Merge "Merge android-4.19-q.81 (9045ee1) into msm-4.19"

Documentation/usb/rio.txt

@@ -1,138 +0,0 @@
-Copyright (C) 1999, 2000 Bruce Tenison
-Portions Copyright (C) 1999, 2000 David Nelson
-Thanks to David Nelson for guidance and the usage of the scanner.txt
-and scanner.c files to model our driver and this informative file.
-
-Mar. 2, 2000
-
-CHANGES
-
-- Initial Revision
-
-
-OVERVIEW
-
-This README will address issues regarding how to configure the kernel
-to access a RIO 500 mp3 player.  
-Before I explain how to use this to access the Rio500 please be warned:
-
-W A R N I N G:
---------------
-
-Please note that this software is still under development.  The authors
-are in no way responsible for any damage that may occur, no matter how
-inconsequential.
-
-It seems that the Rio has a problem when sending .mp3 with low batteries.
-I suggest when the batteries are low and you want to transfer stuff that you
-replace it with a fresh one. In my case, what happened is I lost two 16kb
-blocks (they are no longer usable to store information to it). But I don't
-know if that's normal or not; it could simply be a problem with the flash 
-memory.
-
-In an extreme case, I left my Rio playing overnight and the batteries wore 
-down to nothing and appear to have corrupted the flash memory. My RIO 
-needed to be replaced as a result.  Diamond tech support is aware of the 
-problem.  Do NOT allow your batteries to wear down to nothing before 
-changing them.  It appears RIO 500 firmware does not handle low battery 
-power well at all. 
-
-On systems with OHCI controllers, the kernel OHCI code appears to have 
-power on problems with some chipsets.  If you are having problems 
-connecting to your RIO 500, try turning it on first and then plugging it 
-into the USB cable.  
-
-Contact information:
---------------------
-
-   The main page for the project is hosted at sourceforge.net in the following
-   URL: <http://rio500.sourceforge.net>. You can also go to the project's
-   sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
-   There is also a mailing list: rio500-users@lists.sourceforge.net
-
-Authors:
--------
-
-Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith 
-Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
-things work there. Bruce Tenison <btenison@dibbs.net> is adding support
-for .fon files and also does testing. The program will mostly sure be
-re-written and Pete Ikusz along with the rest will re-design it. I would
-also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use 
-with some important information regarding the communication with the Rio.
-
-ADDITIONAL INFORMATION and Userspace tools
-
-http://rio500.sourceforge.net/
-
-
-REQUIREMENTS
-
-A host with a USB port.  Ideally, either a UHCI (Intel) or OHCI
-(Compaq and others) hardware port should work.
-
-A Linux development kernel (2.3.x) with USB support enabled or a
-backported version to linux-2.2.x.  See http://www.linux-usb.org for
-more information on accomplishing this.
-
-A Linux kernel with RIO 500 support enabled.
-
-'lspci' which is only needed to determine the type of USB hardware
-available in your machine.
-
-CONFIGURATION
-
-Using `lspci -v`, determine the type of USB hardware available.
-
-  If you see something like:
-
-    USB Controller: ......
-    Flags: .....
-    I/O ports at ....
-
-  Then you have a UHCI based controller.
-
-  If you see something like:
-
-     USB Controller: .....
-     Flags: ....
-     Memory at .....
-
-  Then you have a OHCI based controller.
-
-Using `make menuconfig` or your preferred method for configuring the
-kernel, select 'Support for USB', 'OHCI/UHCI' depending on your
-hardware (determined from the steps above), 'USB Diamond Rio500 support', and
-'Preliminary USB device filesystem'.  Compile and install the modules
-(you may need to execute `depmod -a` to update the module
-dependencies).
-
-Add a device for the USB rio500:
-  `mknod /dev/usb/rio500 c 180 64`
-
-Set appropriate permissions for /dev/usb/rio500 (don't forget about
-group and world permissions).  Both read and write permissions are
-required for proper operation.
-
-Load the appropriate modules (if compiled as modules):
-
-  OHCI:
-    modprobe usbcore
-    modprobe usb-ohci
-    modprobe rio500
-
-  UHCI:
-    modprobe usbcore
-    modprobe usb-uhci  (or uhci)
-    modprobe rio500
-
-That's it.  The Rio500 Utils at: http://rio500.sourceforge.net should
-be able to access the rio500.
-
-BUGS
-
-If you encounter any problems feel free to drop me an email.
-
-Bruce Tenison
-btenison@dibbs.net
-

MAINTAINERS

@@ -15125,13 +15125,6 @@ W:	http://www.linux-usb.org/usbnet
 S:	Maintained
 F:	drivers/net/usb/dm9601.c
 
-USB DIAMOND RIO500 DRIVER
-M:	Cesar Miquel <miquel@df.uba.ar>
-L:	rio500-users@lists.sourceforge.net
-W:	http://rio500.sourceforge.net
-S:	Maintained
-F:	drivers/usb/misc/rio500*
-
 USB EHCI DRIVER
 M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 79
+SUBLEVEL = 81
 EXTRAVERSION =
 NAME = "People's Front"
 

arch/arm/boot/dts/am4372.dtsi

@@ -1142,6 +1142,8 @@
 				ti,hwmods = "dss_dispc";
 				clocks = <&disp_clk>;
 				clock-names = "fck";
+
+				max-memory-bandwidth = <230000000>;
 			};
 
 			rfbi: rfbi@4832a800 {

arch/arm/configs/badge4_defconfig

@@ -91,7 +91,6 @@ CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=m
 CONFIG_MSDOS_FS=y

arch/arm/configs/corgi_defconfig

@@ -197,7 +197,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m

arch/arm/configs/pxa_defconfig

@@ -588,7 +588,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m

arch/arm/configs/s3c2410_defconfig

@@ -334,7 +334,6 @@ CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
 CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYPRESS_CY7C63=m

arch/arm/configs/spitz_defconfig

@@ -191,7 +191,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c

@@ -946,7 +946,8 @@ static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_RESET_STATUS,
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			  SIDLE_SMART_WKUP),
 	.sysc_fields	= &omap_hwmod_sysc_type2,

arch/arm/mach-omap2/pm.c

@@ -77,83 +77,6 @@ int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
 	return 0;
 }
 
-/*
- * This API is to be called during init to set the various voltage
- * domains to the voltage as per the opp table. Typically we boot up
- * at the nominal voltage. So this function finds out the rate of
- * the clock associated with the voltage domain, finds out the correct
- * opp entry and sets the voltage domain to the voltage specified
- * in the opp entry
- */
-static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
-					 const char *oh_name)
-{
-	struct voltagedomain *voltdm;
-	struct clk *clk;
-	struct dev_pm_opp *opp;
-	unsigned long freq, bootup_volt;
-	struct device *dev;
-
-	if (!vdd_name || !clk_name || !oh_name) {
-		pr_err("%s: invalid parameters\n", __func__);
-		goto exit;
-	}
-
-	if (!strncmp(oh_name, "mpu", 3))
-		/* 
-		 * All current OMAPs share voltage rail and clock
-		 * source, so CPU0 is used to represent the MPU-SS.
-		 */
-		dev = get_cpu_device(0);
-	else
-		dev = omap_device_get_by_hwmod_name(oh_name);
-
-	if (IS_ERR(dev)) {
-		pr_err("%s: Unable to get dev pointer for hwmod %s\n",
-			__func__, oh_name);
-		goto exit;
-	}
-
-	voltdm = voltdm_lookup(vdd_name);
-	if (!voltdm) {
-		pr_err("%s: unable to get vdd pointer for vdd_%s\n",
-			__func__, vdd_name);
-		goto exit;
-	}
-
-	clk =  clk_get(NULL, clk_name);
-	if (IS_ERR(clk)) {
-		pr_err("%s: unable to get clk %s\n", __func__, clk_name);
-		goto exit;
-	}
-
-	freq = clk_get_rate(clk);
-	clk_put(clk);
-
-	opp = dev_pm_opp_find_freq_ceil(dev, &freq);
-	if (IS_ERR(opp)) {
-		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
-			__func__, vdd_name);
-		goto exit;
-	}
-
-	bootup_volt = dev_pm_opp_get_voltage(opp);
-	dev_pm_opp_put(opp);
-
-	if (!bootup_volt) {
-		pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
-		       __func__, vdd_name);
-		goto exit;
-	}
-
-	voltdm_scale(voltdm, bootup_volt);
-	return 0;
-
-exit:
-	pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
-	return -EINVAL;
-}
-
 #ifdef CONFIG_SUSPEND
 static int omap_pm_enter(suspend_state_t suspend_state)
 {
@@ -211,25 +134,6 @@ void omap_common_suspend_init(void *pm_suspend)
 }
 #endif /* CONFIG_SUSPEND */
 
-static void __init omap3_init_voltages(void)
-{
-	if (!soc_is_omap34xx())
-		return;
-
-	omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
-	omap2_set_init_voltage("core", "l3_ick", "l3_main");
-}
-
-static void __init omap4_init_voltages(void)
-{
-	if (!soc_is_omap44xx())
-		return;
-
-	omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
-	omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
-	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
-}
-
 int __maybe_unused omap_pm_nop_init(void)
 {
 	return 0;
@@ -249,10 +153,6 @@ int __init omap2_common_pm_late_init(void)
 	omap4_twl_init();
 	omap_voltage_late_init();
 
-	/* Initialize the voltages */
-	omap3_init_voltages();
-	omap4_init_voltages();
-
 	/* Smartreflex device init */
 	omap_devinit_smartreflex();
 

arch/arm/xen/efi.c

@@ -31,7 +31,9 @@ void __init xen_efi_runtime_setup(void)
 	efi.get_variable             = xen_efi_get_variable;
 	efi.get_next_variable        = xen_efi_get_next_variable;
 	efi.set_variable             = xen_efi_set_variable;
+	efi.set_variable_nonblocking = xen_efi_set_variable;
 	efi.query_variable_info      = xen_efi_query_variable_info;
+	efi.query_variable_info_nonblocking = xen_efi_query_variable_info;
 	efi.update_capsule           = xen_efi_update_capsule;
 	efi.query_capsule_caps       = xen_efi_query_capsule_caps;
 	efi.get_next_high_mono_count = xen_efi_get_next_high_mono_count;

arch/arm64/kernel/cpu_errata.c

@@ -23,6 +23,7 @@
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/cpufeature.h>
+#include <asm/smp_plat.h>
 
 static bool __maybe_unused
 is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope)
@@ -618,6 +619,30 @@ check_branch_predictor(const struct arm64_cpu_capabilities *entry, int scope)
 	return (need_wa > 0);
 }
 
+static const __maybe_unused struct midr_range tx2_family_cpus[] = {
+	MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN),
+	MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2),
+	{},
+};
+
+static bool __maybe_unused
+needs_tx2_tvm_workaround(const struct arm64_cpu_capabilities *entry,
+			 int scope)
+{
+	int i;
+
+	if (!is_affected_midr_range_list(entry, scope) ||
+	    !is_hyp_mode_available())
+		return false;
+
+	for_each_possible_cpu(i) {
+		if (MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0) != 0)
+			return true;
+	}
+
+	return false;
+}
+
 #ifdef CONFIG_HARDEN_EL2_VECTORS
 
 static const struct midr_range arm64_harden_el2_vectors[] = {
@@ -842,6 +867,14 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		.matches = has_cortex_a76_erratum_1463225,
 	},
+#endif
+#ifdef CONFIG_CAVIUM_TX2_ERRATUM_219
+	{
+		.desc = "Cavium ThunderX2 erratum 219 (KVM guest sysreg trapping)",
+		.capability = ARM64_WORKAROUND_CAVIUM_TX2_219_TVM,
+		ERRATA_MIDR_RANGE_LIST(tx2_family_cpus),
+		.matches = needs_tx2_tvm_workaround,
+	},
 #endif
 	{
 	}

arch/arm64/kernel/process.c

@@ -364,22 +364,27 @@ void arch_release_task_struct(struct task_struct *tsk)
 	fpsimd_release_task(tsk);
 }
 
-/*
- * src and dst may temporarily have aliased sve_state after task_struct
- * is copied.  We cannot fix this properly here, because src may have
- * live SVE state and dst's thread_info may not exist yet, so tweaking
- * either src's or dst's TIF_SVE is not safe.
- *
- * The unaliasing is done in copy_thread() instead.  This works because
- * dst is not schedulable or traceable until both of these functions
- * have been called.
- */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
 	if (current->mm)
 		fpsimd_preserve_current_state();
 	*dst = *src;
 
+	/* We rely on the above assignment to initialize dst's thread_flags: */
+	BUILD_BUG_ON(!IS_ENABLED(CONFIG_THREAD_INFO_IN_TASK));
+
+	/*
+	 * Detach src's sve_state (if any) from dst so that it does not
+	 * get erroneously used or freed prematurely.  dst's sve_state
+	 * will be allocated on demand later on if dst uses SVE.
+	 * For consistency, also clear TIF_SVE here: this could be done
+	 * later in copy_process(), but to avoid tripping up future
+	 * maintainers it is best not to leave TIF_SVE and sve_state in
+	 * an inconsistent state, even temporarily.
+	 */
+	dst->thread.sve_state = NULL;
+	clear_tsk_thread_flag(dst, TIF_SVE);
+
 	return 0;
 }
 
@@ -392,13 +397,6 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
 
 	memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
 
-	/*
-	 * Unalias p->thread.sve_state (if any) from the parent task
-	 * and disable discard SVE state for p:
-	 */
-	clear_tsk_thread_flag(p, TIF_SVE);
-	p->thread.sve_state = NULL;
-
 	/*
 	 * In case p was allocated the same task_struct pointer as some
 	 * other recently-exited task, make sure p is disassociated from

arch/arm64/kernel/topology.c

@@ -359,17 +359,28 @@ void remove_cpu_topology(unsigned int cpu)
 }
 
 #ifdef CONFIG_ACPI
+static bool __init acpi_cpu_is_threaded(int cpu)
+{
+	int is_threaded = acpi_pptt_cpu_is_thread(cpu);
+
+	/*
+	 * if the PPTT doesn't have thread information, assume a homogeneous
+	 * machine and return the current CPU's thread state.
+	 */
+	if (is_threaded < 0)
+		is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK;
+
+	return !!is_threaded;
+}
+
 /*
  * Propagate the topology information of the processor_topology_node tree to the
  * cpu_topology array.
  */
 static int __init parse_acpi_topology(void)
 {
-	bool is_threaded;
 	int cpu, topology_id;
 
