Changes in 4.19.325
netlink: terminate outstanding dump on socket close
ocfs2: uncache inode which has failed entering the group
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K"
media: dvbdev: fix the logic when DVB_DYNAMIC_MINORS is not set
kbuild: Use uname for LINUX_COMPILE_HOST detection
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet
mac80211: fix user-power when emulating chanctx
selftests/watchdog-test: Fix system accidentally reset after watchdog-test
x86/amd_nb: Fix compile-testing without CONFIG_AMD_NB
net: usb: qmi_wwan: add Quectel RG650V
proc/softirqs: replace seq_printf with seq_put_decimal_ull_width
nvme: fix metadata handling in nvme-passthrough
initramfs: avoid filename buffer overrun
m68k: mvme147: Fix SCSI controller IRQ numbers
m68k: mvme16x: Add and use "mvme16x.h"
m68k: mvme147: Reinstate early console
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
s390/syscalls: Avoid creation of arch/arch/ directory
hfsplus: don't query the device logical block size multiple times
EDAC/fsl_ddr: Fix bad bit shift operations
crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY
crypto: cavium - Fix the if condition to exit loop after timeout
crypto: bcm - add error check in the ahash_hmac_init function
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
time: Fix references to _msecs_to_jiffies() handling of values
soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
mmc: mmc_spi: drop buggy snprintf()
ARM: dts: cubieboard4: Fix DCDC5 regulator constraints
regmap: irq: Set lockdep class for hierarchical IRQ domains
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
drm/mm: Mark drm_mm_interval_tree*() functions with __maybe_unused
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
drm/omap: Fix locking in omap_gem_new_dmabuf()
bpf: Fix the xdp_adjust_tail sample prog issue
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_config_scan()
drm/etnaviv: consolidate hardware fence handling in etnaviv_gpu
drm/etnaviv: dump: fix sparse warnings
drm/etnaviv: fix power register offset on GC300
drm/etnaviv: hold GPU lock across perfmon sampling
net: rfkill: gpio: Add check for clk_enable()
ALSA: us122l: Use snd_card_free_when_closed() at disconnection
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
ALSA: 6fire: Release resources at card release
netpoll: Use rcu_access_pointer() in netpoll_poll_lock
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
powerpc/vdso: Flag VDSO64 entry points as functions
mfd: da9052-spi: Change read-mask to write-mask
cpufreq: loongson2: Unregister platform_driver on failure
mtd: rawnand: atmel: Fix possible memory leak
RDMA/bnxt_re: Check cqe flags to know imm_data vs inv_irkey
mfd: rt5033: Fix missing regmap_del_irq_chip()
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: fusion: Remove unused variable 'rc'
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static
fbdev/sh7760fb: Alloc DMA memory from hardware device
fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem()
dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format
dt-bindings: clock: axi-clkgen: include AXI clk
clk: axi-clkgen: use devm_platform_ioremap_resource() short-hand
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
perf probe: Correct demangled symbols in C++ program
PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads
PCI: cpqphp: Fix PCIBIOS_* return value confusion
m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x
m68k: coldfire/device.c: only build FEC when HW macros are defined
rpmsg: glink: Add TX_DATA_CONT command while sending
rpmsg: glink: Send READ_NOTIFY command in FIFO full case
rpmsg: glink: Fix GLINK command prefix
rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length
NFSD: Prevent NULL dereference in nfsd4_process_cb_update()
NFSD: Cap the number of bytes copied by nfs4_reset_recoverydir()
vfio/pci: Properly hide first-in-list PCIe extended capability
