* refs/heads/tmp-75ff56e:
Linux 4.19.63
access: avoid the RCU grace period for the temporary subjective credentials
libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl()
powerpc/tm: Fix oops on sigreturn on systems without TM
powerpc/xive: Fix loop exit-condition in xive_find_target_in_mask()
ALSA: hda - Add a conexant codec entry to let mute led work
ALSA: line6: Fix wrong altsetting for LINE6_PODHD500_1
ALSA: ac97: Fix double free of ac97_codec_device
hpet: Fix division by zero in hpet_time_div()
mei: me: add mule creek canyon (EHL) device ids
fpga-manager: altera-ps-spi: Fix build error
binder: prevent transactions to context manager from its own process.
x86/speculation/mds: Apply more accurate check on hypervisor platform
x86/sysfb_efi: Add quirks for some devices with swapped width and height
btrfs: inode: Don't compress if NODATASUM or NODATACOW set
usb: pci-quirks: Correct AMD PLL quirk detection
usb: wusbcore: fix unbalanced get/put cluster_id
locking/lockdep: Hide unused 'class' variable
mm: use down_read_killable for locking mmap_sem in access_remote_vm
locking/lockdep: Fix lock used or unused stats error
proc: use down_read_killable mmap_sem for /proc/pid/maps
cxgb4: reduce kernel stack usage in cudbg_collect_mem_region()
proc: use down_read_killable mmap_sem for /proc/pid/map_files
proc: use down_read_killable mmap_sem for /proc/pid/clear_refs
proc: use down_read_killable mmap_sem for /proc/pid/pagemap
proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup
mm/mmu_notifier: use hlist_add_head_rcu()
memcg, fsnotify: no oom-kill for remote memcg charging
mm/gup.c: remove some BUG_ONs from get_gate_page()
mm/gup.c: mark undo_dev_pagemap as __maybe_unused
9p: pass the correct prototype to read_cache_page
mm/kmemleak.c: fix check for softirq context
sh: prevent warnings when using iounmap
block/bio-integrity: fix a memory leak bug
powerpc/eeh: Handle hugepages in ioremap space
dlm: check if workqueues are NULL before flushing/destroying
mailbox: handle failed named mailbox channel request
f2fs: avoid out-of-range memory access
block: init flush rq ref count to 1
powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
perf hists browser: Fix potential NULL pointer dereference found by the smatch tool
perf annotate: Fix dereferencing freed memory found by the smatch tool
perf session: Fix potential NULL pointer dereference found by the smatch tool
perf top: Fix potential NULL pointer dereference detected by the smatch tool
perf stat: Fix use-after-freed pointer detected by the smatch tool
perf test mmap-thread-lookup: Initialize variable to suppress memory sanitizer warning
PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions
PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers
kallsyms: exclude kasan local symbols on s390
PCI: mobiveil: Fix the Class Code field
PCI: mobiveil: Fix PCI base address in MEM/IO outbound windows
arm64: assembler: Switch ESB-instruction with a vanilla nop if !ARM64_HAS_RAS
IB/ipoib: Add child to parent list only if device initialized
powerpc/mm: Handle page table allocation failures
IB/mlx5: Fixed reporting counters on 2nd port for Dual port RoCE
serial: sh-sci: Fix TX DMA buffer flushing and workqueue races
serial: sh-sci: Terminate TX DMA during buffer flushing
RDMA/i40iw: Set queue pair state when being queried
powerpc/4xx/uic: clear pending interrupt after irq type/pol change
um: Silence lockdep complaint about mmap_sem
mm/swap: fix release_pages() when releasing devmap pages
mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
mfd: arizona: Fix undefined behavior
mfd: core: Set fwnode for created devices
mfd: madera: Add missing of table registration
recordmcount: Fix spurious mcount entries on powerpc
powerpc/xmon: Fix disabling tracing while in xmon
powerpc/cacheflush: fix variable set but not used
iio: iio-utils: Fix possible incorrect mask calculation
PCI: xilinx-nwl: Fix Multi MSI data programming
genksyms: Teach parser about 128-bit built-in types
kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS
i2c: stm32f7: fix the get_irq error cases
PCI: sysfs: Ignore lockdep for remove attribute
serial: mctrl_gpio: Check if GPIO property exisits before requesting it
drm/msm: Depopulate platform on probe failure
powerpc/pci/of: Fix OF flags parsing for 64bit BARs
mmc: sdhci: sdhci-pci-o2micro: Check if controller supports 8-bit width
usb: gadget: Zero ffs_io_data
tty: serial_core: Set port active bit in uart_port_activate
serial: imx: fix locking in set_termios()
drm/rockchip: Properly adjust to a true clock in adjusted_mode
powerpc/pseries/mobility: prevent cpu hotplug during DT update
drm/amd/display: fix compilation error
phy: renesas: rcar-gen2: Fix memory leak at error paths
drm/virtio: Add memory barriers for capset cache.