-	is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK;
-
 	for_each_possible_cpu(cpu) {
 		int i, cache_id;
 
@@ -377,7 +388,7 @@ static int __init parse_acpi_topology(void)
 		if (topology_id < 0)
 			return topology_id;
 
-		if (is_threaded) {
+		if (acpi_cpu_is_threaded(cpu)) {
 			cpu_topology[cpu].thread_id = topology_id;
 			topology_id = find_acpi_cpu_topology(cpu, 1);
 			cpu_topology[cpu].core_id   = topology_id;

arch/mips/boot/dts/qca/ar9331.dtsi

@@ -99,7 +99,7 @@
 
 			miscintc: interrupt-controller@18060010 {
 				compatible = "qca,ar7240-misc-intc";
-				reg = <0x18060010 0x4>;
+				reg = <0x18060010 0x8>;
 
 				interrupt-parent = <&cpuintc>;
 				interrupts = <6>;

arch/mips/configs/mtx1_defconfig

@@ -623,7 +623,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYPRESS_CY7C63=m

arch/mips/configs/rm200_defconfig

@@ -335,7 +335,6 @@ CONFIG_USB_SERIAL_SAFE_PADDED=y
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m

arch/mips/include/uapi/asm/hwcap.h

@@ -6,5 +6,16 @@
 #define HWCAP_MIPS_R6		(1 << 0)
 #define HWCAP_MIPS_MSA		(1 << 1)
 #define HWCAP_MIPS_CRC32	(1 << 2)
+#define HWCAP_MIPS_MIPS16	(1 << 3)
+#define HWCAP_MIPS_MDMX     (1 << 4)
+#define HWCAP_MIPS_MIPS3D   (1 << 5)
+#define HWCAP_MIPS_SMARTMIPS (1 << 6)
+#define HWCAP_MIPS_DSP      (1 << 7)
+#define HWCAP_MIPS_DSP2     (1 << 8)
+#define HWCAP_MIPS_DSP3     (1 << 9)
+#define HWCAP_MIPS_MIPS16E2 (1 << 10)
+#define HWCAP_LOONGSON_MMI  (1 << 11)
+#define HWCAP_LOONGSON_EXT  (1 << 12)
+#define HWCAP_LOONGSON_EXT2 (1 << 13)
 
 #endif /* _UAPI_ASM_HWCAP_H */

arch/mips/kernel/cpu-probe.c

@@ -2105,6 +2105,39 @@ void cpu_probe(void)
 		elf_hwcap |= HWCAP_MIPS_MSA;
 	}
 
+	if (cpu_has_mips16)
+		elf_hwcap |= HWCAP_MIPS_MIPS16;
+
+	if (cpu_has_mdmx)
+		elf_hwcap |= HWCAP_MIPS_MDMX;
+
+	if (cpu_has_mips3d)
+		elf_hwcap |= HWCAP_MIPS_MIPS3D;
+
+	if (cpu_has_smartmips)
+		elf_hwcap |= HWCAP_MIPS_SMARTMIPS;
+
+	if (cpu_has_dsp)
+		elf_hwcap |= HWCAP_MIPS_DSP;
+
+	if (cpu_has_dsp2)
+		elf_hwcap |= HWCAP_MIPS_DSP2;
+
+	if (cpu_has_dsp3)
+		elf_hwcap |= HWCAP_MIPS_DSP3;
+
+	if (cpu_has_mips16e2)
+		elf_hwcap |= HWCAP_MIPS_MIPS16E2;
+
+	if (cpu_has_loongson_mmi)
+		elf_hwcap |= HWCAP_LOONGSON_MMI;
+
+	if (cpu_has_loongson_ext)
+		elf_hwcap |= HWCAP_LOONGSON_EXT;
+
+	if (cpu_has_loongson_ext2)
+		elf_hwcap |= HWCAP_LOONGSON_EXT2;
+
 	if (cpu_has_vz)
 		cpu_probe_vz(c);
 

arch/mips/loongson64/Platform

@@ -43,6 +43,10 @@ else
       $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64)
 endif
 
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-y += $(call cc-option,-mno-loongson-mmi)
+
 #
 # Loongson Machines' Support
 #

arch/mips/loongson64/common/serial.c

@@ -110,7 +110,7 @@ static int __init serial_init(void)
 }
 module_init(serial_init);
 
-static void __init serial_exit(void)
+static void __exit serial_exit(void)
 {
 	platform_device_unregister(&uart8250_device);
 }

arch/mips/mm/tlbex.c

@@ -654,6 +654,13 @@ static void build_restore_pagemask(u32 **p, struct uasm_reloc **r,
 				   int restore_scratch)
 {
 	if (restore_scratch) {
+		/*
+		 * Ensure the MFC0 below observes the value written to the
+		 * KScratch register by the prior MTC0.
+		 */
+		if (scratch_reg >= 0)
+			uasm_i_ehb(p);
+
 		/* Reset default page size */
 		if (PM_DEFAULT_MASK >> 16) {
 			uasm_i_lui(p, tmp, PM_DEFAULT_MASK >> 16);
@@ -668,12 +675,10 @@ static void build_restore_pagemask(u32 **p, struct uasm_reloc **r,
 			uasm_i_mtc0(p, 0, C0_PAGEMASK);
 			uasm_il_b(p, r, lid);
 		}
-		if (scratch_reg >= 0) {
+		if (scratch_reg >= 0)
-			uasm_i_ehb(p);
 			UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-		} else {
+		else
 			UASM_i_LW(p, 1, scratchpad_offset(0), 0);
-		}
 	} else {
 		/* Reset default page size */
 		if (PM_DEFAULT_MASK >> 16) {
@@ -922,6 +927,10 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	}
 	if (mode != not_refill && check_for_high_segbits) {
 		uasm_l_large_segbits_fault(l, *p);
+
+		if (mode == refill_scratch && scratch_reg >= 0)
+			uasm_i_ehb(p);
+
 		/*
 		 * We get here if we are an xsseg address, or if we are
 		 * an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary.
@@ -938,12 +947,10 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		uasm_i_jr(p, ptr);
 
 		if (mode == refill_scratch) {
-			if (scratch_reg >= 0) {
+			if (scratch_reg >= 0)
-				uasm_i_ehb(p);
 				UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-			} else {
+			else
 				UASM_i_LW(p, 1, scratchpad_offset(0), 0);
-			}
 		} else {
 			uasm_i_nop(p);
 		}

arch/mips/vdso/Makefile

@@ -9,6 +9,7 @@ ccflags-vdso := \
 	$(filter -mmicromips,$(KBUILD_CFLAGS)) \
 	$(filter -march=%,$(KBUILD_CFLAGS)) \
 	$(filter -m%-float,$(KBUILD_CFLAGS)) \
+	$(filter -mno-loongson-%,$(KBUILD_CFLAGS)) \
 	-D__VDSO__
 
 ifeq ($(cc-name),clang)

arch/parisc/mm/ioremap.c

@@ -3,7 +3,7 @@
  * arch/parisc/mm/ioremap.c
  *
  * (C) Copyright 1995 1996 Linus Torvalds
- * (C) Copyright 2001-2006 Helge Deller <deller@gmx.de>
+ * (C) Copyright 2001-2019 Helge Deller <deller@gmx.de>
  * (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
  */
 
@@ -84,7 +84,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l
 	addr = (void __iomem *) area->addr;
 	if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
 			       phys_addr, pgprot)) {
-		vfree(addr);
+		vunmap(addr);
 		return NULL;
 	}
 
@@ -92,9 +92,11 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l
 }
 EXPORT_SYMBOL(__ioremap);
 
-void iounmap(const volatile void __iomem *addr)
+void iounmap(const volatile void __iomem *io_addr)
 {
-	if (addr > high_memory)
+	unsigned long addr = (unsigned long)io_addr & PAGE_MASK;
-		return vfree((void *) (PAGE_MASK & (unsigned long __force) addr));
+
+	if (is_vmalloc_addr((void *)addr))
+		vunmap((void *)addr);
 }
 EXPORT_SYMBOL(iounmap);

arch/x86/include/asm/mwait.h

@@ -21,7 +21,7 @@
 #define MWAIT_ECX_INTERRUPT_BREAK	0x1
 #define MWAITX_ECX_TIMER_ENABLE		BIT(1)
 #define MWAITX_MAX_LOOPS		((u32)-1)
-#define MWAITX_DISABLE_CSTATES		0xf
+#define MWAITX_DISABLE_CSTATES		0xf0
 
 static inline void __monitor(const void *eax, unsigned long ecx,
 			     unsigned long edx)

arch/x86/kernel/apic/x2apic_cluster.c

@@ -158,6 +158,7 @@ static int x2apic_dead_cpu(unsigned int dead_cpu)
 {
 	struct cluster_mask *cmsk = per_cpu(cluster_masks, dead_cpu);
 
+	if (cmsk)
 		cpumask_clear_cpu(dead_cpu, &cmsk->mask);
 	free_cpumask_var(per_cpu(ipi_mask, dead_cpu));
 	return 0;

arch/x86/kernel/head64.c

@@ -222,13 +222,31 @@ unsigned long __head __startup_64(unsigned long physaddr,
 	 * we might write invalid pmds, when the kernel is relocated
 	 * cleanup_highmap() fixes this up along with the mappings
 	 * beyond _end.
+	 *
+	 * Only the region occupied by the kernel image has so far
+	 * been checked against the table of usable memory regions
+	 * provided by the firmware, so invalidate pages outside that
+	 * region. A page table entry that maps to a reserved area of
+	 * memory would allow processor speculation into that area,
+	 * and on some hardware (particularly the UV platform) even
+	 * speculative access to some reserved areas is caught as an
+	 * error, causing the BIOS to halt the system.
 	 */
 
 	pmd = fixup_pointer(level2_kernel_pgt, physaddr);
-	for (i = 0; i < PTRS_PER_PMD; i++) {
+
+	/* invalidate pages before the kernel image */
+	for (i = 0; i < pmd_index((unsigned long)_text); i++)
+		pmd[i] &= ~_PAGE_PRESENT;
+
+	/* fixup pages that are part of the kernel image */
+	for (; i <= pmd_index((unsigned long)_end); i++)
 		if (pmd[i] & _PAGE_PRESENT)
 			pmd[i] += load_delta;
-	}
+
+	/* invalidate pages after the kernel image */
+	for (; i < PTRS_PER_PMD; i++)
+		pmd[i] &= ~_PAGE_PRESENT;
 
 	/*
 	 * Fixup phys_base - remove the memory encryption mask to obtain

arch/x86/lib/delay.c

@@ -113,8 +113,8 @@ static void delay_mwaitx(unsigned long __loops)
 		__monitorx(raw_cpu_ptr(&cpu_tss_rw), 0, 0);
 
 		/*
-		 * AMD, like Intel, supports the EAX hint and EAX=0xf
+		 * AMD, like Intel's MWAIT version, supports the EAX hint and
-		 * means, do not enter any deep C-state and we use it
+		 * EAX=0xf0 means, do not enter any deep C-state and we use it
 		 * here in delay() to minimize wakeup latency.
 		 */
 		__mwaitx(MWAITX_DISABLE_CSTATES, delay, MWAITX_ECX_TIMER_ENABLE);

arch/x86/xen/efi.c

@@ -77,7 +77,9 @@ static efi_system_table_t __init *xen_efi_probe(void)
 	efi.get_variable             = xen_efi_get_variable;
 	efi.get_next_variable        = xen_efi_get_next_variable;
 	efi.set_variable             = xen_efi_set_variable;
+	efi.set_variable_nonblocking = xen_efi_set_variable;
 	efi.query_variable_info      = xen_efi_query_variable_info;
+	efi.query_variable_info_nonblocking = xen_efi_query_variable_info;
 	efi.update_capsule           = xen_efi_update_capsule;
 	efi.query_capsule_caps       = xen_efi_query_capsule_caps;
 	efi.get_next_high_mono_count = xen_efi_get_next_high_mono_count;

arch/xtensa/kernel/xtensa_ksyms.c

@@ -119,13 +119,6 @@ EXPORT_SYMBOL(__invalidate_icache_range);
 // FIXME EXPORT_SYMBOL(screen_info);
 #endif
 
-EXPORT_SYMBOL(outsb);
-EXPORT_SYMBOL(outsw);
-EXPORT_SYMBOL(outsl);
-EXPORT_SYMBOL(insb);
-EXPORT_SYMBOL(insw);
-EXPORT_SYMBOL(insl);
-
 extern long common_exception_return;
 EXPORT_SYMBOL(common_exception_return);
 

block/blk-rq-qos.c

@@ -148,24 +148,27 @@ bool rq_depth_calc_max_depth(struct rq_depth *rqd)
 	return ret;
 }
 