power: supply: core: Remove might_sleep() from power_supply_put()
net: usb: lan78xx: Fix memory leak on device unplug by freeing PHY device
tg3: Set coherent DMA mask bits to 31 for BCM57766 chipsets
net: usb: lan78xx: Fix refcounting and autosuspend on invalid WoL configuration
marvell: pxa168_eth: fix call balance of pep->clk handling routines
net: stmmac: dwmac-socfpga: Set RX watchdog interrupt as broken
usb: using mutex lock and supporting O_NONBLOCK flag in iowarrior_read()
USB: chaoskey: fail open after removal
USB: chaoskey: Fix possible deadlock chaoskey_list_lock
misc: apds990x: Fix missing pm_runtime_disable()
apparmor: fix 'Do simple duplicate message elimination'
usb: ehci-spear: fix call balance of sehci clk handling routines
ext4: supress data-race warnings in ext4_free_inodes_{count,set}()
ext4: fix FS_IOC_GETFSMAP handling
jfs: xattr: check invalid xattr size more strictly
ASoC: codecs: Fix atomicity violation in snd_soc_component_get_drvdata()
PCI: Fix use-after-free of slot->bus on hot remove
tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}()
ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices
Revert "usb: gadget: composite: fix OS descriptors w_value logic"
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
netfilter: ipset: add missing range check in bitmap_ip_uadt
spi: Fix acpi deferred irq probe
ubi: wl: Put source PEB into correct list if trying locking LEB failed
um: ubd: Do not use drvdata in release
um: net: Do not use drvdata in release
serial: 8250: omap: Move pm_runtime_get_sync
um: vector: Do not use drvdata in release
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
block: fix ordering between checking BLK_MQ_S_STOPPED request adding
HID: wacom: Interpret tilt data from Intuos Pro BT as signed values
media: wl128x: Fix atomicity violation in fmc_send_cmd()
usb: dwc3: gadget: Fix checking for number of TRBs left
lib: string_helpers: silence snprintf() output truncation warning
NFSD: Prevent a potential integer overflow
rpmsg: glink: Propagate TX failures in intentless mode as well
um: Fix the return value of elf_core_copy_task_fpregs
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
ubifs: Correct the total block count by deducting journal reservation
ubi: fastmap: Fix duplicate slab cache names while attaching
jffs2: fix use of uninitialized variable
block: return unsigned int from bdev_io_min
9p/xen: fix init sequence
9p/xen: fix release of IRQ
modpost: remove incorrect code in do_eisa_entry()
sh: intc: Fix use-after-free bug in register_intc_controller()
Linux 4.19.325
Change-Id: I50250c8bd11f9ff4b40da75225c1cfb060e0c258
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Changes in 4.19.316
x86/tsc: Trust initial offset in architectural TSC-adjust MSRs
speakup: Fix sizeof() vs ARRAY_SIZE() bug
ring-buffer: Fix a race between readers and resize checks
net: smc91x: Fix m68k kernel compilation for ColdFire CPU
nilfs2: fix unexpected freezing of nilfs_segctor_sync()
nilfs2: fix potential hang in nilfs_detach_log_writer()
tty: n_gsm: fix possible out-of-bounds in gsm0_receive()
wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt class
net: usb: qmi_wwan: add Telit FN920C04 compositions
drm/amd/display: Set color_mgmt_changed to true on unsuspend
ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating
ASoC: dt-bindings: rt5645: add cbj sleeve gpio property
ASoC: da7219-aad: fix usage of device_get_named_child_node()
crypto: bcm - Fix pointer arithmetic
firmware: raspberrypi: Use correct device for DMA mappings
ecryptfs: Fix buffer size for tag 66 packet
nilfs2: fix out-of-range warning
parisc: add missing export of __cmpxchg_u8()
crypto: ccp - Remove forward declaration
crypto: ccp - drop platform ifdef checks
s390/cio: fix tracepoint subchannel type field
jffs2: prevent xattr node from overflowing the eraseblock
null_blk: Fix missing mutex_destroy() at module removal
