates for other platforms, including davinci, s3c64xx,
prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits)
ARM: owl: smp: Drop bogus holding pen
ARM: owl: Drop custom machine
ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
soc: actions: Add Owl SPS
dt-bindings: power: Add Owl SPS power domains
MAINTAINERS: Update Actions Semi section with SPS
ARM: owl: Implement CPU enable-method for S500
MAINTAINERS: Add Actions Semi Owl section
ARM: Prepare Actions Semi S500
ARM: socfpga: Increase max number of GPIOs
ARM: stm32: Introduce MACH_STM32F469 flag
ARM: prima2: remove redundant select CPU_V7
ARM: davinci: fix const warnings
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON
ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
ARM: OMAP4: hwmod data: add des
ARM: OMAP4: hwmod data: add aes2
ARM: OMAP4: hwmod data: add aes1
ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
...
The mux clock handle shall be provided via "fck" DT handle. This avoids
the need to lookup the main clock via hwmod core, which will not work
with the clkctrl clock support anymore; the main clock is not going to
be a mux.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
OMAP timer code registers two timers - one as clocksource
and one as clockevent. Since AM33XX has only one usable timer
in the WKUP domain one of the timers needs suspend-resume
support to restore the configuration to pre-suspend state.
commit adc78e6b99 ("timekeeping: Add suspend and resume
of clock event devices") introduced .suspend and .resume
callbacks for clock event devices. Leverage these
callbacks to have AM33XX clockevent timer behave properly
across system suspend. Extend the use of the .suspend and
.resume callbacks used by am335x clockevent to am437x as well.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The commit 55ee7017ee ("arm: omap2: board-generic: use
omap4_local_timer_init for AM437x") unintentionally changes the
clocksource devices for AM437x from OMAP GP Timer to SyncTimer32K.
Unfortunately, the SyncTimer32K is starving from frequency deviation
as mentioned in commit 5b5c013591 ("ARM: OMAP2+: AM43x: Use gptimer
as clocksource") and, as reported by Franklin [1], even its monotonic
nature is under question (most probably there is a HW issue, but it's
still under investigation).
Taking into account above facts It's reasonable to rollback to the use
of omap3_gptimer_timer_init().
[1] http://www.spinics.net/lists/linux-omap/msg127425.html
Fixes: 55ee7017ee ("arm: omap2: board-generic: use
omap4_local_timer_init for AM437x")
Reported-by: Cooper Jr., Franklin <fcooper@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There is no point in having an extra type for extra confusion. u64 is
unambiguous.
Conversion was done with the following coccinelle script:
@rem@
@@
-typedef u64 cycle_t;
@fix@
typedef cycle_t;
@@
-cycle_t
+u64
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
With the introduction of hwmod module clocks, the name of the hwmod
main clk may not be available before hwmod setup, as hwmod setup
may lookup the main clock dynamically based on the hwmod name.
Thus, change the order of hwmod setup and main clock handling for
the timer code, to make sure the main clock is going to be
available.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
A few platforms are currently missing clocksource_probe() completely
in their time_init functionality. On OMAP3430 for example, this is
causing cpuidle to be pretty much dead, as the counter32k is not
going to be registered and instead a gptimer is used as a clocksource.
This will tick in periodic mode, preventing any deeper idle states.
While here, also drop one unnecessary check for populated DT before
existing clocksource_probe() call.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull ARM SoC platform updates from Olof Johansson:
"Updates for new platform support:
- New platform: Tango4 from Sigma Designs.