-void rq_depth_scale_up(struct rq_depth *rqd)
+/* Returns true on success and false if scaling up wasn't possible */
+bool rq_depth_scale_up(struct rq_depth *rqd)
 {
 	/*
 	 * Hit max in previous round, stop here
 	 */
 	if (rqd->scaled_max)
-		return;
+		return false;
 
 	rqd->scale_step--;
 
 	rqd->scaled_max = rq_depth_calc_max_depth(rqd);
+	return true;
 }
 
 /*
  * Scale rwb down. If 'hard_throttle' is set, do it quicker, since we
- * had a latency violation.
+ * had a latency violation. Returns true on success and returns false if
+ * scaling down wasn't possible.
  */
-void rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle)
+bool rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle)
 {
 	/*
 	 * Stop scaling down when we've hit the limit. This also prevents
@@ -173,7 +176,7 @@ void rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle)
 	 * keep up.
 	 */
 	if (rqd->max_depth == 1)
-		return;
+		return false;
 
 	if (rqd->scale_step < 0 && hard_throttle)
 		rqd->scale_step = 0;
@@ -182,6 +185,7 @@ void rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle)
 
 	rqd->scaled_max = false;
 	rq_depth_calc_max_depth(rqd);
+	return true;
 }
 
 void rq_qos_exit(struct request_queue *q)

block/blk-rq-qos.h

@@ -80,22 +80,19 @@ static inline void rq_qos_add(struct request_queue *q, struct rq_qos *rqos)
 
 static inline void rq_qos_del(struct request_queue *q, struct rq_qos *rqos)
 {
-	struct rq_qos *cur, *prev = NULL;
+	struct rq_qos **cur;
-	for (cur = q->rq_qos; cur; cur = cur->next) {
+
-		if (cur == rqos) {
+	for (cur = &q->rq_qos; *cur; cur = &(*cur)->next) {
-			if (prev)
+		if (*cur == rqos) {
-				prev->next = rqos->next;
+			*cur = rqos->next;
-			else
-				q->rq_qos = cur;
 			break;
 		}
-		prev = cur;
 	}
 }
 
 bool rq_wait_inc_below(struct rq_wait *rq_wait, unsigned int limit);
-void rq_depth_scale_up(struct rq_depth *rqd);
+bool rq_depth_scale_up(struct rq_depth *rqd);
-void rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle);
+bool rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle);
 bool rq_depth_calc_max_depth(struct rq_depth *rqd);
 
 void rq_qos_cleanup(struct request_queue *, struct bio *);

block/blk-wbt.c

@@ -307,7 +307,8 @@ static void calc_wb_limits(struct rq_wb *rwb)
 
 static void scale_up(struct rq_wb *rwb)
 {
-	rq_depth_scale_up(&rwb->rq_depth);
+	if (!rq_depth_scale_up(&rwb->rq_depth))
+		return;
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
 	rwb_wake_all(rwb);
@@ -316,7 +317,8 @@ static void scale_up(struct rq_wb *rwb)
 
 static void scale_down(struct rq_wb *rwb, bool hard_throttle)
 {
-	rq_depth_scale_down(&rwb->rq_depth, hard_throttle);
+	if (!rq_depth_scale_down(&rwb->rq_depth, hard_throttle))
+		return;
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
 	rwb_trace_step(rwb, "scale down");

build.config.aarch64

@@ -0,0 +1,11 @@
+ARCH=arm64
+
+CLANG_TRIPLE=aarch64-linux-gnu-
+CROSS_COMPILE=aarch64-linux-androidkernel-
+LINUX_GCC_CROSS_COMPILE_PREBUILTS_BIN=prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin
+
+FILES="
+arch/arm64/boot/Image.gz
+vmlinux
+System.map
+"

build.config.common

@@ -0,0 +1,9 @@
+BRANCH=android-4.19-q
+KERNEL_DIR=common
+
+CC=clang
+CLANG_PREBUILT_BIN=prebuilts-master/clang/host/linux-x86/clang-r365631c/bin
+
+EXTRA_CMDS=''
+STOP_SHIP_TRACEPRINTK=1
+LD=ld.lld

build.config.cuttlefish.aarch64

@@ -1,18 +1,5 @@
-ARCH=arm64
+. ${ROOT_DIR}/common/build.config.common
-BRANCH=android-4.19
+. ${ROOT_DIR}/common/build.config.aarch64
-CC=clang
+
-CLANG_TRIPLE=aarch64-linux-gnu-
-CROSS_COMPILE=aarch64-linux-androidkernel-
 DEFCONFIG=cuttlefish_defconfig
-EXTRA_CMDS=''
-KERNEL_DIR=common
 POST_DEFCONFIG_CMDS="check_defconfig"
-CLANG_PREBUILT_BIN=prebuilts-master/clang/host/linux-x86/clang-r353983c/bin
-LD=ld.lld
-LINUX_GCC_CROSS_COMPILE_PREBUILTS_BIN=prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin
-FILES="
-arch/arm64/boot/Image.gz
-vmlinux
-System.map
-"
-STOP_SHIP_TRACEPRINTK=1

build.config.cuttlefish.x86_64

@@ -1,18 +1,5 @@
-ARCH=x86_64
+. ${ROOT_DIR}/common/build.config.common
-BRANCH=android-4.19
+. ${ROOT_DIR}/common/build.config.x86_64
-CC=clang
+
-CLANG_TRIPLE=x86_64-linux-gnu-
-CROSS_COMPILE=x86_64-linux-androidkernel-
 DEFCONFIG=x86_64_cuttlefish_defconfig
-EXTRA_CMDS=''
-KERNEL_DIR=common
 POST_DEFCONFIG_CMDS="check_defconfig"
-CLANG_PREBUILT_BIN=prebuilts-master/clang/host/linux-x86/clang-r353983c/bin
-LD=ld.lld
-LINUX_GCC_CROSS_COMPILE_PREBUILTS_BIN=prebuilts/gcc/linux-x86/x86/x86_64-linux-android-4.9/bin
-FILES="
-arch/x86/boot/bzImage
-vmlinux
-System.map
-"
-STOP_SHIP_TRACEPRINTK=1

build.config.x86_64

@@ -0,0 +1,11 @@
+ARCH=x86_64
+
+CLANG_TRIPLE=x86_64-linux-gnu-
+CROSS_COMPILE=x86_64-linux-androidkernel-
+LINUX_GCC_CROSS_COMPILE_PREBUILTS_BIN=prebuilts/gcc/linux-x86/x86/x86_64-linux-android-4.9/bin
+
+FILES="
+arch/x86/boot/bzImage
+vmlinux
+System.map
+"

drivers/acpi/cppc_acpi.c

@@ -909,8 +909,8 @@ void acpi_cppc_processor_exit(struct acpi_processor *pr)
 			pcc_data[pcc_ss_id]->refcount--;
 			if (!pcc_data[pcc_ss_id]->refcount) {
 				pcc_mbox_free_channel(pcc_data[pcc_ss_id]->pcc_channel);
-				pcc_data[pcc_ss_id]->pcc_channel_acquired = 0;
 				kfree(pcc_data[pcc_ss_id]);
+				pcc_data[pcc_ss_id] = NULL;
 			}
 		}
 	}

drivers/acpi/pptt.c

@@ -509,6 +509,44 @@ static int find_acpi_cpu_topology_tag(unsigned int cpu, int level, int flag)
 	return retval;
 }
 
+/**
+ * check_acpi_cpu_flag() - Determine if CPU node has a flag set
+ * @cpu: Kernel logical CPU number
+ * @rev: The minimum PPTT revision defining the flag
+ * @flag: The flag itself
+ *
+ * Check the node representing a CPU for a given flag.
+ *
+ * Return: -ENOENT if the PPTT doesn't exist, the CPU cannot be found or
+ *	   the table revision isn't new enough.
+ *	   1, any passed flag set
+ *	   0, flag unset
+ */
+static int check_acpi_cpu_flag(unsigned int cpu, int rev, u32 flag)
+{
+	struct acpi_table_header *table;
+	acpi_status status;
+	u32 acpi_cpu_id = get_acpi_id_for_cpu(cpu);
+	struct acpi_pptt_processor *cpu_node = NULL;
+	int ret = -ENOENT;
+
+	status = acpi_get_table(ACPI_SIG_PPTT, 0, &table);
+	if (ACPI_FAILURE(status)) {
+		pr_warn_once("No PPTT table found, cpu topology may be inaccurate\n");
+		return ret;
+	}
+
+	if (table->revision >= rev)
+		cpu_node = acpi_find_processor_node(table, acpi_cpu_id);
+
+	if (cpu_node)
+		ret = (cpu_node->flags & flag) != 0;
+
+	acpi_put_table(table);
+
+	return ret;
+}
+
 /**
  * acpi_find_last_cache_level() - Determines the number of cache levels for a PE
  * @cpu: Kernel logical cpu number
@@ -573,6 +611,20 @@ int cache_setup_acpi(unsigned int cpu)
 	return status;
 }
 
+/**
+ * acpi_pptt_cpu_is_thread() - Determine if CPU is a thread
+ * @cpu: Kernel logical CPU number
+ *
+ * Return: 1, a thread
+ *         0, not a thread
+ *         -ENOENT ,if the PPTT doesn't exist, the CPU cannot be found or
+ *         the table revision isn't new enough.
+ */
+int acpi_pptt_cpu_is_thread(unsigned int cpu)
+{
+	return check_acpi_cpu_flag(cpu, 2, ACPI_PPTT_ACPI_PROCESSOR_IS_THREAD);
+}
+
 /**
  * find_acpi_cpu_topology() - Determine a unique topology value for a given cpu
  * @cpu: Kernel logical cpu number

drivers/ata/ahci.c

@@ -1633,7 +1633,9 @@ static void ahci_intel_pcs_quirk(struct pci_dev *pdev, struct ahci_host_priv *hp
 	 */
 	if (!id || id->vendor != PCI_VENDOR_ID_INTEL)
 		return;
-	if (((enum board_ids) id->driver_data) < board_ahci_pcs7)
+
+	/* Skip applying the quirk on Denverton and beyond */
+	if (((enum board_ids) id->driver_data) >= board_ahci_pcs7)
 		return;
 
 	/*

drivers/base/core.c

@@ -8,6 +8,7 @@
  * Copyright (c) 2006 Novell, Inc.
  */
 
+#include <linux/cpufreq.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/fwnode.h>
@@ -2948,6 +2949,8 @@ void device_shutdown(void)
 	wait_for_device_probe();
 	device_block_probing();
 
+	cpufreq_suspend();
+
 	spin_lock(&devices_kset->list_lock);
 	/*
 	 * Walk the devices list backward, shutting down each in turn.

drivers/base/memory.c

@@ -635,6 +635,9 @@ store_soft_offline_page(struct device *dev,
 	pfn >>= PAGE_SHIFT;
 	if (!pfn_valid(pfn))
 		return -ENXIO;
+	/* Only online pages can be soft-offlined (esp., not ZONE_DEVICE). */
+	if (!pfn_to_online_page(pfn))
+		return -EIO;
 	ret = soft_offline_page(pfn_to_page(pfn), 0);
 	return ret == 0 ? count : ret;
 }

drivers/cpufreq/cpufreq.c

@@ -2620,14 +2620,6 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver)
 }
 EXPORT_SYMBOL_GPL(cpufreq_unregister_driver);
 
-/*
- * Stop cpufreq at shutdown to make sure it isn't holding any locks
- * or mutexes when secondary CPUs are halted.
- */
-static struct syscore_ops cpufreq_syscore_ops = {
-	.shutdown = cpufreq_suspend,
-};
-
 struct kobject *cpufreq_global_kobject;
 EXPORT_SYMBOL(cpufreq_global_kobject);
 
@@ -2639,8 +2631,6 @@ static int __init cpufreq_core_init(void)
 	cpufreq_global_kobject = kobject_create_and_add("cpufreq", &cpu_subsys.dev_root->kobj);
 	BUG_ON(!cpufreq_global_kobject);
 
-	register_syscore_ops(&cpufreq_syscore_ops);
-
 	return 0;
 }
 module_param(off, int, 0444);

drivers/edac/ghes_edac.c

@@ -532,7 +532,11 @@ void ghes_edac_unregister(struct ghes *ghes)
 	if (!ghes_pvt)
 		return;
 
+	if (atomic_dec_return(&ghes_init))
+		return;
+
 	mci = ghes_pvt->mci;
+	ghes_pvt = NULL;
 	edac_mc_del_mc(mci->pdev);
 	edac_mc_free(mci);
 }

drivers/firmware/efi/efi.c

@@ -281,6 +281,9 @@ static __init int efivar_ssdt_load(void)
 	void *data;
 	int ret;
 
+	if (!efivar_ssdt[0])
+		return 0;
+
 	ret = efivar_init(efivar_ssdt_iter, &entries, true, &entries);
 
 	list_for_each_entry_safe(entry, aux, &entries, list) {

drivers/firmware/google/vpd_decode.c

@@ -62,7 +62,7 @@ static int vpd_decode_entry(const u32 max_len, const u8 *input_buf,
 	if (max_len - consumed < *entry_len)
 		return VPD_FAIL;
 
-	consumed += decoded_len;
+	consumed += *entry_len;
 	*_consumed = consumed;
 	return VPD_OK;
 }

drivers/gpio/gpio-eic-sprd.c

@@ -529,11 +529,12 @@ static void sprd_eic_handle_one_type(struct gpio_chip *chip)
 		}
 
 		for_each_set_bit(n, &reg, SPRD_EIC_PER_BANK_NR) {
-			girq = irq_find_mapping(chip->irq.domain,
+			u32 offset = bank * SPRD_EIC_PER_BANK_NR + n;
-					bank * SPRD_EIC_PER_BANK_NR + n);
+
+			girq = irq_find_mapping(chip->irq.domain, offset);
 
 			generic_handle_irq(girq);
-			sprd_eic_toggle_trigger(chip, girq, n);
+			sprd_eic_toggle_trigger(chip, girq, offset);
 		}
 	}
 }

drivers/gpio/gpiolib.c

@@ -2656,8 +2656,10 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open drain by not actively driving the line high */
-		if (value)
+		if (value) {
-			return gpiod_direction_input(desc);
+			ret = gpiod_direction_input(desc);
+			goto set_output_flag;
+		}
 	}
 	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
 		ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
@@ -2665,8 +2667,10 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open source by not actively driving the line low */
-		if (!value)
+		if (!value) {
-			return gpiod_direction_input(desc);
+			ret = gpiod_direction_input(desc);
+			goto set_output_flag;
+		}
 	} else {
 		gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
 					    PIN_CONFIG_DRIVE_PUSH_PULL);
@@ -2674,6 +2678,17 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
 
 set_output_value:
 	return gpiod_direction_output_raw_commit(desc, value);
+
+set_output_flag:
+	/*
+	 * When emulating open-source or open-drain functionalities by not
+	 * actively driving the line (setting mode to input) we still need to
+	 * set the IS_OUT flag or otherwise we won't be able to set the line
+	 * value anymore.
+	 */
+	if (ret == 0)
+		set_bit(FLAG_IS_OUT, &desc->flags);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(gpiod_direction_output);
 
@@ -2987,8 +3002,6 @@ static void gpio_set_open_drain_value_commit(struct gpio_desc *desc, bool value)
 
 	if (value) {
 		err = chip->direction_input(chip, offset);
-		if (!err)
-			clear_bit(FLAG_IS_OUT, &desc->flags);
 	} else {
 		err = chip->direction_output(chip, offset, 0);
 		if (!err)
@@ -3018,8 +3031,6 @@ static void gpio_set_open_source_value_commit(struct gpio_desc *desc, bool value
 			set_bit(FLAG_IS_OUT, &desc->flags);
 	} else {
 		err = chip->direction_input(chip, offset);
-		if (!err)
-			clear_bit(FLAG_IS_OUT, &desc->flags);
 	}
 	trace_gpio_direction(desc_to_gpio(desc), !value, err);
 	if (err < 0)

drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c

@@ -841,6 +841,41 @@ static int amdgpu_pci_probe(struct pci_dev *pdev,
 	if (ret == -EPROBE_DEFER)
 		return ret;
 