md: fix resync softlockup when bitmap size is less than array size
power: supply: cros_usbpd: provide ID table for avoiding fallback match
nfsd: drop st_mutex before calling move_to_close_lru()
wifi: ath10k: poll service ready message before failing
x86/boot: Ignore relocations in .notes sections in walk_relocs() too
qed: avoid truncating work queue length
scsi: ufs: qcom: Perform read back after writing reset bit
scsi: ufs: cleanup struct utp_task_req_desc
scsi: ufs: add a low-level __ufshcd_issue_tm_cmd helper
scsi: ufs: core: Perform read back after disabling interrupts
scsi: ufs: core: Perform read back after disabling UIC_COMMAND_COMPL
irqchip/alpine-msi: Fix off-by-one in allocation error path
ACPI: disable -Wstringop-truncation
scsi: libsas: Fix the failure of adding phy with zero-address to port
scsi: hpsa: Fix allocation size for Scsi_Host private data
x86/purgatory: Switch to the position-independent small code model
wifi: ath10k: Fix an error code problem in ath10k_dbg_sta_write_peer_debug_trigger()
wifi: ath10k: populate board data for WCN3990
macintosh/via-macii: Remove BUG_ON assertions
macintosh/via-macii, macintosh/adb-iop: Clean up whitespace
macintosh/via-macii: Fix "BUG: sleeping function called from invalid context"
wifi: carl9170: add a proper sanity check for endpoints
wifi: ar5523: enable proper endpoint verification
sh: kprobes: Merge arch_copy_kprobe() into arch_prepare_kprobe()
Revert "sh: Handle calling csum_partial with misaligned data"
scsi: bfa: Ensure the copied buf is NUL terminated
scsi: qedf: Ensure the copied buf is NUL terminated
wifi: mwl8k: initialize cmd->addr[] properly
net: usb: sr9700: stop lying about skb->truesize
m68k: Fix spinlock race in kernel thread creation
m68k/mac: Use '030 reset method on SE/30
m68k: mac: Fix reboot hang on Mac IIci
net: ethernet: cortina: Locking fixes
af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg
net: usb: smsc95xx: stop lying about skb->truesize
net: openvswitch: fix overwriting ct original tuple for ICMPv6
ipv6: sr: add missing seg6_local_exit
ipv6: sr: fix incorrect unregister order
ipv6: sr: fix invalid unregister error path
drm/amd/display: Fix potential index out of bounds in color transformation function
mtd: rawnand: hynix: fixed typo
fbdev: shmobile: fix snprintf truncation
drm/mediatek: Add 0 size check to mtk_drm_gem_obj
powerpc/fsl-soc: hide unused const variable
fbdev: sisfb: hide unused variables
media: ngene: Add dvb_ca_en50221_init return value check
media: radio-shark2: Avoid led_names truncations
fbdev: sh7760fb: allow modular build
drm/arm/malidp: fix a possible null pointer dereference
ASoC: tracing: Export SND_SOC_DAPM_DIR_OUT to its value
RDMA/hns: Use complete parentheses in macros
x86/insn: Fix PUSH instruction in x86 instruction decoder opcode map
ext4: avoid excessive credit estimate in ext4_tmpfile()
SUNRPC: Fix gss_free_in_token_pages()
selftests/kcmp: Make the test output consistent and clear
selftests/kcmp: remove unused open mode
RDMA/IPoIB: Fix format truncation compilation errors
netrom: fix possible dead-lock in nr_rt_ioctl()
af_packet: do not call packet_read_pending() from tpacket_destruct_skb()
sched/topology: Don't set SD_BALANCE_WAKE on cpuset domain relax
sched/fair: Allow disabling sched_balance_newidle with sched_relax_domain_level
greybus: lights: check return of get_channel_from_mode
dmaengine: idma64: Add check for dma_set_max_seg_size
firmware: dmi-id: add a release callback function
serial: max3100: Lock port->lock when calling uart_handle_cts_change()
serial: max3100: Update uart_driver_registered on driver removal
serial: max3100: Fix bitwise types
greybus: arche-ctrl: move device table to its right location
microblaze: Remove gcc flag for non existing early_printk.c file
microblaze: Remove early printk call from cpuinfo-static.c
usb: gadget: u_audio: Clear uac pointer when freed.