- Broadcom BCM2836 (Raspberry Pi 2 SoC)
- Enable cpufreq on Freescale i.MX7D
- Rockchip: SMP support for rk3036, general support for rk3228
- SMP support on Broadcom Kona and NSP
- Cleanups for OMAP removing legacy IOMMU data
+ a bunch of misc fixes and tweaks for various platforms"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
ARM: tango: Fix UP build issues
ARM: tango: pass ARM arch level for smc.S
ARM: bcm2835: Add Kconfig support for bcm2836
ARM: OMAP2+: Add support for dm814x and dra62x usb
ARM: OMAP2+: Add mmc hwmod entries for dm814x
ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx
ARM: OMAP2+: Fix SoC detection for dra62x j5-eco
ARM: tango4: Initial platform support
ARM: bcm2835: Add a compat string for bcm2836 machine probe
dt-bindings: Add root properties for Raspberry Pi 2
ARM: imx: select SRC for i.MX7
ARM: uniphier: select PINCTRL
ARM: OMAP2+: Remove device creation for omap-pcm-audio
ARM: OMAP1: Remove device creation for omap-pcm-audio
ARM: rockchip: enable support for RK3228 SoCs
ARM: rockchip: use const and __initconst for rk3036 smp_operations
ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER
ARM: BCM: Add SMP support for Broadcom 4708
ARM: BCM: Add SMP support for Broadcom NSP
ARM: BCM: Clean up SMP support for Broadcom Kona
...
System will misbehave in the following case:
- AM43XX only build (UP);
- CONFIG_CPU_IDLE=y
- ARM TWD timer enabled and selected as clockevent device.
In the above case, It's expected that broadcast timer will be used as
backup timer when CPUIdle will put MPU in low power states where ARM
TWD will stop and lose its context. But, the CONFIG_SMP might not be
selected when kernel is built for AM43XX SoC only and, as result,
GENERIC_CLOCKEVENTS_BROADCAST option will not be selected also. This
will break CPUIdle and System will stuck in low power states.
Hence, fix it by selecting GENERIC_CLOCKEVENTS_BROADCAST option for
AM43XX SoCs always and add empty tick_broadcast() function
implementation - no need to send any IPI on UP. After this change
timer1 will be selected as broadcast timer the same way as for SMP,
and CPUIdle will work properly.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Timer 12 on DRA7 SoCs is reserved for secure usage on high-secure (HS)
devices. The timer cannot be used by the kernel on HS devices, but is
available on regular general purpose (GP) devices. This is similar to the
behavior on OMAP3 devices, so extend the logic used in commit ad24bde8f1
("ARM: OMAP3: Dynamically disable secure timer nodes for secure devices")
to remove the secure timer on DRA7xx SoCs at run-time based on the SoC
device type.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull ARM SoC cleanups from Olof Johansson:
"Again we have a sizable (but not huge) cleanup branch with a net delta
of about -3k lines.
Main contents here is:
- A bunch of development/cleanup of a few PXA boards
- Removal of bockw platforms on shmobile, since the platform has now
gone completely multiplatform. Whee!
- move of the 32kHz timer on OMAP to a proper timesource
- Misc cleanup of older OMAP material (incl removal of one board
file)
- Switch over to new common PWM lookup support for several platforms
There's also a handful of other cleanups across the tree, but the
above are the major pieces"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (103 commits)
ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs
ARM: DRA7: hwmod data: Remove spinlock hwmod addrs
ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs
ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data
ARM: Remove __ref on hotplug cpu die path
ARM: Remove open-coded version of IRQCHIP_DECLARE
arm: omap2: board-generic: use omap4_local_timer_init for AM437x
ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data
ARM: OMAP: Remove duplicated operand in OR operation
clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE
ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode
ARM: pxa: raumfeld: make some variables static
ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c
ARM: OMAP2+: Rename cpu_is macros to soc_is
arm: omap2: timer: limit hwmod usage to non-DT boots
arm: omap2+: select 32k clocksource driver
clocksource: add TI 32.768 Hz counter driver
arm: omap2: timer: rename omap_sync32k_timer_init()
arm: omap2: timer: always call clocksource_of_init() when DT
arm: omap2: timer: move realtime_counter_init() around
...
now that we have a working 32k clocksource driver,
we can limit HWMOD usage to non-DT boots and rely
on clocksource_of_init() every time we boot
with DT.
While at that, also make sure that we don't disable
the 32-counter device so it gets probed by its driver.
Signed-off-by: Felipe Balbi <balbi@ti.com>
this function is not only about the 32k sync
timer, it's OMAP's generic init_time implementation.
Let's rename it to make that detail easier to
notice.
