From 04720ea2e6c64459a90ca28570ea78335eccd924 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Mon, 12 Feb 2024 13:58:33 +0100 Subject: [PATCH 01/78] batman-adv: Avoid infinite loop trying to resize local TT commit b1f532a3b1e6d2e5559c7ace49322922637a28aa upstream. If the MTU of one of an attached interface becomes too small to transmit the local translation table then it must be resized to fit inside all fragments (when enabled) or a single packet. But if the MTU becomes too low to transmit even the header + the VLAN specific part then the resizing of the local TT will never succeed. This can for example happen when the usable space is 110 bytes and 11 VLANs are on top of batman-adv. In this case, at least 116 byte would be needed. There will just be an endless spam of batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110) in the log but the function will never finish. Problem here is that the timeout will be halved all the time and will then stagnate at 0 and therefore never be able to reduce the table even more. There are other scenarios possible with a similar result. The number of BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too high to fit inside a packet. Such a scenario can therefore happen also with only a single VLAN + 7 non-purgable addresses - requiring at least 120 bytes. While this should be handled proactively when: * interface with too low MTU is added * VLAN is added * non-purgeable local mac is added * MTU of an attached interface is reduced * fragmentation setting gets disabled (which most likely requires dropping attached interfaces) not all of these scenarios can be prevented because batman-adv is only consuming events without the the possibility to prevent these actions (non-purgable MAC address added, MTU of an attached interface is reduced). It is therefore necessary to also make sure that the code is able to handle also the situations when there were already incompatible system configuration are present. Cc: stable@vger.kernel.org Fixes: a19d3d85e1b8 ("batman-adv: limit local translation table max size") Reported-by: syzbot+a6a4b5bb3da165594cff@syzkaller.appspotmail.com Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Greg Kroah-Hartman --- net/batman-adv/translation-table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index c64d58c1b724..1b30f6b08a61 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -4198,7 +4198,7 @@ void batadv_tt_local_resize_to_mtu(struct net_device *soft_iface) spin_lock_bh(&bat_priv->tt.commit_lock); - while (true) { + while (timeout) { table_size = batadv_tt_local_table_transmit_size(bat_priv); if (packet_size_max >= table_size) break; From 89a32741f4217856066c198a4a7267bcdd1edd67 Mon Sep 17 00:00:00 2001 From: Dmitry Antipov Date: Tue, 2 Apr 2024 14:32:05 +0300 Subject: [PATCH 02/78] Bluetooth: Fix memory leak in hci_req_sync_complete() commit 45d355a926ab40f3ae7bc0b0a00cb0e3e8a5a810 upstream. In 'hci_req_sync_complete()', always free the previous sync request state before assigning reference to a new one. Reported-by: syzbot+39ec16ff6cc18b1d066d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=39ec16ff6cc18b1d066d Cc: stable@vger.kernel.org Fixes: f60cb30579d3 ("Bluetooth: Convert hci_req_sync family of function to new request API") Signed-off-by: Dmitry Antipov Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman --- net/bluetooth/hci_request.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c index 76bd6b122724..6b9082c3ccc9 100644 --- a/net/bluetooth/hci_request.c +++ b/net/bluetooth/hci_request.c @@ -107,8 +107,10 @@ static void hci_req_sync_complete(struct hci_dev *hdev, u8 result, u16 opcode, if (hdev->req_status == HCI_REQ_PEND) { hdev->req_result = result; hdev->req_status = HCI_REQ_DONE; - if (skb) + if (skb) { + kfree_skb(hdev->req_skb); hdev->req_skb = skb_get(skb); + } wake_up_interruptible(&hdev->req_wait_q); } } From 7b30bcac7f8bd82dcb9ee61d04926d286060a19f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 4 Apr 2024 18:02:25 +0200 Subject: [PATCH 03/78] nouveau: fix function cast warning [ Upstream commit 185fdb4697cc9684a02f2fab0530ecdd0c2f15d4 ] Calling a function through an incompatible pointer type causes breaks kcfi, so clang warns about the assignment: drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c:73:10: error: cast from 'void (*)(const void *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 73 | .fini = (void(*)(void *))kfree, Avoid this