stm class: Fix a double free in stm_register_device()
ppdev: Remove usage of the deprecated ida_simple_xx() API
ppdev: Add an error check in register_device
extcon: max8997: select IRQ_DOMAIN instead of depending on it
f2fs: add error prints for debugging mount failure
f2fs: fix to release node block count in error path of f2fs_new_node_page()
serial: sh-sci: Extract sci_dma_rx_chan_invalidate()
serial: sh-sci: protect invalidating RXDMA on shutdown
libsubcmd: Fix parse-options memory leak
Input: ims-pcu - fix printf string overflow
Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation
drm/msm/dpu: use kms stored hw mdp block
um: Fix return value in ubd_init()
um: Add winch to winch_handlers before registering winch IRQ
media: stk1160: fix bounds checking in stk1160_copy_video()
powerpc/pseries: Add failure related checks for h_get_mpp and h_get_ppp
um: Fix the -Wmissing-prototypes warning for __switch_mm
media: cec: cec-adap: always cancel work in cec_transmit_msg_fh
media: cec: cec-api: add locking in cec_release()
null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
nfc: nci: Fix uninit-value in nci_rx_work
ipv6: sr: fix memleak in seg6_hmac_init_algo
params: lift param_set_uint_minmax to common code
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
openvswitch: Set the skbuff pkt_type for proper pmtud support.
arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
net: fec: avoid lock evasion when reading pps_enable
nfc: nci: Fix kcov check in nci_rx_work()
nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu()
spi: Don't mark message DMA mapped when no transfer in it is
nvmet: fix ns enable/disable possible hang
net/mlx5e: Use rx_missed_errors instead of rx_dropped for reporting buffer exhaustion
dma-buf/sw-sync: don't enable IRQ from sync_print_obj()
enic: Validate length of nl attributes in enic_set_vf_port
smsc95xx: remove redundant function arguments
smsc95xx: use usbnet->driver_priv
net: usb: smsc95xx: fix changing LED_SEL bit value updated from EEPROM
net:fec: Add fec_enet_deinit()
kconfig: fix comparison to constant symbols, 'm', 'n'
ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
ALSA: timer: Set lower bound of start tick time
genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
SUNRPC: Fix loop termination condition in gss_free_in_token_pages()
binder: fix max_thread type inconsistency
mmc: core: Do not force a retune before RPMB switch
nilfs2: fix use-after-free of timer for log writer thread
vxlan: Fix regression when dropping packets due to invalid src addresses
neighbour: fix unaligned access to pneigh_entry
ata: pata_legacy: make legacy_exit() work again
arm64: tegra: Correct Tegra132 I2C alias
md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING
wifi: rtl8xxxu: Fix the TX power of RTL8192CU, RTL8723AU
arm64: dts: hi3798cv200: fix the size of GICR
media: mxl5xx: Move xpt structures off stack
media: v4l2-core: hold videodev_lock until dev reg, finishes
fbdev: savage: Handle err return when savagefb_check_var failed
netfilter: nf_tables: pass context to nft_set_destroy()
netfilter: nftables: rename set element data activation/deactivation functions
netfilter: nf_tables: drop map element references from preparation phase
netfilter: nft_set_rbtree: allow loose matching of closing element in interval
netfilter: nft_set_rbtree: Add missing expired checks
netfilter: nft_set_rbtree: Switch to node list walk for overlap detection
netfilter: nft_set_rbtree: fix null deref on element insertion
netfilter: nft_set_rbtree: fix overlap expiration walk
netfilter: nf_tables: don't skip expired elements during walk
netfilter: nf_tables: GC transaction API to avoid race with control plane
netfilter: nf_tables: adapt set backend to use GC transaction API
netfilter: nf_tables: remove busy mark and gc batch API
netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
netfilter: nf_tables: GC transaction race with netns dismantle
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nft_set_rbtree: use read spinlock to avoid datapath contention
netfilter: nft_set_hash: try later when GC hits EAGAIN on iteration
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: unregister flowtable hooks on netns exit
netfilter: nf_tables: double hook unregistration in netns path
netfilter: nftables: update table flags from the commit phase
netfilter: nf_tables: fix table flag updates
netfilter: nf_tables: disable toggling dormant table state more than once
netfilter: nf_tables: bogus EBUSY when deleting flowtable after flush (for 4.19)
netfilter: nft_dynset: fix timeouts later than 23 days
netfilter: nftables: exthdr: fix 4-byte stack OOB write
netfilter: nft_dynset: report EOPNOTSUPP on missing set feature