drm/amd/display: Always allocate initial connector state state
serial: 8250: Fix TX interrupt handling condition
tty: serial: msm_serial: avoid system lockup condition
tty/serial: digicolor: Fix digicolor-usart already registered warning
memstick: Fix error cleanup path of memstick_init
drm/crc-debugfs: Also sprinkle irqrestore over early exits
drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry
gpu: host1x: Increase maximum DMA segment size
drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
drm/bridge: tc358767: read display_props in get_modes()
PCI: Return error if cannot probe VF
drm/edid: Fix a missing-check bug in drm_load_edid_firmware()
drm/amdkfd: Fix sdma queue map issue
drm/amdkfd: Fix a potential memory leak
drm/amd/display: Disable ABM before destroy ABM struct
drm/amdgpu/sriov: Need to initialize the HDP_NONSURFACE_BAStE
drm/amd/display: Fill prescale_params->scale for RGB565
tty: serial: cpm_uart - fix init when SMC is relocated
pinctrl: rockchip: fix leaked of_node references
tty: max310x: Fix invalid baudrate divisors calculator
usb: core: hub: Disable hub-initiated U1/U2
staging: vt6656: use meaningful error code during buffer allocation
iio: adc: stm32-dfsdm: missing error case during probe
iio: adc: stm32-dfsdm: manage the get_irq error case
drm/panel: simple: Fix panel_simple_dsi_probe
hvsock: fix epollout hang from race condition
Change-Id: I4c37256db5ec08367a22a1c50bb97db267c822da
Signed-off-by: Ivaylo Georgiev <irgeorgiev@codeaurora.org>
[ Upstream commit 2b68a2a963a157f024c67c0697b16f5f792c8a35 ]
The ESB-instruction is a nop on CPUs that don't implement the RAS
extensions. This lets us use it in places like the vectors without
having to use alternatives.
If someone disables CONFIG_ARM64_RAS_EXTN, this instruction still has
its RAS extensions behaviour, but we no longer read DISR_EL1 as this
register does depend on alternatives.
This could go wrong if we want to synchronize an SError from a KVM
guest. On a CPU that has the RAS extensions, but the KConfig option
was disabled, we consume the pending SError with no chance of ever
reading it.
Hide the ESB-instruction behind the CONFIG_ARM64_RAS_EXTN option,
outputting a regular nop if the feature has been disabled.
Reported-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* refs/heads/tmp-26bf816:
Linux 4.19.18
ipmi: Don't initialize anything in the core until something uses it
ipmi:ssif: Fix handling of multi-part return messages
ipmi: Prevent use-after-free in deliver_response
ipmi: msghandler: Fix potential Spectre v1 vulnerabilities
ipmi: fix use-after-free of user->release_barrier.rda
Bluetooth: Fix unnecessary error message for HCI request completion
iwlwifi: mvm: Send LQ command as async when necessary
mm, proc: be more verbose about unstable VMA flags in /proc/<pid>/smaps
userfaultfd: clear flag if remap event not enabled
mm/swap: use nr_node_ids for avail_lists in swap_info_struct
mm/page-writeback.c: don't break integrity writeback on ->writepage() error
ocfs2: fix panic due to unrecovered local alloc
iomap: don't search past page end in iomap_is_partially_uptodate
scsi: megaraid: fix out-of-bound array accesses
scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
ath10k: fix peer stats null pointer dereference
scsi: smartpqi: correct lun reset issues
scsi: mpt3sas: fix memory ordering on 64bit writes
IB/usnic: Fix potential deadlock
sysfs: Disable lockdep for driver bind/unbind files
ALSA: bebob: fix model-id of unit for Apogee Ensemble
Bluetooth: btusb: Add support for Intel bluetooth device 8087:0029
dm: Check for device sector overflow if CONFIG_LBDAF is not set
clocksource/drivers/integrator-ap: Add missing of_node_put()
quota: Lock s_umount in exclusive mode for Q_XQUOTA{ON,OFF} quotactls.