with a trivial wrapper. Fixes: c39f472e9f14 ("drm/nouveau: remove symlinks, move core/ to nvkm/ (no code changes)") Signed-off-by: Arnd Bergmann Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20240404160234.2923554-1-arnd@kernel.org Signed-off-by: Sasha Levin --- drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c index 4bf486b57101..cb05f7f48a98 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c @@ -66,11 +66,16 @@ of_init(struct nvkm_bios *bios, const char *name) return ERR_PTR(-EINVAL); } +static void of_fini(void *p) +{ + kfree(p); +} + const struct nvbios_source nvbios_of = { .name = "OpenFirmware", .init = of_init, - .fini = (void(*)(void *))kfree, + .fini = of_fini, .read = of_read, .size = of_size, .rw = false, From 43be590456e1f3566054ce78ae2dbb68cbe1a536 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 5 Apr 2024 10:30:34 +0000 Subject: [PATCH 04/78] geneve: fix header validation in geneve[6]_xmit_skb [ Upstream commit d8a6213d70accb403b82924a1c229e733433a5ef ] syzbot is able to trigger an uninit-value in geneve_xmit() [1] Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield()) uses skb_protocol(skb, true), pskb_inet_may_pull() is only using skb->protocol. If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol, pskb_inet_may_pull() does nothing at all. If a vlan tag was provided by the caller (af_packet in the syzbot case), the network header might not point to the correct location, and skb linear part could be smaller than expected. Add skb_vlan_inet_prepare() to perform a complete mac validation. Use this in geneve for the moment, I suspect we need to adopt this more broadly. v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest - Only call __vlan_get_protocol() for vlan types. Link: https://lore.kernel.org/netdev/20240404100035.3270a7d5@kernel.org/ v2,v3 - Addressed Sabrina comments on v1 and v2 Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/ [1] BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline] BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 geneve_xmit_skb drivers/net/geneve.c:910 [inline] geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335 dev_queue_xmit include/linux/netdevice.h:3091 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Fixes: d13f048dd40e ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb") Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/ Signed-off-by: Eric Dumazet Cc: Phillip Potter Cc: Sabrina Dubroca Reviewed-by: Sabrina Dubroca Reviewed-by: Phillip Potter Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/geneve.c | 4 ++-- include/net/ip_tunnels.h | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+), 2 deletions(-) diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 8aa04b37c5fe..d25879c1657d 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -852,7 +852,7 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev, __be16 df; int err; - if (!pskb_inet_may_pull(skb)) + if (!skb_vlan_inet_prepare(skb)) return -EINVAL; sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true); @@ -898,7 +898,7 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev, __be16 sport; int err; - if (!pskb_inet_may_pull(skb)) + if (!skb_vlan_inet_prepare(skb)) return -EINVAL; sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true); diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h index bc2ae8ce5bd4..570287d3564b 100644 --- a/include/net/ip_tunnels.h +++ b/include/net/ip_tunnels.h @@ -346,6 +346,39 @@ static inline bool pskb_inet_may_pull(struct sk_buff *skb) return pskb_network_may_pull(skb, nhlen); } +/* Variant of pskb_inet_may_pull(). + */ +static inline bool skb_vlan_inet_prepare(struct sk_buff *skb) +{ + int nhlen = 0, maclen = ETH_HLEN; + __be16 type = skb->protocol; + + /* Essentially this is skb_protocol(skb, true) + * And we get MAC len. + */ + if (eth_type_vlan(type)) + type = __vlan_get_protocol(skb, type, &maclen); + + switch (type) { +#if IS_ENABLED(CONFIG_IPV6) + case htons(ETH_P_IPV6): + nhlen = sizeof(struct ipv6hdr); + break; +#endif + case htons(ETH_P_IP): + nhlen = sizeof(struct iphdr); + break; + } + /* For ETH_P_IPV6/ETH_P_IP we make sure to pull + * a base network header in skb->head. + */ + if (!pskb_may_pull(skb, maclen + nhlen)) + return false; + + skb_set_network_header(skb, maclen); + return true; +} + static inline int ip_encap_hlen(struct ip_tunnel_encap *e) { const struct ip_tunnel_encap_ops *ops; From 