netfilter: nft_dynset: relax superfluous check on set updates
netfilter: nf_tables: mark newset as dead on transaction abort
netfilter: nf_tables: skip dead set elements in netlink dump
netfilter: nf_tables: validate NFPROTO_* family
netfilter: nft_set_rbtree: skip end interval element from gc
netfilter: nf_tables: set dormant flag on hook register failure
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
netfilter: nf_tables: do not compare internal table flags on updates
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: discard table flag update with pending basechain deletion
KVM: arm64: Allow AArch32 PSTATE.M to be restored as System mode
crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak
net/9p: fix uninit-value in p9_client_rpc()
intel_th: pci: Add Meteor Lake-S CPU support
sparc64: Fix number of online CPUs
kdb: Fix buffer overflow during tab-complete
kdb: Use format-strings rather than '\0' injection in kdb_read()
kdb: Fix console handling when editing and tab-completing commands
kdb: Merge identical case statements in kdb_read()
kdb: Use format-specifiers rather than memset() for padding in kdb_read()
net: fix __dst_negative_advice() race
sparc: move struct termio to asm/termios.h
ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find()
s390/ap: Fix crash in AP internal function modify_bitmap()
nfs: fix undefined behavior in nfs_block_bits()
Linux 4.19.316
Change-Id: I51ad6b82ea33614c19b33c26ae939c4a95430d4f
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 31a5990ed253a66712d7ddc29c92d297a991fdf2 ]
When kmalloc_array() fails to allocate memory, the ubd_init()
should return -ENOMEM instead of -1. So, fix it.
Fixes: f88f0bdfc3 ("um: UBD Improvements")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 1bf6a186c4.
The patch series submitted for the 4.19-stable branch:
https://lore.kernel.org/r/20210223092859.17033-1-jefflexu@linux.alibaba.com
should be reverted from the android-4.19-stable branch as it breaks the
ABI for device_add_disk() and the issue the series is resolving does not
affect Android devices. So revert the whole thing.
Bug: 161946584
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: If2f890a6682dad1d6b0d532d35bc13fe3b8a31a9
commit fef912bf860e8e7e48a2bfb978a356bba743a8b7 upstream.
Update device_add_disk() to take an 'groups' argument so that
individual drivers can register a device with additional sysfs
attributes.
This avoids race condition the driver would otherwise have if these
groups were to be created with sysfs_add_groups().
Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6e682d53fc1ef73a169e2a5300326cb23abb32ee ]
On the hypervisor side, when completing commands and the pipe is full,
we retry writing only the entries that failed, by offsetting
io_req_buffer, but we don't reduce the number of bytes written, which
can cause a buffer overrun of io_req_buffer, and write garbage to the
pipe.
Cc: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
1. Removes the need to walk the IRQ/Device list to determine
who triggered the IRQ.
2. Improves scalability (up to several times performance
improvement for cases with 10s of devices).
3. Improves UML baseline IO performance for one disk + one NIC
use case by up to 10%.
4. Introduces write poll triggered IRQs.
5. Prerequisite for introducing high performance mmesg family
of functions in network IO.
6. Fixes RNG shutdown which was leaking a file descriptor
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Currently we use nornal Linux errno values in the block layer, and while
we accept any error a few have overloaded magic meanings. This patch
instead introduces a new blk_status_t value that holds block layer specific
status codes and explicitly explains their meaning. Helpers to convert from
and to the previous special meanings are provided for now, but I suspect
we want to get rid of them in the long run - those drivers that have a
errno input (e.g. networking) usually get errnos that don't know about
the special block layer overloads, and similarly returning them to userspace
will usually return somethings that strictly speaking isn't correct
for file system operations, but that's left as an exercise for later.
For now the set of errors is a very limited set that closely corresponds
to the previous overloaded errno values, but there is some low hanging
fruite to improve it.
blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse
typechecking, so that we can easily catch places passing the wrong values.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
UBD at present is extremely slow because it handles only
one request at a time in the IO thread and IRQ handler.