perf tools: Add missing open_memstream() prototype for systems lacking it
perf tools: Add missing sigqueue() prototype for systems lacking it
perf cs-etm: Correct packets swapping in cs_etm__flush()
dm snapshot: Fix excessive memory usage and workqueue stalls
tools lib subcmd: Don't add the kernel sources to the include path
perf stat: Avoid segfaults caused by negated options
dm kcopyd: Fix bug causing workqueue stalls
dm crypt: use u64 instead of sector_t to store iv_offset
x86/topology: Use total_cpus for max logical packages calculation
netfilter: ipt_CLUSTERIP: fix deadlock in netns exit routine
netfilter: ipt_CLUSTERIP: remove wrong WARN_ON_ONCE in netns exit routine
netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set
perf vendor events intel: Fix Load_Miss_Real_Latency on SKL/SKX
perf parse-events: Fix unchecked usage of strncpy()
perf svghelper: Fix unchecked usage of strncpy()
perf tests ARM: Disable breakpoint tests 32-bit
perf intel-pt: Fix error with config term "pt=0"
tty/serial: do not free trasnmit buffer page under port lock
btrfs: improve error handling of btrfs_add_link
btrfs: fix use-after-free due to race between replace start and cancel
btrfs: alloc_chunk: fix more DUP stripe size handling
btrfs: volumes: Make sure there is no overlap of dev extents at mount time
mmc: atmel-mci: do not assume idle after atmci_request_end
kconfig: fix memory leak when EOF is encountered in quotation
kconfig: fix file name and line number of warn_ignored_character()
bpf: relax verifier restriction on BPF_MOV | BPF_ALU
arm64: Fix minor issues with the dcache_by_line_op macro
clk: imx6q: reset exclusive gates on init
arm64: kasan: Increase stack size for KASAN_EXTRA
selftests: do not macro-expand failed assertion expressions
scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enough
scsi: target: use consistent left-aligned ASCII INQUIRY data
net: call sk_dst_reset when set SO_DONTROUTE
staging: erofs: fix use-after-free of on-stack `z_erofs_vle_unzip_io'
media: venus: core: Set dma maximum segment size
ASoC: use dma_ops of parent device for acp_audio_dma
media: firewire: Fix app_info parameter type in avc_ca{,_app}_info
powerpc/pseries/cpuidle: Fix preempt warning
powerpc/xmon: Fix invocation inside lock region
media: uvcvideo: Refactor teardown of uvc on USB disconnect
pstore/ram: Do not treat empty buffers as valid
clk: imx: make mux parent strings const
jffs2: Fix use of uninitialized delayed_work, lockdep breakage
efi/libstub: Disable some warnings for x86{,_64}
rxe: IB_WR_REG_MR does not capture MR's iova field
drm/amdgpu: Reorder uvd ring init before uvd resume
scsi: qedi: Check for session online before getting iSCSI TLV data.
ASoC: pcm3168a: Don't disable pcm3168a when CONFIG_PM defined
selinux: always allow mounting submounts
fpga: altera-cvp: fix probing for multiple FPGAs on the bus
usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device
samples: bpf: fix: error handling regarding kprobe_events
clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table
drm/atomic-helper: Complete fake_commit->flip_done potentially earlier
arm64: perf: set suppress_bind_attrs flag to true
crypto: ecc - regularize scalar for scalar multiplication
MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur
x86/mce: Fix -Wmissing-prototypes warnings
ALSA: oxfw: add support for APOGEE duet FireWire
bpf: Allow narrow loads with offset > 0
serial: set suppress_bind_attrs flag only if builtin
writeback: don't decrement wb->refcnt if !wb->bdi
of: overlay: add missing of_node_put() after add new node to changeset
selftests/bpf: enable (uncomment) all tests in test_libbpf.sh
usb: typec: tcpm: Do not disconnect link for self powered devices
e1000e: allow non-monotonic SYSTIM readings
platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey
ixgbe: allow IPsec Tx offload in VEPA mode
drm/amdkfd: fix interrupt spin lock
drm/amd/display: Guard against null stream_state in set_crc_source
gpio: pl061: Move irq_chip definition inside struct pl061
netfilter: ipset: Allow matching on destination MAC address for mac and ipmac sets
net: clear skb->tstamp in bridge forwarding path
ipv6: Take rcu_read_lock in __inet6_bind for mapped addresses
r8169: Add support for new Realtek Ethernet
qmi_wwan: add MTU default to qmap network interface
net, skbuff: do not prefer skb allocation fails early
net: dsa: mv88x6xxx: mv88e6390 errata
mlxsw: spectrum_switchdev: Set PVID correctly during VLAN deletion
mlxsw: spectrum: Disable lag port TX before removing it
ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address
UPSTREAM: dm: do not allow readahead to limit IO size
UPSTREAM: ppp: Move PFC decompression to PPP generic layer
UPSTREAM: l2tp: Add protocol field decompression
Conflicts:
include/linux/swap.h
Change-Id: I72fecd7d04341015f9397afe60d8469d548b4cb6
Signed-off-by: Ivaylo Georgiev <irgeorgiev@codeaurora.org>
[ Upstream commit 33309ecda0070506c49182530abe7728850ebe78 ]
The dcache_by_line_op macro suffers from a couple of small problems:
First, the GAS directives that are currently being used rely on
assembler behavior that is not documented, and probably not guaranteed
to produce the correct behavior going forward. As a result, we end up
with some undefined symbols in cache.o:
$ nm arch/arm64/mm/cache.o
...