3e2c1fbbb372005e98ac75a239ca02da3ef9ba5b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 8 Apr 2024 09:42:02 +0200 Subject: [PATCH 05/78] ipv6: fib: hide unused 'pn' variable [ Upstream commit 74043489fcb5e5ca4074133582b5b8011b67f9e7 ] When CONFIG_IPV6_SUBTREES is disabled, the only user is hidden, causing a 'make W=1' warning: net/ipv6/ip6_fib.c: In function 'fib6_add': net/ipv6/ip6_fib.c:1388:32: error: variable 'pn' set but not used [-Werror=unused-but-set-variable] Add another #ifdef around the variable declaration, matching the other uses in this file. Fixes: 66729e18df08 ("[IPV6] ROUTE: Make sure we have fn->leaf when adding a node on subtree.") Link: https://lore.kernel.org/netdev/20240322131746.904943-1-arnd@kernel.org/ Reviewed-by: David Ahern Signed-off-by: Arnd Bergmann Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240408074219.3030256-1-arnd@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- net/ipv6/ip6_fib.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 63fb9e01eb4e..844a5ee7f76f 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -1226,7 +1226,10 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt, struct nl_info *info, struct netlink_ext_ack *extack) { struct fib6_table *table = rt->fib6_table; - struct fib6_node *fn, *pn = NULL; + struct fib6_node *fn; +#ifdef CONFIG_IPV6_SUBTREES + struct fib6_node *pn = NULL; +#endif int err = -ENOMEM; int allow_create = 1; int replace_required = 0; @@ -1251,9 +1254,9 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt, goto out; } +#ifdef CONFIG_IPV6_SUBTREES pn = fn; -#ifdef CONFIG_IPV6_SUBTREES if (rt->fib6_src.plen) { struct fib6_node *sn; From 0b48182b06f631781987c38be150d76b0f483923 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 8 Apr 2024 09:42:03 +0200 Subject: [PATCH 06/78] ipv4/route: avoid unused-but-set-variable warning [ Upstream commit cf1b7201df59fb936f40f4a807433fe3f2ce310a ] The log_martians variable is only used in an #ifdef, causing a 'make W=1' warning with gcc: net/ipv4/route.c: In function 'ip_rt_send_redirect': net/ipv4/route.c:880:13: error: variable 'log_martians' set but not used [-Werror=unused-but-set-variable] Change the #ifdef to an equivalent IS_ENABLED() to let the compiler see where the variable is used. Fixes: 30038fc61adf ("net: ip_rt_send_redirect() optimization") Reviewed-by: David Ahern Signed-off-by: Arnd Bergmann Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240408074219.3030256-2-arnd@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- net/ipv4/route.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index f4d41ceef946..301460510535 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -937,13 +937,11 @@ void ip_rt_send_redirect(struct sk_buff *skb) icmp_send(skb, ICMP_REDIRECT, ICMP_REDIR_HOST, gw); peer->rate_last = jiffies; ++peer->n_redirects; -#ifdef CONFIG_IP_ROUTE_VERBOSE - if (log_martians && + if (IS_ENABLED(CONFIG_IP_ROUTE_VERBOSE) && log_martians && peer->n_redirects == ip_rt_redirect_number) net_warn_ratelimited("host %pI4/if%d ignores redirects for %pI4 to %pI4\n", &ip_hdr(skb)->saddr, inet_iif(skb), &ip_hdr(skb)->daddr, &gw); -#endif } out_put_peer: inet_putpeer(peer); From b4b3b69a19016d4e7fbdbd1dbcc184915eb862e1 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Mon, 8 Apr 2024 16:18:21 +0200 Subject: [PATCH 07/78] ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr [ Upstream commit 7633c4da919ad51164acbf1aa322cc1a3ead6129 ] Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it still means hlist_for_each_entry_rcu can return an item that got removed from the list. The memory itself of such item is not freed thanks to RCU but nothing guarantees the actual content of the memory is sane. In particular, the reference count can be zero. This can happen if ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough timing, this can happen: 1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry. 2. Then, the whole ipv6_del_addr is executed for the given entry. The reference count drops to zero and kfree_rcu is scheduled. 3. ipv6_get_ifaddr continues and tries to increments the reference count (in6_ifa_hold). 4. The rcu is unlocked and the entry is freed. 