+#ifdef CONFIG_DRM_AMDGPU_SI
+	if (!amdgpu_si_support) {
+		switch (flags & AMD_ASIC_MASK) {
+		case CHIP_TAHITI:
+		case CHIP_PITCAIRN:
+		case CHIP_VERDE:
+		case CHIP_OLAND:
+		case CHIP_HAINAN:
+			dev_info(&pdev->dev,
+				 "SI support provided by radeon.\n");
+			dev_info(&pdev->dev,
+				 "Use radeon.si_support=0 amdgpu.si_support=1 to override.\n"
+				);
+			return -ENODEV;
+		}
+	}
+#endif
+#ifdef CONFIG_DRM_AMDGPU_CIK
+	if (!amdgpu_cik_support) {
+		switch (flags & AMD_ASIC_MASK) {
+		case CHIP_KAVERI:
+		case CHIP_BONAIRE:
+		case CHIP_HAWAII:
+		case CHIP_KABINI:
+		case CHIP_MULLINS:
+			dev_info(&pdev->dev,
+				 "CIK support provided by radeon.\n");
+			dev_info(&pdev->dev,
+				 "Use radeon.cik_support=0 amdgpu.cik_support=1 to override.\n"
+				);
+			return -ENODEV;
+		}
+	}
+#endif
+
 	/* Get rid of things like offb */
 	ret = amdgpu_kick_out_firmware_fb(pdev);
 	if (ret)

drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c

@@ -87,41 +87,6 @@ int amdgpu_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	struct amdgpu_device *adev;
 	int r, acpi_status;
 
-#ifdef CONFIG_DRM_AMDGPU_SI
-	if (!amdgpu_si_support) {
-		switch (flags & AMD_ASIC_MASK) {
-		case CHIP_TAHITI:
-		case CHIP_PITCAIRN:
-		case CHIP_VERDE:
-		case CHIP_OLAND:
-		case CHIP_HAINAN:
-			dev_info(dev->dev,
-				 "SI support provided by radeon.\n");
-			dev_info(dev->dev,
-				 "Use radeon.si_support=0 amdgpu.si_support=1 to override.\n"
-				);
-			return -ENODEV;
-		}
-	}
-#endif
-#ifdef CONFIG_DRM_AMDGPU_CIK
-	if (!amdgpu_cik_support) {
-		switch (flags & AMD_ASIC_MASK) {
-		case CHIP_KAVERI:
-		case CHIP_BONAIRE:
-		case CHIP_HAWAII:
-		case CHIP_KABINI:
-		case CHIP_MULLINS:
-			dev_info(dev->dev,
-				 "CIK support provided by radeon.\n");
-			dev_info(dev->dev,
-				 "Use radeon.cik_support=0 amdgpu.cik_support=1 to override.\n"
-				);
-			return -ENODEV;
-		}
-	}
-#endif
-
 	adev = kzalloc(sizeof(struct amdgpu_device), GFP_KERNEL);
 	if (adev == NULL) {
 		return -ENOMEM;

drivers/gpu/drm/drm_edid.c

@@ -174,6 +174,9 @@ static const struct edid_quirk {
 	/* Medion MD 30217 PG */
 	{ "MED", 0x7b8, EDID_QUIRK_PREFER_LARGE_75 },
 
+	/* Lenovo G50 */
+	{ "SDC", 18514, EDID_QUIRK_FORCE_6BPC },
+
 	/* Panel in Samsung NP700G7A-S01PL notebook reports 6bpc */
 	{ "SEC", 0xd033, EDID_QUIRK_FORCE_8BPC },
 

drivers/gpu/drm/radeon/radeon_drv.c

@@ -395,19 +395,11 @@ radeon_pci_remove(struct pci_dev *pdev)
 static void
 radeon_pci_shutdown(struct pci_dev *pdev)
 {
-	struct drm_device *ddev = pci_get_drvdata(pdev);
-
 	/* if we are running in a VM, make sure the device
 	 * torn down properly on reboot/shutdown
 	 */
 	if (radeon_device_is_virtual())
 		radeon_pci_remove(pdev);
-
-	/* Some adapters need to be suspended before a
-	* shutdown occurs in order to prevent an error
-	* during kexec.
-	*/
-	radeon_suspend_kms(ddev, true, true, false);
 }
 
 static int radeon_pmops_suspend(struct device *dev)

drivers/gpu/drm/ttm/ttm_bo_vm.c

@@ -273,15 +273,13 @@ static vm_fault_t ttm_bo_vm_fault(struct vm_fault *vmf)
 		else
 			ret = vmf_insert_pfn(&cvma, address, pfn);
 
-		/*
+		/* Never error on prefaulted PTEs */
-		 * Somebody beat us to this PTE or prefaulting to
+		if (unlikely((ret & VM_FAULT_ERROR))) {
-		 * an already populated PTE, or prefaulting error.
+			if (i == 0)
-		 */
-
-		if (unlikely((ret == VM_FAULT_NOPAGE && i > 0)))
-			break;
-		else if (unlikely(ret & VM_FAULT_ERROR))
 				goto out_io_unlock;
+			else
+				break;
+		}
 
 		address += PAGE_SIZE;
 		if (unlikely(++page_offset >= page_last))

drivers/iio/adc/ad799x.c

@@ -814,10 +814,10 @@ static int ad799x_probe(struct i2c_client *client,
 
 	ret = ad799x_write_config(st, st->chip_config->default_config);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	ret = ad799x_read_config(st);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	st->config = ret;
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,

drivers/iio/adc/axp288_adc.c

@@ -16,6 +16,7 @@
  *
  */
 
+#include <linux/dmi.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
@@ -34,6 +35,11 @@
 #define AXP288_ADC_EN_MASK				0xF0
 #define AXP288_ADC_TS_ENABLE				0x01
 
+#define AXP288_ADC_TS_BIAS_MASK				GENMASK(5, 4)
+#define AXP288_ADC_TS_BIAS_20UA				(0 << 4)
+#define AXP288_ADC_TS_BIAS_40UA				(1 << 4)
+#define AXP288_ADC_TS_BIAS_60UA				(2 << 4)
+#define AXP288_ADC_TS_BIAS_80UA				(3 << 4)
 #define AXP288_ADC_TS_CURRENT_ON_OFF_MASK		GENMASK(1, 0)
 #define AXP288_ADC_TS_CURRENT_OFF			(0 << 0)
 #define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING		(1 << 0)
@@ -186,10 +192,36 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
+/*
+ * We rely on the machine's firmware to correctly setup the TS pin bias current
+ * at boot. This lists systems with broken fw where we need to set it ourselves.
+ */
+static const struct dmi_system_id axp288_adc_ts_bias_override[] = {
+	{
+		/* Lenovo Ideapad 100S (11 inch) */
+		.matches = {
+		  DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		  DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 100S-11IBY"),
+		},
+		.driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA,
+	},
+	{}
+};
+
 static int axp288_adc_initialize(struct axp288_adc_info *info)
 {
+	const struct dmi_system_id *bias_override;
 	int ret, adc_enable_val;
 
+	bias_override = dmi_first_match(axp288_adc_ts_bias_override);
+	if (bias_override) {
+		ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+					 AXP288_ADC_TS_BIAS_MASK,
+					 (uintptr_t)bias_override->driver_data);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * Determine if the TS pin is enabled and set the TS current-source
 	 * accordingly.

drivers/iio/adc/hx711.c

@@ -109,14 +109,14 @@ struct hx711_data {
 
 static int hx711_cycle(struct hx711_data *hx711_data)
 {
-	int val;
+	unsigned long flags;
 
 	/*
 	 * if preempted for more then 60us while PD_SCK is high:
 	 * hx711 is going in reset
 	 * ==> measuring is false
 	 */
-	preempt_disable();
+	local_irq_save(flags);
 	gpiod_set_value(hx711_data->gpiod_pd_sck, 1);
 
 	/*
@@ -126,7 +126,6 @@ static int hx711_cycle(struct hx711_data *hx711_data)
 	 */
 	ndelay(hx711_data->data_ready_delay_ns);
 
-	val = gpiod_get_value(hx711_data->gpiod_dout);
 	/*
 	 * here we are not waiting for 0.2 us as suggested by the datasheet,
 	 * because the oscilloscope showed in a test scenario
@@ -134,7 +133,7 @@ static int hx711_cycle(struct hx711_data *hx711_data)
 	 * and 0.56 us for PD_SCK low on TI Sitara with 800 MHz
 	 */
 	gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
-	preempt_enable();
+	local_irq_restore(flags);
 
 	/*
 	 * make it a square wave for addressing cases with capacitance on
@@ -142,7 +141,8 @@ static int hx711_cycle(struct hx711_data *hx711_data)
 	 */
 	ndelay(hx711_data->data_ready_delay_ns);
 
-	return val;
+	/* sample as late as possible */
+	return gpiod_get_value(hx711_data->gpiod_dout);
 }
 
 static int hx711_read(struct hx711_data *hx711_data)

drivers/iio/adc/stm32-adc-core.c

@@ -21,45 +21,22 @@
 
 #include "stm32-adc-core.h"
 
-/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
-#define STM32F4_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
-#define STM32F4_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x04)
-
-/* STM32F4_ADC_CSR - bit fields */
-#define STM32F4_EOC3			BIT(17)
-#define STM32F4_EOC2			BIT(9)
-#define STM32F4_EOC1			BIT(1)
-
-/* STM32F4_ADC_CCR - bit fields */
-#define STM32F4_ADC_ADCPRE_SHIFT	16
-#define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
-
-/* STM32H7 - common registers for all ADC instances */
-#define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
-#define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
-
-/* STM32H7_ADC_CSR - bit fields */
-#define STM32H7_EOC_SLV			BIT(18)
-#define STM32H7_EOC_MST			BIT(2)
-
-/* STM32H7_ADC_CCR - bit fields */
-#define STM32H7_PRESC_SHIFT		18
-#define STM32H7_PRESC_MASK		GENMASK(21, 18)
-#define STM32H7_CKMODE_SHIFT		16
-#define STM32H7_CKMODE_MASK		GENMASK(17, 16)
-
 /**
  * stm32_adc_common_regs - stm32 common registers, compatible dependent data
  * @csr:	common status register offset
  * @eoc1:	adc1 end of conversion flag in @csr
  * @eoc2:	adc2 end of conversion flag in @csr
  * @eoc3:	adc3 end of conversion flag in @csr
+ * @ier:	interrupt enable register offset for each adc
+ * @eocie_msk:	end of conversion interrupt enable mask in @ier
  */
 struct stm32_adc_common_regs {
 	u32 csr;
 	u32 eoc1_msk;
 	u32 eoc2_msk;
 	u32 eoc3_msk;
+	u32 ier;
+	u32 eocie_msk;
 };
 
 struct stm32_adc_priv;
@@ -268,6 +245,8 @@ static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
 	.eoc1_msk = STM32F4_EOC1,
 	.eoc2_msk = STM32F4_EOC2,
 	.eoc3_msk = STM32F4_EOC3,
+	.ier = STM32F4_ADC_CR1,
+	.eocie_msk = STM32F4_EOCIE,
 };
 
 /* STM32H7 common registers definitions */
@@ -275,8 +254,24 @@ static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
 	.csr = STM32H7_ADC_CSR,
 	.eoc1_msk = STM32H7_EOC_MST,
 	.eoc2_msk = STM32H7_EOC_SLV,
+	.ier = STM32H7_ADC_IER,
+	.eocie_msk = STM32H7_EOCIE,
 };
 
+static const unsigned int stm32_adc_offset[STM32_ADC_MAX_ADCS] = {
+	0, STM32_ADC_OFFSET, STM32_ADC_OFFSET * 2,
+};
+
+static unsigned int stm32_adc_eoc_enabled(struct stm32_adc_priv *priv,
+					  unsigned int adc)
+{
+	u32 ier, offset = stm32_adc_offset[adc];
+
+	ier = readl_relaxed(priv->common.base + offset + priv->cfg->regs->ier);
+
+	return ier & priv->cfg->regs->eocie_msk;
+}
+
 /* ADC common interrupt for all instances */
 static void stm32_adc_irq_handler(struct irq_desc *desc)
 {
@@ -287,13 +282,28 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
 	chained_irq_enter(chip, desc);
 	status = readl_relaxed(priv->common.base + priv->cfg->regs->csr);
 
-	if (status & priv->cfg->regs->eoc1_msk)
+	/*
+	 * End of conversion may be handled by using IRQ or DMA. There may be a
+	 * race here when two conversions complete at the same time on several
+	 * ADCs. EOC may be read 'set' for several ADCs, with:
+	 * - an ADC configured to use DMA (EOC triggers the DMA request, and
+	 *   is then automatically cleared by DR read in hardware)
+	 * - an ADC configured to use IRQs (EOCIE bit is set. The handler must
+	 *   be called in this case)
+	 * So both EOC status bit in CSR and EOCIE control bit must be checked
+	 * before invoking the interrupt handler (e.g. call ISR only for
+	 * IRQ-enabled ADCs).
+	 */
+	if (status & priv->cfg->regs->eoc1_msk &&
+	    stm32_adc_eoc_enabled(priv, 0))
 		generic_handle_irq(irq_find_mapping(priv->domain, 0));
 
-	if (status & priv->cfg->regs->eoc2_msk)
+	if (status & priv->cfg->regs->eoc2_msk &&
+	    stm32_adc_eoc_enabled(priv, 1))
 		generic_handle_irq(irq_find_mapping(priv->domain, 1));
 
-	if (status & priv->cfg->regs->eoc3_msk)
+	if (status & priv->cfg->regs->eoc3_msk &&
+	    stm32_adc_eoc_enabled(priv, 2))
 		generic_handle_irq(irq_find_mapping(priv->domain, 2));
 
 	chained_irq_exit(chip, desc);

drivers/iio/adc/stm32-adc-core.h

@@ -25,8 +25,145 @@
  * --------------------------------------------------------
  */
 #define STM32_ADC_MAX_ADCS		3
+#define STM32_ADC_OFFSET		0x100
 #define STM32_ADCX_COMN_OFFSET		0x300
 