U civac
...
U cvac
U cvap
U cvau
This is due to the fact that the comparisons used to select the
operation type in the dcache_by_line_op macro are comparing symbols
not strings, and even though it seems that GAS is doing the right
thing here (undefined symbols by the same name are equal to each
other), it seems unwise to rely on this.
Second, when patching in a DC CVAP instruction on CPUs that support it,
the fallback path consists of a DC CVAU instruction which may be
affected by CPU errata that require ARM64_WORKAROUND_CLEAN_CACHE.
Solve these issues by unrolling the various maintenance routines and
using the conditional directives that are documented as operating on
strings. To avoid the complexity of nested alternatives, we move the
DC CVAP patching to __clean_dcache_area_pop, falling back to a branch
to __clean_dcache_area_poc if DCPOP is not supported by the CPU.
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit <d3127afa7123>
("arm64: Remove unused macros from assembler.h")
This is required for flush_cache_all to work.
Change-Id: I469602e2f35b15bf13667322f3ffbe61dab90f91
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Add support macros to conditionally yield the NEON (and thus the CPU)
that may be called from the assembler code.
In some cases, yielding the NEON involves saving and restoring a non
trivial amount of context (especially in the CRC folding algorithms),
and so the macro is split into three, and the code in between is only
executed when the yield path is taken, allowing the context to be preserved.
The third macro takes an optional label argument that marks the resume
path after a yield has been performed.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We are going to add code to all the NEON crypto routines that will
turn them into non-leaf functions, so we need to manage the stack
frames. To make this less tedious and error prone, add some macros
that take the number of callee saved registers to preserve and the
extra size to allocate in the stack frame (for locals) and emit
the ldp/stp sequences.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that we started keeping modules within 4 GB of the core kernel
in all cases, we no longer need to special case the adr_l/ldr_l/str_l
macros for modules to deal with them being loaded farther away.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pull KVM updates from Radim Krčmář:
"ARM:
- icache invalidation optimizations, improving VM startup time
- support for forwarded level-triggered interrupts, improving
performance for timers and passthrough platform devices
- a small fix for power-management notifiers, and some cosmetic
changes
PPC:
- add MMIO emulation for vector loads and stores
- allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without
requiring the complex thread synchronization of older CPU versions
- improve the handling of escalation interrupts with the XIVE
interrupt controller
- support decrement register migration
- various cleanups and bugfixes.
s390:
- Cornelia Huck passed maintainership to Janosch Frank
- exitless interrupts for emulated devices
- cleanup of cpuflag handling
- kvm_stat counter improvements
- VSIE improvements
- mm cleanup
x86:
- hypervisor part of SEV
- UMIP, RDPID, and MSR_SMI_COUNT emulation
- paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit
- allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more
AVX512 features
- show vcpu id in its anonymous inode name
- many fixes and cleanups
- per-VCPU MSR bitmaps (already merged through x86/pti branch)
- stable KVM clock when nesting on Hyper-V (merged through
x86/hyperv)"
* tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits)
KVM: PPC: Book3S: Add MMIO emulation for VMX instructions
KVM: PPC: Book3S HV: Branch inside feature section
KVM: PPC: Book3S HV: Make HPT resizing work on POWER9
KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code
KVM: PPC: Book3S PR: Fix broken select due to misspelling
KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs()
KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled
KVM: PPC: Book3S HV: Drop locks before reading guest memory
kvm: x86: remove efer_reload entry in kvm_vcpu_stat
KVM: x86: AMD Processor Topology Information
x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested
kvm: embed vcpu id to dentry of vcpu anon inode
kvm: Map PFN-type memory regions as writable (if possible)
x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n
KVM: arm/arm64: Fixup userspace irqchip static key optimization
KVM: arm/arm64: Fix userspace_irqchip_in_use counting
KVM: arm/arm64: Fix incorrect timer_is_pending logic
MAINTAINERS: update KVM/s390 maintainers
MAINTAINERS: add Halil as additional vfio-ccw maintainer
MAINTAINERS: add David as a reviewer for KVM/s390
...
In a similar manner to array_index_mask_nospec, this patch introduces an
assembly macro (mask_nospec64) which can be used to bound a value under
speculation. This macro is then used to ensure that the indirect branch
through the syscall table is bounded under speculation, with out-of-range
addresses speculating as calls to sys_io_setup (0).