Signed-off-by: Felipe Balbi <balbi@ti.com>
If booting with DT, let's make sure to always
call clocksource_of_init() as this will make
it easier to move timer code to drivers/clocksource
in the future.
Signed-off-by: Felipe Balbi <balbi@ti.com>
instead of constantly defining a small wrapper
around __omap_sync32k_timer_init(), let's define
a generic one which can be used by all OMAPs.
Signed-off-by: Felipe Balbi <balbi@ti.com>
__omap_sync32k_timer_init(), now takes the clock
source as a parameter. This means we no longer need
__omap_gptimer_init().
Note that __omap_sync32k_timer_init() will be
renamed in a follow-up patch as it's not longer 32k
source specific.
Signed-off-by: Felipe Balbi <balbi@ti.com>
as it turns out, __omap_gptimer_init() and
__omap_sync32k_timer_init() are essentially
the same thing, but __omap_gptimer_init() wants
to always use gptimer.
Instead of forcing all those devices to pass
a use_gptimer cmdline argument, we add a new
function argument to __omap_sync32k_timer_init()
in preparation to deleting __omap_gptimer_init().
On a follow-up patch, we will remove uses of
__omap_gptimer_init() and replace them with
__omap_sync32k_timer_init() and pass the last
argument as true.
Signed-off-by: Felipe Balbi <balbi@ti.com>
those macros just make it a lot more difficult
to grep around and actually find similarities.
In this patch, we will simply remove them and
replace with actual functions and later commits
will come to further clean this up.
Signed-off-by: Felipe Balbi <balbi@ti.com>
omap4_local_timer_init() can be used by other
platforms as is. At least AM437x wants to use
it. Instead of making omap4-only and providing
a stub for builds without OMAP4, we can just
make sure that function is always available
for all SoCs that need it.
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
When bringing up a new SoC we needlessly prevent booting at timer
init if timer clock_set_parent fails. This can fail if the system
is booting on bootloader configured PLL values until the clock
framework driver for the PLL is implemented.
Let's just WARN instead, this will provide helpful information
for anybody bringing up a new SoC what needs to be fixed.
This allows to boot dm814x that's still missing the PLL driver.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull ARM SoC platform updates from Olof Johansson:
"New or improved SoC support:
- add support for Atmel's SAMA5D2 SoC
- add support for Freescale i.MX6UL
- improved support for TI's DM814x platform
- misc fixes and improvements for RockChip platforms
- Marvell MVEBU suspend/resume support
A few driver changes that ideally would belong in the drivers branch
are also here (acked by appropriate maintainers):
- power key input driver for Freescale platforms (svns)
- RTC driver updates for Freescale platforms (svns/mxc)
- clk fixes for TI DM814/816X
+ a bunch of other changes for various platforms"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
ARM: rockchip: pm: Fix PTR_ERR() argument
ARM: imx: mach-imx6ul: Fix allmodconfig build
clk: ti: fix for definition movement
ARM: uniphier: drop v7_invalidate_l1 call at secondary entry
memory: kill off set_irq_flags usage
rtc: snvs: select option REGMAP_MMIO
ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE
ARM: BCM: Enable ARM erratum 798181 for BRCMSTB
ARM: OMAP2+: Fix power domain operations regression caused by 81xx
ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend
ARM: rockchip: set correct stabilization thresholds in suspend
ARM: rockchip: rename osc_switch_to_32k variable
ARM: imx6ul: add fec MAC refrence clock and phy fixup init
ARM: imx6ul: add fec bits to GPR syscon definition
rtc: mxc: add support of device tree
dt-binding: document the binding for mxc rtc
rtc: mxc: use a second rtc clock
ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback
soc: mediatek: Fix SCPSYS compilation
ARM: at91/soc: add basic support for new sama5d2 SoC
...
ARM: OMAP2+: PRCM and hwmod changes for v4.3
This series adds:
- I/O wakeup support for AM43xx
- register lock and unlock support to the hwmod code (needed for the RTC
IP blocks on some chips)
- several fixes for sparse warnings and an unnecessary null pointer test
- a DRA7xx clockdomain configuration workaround, to deal with some hardware
bugs
Basic build, boot, and PM tests are here:
http://www.pwsan.com/omap/testlogs/hwmod-prcm-for-v4.3/20150723080012/
Since I do not have an AM43xx or DRA7xx device, I can't test on those
platforms.