+/* STM32F4 - Registers for each ADC instance */
+#define STM32F4_ADC_SR			0x00
+#define STM32F4_ADC_CR1			0x04
+#define STM32F4_ADC_CR2			0x08
+#define STM32F4_ADC_SMPR1		0x0C
+#define STM32F4_ADC_SMPR2		0x10
+#define STM32F4_ADC_HTR			0x24
+#define STM32F4_ADC_LTR			0x28
+#define STM32F4_ADC_SQR1		0x2C
+#define STM32F4_ADC_SQR2		0x30
+#define STM32F4_ADC_SQR3		0x34
+#define STM32F4_ADC_JSQR		0x38
+#define STM32F4_ADC_JDR1		0x3C
+#define STM32F4_ADC_JDR2		0x40
+#define STM32F4_ADC_JDR3		0x44
+#define STM32F4_ADC_JDR4		0x48
+#define STM32F4_ADC_DR			0x4C
+
+/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
+#define STM32F4_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
+#define STM32F4_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x04)
+
+/* STM32F4_ADC_SR - bit fields */
+#define STM32F4_STRT			BIT(4)
+#define STM32F4_EOC			BIT(1)
+
+/* STM32F4_ADC_CR1 - bit fields */
+#define STM32F4_RES_SHIFT		24
+#define STM32F4_RES_MASK		GENMASK(25, 24)
+#define STM32F4_SCAN			BIT(8)
+#define STM32F4_EOCIE			BIT(5)
+
+/* STM32F4_ADC_CR2 - bit fields */
+#define STM32F4_SWSTART			BIT(30)
+#define STM32F4_EXTEN_SHIFT		28
+#define STM32F4_EXTEN_MASK		GENMASK(29, 28)
+#define STM32F4_EXTSEL_SHIFT		24
+#define STM32F4_EXTSEL_MASK		GENMASK(27, 24)
+#define STM32F4_EOCS			BIT(10)
+#define STM32F4_DDS			BIT(9)
+#define STM32F4_DMA			BIT(8)
+#define STM32F4_ADON			BIT(0)
+
+/* STM32F4_ADC_CSR - bit fields */
+#define STM32F4_EOC3			BIT(17)
+#define STM32F4_EOC2			BIT(9)
+#define STM32F4_EOC1			BIT(1)
+
+/* STM32F4_ADC_CCR - bit fields */
+#define STM32F4_ADC_ADCPRE_SHIFT	16
+#define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
+
+/* STM32H7 - Registers for each ADC instance */
+#define STM32H7_ADC_ISR			0x00
+#define STM32H7_ADC_IER			0x04
+#define STM32H7_ADC_CR			0x08
+#define STM32H7_ADC_CFGR		0x0C
+#define STM32H7_ADC_SMPR1		0x14
+#define STM32H7_ADC_SMPR2		0x18
+#define STM32H7_ADC_PCSEL		0x1C
+#define STM32H7_ADC_SQR1		0x30
+#define STM32H7_ADC_SQR2		0x34
+#define STM32H7_ADC_SQR3		0x38
+#define STM32H7_ADC_SQR4		0x3C
+#define STM32H7_ADC_DR			0x40
+#define STM32H7_ADC_DIFSEL		0xC0
+#define STM32H7_ADC_CALFACT		0xC4
+#define STM32H7_ADC_CALFACT2		0xC8
+
+/* STM32H7 - common registers for all ADC instances */
+#define STM32H7_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
+#define STM32H7_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x08)
+
+/* STM32H7_ADC_ISR - bit fields */
+#define STM32MP1_VREGREADY		BIT(12)
+#define STM32H7_EOC			BIT(2)
+#define STM32H7_ADRDY			BIT(0)
+
+/* STM32H7_ADC_IER - bit fields */
+#define STM32H7_EOCIE			STM32H7_EOC
+
+/* STM32H7_ADC_CR - bit fields */
+#define STM32H7_ADCAL			BIT(31)
+#define STM32H7_ADCALDIF		BIT(30)
+#define STM32H7_DEEPPWD			BIT(29)
+#define STM32H7_ADVREGEN		BIT(28)
+#define STM32H7_LINCALRDYW6		BIT(27)
+#define STM32H7_LINCALRDYW5		BIT(26)
+#define STM32H7_LINCALRDYW4		BIT(25)
+#define STM32H7_LINCALRDYW3		BIT(24)
+#define STM32H7_LINCALRDYW2		BIT(23)
+#define STM32H7_LINCALRDYW1		BIT(22)
+#define STM32H7_ADCALLIN		BIT(16)
+#define STM32H7_BOOST			BIT(8)
+#define STM32H7_ADSTP			BIT(4)
+#define STM32H7_ADSTART			BIT(2)
+#define STM32H7_ADDIS			BIT(1)
+#define STM32H7_ADEN			BIT(0)
+
+/* STM32H7_ADC_CFGR bit fields */
+#define STM32H7_EXTEN_SHIFT		10
+#define STM32H7_EXTEN_MASK		GENMASK(11, 10)
+#define STM32H7_EXTSEL_SHIFT		5
+#define STM32H7_EXTSEL_MASK		GENMASK(9, 5)
+#define STM32H7_RES_SHIFT		2
+#define STM32H7_RES_MASK		GENMASK(4, 2)
+#define STM32H7_DMNGT_SHIFT		0
+#define STM32H7_DMNGT_MASK		GENMASK(1, 0)
+
+enum stm32h7_adc_dmngt {
+	STM32H7_DMNGT_DR_ONLY,		/* Regular data in DR only */
+	STM32H7_DMNGT_DMA_ONESHOT,	/* DMA one shot mode */
+	STM32H7_DMNGT_DFSDM,		/* DFSDM mode */
+	STM32H7_DMNGT_DMA_CIRC,		/* DMA circular mode */
+};
+
+/* STM32H7_ADC_CALFACT - bit fields */
+#define STM32H7_CALFACT_D_SHIFT		16
+#define STM32H7_CALFACT_D_MASK		GENMASK(26, 16)
+#define STM32H7_CALFACT_S_SHIFT		0
+#define STM32H7_CALFACT_S_MASK		GENMASK(10, 0)
+
+/* STM32H7_ADC_CALFACT2 - bit fields */
+#define STM32H7_LINCALFACT_SHIFT	0
+#define STM32H7_LINCALFACT_MASK		GENMASK(29, 0)
+
+/* STM32H7_ADC_CSR - bit fields */
+#define STM32H7_EOC_SLV			BIT(18)
+#define STM32H7_EOC_MST			BIT(2)
+
+/* STM32H7_ADC_CCR - bit fields */
+#define STM32H7_PRESC_SHIFT		18
+#define STM32H7_PRESC_MASK		GENMASK(21, 18)
+#define STM32H7_CKMODE_SHIFT		16
+#define STM32H7_CKMODE_MASK		GENMASK(17, 16)
+
 /**
  * struct stm32_adc_common - stm32 ADC driver common data (for all instances)
  * @base:		control registers base cpu addr

drivers/iio/adc/stm32-adc.c

@@ -27,115 +27,6 @@
 
 #include "stm32-adc-core.h"
 
-/* STM32F4 - Registers for each ADC instance */
-#define STM32F4_ADC_SR			0x00
-#define STM32F4_ADC_CR1			0x04
-#define STM32F4_ADC_CR2			0x08
-#define STM32F4_ADC_SMPR1		0x0C
-#define STM32F4_ADC_SMPR2		0x10
-#define STM32F4_ADC_HTR			0x24
-#define STM32F4_ADC_LTR			0x28
-#define STM32F4_ADC_SQR1		0x2C
-#define STM32F4_ADC_SQR2		0x30
-#define STM32F4_ADC_SQR3		0x34
-#define STM32F4_ADC_JSQR		0x38
-#define STM32F4_ADC_JDR1		0x3C
-#define STM32F4_ADC_JDR2		0x40
-#define STM32F4_ADC_JDR3		0x44
-#define STM32F4_ADC_JDR4		0x48
-#define STM32F4_ADC_DR			0x4C
-
-/* STM32F4_ADC_SR - bit fields */
-#define STM32F4_STRT			BIT(4)
-#define STM32F4_EOC			BIT(1)
-
-/* STM32F4_ADC_CR1 - bit fields */
-#define STM32F4_RES_SHIFT		24
-#define STM32F4_RES_MASK		GENMASK(25, 24)
-#define STM32F4_SCAN			BIT(8)
-#define STM32F4_EOCIE			BIT(5)
-
-/* STM32F4_ADC_CR2 - bit fields */
-#define STM32F4_SWSTART			BIT(30)
-#define STM32F4_EXTEN_SHIFT		28
-#define STM32F4_EXTEN_MASK		GENMASK(29, 28)
-#define STM32F4_EXTSEL_SHIFT		24
-#define STM32F4_EXTSEL_MASK		GENMASK(27, 24)
-#define STM32F4_EOCS			BIT(10)
-#define STM32F4_DDS			BIT(9)
-#define STM32F4_DMA			BIT(8)
-#define STM32F4_ADON			BIT(0)
-
-/* STM32H7 - Registers for each ADC instance */
-#define STM32H7_ADC_ISR			0x00
-#define STM32H7_ADC_IER			0x04
-#define STM32H7_ADC_CR			0x08
-#define STM32H7_ADC_CFGR		0x0C
-#define STM32H7_ADC_SMPR1		0x14
-#define STM32H7_ADC_SMPR2		0x18
-#define STM32H7_ADC_PCSEL		0x1C
-#define STM32H7_ADC_SQR1		0x30
-#define STM32H7_ADC_SQR2		0x34
-#define STM32H7_ADC_SQR3		0x38
-#define STM32H7_ADC_SQR4		0x3C
-#define STM32H7_ADC_DR			0x40
-#define STM32H7_ADC_DIFSEL		0xC0
-#define STM32H7_ADC_CALFACT		0xC4
-#define STM32H7_ADC_CALFACT2		0xC8
-
-/* STM32H7_ADC_ISR - bit fields */
-#define STM32MP1_VREGREADY		BIT(12)
-#define STM32H7_EOC			BIT(2)
-#define STM32H7_ADRDY			BIT(0)
-
-/* STM32H7_ADC_IER - bit fields */
-#define STM32H7_EOCIE			STM32H7_EOC
-
-/* STM32H7_ADC_CR - bit fields */
-#define STM32H7_ADCAL			BIT(31)
-#define STM32H7_ADCALDIF		BIT(30)
-#define STM32H7_DEEPPWD			BIT(29)
-#define STM32H7_ADVREGEN		BIT(28)
-#define STM32H7_LINCALRDYW6		BIT(27)
-#define STM32H7_LINCALRDYW5		BIT(26)
-#define STM32H7_LINCALRDYW4		BIT(25)
-#define STM32H7_LINCALRDYW3		BIT(24)
-#define STM32H7_LINCALRDYW2		BIT(23)
-#define STM32H7_LINCALRDYW1		BIT(22)
-#define STM32H7_ADCALLIN		BIT(16)
-#define STM32H7_BOOST			BIT(8)
-#define STM32H7_ADSTP			BIT(4)
-#define STM32H7_ADSTART			BIT(2)
-#define STM32H7_ADDIS			BIT(1)
-#define STM32H7_ADEN			BIT(0)
-
-/* STM32H7_ADC_CFGR bit fields */
-#define STM32H7_EXTEN_SHIFT		10
-#define STM32H7_EXTEN_MASK		GENMASK(11, 10)
-#define STM32H7_EXTSEL_SHIFT		5
-#define STM32H7_EXTSEL_MASK		GENMASK(9, 5)
-#define STM32H7_RES_SHIFT		2
-#define STM32H7_RES_MASK		GENMASK(4, 2)
-#define STM32H7_DMNGT_SHIFT		0
-#define STM32H7_DMNGT_MASK		GENMASK(1, 0)
-
-enum stm32h7_adc_dmngt {
-	STM32H7_DMNGT_DR_ONLY,		/* Regular data in DR only */
-	STM32H7_DMNGT_DMA_ONESHOT,	/* DMA one shot mode */
-	STM32H7_DMNGT_DFSDM,		/* DFSDM mode */
-	STM32H7_DMNGT_DMA_CIRC,		/* DMA circular mode */
-};
-
-/* STM32H7_ADC_CALFACT - bit fields */
-#define STM32H7_CALFACT_D_SHIFT		16
-#define STM32H7_CALFACT_D_MASK		GENMASK(26, 16)
-#define STM32H7_CALFACT_S_SHIFT		0
-#define STM32H7_CALFACT_S_MASK		GENMASK(10, 0)
-
-/* STM32H7_ADC_CALFACT2 - bit fields */
-#define STM32H7_LINCALFACT_SHIFT	0
-#define STM32H7_LINCALFACT_MASK		GENMASK(29, 0)
-
 /* Number of linear calibration shadow registers / LINCALRDYW control bits */
 #define STM32H7_LINCALFACT_NUM		6
 

drivers/iio/light/opt3001.c

@@ -694,6 +694,7 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
 	struct iio_dev *iio = _iio;
 	struct opt3001 *opt = iio_priv(iio);
 	int ret;
+	bool wake_result_ready_queue = false;
 
 	if (!opt->ok_to_ignore_lock)
 		mutex_lock(&opt->lock);
@@ -728,13 +729,16 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
 		}
 		opt->result = ret;
 		opt->result_ready = true;
-		wake_up(&opt->result_ready_queue);
+		wake_result_ready_queue = true;
 	}
 
 out:
 	if (!opt->ok_to_ignore_lock)
 		mutex_unlock(&opt->lock);
 
+	if (wake_result_ready_queue)
+		wake_up(&opt->result_ready_queue);
+
 	return IRQ_HANDLED;
 }
 

drivers/infiniband/hw/cxgb4/mem.c

@@ -274,13 +274,17 @@ static int write_tpt_entry(struct c4iw_rdev *rdev, u32 reset_tpt_entry,
 			   struct sk_buff *skb, struct c4iw_wr_wait *wr_waitp)
 {
 	int err;
-	struct fw_ri_tpte tpt;
+	struct fw_ri_tpte *tpt;
 	u32 stag_idx;
 	static atomic_t key;
 
 	if (c4iw_fatal_error(rdev))
 		return -EIO;
 
+	tpt = kmalloc(sizeof(*tpt), GFP_KERNEL);
+	if (!tpt)
+		return -ENOMEM;
+
 	stag_state = stag_state > 0;
 	stag_idx = (*stag) >> 8;
 
@@ -290,6 +294,7 @@ static int write_tpt_entry(struct c4iw_rdev *rdev, u32 reset_tpt_entry,
 			mutex_lock(&rdev->stats.lock);
 			rdev->stats.stag.fail++;
 			mutex_unlock(&rdev->stats.lock);
+			kfree(tpt);
 			return -ENOMEM;
 		}
 		mutex_lock(&rdev->stats.lock);
@@ -304,28 +309,28 @@ static int write_tpt_entry(struct c4iw_rdev *rdev, u32 reset_tpt_entry,
 