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For CPUs capable of data value prediction, CSDB waits for any outstanding
predictions to architecturally resolve before allowing speculative execution
to continue. Provide macros to expose it to the arch code.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
pte_to_phys lives in assembler.h and takes its destination register as
the first argument. Move phys_to_pte out of head.S to sit with its
counterpart and rejig it to follow the same calling convention.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Since AArch64 assembly instructions take the destination register as
their first operand, do the same thing for the phys_to_ttbr macro.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Defaulting to global mappings for kernel space is generally good for
performance and appears to be necessary for Cavium ThunderX. If we
subsequently decide that we need to enable kpti, then we need to rewrite
our existing page table entries to be non-global. This is fiddly, and
made worse by the possible use of contiguous mappings, which require
a strict break-before-make sequence.
Since the enable callback runs on each online CPU from stop_machine
context, we can have all CPUs enter the idmap, where secondaries can
wait for the primary CPU to rewrite swapper with its MMU off. It's all
fairly horrible, but at least it only runs once.
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The ARM architecture defines the memory locations that are permitted
to be accessed as the result of a speculative instruction fetch from
an exception level for which all stages of translation are disabled.
Specifically, the core is permitted to speculatively fetch from the
4KB region containing the current program counter 4K and next 4K.
When translation is changed from enabled to disabled for the running
exception level (SCTLR_ELn[M] changed from a value of 1 to 0), the
Falkor core may errantly speculatively access memory locations outside
of the 4KB region permitted by the architecture. The errant memory
access may lead to one of the following unexpected behaviors.
1) A System Error Interrupt (SEI) being raised by the Falkor core due
to the errant memory access attempting to access a region of memory
that is protected by a slave-side memory protection unit.
2) Unpredictable device behavior due to a speculative read from device
memory. This behavior may only occur if the instruction cache is
disabled prior to or coincident with translation being changed from
enabled to disabled.
The conditions leading to this erratum will not occur when either of the
following occur:
1) A higher exception level disables translation of a lower exception level
(e.g. EL2 changing SCTLR_EL1[M] from a value of 1 to 0).
2) An exception level disabling its stage-1 translation if its stage-2
translation is enabled (e.g. EL1 changing SCTLR_EL1[M] from a value of 1
to 0 when HCR_EL2[VM] has a value of 1).
To avoid the errant behavior, software must execute an ISB immediately
prior to executing the MSR that will change SCTLR_ELn[M] from 1 to 0.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
KVM would like to consume any pending SError (or RAS error) after guest
exit. Today it has to unmask SError and use dsb+isb to synchronise the
CPU. With the RAS extensions we can use ESB to synchronise any pending
SError.
Add the necessary macros to allow DISR to be read and converted to an
ESR.
We clear the DISR register when we enable the RAS cpufeature, and the
kernel has not executed any ESB instructions. Any value we find in DISR
must have belonged to firmware. Executing an ESB instruction is the
only way to update DISR, so we can expect firmware to have handled
any deferred SError. By the same logic we clear DISR in the idle path.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The 'pos' argument is used to select where in TCR to write the value:
the IPS or PS bitfield.
Fixes: 787fd1d019 ("arm64: limit PA size to supported range")
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that KVM uses tpidr_el2 in the same way as Linux's cpu_offset in
tpidr_el1, merge the two. This saves KVM from save/restoring tpidr_el1
on VHE hosts, and allows future code to blindly access per-cpu variables
without triggering world-switch.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We will soon need to invoke a CPU-specific function pointer after changing
page tables, so move post_ttbr_update_workaround out into C code to make
this possible.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We currently tightly couple dcache clean with icache invalidation,
but KVM could do without the initial flush to PoU, as we've
already flushed things to PoC.
Let's introduce invalidate_icache_range which is limited to
invalidating the icache from the linear mapping (and thus
has none of the userspace fault handling complexity), and
wire it in KVM instead of flush_icache_range.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
* for-next/52-bit-pa:
arm64: enable 52-bit physical address support
arm64: allow ID map to be extended to 52 bits
arm64: handle 52-bit physical addresses in page table entries
arm64: don't open code page table entry creation
arm64: head.S: handle 52-bit PAs in PTEs in early page table setup
arm64: handle 52-bit addresses in TTBR
arm64: limit PA size to supported range
arm64: add kconfig symbol to configure physical address size
Currently, when using VA_BITS < 48, if the ID map text happens to be
placed in physical memory above VA_BITS, we increase the VA size (up to
48) and create a new table level, in order to map in the ID map text.
This is okay because the system always supports 48 bits of VA.