Migrate omap2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Inspired by a patch from Felipe Balbi <balbi@ti.com>, we can
now get rid of most the code in omap4_local_timer_init.
Omap4 is now device tree only.. And we have not properly supported
omap4 ES1.0 revision for a really long time AFAIK.
Let's just remove all that code to simplify things. This assumes
we have arm,cortex-a9-twd-timer entry in the omap4.dtsi file, which
we do.
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The of_node_put() function tests whether its argument is NULL and then
returns immediately if so. Furthermore, the kerneldoc for
of_node_put() explicitly supports passing in a NULL pointer as its
argument. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[paul@pwsan.com: dropped the omap_device.c and omap_hwmod.c changes for
now, edited the commit message accordingly and to note the documented
"contract"]
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
With recent changes to use determine_rate, the comparison of two
clocks won't work without clk_is_match that does __clk_get_hw
on the clocks first.
As we've been unconditionally already calling clk_set_parent
already because of the bogus comparison, let's just remove the
check as suggested by Stephen Boyd <sboyd@codeaurora.org>.
Cc: Michael Turquette <mturquette@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull ARM SoC non-critical fixes from Olof Johansson:
"Here's a small collection of fixes accrued during the last release
that weren't considered severe enough to merge during the -rc series.
A few of these are around resurrecting TI81xx support that's been
broken for quite a while, the rest are smaller fixes -- most for PXA
but a few across the board.
There are also some updates to MAINTAINERS here, in particular for
Broadcom platforms"
* tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
MAINTAINERS: fix git repositories for Broadcom SoCs
ARM: pxa: fix broken isa interrupts for zeus and viper
ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL enabled on UART3
ARM: OMAP: DRA7: hwmod: Make gpmc software supervised as the smart idle is broken
ARM: AM43xx: hwmod: set DSS submodule parent hwmods
ARM: OMAP2+: hwmod: print error if wait_target_ready() failed
MAINTAINERS: add maintainer for OMAP hwmod data
ARM: OMAP2+: Disable omap3 PM init for ti81xx
ARM: OMAP2+: Fix reboot for 81xx
ARM: OMAP2+: Fix dm814 and dm816 for clocks and timer init
ARM: OMAP2+: Fix ti81xx class type
ARM: OMAP2+: Fix ti81xx devtype
ARM: OMAP2+: Fix error handling for omap2_clk_enable_init_clocks
MAINTAINERS: add a git entry for BMIPS-based BCM7xxx SoCs
MAINTAINERS: add a git entry for BCM7xxx ARM-based SoCs
MAINTAINERS: update Broadcom Cygnus SoC git tree
MAINTAINERS: move BCM63xx ARM-based SoCs git tree
hx4700: regulator: declare full constraints
ARM: pxa: add regulator_has_full_constraints to spitz board file
ARM: pxa: add regulator_has_full_constraints to poodle board file
...
Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz external
crystal is not enabled at power up. Instead the CPU falls back to using
an emulation for the 32KHz clock which is SYSCLK1/610. SYSCLK1 is usually
20MHz on boards so far (which gives an emulated frequency of 32.786KHz),
but can also be 19.2 or 27MHz which result in much larger drift.
Since this is used to drive the master counter at 32.768KHz * 375 /
2 = 6.144MHz, the emulated speed for 20MHz is of by 570ppm, or about 43
seconds per day, and more than the 500ppm NTP is able to tolerate.
Checking the CTRL_CORE_BOOTSTRAP register can determine if the CPU
is using the real 32.768KHz crystal or the emulated SYSCLK1/610, and
by known that the real counter frequency can be determined and used.
The real speed is then SYSCLK1 / 610 * 375 / 2 or SYSCLK1 * 75 / 244.
Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The switch statement of the possible list of SYSCLK1 frequencies is
missing a 0 in 4 out of the 7 frequencies.
Fixes: fa6d79d276 ("ARM: OMAP: Add initialisation for the real-time counter")
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