 	/* write TPT entry */
 	if (reset_tpt_entry)
-		memset(&tpt, 0, sizeof(tpt));
+		memset(tpt, 0, sizeof(*tpt));
 	else {
-		tpt.valid_to_pdid = cpu_to_be32(FW_RI_TPTE_VALID_F |
+		tpt->valid_to_pdid = cpu_to_be32(FW_RI_TPTE_VALID_F |
 			FW_RI_TPTE_STAGKEY_V((*stag & FW_RI_TPTE_STAGKEY_M)) |
 			FW_RI_TPTE_STAGSTATE_V(stag_state) |
 			FW_RI_TPTE_STAGTYPE_V(type) | FW_RI_TPTE_PDID_V(pdid));
-		tpt.locread_to_qpid = cpu_to_be32(FW_RI_TPTE_PERM_V(perm) |
+		tpt->locread_to_qpid = cpu_to_be32(FW_RI_TPTE_PERM_V(perm) |
 			(bind_enabled ? FW_RI_TPTE_MWBINDEN_F : 0) |
 			FW_RI_TPTE_ADDRTYPE_V((zbva ? FW_RI_ZERO_BASED_TO :
 						      FW_RI_VA_BASED_TO))|
 			FW_RI_TPTE_PS_V(page_size));
-		tpt.nosnoop_pbladdr = !pbl_size ? 0 : cpu_to_be32(
+		tpt->nosnoop_pbladdr = !pbl_size ? 0 : cpu_to_be32(
 			FW_RI_TPTE_PBLADDR_V(PBL_OFF(rdev, pbl_addr)>>3));
-		tpt.len_lo = cpu_to_be32((u32)(len & 0xffffffffUL));
+		tpt->len_lo = cpu_to_be32((u32)(len & 0xffffffffUL));
-		tpt.va_hi = cpu_to_be32((u32)(to >> 32));
+		tpt->va_hi = cpu_to_be32((u32)(to >> 32));
-		tpt.va_lo_fbo = cpu_to_be32((u32)(to & 0xffffffffUL));
+		tpt->va_lo_fbo = cpu_to_be32((u32)(to & 0xffffffffUL));
-		tpt.dca_mwbcnt_pstag = cpu_to_be32(0);
+		tpt->dca_mwbcnt_pstag = cpu_to_be32(0);
-		tpt.len_hi = cpu_to_be32((u32)(len >> 32));
+		tpt->len_hi = cpu_to_be32((u32)(len >> 32));
 	}
 	err = write_adapter_mem(rdev, stag_idx +
 				(rdev->lldi.vr->stag.start >> 5),
-				sizeof(tpt), &tpt, skb, wr_waitp);
+				sizeof(*tpt), tpt, skb, wr_waitp);
 
 	if (reset_tpt_entry) {
 		c4iw_put_resource(&rdev->resource.tpt_table, stag_idx);
@@ -333,6 +338,7 @@ static int write_tpt_entry(struct c4iw_rdev *rdev, u32 reset_tpt_entry,
 		rdev->stats.stag.cur -= 32;
 		mutex_unlock(&rdev->stats.lock);
 	}
+	kfree(tpt);
 	return err;
 }
 

drivers/input/misc/da9063_onkey.c

@@ -248,11 +248,8 @@ static int da9063_onkey_probe(struct platform_device *pdev)
 	onkey->input->phys = onkey->phys;
 	onkey->input->dev.parent = &pdev->dev;
 
-	if (onkey->key_power)
 	input_set_capability(onkey->input, EV_KEY, KEY_POWER);
 
-	input_set_capability(onkey->input, EV_KEY, KEY_SLEEP);
-
 	INIT_DELAYED_WORK(&onkey->work, da9063_poll_on);
 
 	error = devm_add_action(&pdev->dev, da9063_cancel_poll, onkey);

drivers/input/rmi4/rmi_driver.c

@@ -149,7 +149,7 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
 	}
 
 	mutex_lock(&data->irq_mutex);
-	bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask,
+	bitmap_and(data->irq_status, data->irq_status, data->fn_irq_bits,
 	       data->irq_count);
 	/*
 	 * At this point, irq_status has all bits that are set in the
@@ -388,6 +388,8 @@ static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev,
 	bitmap_copy(data->current_irq_mask, data->new_irq_mask,
 		    data->num_of_irq_regs);
 
+	bitmap_or(data->fn_irq_bits, data->fn_irq_bits, mask, data->irq_count);
+
 error_unlock:
 	mutex_unlock(&data->irq_mutex);
 	return error;
@@ -401,6 +403,8 @@ static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev,
 	struct device *dev = &rmi_dev->dev;
 
 	mutex_lock(&data->irq_mutex);
+	bitmap_andnot(data->fn_irq_bits,
+		      data->fn_irq_bits, mask, data->irq_count);
 	bitmap_andnot(data->new_irq_mask,
 		  data->current_irq_mask, mask, data->irq_count);
 

drivers/md/dm-cache-target.c

@@ -541,7 +541,7 @@ static void wake_migration_worker(struct cache *cache)
 
 static struct dm_bio_prison_cell_v2 *alloc_prison_cell(struct cache *cache)
 {
-	return dm_bio_prison_alloc_cell_v2(cache->prison, GFP_NOWAIT);
+	return dm_bio_prison_alloc_cell_v2(cache->prison, GFP_NOIO);
 }
 
 static void free_prison_cell(struct cache *cache, struct dm_bio_prison_cell_v2 *cell)
@@ -553,9 +553,7 @@ static struct dm_cache_migration *alloc_migration(struct cache *cache)
 {
 	struct dm_cache_migration *mg;
 
-	mg = mempool_alloc(&cache->migration_pool, GFP_NOWAIT);
+	mg = mempool_alloc(&cache->migration_pool, GFP_NOIO);
-	if (!mg)
-		return NULL;
 
 	memset(mg, 0, sizeof(*mg));
 
@@ -663,10 +661,6 @@ static bool bio_detain_shared(struct cache *cache, dm_oblock_t oblock, struct bi
 	struct dm_bio_prison_cell_v2 *cell_prealloc, *cell;
 
 	cell_prealloc = alloc_prison_cell(cache); /* FIXME: allow wait if calling from worker */
-	if (!cell_prealloc) {
-		defer_bio(cache, bio);
-		return false;
-	}
 
 	build_key(oblock, end, &key);
 	r = dm_cell_get_v2(cache->prison, &key, lock_level(bio), bio, cell_prealloc, &cell);
@@ -1492,11 +1486,6 @@ static int mg_lock_writes(struct dm_cache_migration *mg)
 	struct dm_bio_prison_cell_v2 *prealloc;
 
 	prealloc = alloc_prison_cell(cache);
-	if (!prealloc) {
-		DMERR_LIMIT("%s: alloc_prison_cell failed", cache_device_name(cache));
-		mg_complete(mg, false);
-		return -ENOMEM;
-	}
 
 	/*
 	 * Prevent writes to the block, but allow reads to continue.
@@ -1534,11 +1523,6 @@ static int mg_start(struct cache *cache, struct policy_work *op, struct bio *bio
 	}
 
 	mg = alloc_migration(cache);
-	if (!mg) {
-		policy_complete_background_work(cache->policy, op, false);
-		background_work_end(cache);
-		return -ENOMEM;
-	}
 
 	mg->op = op;
 	mg->overwrite_bio = bio;
@@ -1627,10 +1611,6 @@ static int invalidate_lock(struct dm_cache_migration *mg)
 	struct dm_bio_prison_cell_v2 *prealloc;
 
 	prealloc = alloc_prison_cell(cache);
-	if (!prealloc) {
-		invalidate_complete(mg, false);
-		return -ENOMEM;
-	}
 
 	build_key(mg->invalidate_oblock, oblock_succ(mg->invalidate_oblock), &key);
 	r = dm_cell_lock_v2(cache->prison, &key,
@@ -1668,10 +1648,6 @@ static int invalidate_start(struct cache *cache, dm_cblock_t cblock,
 		return -EPERM;
 
 	mg = alloc_migration(cache);
-	if (!mg) {
-		background_work_end(cache);
-		return -ENOMEM;
-	}
 
 	mg->overwrite_bio = bio;
 	mg->invalidate_cblock = cblock;

drivers/md/raid0.c

@@ -158,7 +158,7 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf)
 	} else {
 		pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n",
 		       mdname(mddev));
-		pr_err("md/raid0: please set raid.default_layout to 1 or 2\n");
+		pr_err("md/raid0: please set raid0.default_layout to 1 or 2\n");
 		err = -ENOTSUPP;
 		goto abort;
 	}

drivers/media/usb/stkwebcam/stk-webcam.c

@@ -641,7 +641,6 @@ static int v4l_stk_release(struct file *fp)
 		dev->owner = NULL;
 	}
 
-	if (is_present(dev))
 	usb_autopm_put_interface(dev->interface);
 	mutex_unlock(&dev->lock);
 	return v4l2_fh_release(fp);

drivers/memstick/host/jmb38x_ms.c

@@ -949,7 +949,7 @@ static int jmb38x_ms_probe(struct pci_dev *pdev,
 	if (!cnt) {
 		rc = -ENODEV;
 		pci_dev_busy = 1;
-		goto err_out;
+		goto err_out_int;
 	}
 
 	jm = kzalloc(sizeof(struct jmb38x_ms)

drivers/misc/mei/bus-fixup.c

@@ -214,13 +214,21 @@ static void mei_mkhi_fix(struct mei_cl_device *cldev)
 {
 	int ret;
 
+	/* No need to enable the client if nothing is needed from it */
+	if (!cldev->bus->fw_f_fw_ver_supported &&
+	    !cldev->bus->hbm_f_os_supported)
+		return;
+
 	ret = mei_cldev_enable(cldev);
 	if (ret)
 		return;
 
+	if (cldev->bus->fw_f_fw_ver_supported) {
 		ret = mei_fwver(cldev);
 		if (ret < 0)
-		dev_err(&cldev->dev, "FW version command failed %d\n", ret);
+			dev_err(&cldev->dev, "FW version command failed %d\n",
+				ret);
+	}
 
 	if (cldev->bus->hbm_f_os_supported) {
 		ret = mei_osver(cldev);

drivers/misc/mei/hw-me-regs.h

@@ -139,6 +139,9 @@
 #define MEI_DEV_ID_CNP_H      0xA360  /* Cannon Point H */
 #define MEI_DEV_ID_CNP_H_4    0xA364  /* Cannon Point H 4 (iTouch) */
 
+#define MEI_DEV_ID_CMP_LP     0x02e0  /* Comet Point LP */
+#define MEI_DEV_ID_CMP_LP_3   0x02e4  /* Comet Point LP 3 (iTouch) */
+
 #define MEI_DEV_ID_ICP_LP     0x34E0  /* Ice Lake Point LP */
 
 #define MEI_DEV_ID_TGP_LP     0xA0E0  /* Tiger Lake Point LP */

drivers/misc/mei/hw-me.c

@@ -1368,6 +1368,8 @@ static bool mei_me_fw_type_sps(struct pci_dev *pdev)
 #define MEI_CFG_FW_SPS                           \
 	.quirk_probe = mei_me_fw_type_sps
 
+#define MEI_CFG_FW_VER_SUPP                     \
+	.fw_ver_supported = 1
 
 #define MEI_CFG_ICH_HFS                      \
 	.fw_status.count = 0
@@ -1405,31 +1407,41 @@ static const struct mei_cfg mei_me_ich10_cfg = {
 	MEI_CFG_ICH10_HFS,
 };
 
-/* PCH devices */
+/* PCH6 devices */
-static const struct mei_cfg mei_me_pch_cfg = {
+static const struct mei_cfg mei_me_pch6_cfg = {
 	MEI_CFG_PCH_HFS,
 };
 
+/* PCH7 devices */
+static const struct mei_cfg mei_me_pch7_cfg = {
+	MEI_CFG_PCH_HFS,
+	MEI_CFG_FW_VER_SUPP,
+};
+
 /* PCH Cougar Point and Patsburg with quirk for Node Manager exclusion */
 static const struct mei_cfg mei_me_pch_cpt_pbg_cfg = {
 	MEI_CFG_PCH_HFS,
+	MEI_CFG_FW_VER_SUPP,
 	MEI_CFG_FW_NM,
 };
 
 /* PCH8 Lynx Point and newer devices */
 static const struct mei_cfg mei_me_pch8_cfg = {
 	MEI_CFG_PCH8_HFS,
+	MEI_CFG_FW_VER_SUPP,
 };
 
 /* PCH8 Lynx Point with quirk for SPS Firmware exclusion */
 static const struct mei_cfg mei_me_pch8_sps_cfg = {
 	MEI_CFG_PCH8_HFS,
+	MEI_CFG_FW_VER_SUPP,
 	MEI_CFG_FW_SPS,
 };
 
 /* Cannon Lake and newer devices */
 static const struct mei_cfg mei_me_pch12_cfg = {
 	MEI_CFG_PCH8_HFS,
+	MEI_CFG_FW_VER_SUPP,
 	MEI_CFG_DMA_128,
 };
 
@@ -1441,7 +1453,8 @@ static const struct mei_cfg *const mei_cfg_list[] = {
 	[MEI_ME_UNDEF_CFG] = NULL,
 	[MEI_ME_ICH_CFG] = &mei_me_ich_cfg,
 	[MEI_ME_ICH10_CFG] = &mei_me_ich10_cfg,
-	[MEI_ME_PCH_CFG] = &mei_me_pch_cfg,
+	[MEI_ME_PCH6_CFG] = &mei_me_pch6_cfg,
+	[MEI_ME_PCH7_CFG] = &mei_me_pch7_cfg,
 	[MEI_ME_PCH_CPT_PBG_CFG] = &mei_me_pch_cpt_pbg_cfg,
 	[MEI_ME_PCH8_CFG] = &mei_me_pch8_cfg,
 	[MEI_ME_PCH8_SPS_CFG] = &mei_me_pch8_sps_cfg,
@@ -1480,6 +1493,8 @@ struct mei_device *mei_me_dev_init(struct pci_dev *pdev,
 
 	mei_device_init(dev, &pdev->dev, &mei_me_hw_ops);
 	hw->cfg = cfg;
+	dev->fw_f_fw_ver_supported = cfg->fw_ver_supported;
+
 	return dev;
 }
 

drivers/misc/mei/hw-me.h

@@ -32,11 +32,13 @@
  * @fw_status: FW status
  * @quirk_probe: device exclusion quirk
  * @dma_size: device DMA buffers size
+ * @fw_ver_supported: is fw version retrievable from FW
  */
 struct mei_cfg {
 	const struct mei_fw_status fw_status;
 	bool (*quirk_probe)(struct pci_dev *pdev);
 	size_t dma_size[DMA_DSCR_NUM];
+	u32 fw_ver_supported:1;
 };
 