5. The freed entry is returned. Prevent increasing of the reference count in such case. The name in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe. [ 41.506330] refcount_t: addition on 0; use-after-free. [ 41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130 [ 41.507413] Modules linked in: veth bridge stp llc [ 41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be82afa #14 [ 41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [ 41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130 [ 41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 <0f> 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff [ 41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282 [ 41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000 [ 41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900 [ 41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff [ 41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000 [ 41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48 [ 41.514086] FS: 00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000 [ 41.514726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0 [ 41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.516799] Call Trace: [ 41.517037] [ 41.517249] ? __warn+0x7b/0x120 [ 41.517535] ? refcount_warn_saturate+0xa5/0x130 [ 41.517923] ? report_bug+0x164/0x190 [ 41.518240] ? handle_bug+0x3d/0x70 [ 41.518541] ? exc_invalid_op+0x17/0x70 [ 41.520972] ? asm_exc_invalid_op+0x1a/0x20 [ 41.521325] ? refcount_warn_saturate+0xa5/0x130 [ 41.521708] ipv6_get_ifaddr+0xda/0xe0 [ 41.522035] inet6_rtm_getaddr+0x342/0x3f0 [ 41.522376] ? __pfx_inet6_rtm_getaddr+0x10/0x10 [ 41.522758] rtnetlink_rcv_msg+0x334/0x3d0 [ 41.523102] ? netlink_unicast+0x30f/0x390 [ 41.523445] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 41.523832] netlink_rcv_skb+0x53/0x100 [ 41.524157] netlink_unicast+0x23b/0x390 [ 41.524484] netlink_sendmsg+0x1f2/0x440 [ 41.524826] __sys_sendto+0x1d8/0x1f0 [ 41.525145] __x64_sys_sendto+0x1f/0x30 [ 41.525467] do_syscall_64+0xa5/0x1b0 [ 41.525794] entry_SYSCALL_64_after_hwframe+0x72/0x7a [ 41.526213] RIP: 0033:0x7fbc4cfcea9a [ 41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 41.527942] RSP: 002b:00007ffcf54012a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 41.528593] RAX: ffffffffffffffda RBX: 00007ffcf5401368 RCX: 00007fbc4cfcea9a [ 41.529173] RDX: 000000000000002c RSI: 00007fbc4b9d9bd0 RDI: 0000000000000005 [ 41.529786] RBP: 00007fbc4bafb040 R08: 00007ffcf54013e0 R09: 000000000000000c [ 41.530375] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 41.530977] R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007fbc4ca85d1b [ 41.531573] Fixes: 5c578aedcb21d ("IPv6: convert addrconf hash list to RCU") Reviewed-by: Eric Dumazet Reviewed-by: David Ahern Signed-off-by: Jiri Benc Link: https://lore.kernel.org/r/8ab821e36073a4a406c50ec83c9e8dc586c539e4.1712585809.git.jbenc@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- include/net/addrconf.h | 4 ++++ net/ipv6/addrconf.c | 7 ++++--- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 9583d3bbab03..10d270f004f0 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -443,6 +443,10 @@ static inline void in6_ifa_hold(struct inet6_ifaddr *ifp) refcount_inc(&ifp->refcnt); } +static inline bool in6_ifa_hold_safe(struct inet6_ifaddr *ifp) +{ + return refcount_inc_not_zero(&ifp->refcnt); +} /* * compute link-local solicited-node multicast address diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 5ffa8777ab09..cadc424c1a71 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1965,9 +1965,10 @@ struct inet6_ifaddr *ipv6_get_ifaddr(struct net *net, const struct in6_addr *add if (ipv6_addr_equal(&ifp->addr, addr)) { if (!dev || ifp->idev->dev == dev || !(ifp->scope&(IFA_LINK|IFA_HOST) || strict)) { - result = ifp; - in6_ifa_hold(ifp); - break; + if (in6_ifa_hold_safe(ifp)) { + result = ifp; + break; + } } } } From de0139719cdda82806a47580ca0df06fc85e0bd2 Mon Sep 17 00:00:00 2001 From: Cosmin Ratiu Date: Tue, 9 Apr 2024 22:08:12 +0300 Subject: [PATCH 08/78] net/mlx5: Properly link new fs rules into the tree [ Upstream commit 7c6782ad4911cbee874e85630226ed389ff2e453 ] Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a subsequent step during the same handle creation references it again, resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL. This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1]. This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle. Fixes: 74491de93712 ("net/mlx5: Add multi dest support") Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Signed-off-by: Cosmin Ratiu Reviewed-by: Tariq Toukan Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index f0aa7f0e5480..d2b8d284b199 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1452,8 +1452,9 @@ static struct mlx5_flow_handle *add_rule_fg(struct mlx5_flow_group *fg, } trace_mlx5_fs_set_fte(fte, false); + /* Link newly added rules into the tree. */ for (i = 0; i < handle->num_rules; i++) { - if (refcount_read(&handle->rule[i]->node.refcount) == 1) { + if (!handle->rule[i]->node.parent) { tree_add_node(&handle->rule[i]->node, &fte->node); trace_mlx5_fs_add_rule(handle->rule[i]); } From 8bfa576fe3c6df875a16f3eb27f7ec3fdd7f3168 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 3 Apr 2024 10:06:24 +0200 Subject: [PATCH 09/78] tracing: hide unused ftrace_event_id_fops MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 5281ec83454d70d98b71f1836fb16512566c01cd ] When CONFIG_PERF_EVENTS, a 'make W=1' build produces a warning about the unused ftrace_event_id_fops variable: kernel/trace/trace_events.c:2155:37: error: 'ftrace_event_id_fops' defined but not used [-Werror=unused-const-variable=] 2155 | static const struct file_operations ftrace_event_id_fops = { Hide this in the same #ifdef as the reference to it. Link: https://lore.kernel.org/linux-trace-kernel/20240403080702.3509288-7-arnd@kernel.org Cc: Masami Hiramatsu Cc: Oleg Nesterov Cc: Mathieu Desnoyers Cc: Zheng Yejian Cc: Kees Cook Cc: Ajay Kaher Cc: Jinjie Ruan Cc: Clément Léger Cc: Dan Carpenter Cc: "Tzvetomir Stoyanov (VMware)" Fixes: 620a30e97feb ("tracing: Don't pass file_operations array to event_create_dir()") Signed-off-by: Arnd Bergmann Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin --- kernel/trace/trace_events.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index ed39d3ec202e..2830a9cbe648 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -1309,6 +1309,7 @@ static int trace_format_open(struct inode *inode, struct file *file) return 0; } +#ifdef CONFIG_PERF_EVENTS static ssize_t event_id_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos) { @@ -1323,6 +1324,7 @@ event_id_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos) return simple_read_from_buffer(ubuf, cnt, ppos, buf, len); } +#endif static ssize_t event_filter_read(struct file *filp, char __user *ubuf, size_t cnt, @@ -1727,10 +1729,12 @@ static const struct file_operations ftrace_event_format_fops = { .release = seq_release, }; +#ifdef CONFIG_PERF_EVENTS static const struct file_operations ftrace_event_id_fops = { .read = event_id_read, .llseek = default_llseek, }; +#endif static const struct file_operations ftrace_event_filter_fops = { .open = tracing_open_generic, From 60bb8b451c6a9dc993c876e1f2abf188f9bc97c1 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Thu, 28 Mar 2024 10:21:47 +1000 Subject: [PATCH 10/78] vhost: Add smp_rmb() in vhost_vq_avail_empty() commit 22e1992cf7b034db5325660e98c41ca5afa5f519 upstream. A smp_rmb() has been missed in vhost_vq_avail_empty(), spotted by Will. Otherwise, it's not ensured the available ring entries pushed by guest can be observed by vhost in time, leading to stale available ring entries fetched by vhost in vhost_get_vq_desc(), as reported by Yihuang Yu on NVidia's grace-hopper (ARM64) platform. /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \ -accel kvm -machine virt,gic-version=host -cpu host \ -smp maxcpus=1,cpus=1,sockets=1,clusters=1,cores=1,threads=1 \ -m 4096M,slots=16,maxmem=64G \ -object memory-backend-ram,id=mem0,size=4096M \ : \ -netdev tap,id=vnet0,vhost=true \ -device virtio-net-pci,bus=pcie.8,netdev=vnet0,mac=52:54:00:f1:26:b0 : guest# netperf -H 10.26.1.81 -l 60 -C -c -t UDP_STREAM virtio_net virtio0: output.0:id 100 is not a head! Add the missed smp_rmb() in vhost_vq_avail_empty(). When tx_can_batch() returns true, it means there's still pending tx buffers. Since it might read indices, so it still can bypass the smp_rmb() in vhost_get_vq_desc(). Note that it should be safe until vq->avail_idx is changed by commit 275bf960ac697 ("vhost: better detection of available buffers"). Fixes: 275bf960ac69 ("vhost: better detection of available buffers") Cc: # v4.11+ Reported-by: Yihuang Yu Suggested-by: Will Deacon Signed-off-by: Gavin Shan Acked-by: Jason Wang Message-Id: <20240328002149.1141302-2-gshan@redhat.com> Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefano Garzarella Signed-off-by: Greg Kroah-Hartman --- drivers/vhost/vhost.