The single request at a time is replaced by handling multiple
requests as well as necessary workarounds for short reads/writes.
Resulting performance improvement in disk IO - 30%
Signed-off-by: Anton Ivanov <aivanov@kot-begemot.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
In preparation for the removal of 'driverfs_dev' from 'struct gendisk'
use a local variable to track the parented vs un-parented case in
ubd_disk_register().
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This adds a REQ_OP_FLUSH operation that is sent to request_fn
based drivers by the block layer's flush code, instead of
sending requests with the request->cmd_flags REQ_FLUSH bit set.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This decreases the number of syscalls per read/write by half.
Signed-off-by: Anton Ivanov <aivanov@brocade.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Starting with Linux 3.12 processes get stuck in D state forever in
UserModeLinux under sync heavy workloads. This bug was introduced by
commit 805f11a0d5 (um: ubd: Add REQ_FLUSH suppport).
Fix bug by adding a check if FLUSH request was successfully submitted to
the I/O thread and keeping the FLUSH request on the request queue on
submission failures.
Fixes: 805f11a0d5 (um: ubd: Add REQ_FLUSH suppport)
Signed-off-by: Thorsten Knabe <linux@thorsten-knabe.de>
Cc: stable@kernel.org # >= 3.12
Signed-off-by: Richard Weinberger <richard@nod.at>
Richard reported that some UML processes survive if the UML
main process receives a SIGTERM.
This issue was caused by a wrongly placed signal(SIGTERM, SIG_DFL)
in init_new_thread_signals().
It disabled the UML exit handler accidently for some processes.
The correct solution is to disable the fatal handler for all
UML helper threads/processes.
Such that last_ditch_exit() does not get called multiple times
and all processes can exit due to SIGTERM.
Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Just a clean-up patch to remove the open coded
variants and to ensure that all requests are submitted the
same way.
Signed-off-by: Richard Weinberger <richard@nod.at>
UML's block device driver does not support write barriers,
to support this this patch adds REQ_FLUSH suppport.
Every time the block layer sends a REQ_FLUSH we fsync() now
our backing file to guarantee data consistency.
Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The value passed is 0 in all but "it can never happen" cases (and those
only in a couple of drivers) *and* it would've been lost on the way
out anyway, even if something tried to pass something meaningful.
Just don't bother.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Made ubd_file_size not request write access. Fixes use of read-only images.
Signed-off-by: Martin Pärtel <martin.partel@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).
So now this flag is a NOOP and can be removed.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
ubd_file_size() cannot use ubd_dev->cow.file because at this time
ubd_dev->cow.file is not initialized.
Therefore, ubd_file_size() will always report a wrong disk size when
COW files are used.
Reading from /dev/ubd* would crash the kernel.
We have to read the correct disk size from the COW file's backing
file.
Signed-off-by: Richard Weinberger <richard@nod.at>
CC: stable@kernel.org
SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant
instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeff Dike <jdike@addtoit.com>
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
BKL: introduce CONFIG_BKL.
dabusb: remove the BKL
sunrpc: remove the big kernel lock
init/main.c: remove BKL notations
blktrace: remove the big kernel lock
rtmutex-tester: make it build without BKL
dvb-core: kill the big kernel lock
dvb/bt8xx: kill the big kernel lock
tlclk: remove big kernel lock
fix rawctl compat ioctls breakage on amd64 and itanic
uml: kill big kernel lock
parisc: remove big kernel lock
cris: autoconvert trivial BKL users
alpha: kill big kernel lock
isapnp: BKL removal
s390/block: kill the big kernel lock
hpet: kill BKL, add compat_ioctl
Three uml device drivers still use the big kernel lock,
but all of them can be safely converted to using
a per-driver mutex instead. Most likely this is not
even necessary, so after further review these can
and should be removed as well.