 
@@ -74,7 +76,8 @@ struct mei_me_hw {
  * @MEI_ME_UNDEF_CFG:      Lower sentinel.
  * @MEI_ME_ICH_CFG:        I/O Controller Hub legacy devices.
  * @MEI_ME_ICH10_CFG:      I/O Controller Hub platforms Gen10
- * @MEI_ME_PCH_CFG:        Platform Controller Hub platforms (Up to Gen8).
+ * @MEI_ME_PCH6_CFG:       Platform Controller Hub platforms (Gen6).
+ * @MEI_ME_PCH7_CFG:       Platform Controller Hub platforms (Gen7).
  * @MEI_ME_PCH_CPT_PBG_CFG:Platform Controller Hub workstations
  *                         with quirk for Node Manager exclusion.
  * @MEI_ME_PCH8_CFG:       Platform Controller Hub Gen8 and newer
@@ -89,7 +92,8 @@ enum mei_cfg_idx {
 	MEI_ME_UNDEF_CFG,
 	MEI_ME_ICH_CFG,
 	MEI_ME_ICH10_CFG,
-	MEI_ME_PCH_CFG,
+	MEI_ME_PCH6_CFG,
+	MEI_ME_PCH7_CFG,
 	MEI_ME_PCH_CPT_PBG_CFG,
 	MEI_ME_PCH8_CFG,
 	MEI_ME_PCH8_SPS_CFG,

drivers/misc/mei/mei_dev.h

@@ -422,6 +422,8 @@ struct mei_fw_version {
  *
  * @fw_ver : FW versions
  *
+ * @fw_f_fw_ver_supported : fw feature: fw version supported
+ *
  * @me_clients_rwsem: rw lock over me_clients list
  * @me_clients  : list of FW clients
  * @me_clients_map : FW clients bit map
@@ -500,6 +502,8 @@ struct mei_device {
 
 	struct mei_fw_version fw_ver[MEI_MAX_FW_VER_BLOCKS];
 
+	unsigned int fw_f_fw_ver_supported:1;
+
 	struct rw_semaphore me_clients_rwsem;
 	struct list_head me_clients;
 	DECLARE_BITMAP(me_clients_map, MEI_CLIENTS_MAX);

drivers/misc/mei/pci-me.c

@@ -70,13 +70,13 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_3, MEI_ME_ICH10_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_4, MEI_ME_ICH10_CFG)},
 
-	{MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_1, MEI_ME_PCH_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_1, MEI_ME_PCH6_CFG)},
-	{MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_2, MEI_ME_PCH_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_2, MEI_ME_PCH6_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CPT_1, MEI_ME_PCH_CPT_PBG_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_PBG_1, MEI_ME_PCH_CPT_PBG_CFG)},
-	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_1, MEI_ME_PCH_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_1, MEI_ME_PCH7_CFG)},
-	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_2, MEI_ME_PCH_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_2, MEI_ME_PCH7_CFG)},
-	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_3, MEI_ME_PCH_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_PPT_3, MEI_ME_PCH7_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_LPT_H, MEI_ME_PCH8_SPS_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_LPT_W, MEI_ME_PCH8_SPS_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_LPT_LP, MEI_ME_PCH8_CFG)},
@@ -105,6 +105,9 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH8_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_4, MEI_ME_PCH8_CFG)},
 
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP, MEI_ME_PCH12_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP_3, MEI_ME_PCH8_CFG)},
+
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH12_CFG)},

drivers/mmc/host/cqhci.c

@@ -721,6 +721,8 @@ static int cqhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		BUG();
 	}
 	mmc_log_string(mmc, "tag: %d\n", tag);
+	/* Make sure descriptors are ready before ringing the doorbell */
+	wmb();
 	cqhci_writel(cq_host, 1 << tag, CQHCI_TDBR);
 	/* Commit the doorbell write immediately */
 	wmb();

drivers/net/dsa/qca8k.c

@@ -543,7 +543,7 @@ qca8k_setup(struct dsa_switch *ds)
 		    BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
 
 	/* Setup connection between CPU port & user ports */
-	for (i = 0; i < DSA_MAX_PORTS; i++) {
+	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
 		/* CPU port gets connected to all user ports of the switch */
 		if (dsa_is_cpu_port(ds, i)) {
 			qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
@@ -897,7 +897,7 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 	if (id != QCA8K_ID_QCA8337)
 		return -ENODEV;
 
-	priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS);
+	priv->ds = dsa_switch_alloc(&mdiodev->dev, QCA8K_NUM_PORTS);
 	if (!priv->ds)
 		return -ENOMEM;
 

drivers/net/dsa/rtl8366rb.c

@@ -507,7 +507,8 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 	irq = of_irq_get(intc, 0);
 	if (irq <= 0) {
 		dev_err(smi->dev, "failed to get parent IRQ\n");
-		return irq ? irq : -EINVAL;
+		ret = irq ? irq : -EINVAL;
+		goto out_put_node;
 	}
 
 	/* This clears the IRQ status register */
@@ -515,7 +516,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 			  &val);
 	if (ret) {
 		dev_err(smi->dev, "can't read interrupt status\n");
-		return ret;
+		goto out_put_node;
 	}
 
 	/* Fetch IRQ edge information from the descriptor */
@@ -537,7 +538,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 				 val);
 	if (ret) {
 		dev_err(smi->dev, "could not configure IRQ polarity\n");
-		return ret;
+		goto out_put_node;
 	}
 
 	ret = devm_request_threaded_irq(smi->dev, irq, NULL,
@@ -545,7 +546,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 					"RTL8366RB", smi);
 	if (ret) {
 		dev_err(smi->dev, "unable to request irq: %d\n", ret);
-		return ret;
+		goto out_put_node;
 	}
 	smi->irqdomain = irq_domain_add_linear(intc,
 					       RTL8366RB_NUM_INTERRUPT,
@@ -553,12 +554,15 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 					       smi);
 	if (!smi->irqdomain) {
 		dev_err(smi->dev, "failed to create IRQ domain\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_put_node;
 	}
 	for (i = 0; i < smi->num_ports; i++)
 		irq_set_parent(irq_create_mapping(smi->irqdomain, i), irq);
 
-	return 0;
+out_put_node:
+	of_node_put(intc);
+	return ret;
 }
 
 static int rtl8366rb_set_addr(struct realtek_smi *smi)

drivers/net/ethernet/broadcom/genet/bcmgenet.h

@@ -369,6 +369,7 @@ struct bcmgenet_mib_counters {
 #define  EXT_PWR_DOWN_PHY_EN		(1 << 20)
 
 #define EXT_RGMII_OOB_CTRL		0x0C
+#define  RGMII_MODE_EN_V123		(1 << 0)
 #define  RGMII_LINK			(1 << 4)
 #define  OOB_DISABLE			(1 << 5)
 #define  RGMII_MODE_EN			(1 << 6)

drivers/net/ethernet/broadcom/genet/bcmmii.c

@@ -261,7 +261,11 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
 	 */
 	if (priv->ext_phy) {
 		reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
-		reg |= RGMII_MODE_EN | id_mode_dis;
+		reg |= id_mode_dis;
+		if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv))
+			reg |= RGMII_MODE_EN_V123;
+		else
+			reg |= RGMII_MODE_EN;
 		bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
 	}
 
@@ -276,10 +280,11 @@ int bcmgenet_mii_probe(struct net_device *dev)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct device_node *dn = priv->pdev->dev.of_node;
 	struct phy_device *phydev;
-	u32 phy_flags;
+	u32 phy_flags = 0;
 	int ret;
 
 	/* Communicate the integrated PHY revision */
+	if (priv->internal_phy)
 		phy_flags = priv->gphy_rev;
 
 	/* Initialize link state variables that bcmgenet_mii_setup() uses */

drivers/net/ethernet/hisilicon/hns_mdio.c

@@ -156,11 +156,15 @@ static int mdio_sc_cfg_reg_write(struct hns_mdio_device *mdio_dev,
 {
 	u32 time_cnt;
 	u32 reg_value;
+	int ret;
 
 	regmap_write(mdio_dev->subctrl_vbase, cfg_reg, set_val);
 
 	for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) {
-		regmap_read(mdio_dev->subctrl_vbase, st_reg, &reg_value);
+		ret = regmap_read(mdio_dev->subctrl_vbase, st_reg, &reg_value);
+		if (ret)
+			return ret;
+
 		reg_value &= st_msk;
 		if ((!!check_st) == (!!reg_value))
 			break;

drivers/net/ethernet/i825xx/lasi_82596.c

@@ -96,6 +96,8 @@
 
 #define OPT_SWAP_PORT	0x0001	/* Need to wordswp on the MPU port */
 
+#define LIB82596_DMA_ATTR	DMA_ATTR_NON_CONSISTENT
+
 #define DMA_WBACK(ndev, addr, len) \
 	do { dma_cache_sync((ndev)->dev.parent, (void *)addr, len, DMA_TO_DEVICE); } while (0)
 
@@ -199,7 +201,7 @@ static int __exit lan_remove_chip(struct parisc_device *pdev)
 
 	unregister_netdev (dev);
 	dma_free_attrs(&pdev->dev, sizeof(struct i596_private), lp->dma,
-		       lp->dma_addr, DMA_ATTR_NON_CONSISTENT);
+		       lp->dma_addr, LIB82596_DMA_ATTR);
 	free_netdev (dev);
 	return 0;
 }

drivers/net/ethernet/i825xx/lib82596.c

@@ -1065,7 +1065,7 @@ static int i82596_probe(struct net_device *dev)
 
 	dma = dma_alloc_attrs(dev->dev.parent, sizeof(struct i596_dma),
 			      &lp->dma_addr, GFP_KERNEL,
-			      DMA_ATTR_NON_CONSISTENT);
+			      LIB82596_DMA_ATTR);
 	if (!dma) {
 		printk(KERN_ERR "%s: Couldn't get shared memory\n", __FILE__);
 		return -ENOMEM;
@@ -1087,7 +1087,7 @@ static int i82596_probe(struct net_device *dev)
 	i = register_netdev(dev);
 	if (i) {
 		dma_free_attrs(dev->dev.parent, sizeof(struct i596_dma),
-			       dma, lp->dma_addr, DMA_ATTR_NON_CONSISTENT);
+			       dma, lp->dma_addr, LIB82596_DMA_ATTR);
 		return i;
 	}
 

drivers/net/ethernet/i825xx/sni_82596.c

@@ -23,6 +23,8 @@
 
 static const char sni_82596_string[] = "snirm_82596";
 
+#define LIB82596_DMA_ATTR	0
+
 #define DMA_WBACK(priv, addr, len)     do { } while (0)
 #define DMA_INV(priv, addr, len)       do { } while (0)
 #define DMA_WBACK_INV(priv, addr, len) do { } while (0)
@@ -151,7 +153,7 @@ static int sni_82596_driver_remove(struct platform_device *pdev)
 
 	unregister_netdev(dev);
 	dma_free_attrs(dev->dev.parent, sizeof(struct i596_private), lp->dma,
-		       lp->dma_addr, DMA_ATTR_NON_CONSISTENT);
+		       lp->dma_addr, LIB82596_DMA_ATTR);
 	iounmap(lp->ca);
 	iounmap(lp->mpu_port);
 	free_netdev (dev);

drivers/net/ethernet/ibm/ibmvnic.c

@@ -2731,12 +2731,10 @@ static int enable_scrq_irq(struct ibmvnic_adapter *adapter,
 
 	if (adapter->resetting &&
 	    adapter->reset_reason == VNIC_RESET_MOBILITY) {
-		u64 val = (0xff000000) | scrq->hw_irq;
+		struct irq_desc *desc = irq_to_desc(scrq->irq);
+		struct irq_chip *chip = irq_desc_get_chip(desc);
 
-		rc = plpar_hcall_norets(H_EOI, val);
+		chip->irq_eoi(&desc->irq_data);
-		if (rc)
-			dev_err(dev, "H_EOI FAILED irq 0x%llx. rc=%ld\n",
-				val, rc);
 	}
 
 	rc = plpar_hcall_norets(H_VIOCTL, adapter->vdev->unit_address,

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -4522,8 +4522,10 @@ int stmmac_suspend(struct device *dev)
 		stmmac_mac_set(priv, priv->ioaddr, false);
 		pinctrl_pm_select_sleep_state(priv->device);
 		/* Disable clock in case of PWM is off */
-		clk_disable(priv->plat->pclk);
+		if (priv->plat->clk_ptp_ref)
-		clk_disable(priv->plat->stmmac_clk);
+			clk_disable_unprepare(priv->plat->clk_ptp_ref);
+		clk_disable_unprepare(priv->plat->pclk);
+		clk_disable_unprepare(priv->plat->stmmac_clk);
 	}
 	mutex_unlock(&priv->lock);
 
@@ -4588,8 +4590,10 @@ int stmmac_resume(struct device *dev)
 	} else {
 		pinctrl_pm_select_default_state(priv->device);
 		/* enable the clk previously disabled */
-		clk_enable(priv->plat->stmmac_clk);
+		clk_prepare_enable(priv->plat->stmmac_clk);
-		clk_enable(priv->plat->pclk);
+		clk_prepare_enable(priv->plat->pclk);
+		if (priv->plat->clk_ptp_ref)
+			clk_prepare_enable(priv->plat->clk_ptp_ref);
 		/* reset the phy so that it's ready */
 		if (priv->mii)
 			stmmac_mdio_reset(priv->mii);

drivers/net/ieee802154/ca8210.c

@@ -3151,12 +3151,12 @@ static int ca8210_probe(struct spi_device *spi_device)
 		goto error;
 	}
 