This patch extends the code such that if the system supports 52 bits of
VA, and the ID map text is placed that high up, then we increase the VA
size accordingly, up to 52.
One difference from the current implementation is that so far the
condition of VA_BITS < 48 has meant that the top level table is always
"full", with the maximum number of entries, and an extra table level is
always needed. Now, when VA_BITS = 48 (and using 64k pages), the top
level table is not full, and we simply need to increase the number of
entries in it, instead of creating a new table level.
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
[catalin.marinas@arm.com: reduce arguments to __create_hyp_mappings()]
[catalin.marinas@arm.com: reworked/renamed __cpu_uses_extended_idmap_level()]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The top 4 bits of a 52-bit physical address are positioned at bits 2..5
in the TTBR registers. Introduce a couple of macros to move the bits
there, and change all TTBR writers to use them.
Leave TTBR0 PAN code unchanged, to avoid complicating it. A system with
52-bit PA will have PAN anyway (because it's ARMv8.1 or later), and a
system without 52-bit PA can only use up to 48-bit PAs. A later patch in
this series will add a kconfig dependency to ensure PAN is configured.
In addition, when using 52-bit PA there is a special alignment
requirement on the top-level table. We don't currently have any VA_BITS
configuration that would violate the requirement, but one could be added
in the future, so add a compile-time BUG_ON to check for it.
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
[catalin.marinas@arm.com: added TTBR_BADD_MASK_52 comment]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We currently copy the physical address size from
ID_AA64MMFR0_EL1.PARange directly into TCR.(I)PS. This will not work for
4k and 16k granule kernels on systems that support 52-bit physical
addresses, since 52-bit addresses are only permitted with the 64k
granule.
To fix this, fall back to 48 bits when configuring the PA size when the
kernel does not support 52-bit PAs. When it does, fall back to 52, to
avoid similar problems in the future if the PA size is ever increased
above 52.
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
[catalin.marinas@arm.com: tcr_set_pa_size macro renamed to tcr_compute_pa_size]
[catalin.marinas@arm.com: comments added to tcr_compute_pa_size]
[catalin.marinas@arm.com: definitions added for TCR_*PS_SHIFT]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The ARM architecture defines the memory locations that are permitted
to be accessed as the result of a speculative instruction fetch from
an exception level for which all stages of translation are disabled.
Specifically, the core is permitted to speculatively fetch from the
4KB region containing the current program counter 4K and next 4K.
When translation is changed from enabled to disabled for the running
exception level (SCTLR_ELn[M] changed from a value of 1 to 0), the
Falkor core may errantly speculatively access memory locations outside
of the 4KB region permitted by the architecture. The errant memory
access may lead to one of the following unexpected behaviors.
1) A System Error Interrupt (SEI) being raised by the Falkor core due
to the errant memory access attempting to access a region of memory
that is protected by a slave-side memory protection unit.
2) Unpredictable device behavior due to a speculative read from device
memory. This behavior may only occur if the instruction cache is
disabled prior to or coincident with translation being changed from
enabled to disabled.
The conditions leading to this erratum will not occur when either of the
following occur:
1) A higher exception level disables translation of a lower exception level
(e.g. EL2 changing SCTLR_EL1[M] from a value of 1 to 0).
2) An exception level disabling its stage-1 translation if its stage-2
translation is enabled (e.g. EL1 changing SCTLR_EL1[M] from a value of 1
to 0 when HCR_EL2[VM] has a value of 1).
To avoid the errant behavior, software must execute an ISB immediately
prior to executing the MSR that will change SCTLR_ELn[M] from 1 to 0.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The post_ttbr0_update_workaround hook applies to any change to TTBRx_EL1.
Since we're using TTBR1 for the ASID, rename the hook to make it clearer
as to what it's doing.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The pre_ttbr0_update_workaround hook is called prior to context-switching
TTBR0 because Falkor erratum E1003 can cause TLB allocation with the wrong
ASID if both the ASID and the base address of the TTBR are updated at
the same time.
With the ASID sitting safely in TTBR1, we no longer update things
atomically, so we can remove the pre_ttbr0_update_workaround macro as
it's no longer required. The erratum infrastructure and documentation
is left around for #E1003, as it will be required by the entry
trampoline code in a future patch.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Following our 'dai' order, irqs should be processed with debug and
serror exceptions unmasked.
Add a helper to unmask these two, (and fiq for good measure).
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
el0_sync also unmasks exceptions on a case-by-case basis, debug exceptions
are enabled, unless this was a debug exception. Irqs are unmasked for
some exception types but not for others.
el0_dbg should run with everything masked to prevent us taking a debug
exception from do_debug_exception. For the other cases we can unmask
everything. This changes the behaviour of fpsimd_{acc,exc} and el0_inv
which previously ran with irqs masked.