The exec system call no longer requires the BKL either,
so remove it from there, too.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: user-mode-linux-devel@lists.sourceforge.net
Commit f81f2f7c (ubd: drop unnecessary rq->sector manipulation)
dropped request->sector manipulation in preparation for global request
handling cleanup; unfortunately, it incorrectly assumed that the
updated sector wasn't being used.
ubd tries to issue as many requests as possible to io_thread. When
issuing fails due to memory pressure or other reasons, the device is
put on the restart list and issuing stops. On IO completion, devices
on the restart list are scanned and IO issuing is restarted.
ubd issues IOs sg-by-sg and issuing can be stopped in the middle of a
request, so each device on the restart queue needs to remember where
to restart in its current request. ubd needs to keep track of the
issue position itself because,
* blk_rq_pos(req) is now updated by the block layer to keep track of
_completion_ position.
* Multiple io_req's for the current request may be in flight, so it's
difficult to tell where blk_rq_pos(req) currently is.
Add ubd->rq_pos to keep track of the issue position and use it to
correctly restart io_req issue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Tested-by: Chris Frey <cdfrey@foursquare.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The open and release block_device_operations are currently
called with the BKL held. In order to change that, we must
first make sure that all drivers that currently rely
on this have no regressions.
This blindly pushes the BKL into all .open and .release
operations for all block drivers to prepare for the
next step. The drivers can subsequently replace the BKL
with their own locks or remove it completely when it can
be shown that it is not needed.
The functions blkdev_get and blkdev_put are the only
remaining users of the big kernel lock in the block
layer, besides a few uses in the ioctl code, none
of which need to serialize with blkdev_{get,put}.
Most of these two functions is also under the protection
of bdev->bd_mutex, including the actual calls to
->open and ->release, and the common code does not
access any global data structures that need the BKL.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Except for SCSI no device drivers distinguish between physical and
hardware segment limits. Consolidate the two into a single segment
limit.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The block layer calling convention is blk_queue_<limit name>.
blk_queue_max_sectors predates this practice, leading to some confusion.
Rename the function to appropriately reflect that its intended use is to
set max_hw_sectors.
Also introduce a temporary wrapper for backwards compability. This can
be removed after the merge window is closed.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Convert code away from ->read_proc/->write_proc interfaces. Switch to
proc_create()/proc_create_data() which make addition of proc entries
reliable wrt NULL ->proc_fops, NULL ->data and so on.
Problem with ->read_proc et al is described here commit
786d7e1612 "Fix rmmod/read/write races in
/proc entries"
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device. Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used. These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request(). After that, drivers are free to either dequeue it
or process it without dequeueing. Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.
Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary. However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing. Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.
Previous patches converted all block low level drivers to dequeueing
model. This patch completes the API transition by...
* renaming elv_next_request() to blk_peek_request()
* renaming blkdev_dequeue_request() to blk_start_request()
* adding blk_fetch_request() which is combination of peek and start
* disallowing completion of queued (not started) requests
* applying new API to all LLDs
Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.
[ Impact: block request issue API cleanup, no functional change ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
ubd curiously updates rq->sector while issuing the request in multiple
pieces. Don't do it and simply use local copy of sector.
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
ubd had its own block request partial completion mechanism, which is
unnecessary as block layer already does it. Kill ubd_end_request()
and ubd_finish() and replace them with direct call to
blk_end_request().
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Change ubd_id in ubd_ioctl() from 'struct hd_driveid *id'
to 'u16 *id' and update driver accordingly.
* Include <linux/ata.h> directly instead of through <linux/hdreg.h>.
There should be no functional changes caused by this patch.
Cc: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
MAJOR_NR isn't needed anymore since very early 2.5 kernels.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both. That's this changeset.
2) for each driver convert to new methods. *ALL* drivers
are converted in this series.
3) kill the old (renamed) methods.
Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain. The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.
New methods:
open(bdev, mode)
release(disk, mode)
ioctl(bdev, mode, cmd, arg) /* Called without BKL */
compat_ioctl(bdev, mode, cmd, arg)
locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make some global functions and variables static.
And remove some useless declarations for local functions, since we just need
to move their definitions ahead.
[jdike@addtoit.com: checkpatch cleanups]
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