+	priv->spi->dev.platform_data = pdata;
 	ret = ca8210_get_platform_data(priv->spi, pdata);
 	if (ret) {
 		dev_crit(&spi_device->dev, "ca8210_get_platform_data failed\n");
 		goto error;
 	}
-	priv->spi->dev.platform_data = pdata;
 
 	ret = ca8210_dev_com_init(priv);
 	if (ret) {

drivers/net/usb/r8152.c

@@ -4474,10 +4474,9 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
 	struct r8152 *tp = usb_get_intfdata(intf);
 
 	clear_bit(SELECTIVE_SUSPEND, &tp->flags);
-	mutex_lock(&tp->control);
 	tp->rtl_ops.init(tp);
 	queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
-	mutex_unlock(&tp->control);
+	set_ethernet_addr(tp);
 	return rtl8152_resume(intf);
 }
 

drivers/net/wireless/realtek/rtlwifi/ps.c

@@ -775,6 +775,9 @@ static void rtl_p2p_noa_ie(struct ieee80211_hw *hw, void *data,
 				return;
 			} else {
 				noa_num = (noa_len - 2) / 13;
+				if (noa_num > P2P_MAX_NOA_NUM)
+					noa_num = P2P_MAX_NOA_NUM;
+
 			}
 			noa_index = ie[3];
 			if (rtlpriv->psc.p2p_ps_info.p2p_ps_mode ==
@@ -869,6 +872,9 @@ static void rtl_p2p_action_ie(struct ieee80211_hw *hw, void *data,
 				return;
 			} else {
 				noa_num = (noa_len - 2) / 13;
+				if (noa_num > P2P_MAX_NOA_NUM)
+					noa_num = P2P_MAX_NOA_NUM;
+
 			}
 			noa_index = ie[3];
 			if (rtlpriv->psc.p2p_ps_info.p2p_ps_mode ==

drivers/net/xen-netback/interface.c

@@ -718,7 +718,6 @@ int xenvif_connect_data(struct xenvif_queue *queue,
 	xenvif_unmap_frontend_data_rings(queue);
 	netif_napi_del(&queue->napi);
 err:
-	module_put(THIS_MODULE);
 	return err;
 }
 

drivers/nvme/host/core.c

@@ -111,10 +111,13 @@ static void nvme_set_queue_dying(struct nvme_ns *ns)
 	 */
 	if (!ns->disk || test_and_set_bit(NVME_NS_DEAD, &ns->flags))
 		return;
-	revalidate_disk(ns->disk);
 	blk_set_queue_dying(ns->queue);
 	/* Forcibly unquiesce queues to avoid blocking dispatch */
 	blk_mq_unquiesce_queue(ns->queue);
+	/*
+	 * Revalidate after unblocking dispatchers that may be holding bd_butex
+	 */
+	revalidate_disk(ns->disk);
 }
 
 static void nvme_queue_scan(struct nvme_ctrl *ctrl)

drivers/pci/controller/vmd.c

@@ -97,6 +97,7 @@ struct vmd_dev {
 	struct resource		resources[3];
 	struct irq_domain	*irq_domain;
 	struct pci_bus		*bus;
+	u8			busn_start;
 
 #ifdef CONFIG_X86_DEV_DMA_OPS
 	struct dma_map_ops	dma_ops;
@@ -468,7 +469,8 @@ static char __iomem *vmd_cfg_addr(struct vmd_dev *vmd, struct pci_bus *bus,
 				  unsigned int devfn, int reg, int len)
 {
 	char __iomem *addr = vmd->cfgbar +
-			     (bus->number << 20) + (devfn << 12) + reg;
+			     ((bus->number - vmd->busn_start) << 20) +
+			     (devfn << 12) + reg;
 
 	if ((addr - vmd->cfgbar) + len >=
 	    resource_size(&vmd->dev->resource[VMD_CFGBAR]))
@@ -591,7 +593,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 	unsigned long flags;
 	LIST_HEAD(resources);
 	resource_size_t offset[2] = {0};
-	resource_size_t membar2_offset = 0x2000, busn_start = 0;
+	resource_size_t membar2_offset = 0x2000;
 
 	/*
 	 * Shadow registers may exist in certain VMD device ids which allow
@@ -633,14 +635,14 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 		pci_read_config_dword(vmd->dev, PCI_REG_VMCONFIG, &vmconfig);
 		if (BUS_RESTRICT_CAP(vmcap) &&
 		    (BUS_RESTRICT_CFG(vmconfig) == 0x1))
-			busn_start = 128;
+			vmd->busn_start = 128;
 	}
 
 	res = &vmd->dev->resource[VMD_CFGBAR];
 	vmd->resources[0] = (struct resource) {
 		.name  = "VMD CFGBAR",
-		.start = busn_start,
+		.start = vmd->busn_start,
-		.end   = busn_start + (resource_size(res) >> 20) - 1,
+		.end   = vmd->busn_start + (resource_size(res) >> 20) - 1,
 		.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
 	};
 
@@ -708,8 +710,8 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 	pci_add_resource_offset(&resources, &vmd->resources[1], offset[0]);
 	pci_add_resource_offset(&resources, &vmd->resources[2], offset[1]);
 
-	vmd->bus = pci_create_root_bus(&vmd->dev->dev, busn_start, &vmd_ops,
+	vmd->bus = pci_create_root_bus(&vmd->dev->dev, vmd->busn_start,
-				       sd, &resources);
+					&vmd_ops, sd, &resources);
 	if (!vmd->bus) {
 		pci_free_resource_list(&resources);
 		irq_domain_remove(vmd->irq_domain);

drivers/pci/pci.c

@@ -925,19 +925,6 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
 	}
 }
 
-/**
- * pci_power_up - Put the given device into D0 forcibly
- * @dev: PCI device to power up
- */
-void pci_power_up(struct pci_dev *dev)
-{
-	if (platform_pci_power_manageable(dev))
-		platform_pci_set_power_state(dev, PCI_D0);
-
-	pci_raw_set_power_state(dev, PCI_D0);
-	pci_update_current_state(dev, PCI_D0);
-}
-
 /**
  * pci_platform_power_transition - Use platform to change device power state
  * @dev: PCI device to handle.
@@ -1116,6 +1103,17 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 }
 EXPORT_SYMBOL(pci_set_power_state);
 
+/**
+ * pci_power_up - Put the given device into D0 forcibly
+ * @dev: PCI device to power up
+ */
+void pci_power_up(struct pci_dev *dev)
+{
+	__pci_start_power_transition(dev, PCI_D0);
+	pci_raw_set_power_state(dev, PCI_D0);
+	pci_update_current_state(dev, PCI_D0);
+}
+
 /**
  * pci_choose_state - Choose the power state of a PCI device
  * @dev: PCI device to be suspended

drivers/pinctrl/intel/pinctrl-cherryview.c

@@ -1524,7 +1524,6 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
 			DMI_MATCH(DMI_PRODUCT_FAMILY, "Intel_Strago"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
 		},
 	},
 	{
@@ -1532,7 +1531,6 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Setzer"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
 		},
 	},
 	{
@@ -1540,7 +1538,6 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Cyan"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
 		},
 	},
 	{
@@ -1548,7 +1545,6 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Celes"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
 		},
 	},
 	{}

drivers/pinctrl/mvebu/pinctrl-armada-37xx.c

@@ -183,10 +183,10 @@ static struct armada_37xx_pin_group armada_37xx_nb_groups[] = {
 	PIN_GRP_EXTRA("uart2", 9, 2, BIT(1) | BIT(13) | BIT(14) | BIT(19),
 		      BIT(1) | BIT(13) | BIT(14), BIT(1) | BIT(19),
 		      18, 2, "gpio", "uart"),
-	PIN_GRP_GPIO("led0_od", 11, 1, BIT(20), "led"),
+	PIN_GRP_GPIO_2("led0_od", 11, 1, BIT(20), BIT(20), 0, "led"),
-	PIN_GRP_GPIO("led1_od", 12, 1, BIT(21), "led"),
+	PIN_GRP_GPIO_2("led1_od", 12, 1, BIT(21), BIT(21), 0, "led"),
-	PIN_GRP_GPIO("led2_od", 13, 1, BIT(22), "led"),
+	PIN_GRP_GPIO_2("led2_od", 13, 1, BIT(22), BIT(22), 0, "led"),
-	PIN_GRP_GPIO("led3_od", 14, 1, BIT(23), "led"),
+	PIN_GRP_GPIO_2("led3_od", 14, 1, BIT(23), BIT(23), 0, "led"),
 
 };
 
@@ -218,11 +218,11 @@ static const struct armada_37xx_pin_data armada_37xx_pin_sb = {
 };
 
 static inline void armada_37xx_update_reg(unsigned int *reg,
-					  unsigned int offset)
+					  unsigned int *offset)
 {
 	/* We never have more than 2 registers */
-	if (offset >= GPIO_PER_REG) {
+	if (*offset >= GPIO_PER_REG) {
-		offset -= GPIO_PER_REG;
+		*offset -= GPIO_PER_REG;
 		*reg += sizeof(u32);
 	}
 }
@@ -373,7 +373,7 @@ static inline void armada_37xx_irq_update_reg(unsigned int *reg,
 {
 	int offset = irqd_to_hwirq(d);
 
-	armada_37xx_update_reg(reg, offset);
+	armada_37xx_update_reg(reg, &offset);
 }
 
 static int armada_37xx_gpio_direction_input(struct gpio_chip *chip,
@@ -383,7 +383,7 @@ static int armada_37xx_gpio_direction_input(struct gpio_chip *chip,
 	unsigned int reg = OUTPUT_EN;
 	unsigned int mask;
 
-	armada_37xx_update_reg(&reg, offset);
+	armada_37xx_update_reg(&reg, &offset);
 	mask = BIT(offset);
 
 	return regmap_update_bits(info->regmap, reg, mask, 0);
@@ -396,7 +396,7 @@ static int armada_37xx_gpio_get_direction(struct gpio_chip *chip,
 	unsigned int reg = OUTPUT_EN;
 	unsigned int val, mask;
 
-	armada_37xx_update_reg(&reg, offset);
+	armada_37xx_update_reg(&reg, &offset);
 	mask = BIT(offset);
 	regmap_read(info->regmap, reg, &val);
 
@@ -410,7 +410,7 @@ static int armada_37xx_gpio_direction_output(struct gpio_chip *chip,
 	unsigned int reg = OUTPUT_EN;
 	unsigned int mask, val, ret;
 
-	armada_37xx_update_reg(&reg, offset);
+	armada_37xx_update_reg(&reg, &offset);
 	mask = BIT(offset);
 
 	ret = regmap_update_bits(info->regmap, reg, mask, mask);
@@ -431,7 +431,7 @@ static int armada_37xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	unsigned int reg = INPUT_VAL;
 	unsigned int val, mask;
 
-	armada_37xx_update_reg(&reg, offset);
+	armada_37xx_update_reg(&reg, &offset);
 	mask = BIT(offset);
 
 	regmap_read(info->regmap, reg, &val);
@@ -446,7 +446,7 @@ static void armada_37xx_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	unsigned int reg = OUTPUT_VAL;
 	unsigned int mask, val;
 
-	armada_37xx_update_reg(&reg, offset);
+	armada_37xx_update_reg(&reg, &offset);
 	mask = BIT(offset);
 	val = value ? mask : 0;
 

drivers/s390/scsi/zfcp_fsf.c

@@ -21,6 +21,11 @@
 
 struct kmem_cache *zfcp_fsf_qtcb_cache;
 
+static bool ber_stop = true;
+module_param(ber_stop, bool, 0600);
+MODULE_PARM_DESC(ber_stop,
+		 "Shuts down FCP devices for FCP channels that report a bit-error count in excess of its threshold (default on)");
+
 static void zfcp_fsf_request_timeout_handler(struct timer_list *t)
 {
 	struct zfcp_fsf_req *fsf_req = from_timer(fsf_req, t, timer);
@@ -230,10 +235,15 @@ static void zfcp_fsf_status_read_handler(struct zfcp_fsf_req *req)
 	case FSF_STATUS_READ_SENSE_DATA_AVAIL:
 		break;
 	case FSF_STATUS_READ_BIT_ERROR_THRESHOLD:
-		dev_warn(&adapter->ccw_device->dev,
-			 "The error threshold for checksum statistics "
-			 "has been exceeded\n");
 		zfcp_dbf_hba_bit_err("fssrh_3", req);
+		if (ber_stop) {
+			dev_warn(&adapter->ccw_device->dev,
+				 "All paths over this FCP device are disused because of excessive bit errors\n");
+			zfcp_erp_adapter_shutdown(adapter, 0, "fssrh_b");
+		} else {
+			dev_warn(&adapter->ccw_device->dev,
+				 "The error threshold for checksum statistics has been exceeded\n");
+		}
 		break;
 	case FSF_STATUS_READ_LINK_DOWN:
 		zfcp_fsf_status_read_link_down(req);

drivers/scsi/ch.c

@@ -578,7 +578,6 @@ ch_release(struct inode *inode, struct file *file)
 	scsi_changer *ch = file->private_data;
 
 	scsi_device_put(ch->device);
-	ch->device = NULL;
 	file->private_data = NULL;
 	kref_put(&ch->ref, ch_destroy);
 	return 0;

drivers/scsi/megaraid.c

@@ -4189,11 +4189,11 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		 */
 		if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ &&
 		    pdev->subsystem_device == 0xC000)
-		   	return -ENODEV;
+			goto out_disable_device;
 		/* Now check the magic signature byte */
 		pci_read_config_word(pdev, PCI_CONF_AMISIG, &magic);
 		if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE)
-			return -ENODEV;
+			goto out_disable_device;
 		/* Ok it is probably a megaraid */
 	}
 

drivers/scsi/qla2xxx/qla_target.c

@@ -1023,6 +1023,7 @@ void qlt_free_session_done(struct work_struct *work)
 
 	if (logout_started) {
 		bool traced = false;
+		u16 cnt = 0;
 
 		while (!READ_ONCE(sess->logout_completed)) {
 			if (!traced) {
@@ -1032,6 +1033,9 @@ void qlt_free_session_done(struct work_struct *work)
 				traced = true;
 			}
 			msleep(100);
+			cnt++;
+			if (cnt > 200)
+				break;
 		}
 
 		ql_dbg(ql_dbg_disc, vha, 0xf087,

drivers/scsi/scsi_error.c

@@ -970,6 +970,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
 	ses->sdb = scmd->sdb;
 	ses->next_rq = scmd->request->next_rq;
 	ses->result = scmd->result;
+	ses->resid_len = scmd->req.resid_len;
 	ses->underflow = scmd->underflow;
 	ses->prot_op = scmd->prot_op;
 	ses->eh_eflags = scmd->eh_eflags;
@@ -981,6 +982,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
 	memset(&scmd->sdb, 0, sizeof(scmd->sdb));
 	scmd->request->next_rq = NULL;
 	scmd->result = 0;
+	scmd->req.resid_len = 0;
 
 	if (sense_bytes) {
 		scmd->sdb.length = min_t(unsigned, SCSI_SENSE_BUFFERSIZE,
@@ -1034,6 +1036,7 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
 	scmd->sdb = ses->sdb;
 	scmd->request->next_rq = ses->next_rq;
 	scmd->result = ses->result;
+	scmd->req.resid_len = ses->resid_len;
 	scmd->underflow = ses->underflow;
 	scmd->prot_op = ses->prot_op;
 	scmd->eh_eflags = ses->eh_eflags;