This patch removed the last user of enable_dbg_and_irq, remove it.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
el1_sync unmasks exceptions on a case-by-case basis, debug exceptions
are unmasked, unless this was a debug exception. IRQs are unmasked
for instruction and data aborts only if the interupted context had
irqs unmasked.
Following our 'dai' order, el1_dbg should run with everything masked.
For the other cases we can inherit whatever we interrupted.
Add a macro inherit_daif to set daif based on the interrupted pstate.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
enable_step_tsk is the only user of disable_dbg, which doesn't respect
our 'dai' order for exception masking. enable_step_tsk may enable
single-step, so previously needed to mask debug exceptions to prevent us
from single-stepping kernel_exit. enable_step_tsk is called at the end
of the ret_to_user loop, which has already masked all exceptions so this
is no longer needed.
Remove disable_dbg, add a comment that enable_step_tsk's caller should
have masked debug.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
There are a few places where we want to mask all exceptions. Today we
do this in a piecemeal fashion, typically we expect the caller to
have masked irqs and the arch code masks debug exceptions, ignoring
serror which is probably masked.
Make it clear that 'mask all exceptions' is the intention by adding
helpers to do exactly that.
This will let us unmask SError without having to add 'oh and SError'
to these paths.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Given that adr_this_cpu already requires a temp register in addition
to the destination register, tweak the instruction sequence so that sp
may be used as well.
This will simplify switching to per-cpu stacks in subsequent patches. While
this limits the range of adr_this_cpu, to +/-4GiB, we don't currently use
adr_this_cpu in modules, and this is not problematic for the main kernel image.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[Mark: add more commit text]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Add a clean-to-point-of-persistence cache maintenance helper, and wire
up the basic architectural support for the pmem driver based on it.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[catalin.marinas@arm.com: move arch_*_pmem() functions to arch/arm64/mm/flush.c]
[catalin.marinas@arm.com: change dmb(sy) to dmb(osh)]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently, cpu_switch_to and ret_from_fork both live in .entry.text,
though neither form the critical path for an exception entry.
In subsequent patches, we will require that code in .entry.text is part
of the critical path for exception entry, for which we can assume
certain properties (e.g. the presence of exception regs on the stack).
Neither cpu_switch_to nor ret_from_fork will meet these requirements, so
we must move them out of .entry.text. To ensure that neither are kprobed
after being moved out of .entry.text, we must explicitly blacklist them,
requiring a new NOKPROBE() asm helper.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Pull arm64 updates from Will Deacon:
- Errata workarounds for Qualcomm's Falkor CPU
- Qualcomm L2 Cache PMU driver
- Qualcomm SMCCC firmware quirk
- Support for DEBUG_VIRTUAL
- CPU feature detection for userspace via MRS emulation
- Preliminary work for the Statistical Profiling Extension
- Misc cleanups and non-critical fixes
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (74 commits)
arm64/kprobes: consistently handle MRS/MSR with XZR
arm64: cpufeature: correctly handle MRS to XZR
arm64: traps: correctly handle MRS/MSR with XZR
arm64: ptrace: add XZR-safe regs accessors
arm64: include asm/assembler.h in entry-ftrace.S
arm64: fix warning about swapper_pg_dir overflow
arm64: Work around Falkor erratum 1003
arm64: head.S: Enable EL1 (host) access to SPE when entered at EL2
arm64: arch_timer: document Hisilicon erratum 161010101
arm64: use is_vmalloc_addr
arm64: use linux/sizes.h for constants
arm64: uaccess: consistently check object sizes
perf: add qcom l2 cache perf events driver
arm64: remove wrong CONFIG_PROC_SYSCTL ifdef
ARM: smccc: Update HVC comment to describe new quirk parameter
arm64: do not trace atomic operations
ACPI/IORT: Fix the error return code in iort_add_smmu_platform_device()
ACPI/IORT: Fix iort_node_get_id() mapping entries indexing
arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA
perf: xgene: Include module.h
...
The Qualcomm Datacenter Technologies Falkor v1 CPU may allocate TLB entries
using an incorrect ASID when TTBRx_EL1 is being updated. When the erratum
is triggered, page table entries using the new translation table base
address (BADDR) will be allocated into the TLB using the old ASID. All
circumstances leading to the incorrect ASID being cached in the TLB arise
when software writes TTBRx_EL1[ASID] and TTBRx_EL1[BADDR], a memory
operation is in the process of performing a translation using the specific
TTBRx_EL1 being written, and the memory operation uses a translation table
descriptor designated as non-global. EL2 and EL3 code changing the EL1&0
ASID is not subject to this erratum because hardware is prohibited from
performing translations from an out-of-context translation regime.