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 3321333a1186..45c5b35355f6 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -2426,9 +2426,19 @@ bool vhost_vq_avail_empty(struct vhost_dev *dev, struct vhost_virtqueue *vq) r = vhost_get_avail(vq, avail_idx, &vq->avail->idx); if (unlikely(r)) return false; - vq->avail_idx = vhost16_to_cpu(vq, avail_idx); - return vq->avail_idx == vq->last_avail_idx; + vq->avail_idx = vhost16_to_cpu(vq, avail_idx); + if (vq->avail_idx != vq->last_avail_idx) { + /* Since we have updated avail_idx, the following + * call to vhost_get_vq_desc() will read available + * ring entries. Make sure that read happens after + * the avail_idx read. + */ + smp_rmb(); + return false; + } + + return true; } EXPORT_SYMBOL_GPL(vhost_vq_avail_empty); From 3004d8f3f9ddb7c43b4af98203c8bb9a31bf8b51 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 10 Apr 2024 16:26:30 -0700 Subject: [PATCH 11/78] selftests: timers: Fix abs() warning in posix_timers test commit ed366de8ec89d4f960d66c85fc37d9de22f7bf6d upstream. Building with clang results in the following warning: posix_timers.c:69:6: warning: absolute value function 'abs' given an argument of type 'long long' but has parameter of type 'int' which may cause truncation of value [-Wabsolute-value] if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) { ^ So switch to using llabs() instead. Fixes: 0bc4b0cf1570 ("selftests: add basic posix timers selftests") Signed-off-by: John Stultz Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410232637.4135564-3-jstultz@google.com Signed-off-by: Greg Kroah-Hartman --- tools/testing/selftests/timers/posix_timers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/timers/posix_timers.c b/tools/testing/selftests/timers/posix_timers.c index 15cf56d32155..0fab100220d1 100644 --- a/tools/testing/selftests/timers/posix_timers.c +++ b/tools/testing/selftests/timers/posix_timers.c @@ -67,7 +67,7 @@ static int check_diff(struct timeval start, struct timeval end) diff = end.tv_usec - start.tv_usec; diff += (end.tv_sec - start.tv_sec) * USECS_PER_SEC; - if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) { + if (llabs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) { printf("Diff too high: %lld..", diff); return -1; } From 38ecf8d8a293c9677a4659ede4810ecacb06dcda Mon Sep 17 00:00:00 2001 From: Adam Dunlap Date: Mon, 18 Mar 2024 16:09:27 -0700 Subject: [PATCH 12/78] x86/apic: Force native_apic_mem_read() to use the MOV instruction commit 5ce344beaca688f4cdea07045e0b8f03dc537e74 upstream. When done from a virtual machine, instructions that touch APIC memory must be emulated. By convention, MMIO accesses are typically performed via io.h helpers such as readl() or writeq() to simplify instruction emulation/decoding (ex: in KVM hosts and SEV guests) [0]. Currently, native_apic_mem_read() does not follow this convention, allowing the compiler to emit instructions other than the MOV instruction generated by readl(). In particular, when the kernel is compiled with clang and run as a SEV-ES or SEV-SNP guest, the compiler would emit a TESTL instruction which is not supported by the SEV-ES emulator, causing a boot failure in that environment. It is likely the same problem would happen in a TDX guest as that uses the same instruction emulator as SEV-ES. To make sure all emulators can emulate APIC memory reads via MOV, use the readl() function in native_apic_mem_read(). It is expected that any emulator would support MOV in any addressing mode as it is the most generic and is what is usually emitted currently. The TESTL instruction is emitted when native_apic_mem_read() is inlined into apic_mem_wait_icr_idle(). The emulator comes from insn_decode_mmio() in arch/x86/lib/insn-eval.c. It's not worth it to extend insn_decode_mmio() to support more instructions since, in theory, the compiler could choose to output nearly any instruction for such reads which would bloat the emulator beyond reason. [0] https://lore.kernel.org/all/20220405232939.73860-12-kirill.shutemov@linux.intel.com/ [ bp: Massage commit message, fix typos. ] Signed-off-by: Adam Dunlap Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Thomas Gleixner Reviewed-by: Ard Biesheuvel Tested-by: Kevin Loughlin Cc: Link: https://lore.kernel.org/r/20240318230927.2191933-1-acdunlap@google.com Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/apic.