Consider the following pseudo code.
write new BADDR and ASID values to TTBRx_EL1
Replacing the above sequence with the one below will ensure that no TLB
entries with an incorrect ASID are used by software.
write reserved value to TTBRx_EL1[ASID]
ISB
write new value to TTBRx_EL1[BADDR]
ISB
write new value to TTBRx_EL1[ASID]
ISB
When the above sequence is used, page table entries using the new BADDR
value may still be incorrectly allocated into the TLB using the reserved
ASID. Yet this will not reduce functionality, since TLB entries incorrectly
tagged with the reserved ASID will never be hit by a later instruction.
Based on work by Shanker Donthineni <shankerd@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When CONFIG_RANDOMIZE_MODULE_REGION_FULL=y, the offset between loaded
modules and the core kernel may exceed 4 GB, putting symbols exported
by the core kernel out of the reach of the ordinary adrp/add instruction
pairs used to generate relative symbol references. So make the adr_l
macro emit a movz/movk sequence instead when executing in module context.
While at it, remove the pointless special case for the stack pointer.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds the uaccess macros/functions to disable access to user
space by setting TTBR0_EL1 to a reserved zeroed page. Since the value
written to TTBR0_EL1 must be a physical address, for simplicity this
patch introduces a reserved_ttbr0 page at a constant offset from
swapper_pg_dir. The uaccess_disable code uses the ttbr1_el1 value
adjusted by the reserved_ttbr0 offset.
Enabling access to user is done by restoring TTBR0_EL1 with the value
from the struct thread_info ttbr0 variable. Interrupts must be disabled
during the uaccess_ttbr0_enable code to ensure the atomicity of the
thread_info.ttbr0 read and TTBR0_EL1 write. This patch also moves the
get_thread_info asm macro from entry.S to assembler.h for reuse in the
uaccess_ttbr0_* macros.
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Shortly we will want to load a percpu variable in the return from
userspace path. We can save an instruction by folding the addition of
the percpu offset into the load instruction, and this patch adds a new
helper to do so.
At the same time, we clean up this_cpu_ptr for consistency. As with
{adr,ldr,str}_l, we change the template to take the destination register
first, and name this dst. Secondly, we rename the macro to adr_this_cpu,
following the scheme of adr_l, and matching the newly added
ldr_this_cpu.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
NOP sequences tend to get used for padding out alternative sections
and uarch-specific pipeline flushes in errata workarounds.
This patch adds macros for generating these sequences as both inline
asm blocks, but also as strings suitable for embedding in other asm
blocks directly.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Systems with differing CPU i-cache/d-cache line sizes can cause
problems with the cache management by software when the execution
is migrated from one to another. Usually, the application reads
the cache size on a CPU and then uses that length to perform cache
operations. However, if it gets migrated to another CPU with a smaller
cache line size, things could go completely wrong. To prevent such
cases, always use the smallest cache line size among the CPUs. The
kernel CPU feature infrastructure already keeps track of the safe
value for all CPUID registers including CTR. This patch works around
the problem by :
For kernel, dynamically patch the kernel to read the cache size
from the system wide copy of CTR_EL0.
For applications, trap read accesses to CTR_EL0 (by clearing the SCTLR.UCT)
and emulate the mrs instruction to return the system wide safe value
of CTR_EL0.
For faster access (i.e, avoiding to lookup the system wide value of CTR_EL0
via read_system_reg), we keep track of the pointer to table entry for
CTR_EL0 in the CPU feature infrastructure.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
On systems with mismatched i/d cache min line sizes, we need to use
the smallest size possible across all CPUs. This will be done by fetching
the system wide safe value from CPU feature infrastructure.
However the some special users(e.g kexec, hibernate) would need the line
size on the CPU (rather than the system wide), when either the system
wide feature may not be accessible or it is guranteed that the caller
executes with a gurantee of no migration.
Provide another helper which will fetch cache line size on the current CPU.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Reviewed-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The newly introduced dcache_by_line_op macro is used at least in
one occassion at the moment to issue a "dc cvau" instruction,
which is affected by ARM errata 819472, 826319, 827319 and 824069.
Change the macro to allow for alternative patching in there to
protect affected Cortex-A53 cores.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[catalin.marinas@arm.com: indentation fixups]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Kexec and hibernate need to copy pages of memory, but may not have all
of the kernel mapped, and are unable to call copy_page().
Add a simplistic copy_page() macro, that can be inlined in these
situations. lib/copy_page.S provides a bigger better version, but
uses more registers.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Changed asm label to 9998, added commit message]
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