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 163c2af44a44..c3340bfab0dd 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -11,6 +11,7 @@ #include #include #include +#include #define ARCH_APICTIMER_STOPS_ON_C3 1 @@ -110,7 +111,7 @@ static inline void native_apic_mem_write(u32 reg, u32 v) static inline u32 native_apic_mem_read(u32 reg) { - return *((volatile u32 *)(APIC_BASE + reg)); + return readl((void __iomem *)(APIC_BASE + reg)); } extern void native_apic_wait_icr_idle(void); From f9392292ff4c01b092c12d1bfdae5471496cca1e Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Thu, 21 Mar 2024 10:14:24 -0700 Subject: [PATCH 13/78] btrfs: record delayed inode root in transaction [ Upstream commit 71537e35c324ea6fbd68377a4f26bb93a831ae35 ] When running delayed inode updates, we do not record the inode's root in the transaction, but we do allocate PREALLOC and thus converted PERTRANS space for it. To be sure we free that PERTRANS meta rsv, we must ensure that we record the root in the transaction. Fixes: 4f5427ccce5d ("btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Signed-off-by: David Sterba Signed-off-by: Sasha Levin --- fs/btrfs/delayed-inode.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 469a90b07d3f..fec62782fc86 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -1133,6 +1133,9 @@ __btrfs_commit_inode_delayed_items(struct btrfs_trans_handle *trans, if (ret) return ret; + ret = btrfs_record_root_in_trans(trans, node->root); + if (ret) + return ret; ret = btrfs_update_delayed_inode(trans, node->root, path, node); return ret; } From 0a8b2a0410e7fdcd899e58015d025004808559f6 Mon Sep 17 00:00:00 2001 From: Yuanhe Shu Date: Mon, 26 Feb 2024 11:18:16 +0800 Subject: [PATCH 14/78] selftests/ftrace: Limit length in subsystem-enable tests commit 1a4ea83a6e67f1415a1f17c1af5e9c814c882bb5 upstream. While sched* events being traced and sched* events continuously happen, "[xx] event tracing - enable/disable with subsystem level files" would not stop as on some slower systems it seems to take forever. Select the first 100 lines of output would be enough to judge whether there are more than 3 types of sched events. Fixes: 815b18ea66d6 ("ftracetest: Add basic event tracing test cases") Cc: stable@vger.kernel.org Signed-off-by: Yuanhe Shu Acked-by: Masami Hiramatsu (Google) Acked-by: Steven Rostedt (Google) Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- .../selftests/ftrace/test.d/event/subsystem-enable.tc | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc index 6a37a8642ee6..87eb9147f3d5 100644 --- a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc +++ b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc @@ -30,7 +30,7 @@ echo 'sched:*' > set_event yield -count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` +count=`head -n 100 trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` if [ $count -lt 3 ]; then fail "at least fork, exec and exit events should be recorded" fi @@ -41,7 +41,7 @@ echo 1 > events/sched/enable yield -count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` +count=`head -n 100 trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` if [ $count -lt 3 ]; then fail "at least fork, exec and exit events should be recorded" fi @@ -52,7 +52,7 @@ echo 0 > events/sched/enable yield -count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` +count=`head -n 100 trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` if [ $count -ne 0 ]; then fail "any of scheduler events should not be recorded" fi From b5808d40093403334d939e2c3c417144d12a6f33 Mon Sep 17 00:00:00 2001 From: Zheng Yejian Date: Wed, 10 Apr 2024 09:58:02 +0800 Subject: [PATCH 15/78] kprobes: Fix possible use-after-free issue on kprobe registration commit 325f3fb551f8cd672dbbfc4cf58b14f9ee3fc9e8 upstream. When unloading a module, its state is changing MODULE_STATE_LIVE -> MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take a time. `is_module_text_address()` and `__module_text_address()` works with MODULE_STATE_LIVE and MODULE_STATE_GOING. If we use `is_module_text_address()` and `__module_text_address()` separately, there is a chance that the first one is succeeded but the next one is failed because module->state becomes MODULE_STATE_UNFORMED between those operations. In `check_kprobe_address_safe()`, if the second `__module_text_address()` is failed, that is ignored because it expected a kernel_text address. But it may have failed simply because module->state has been changed to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify non-exist module text address (use-after-free). To fix this problem, we should not use separated `is_module_text_address()` and `__module_text_address()`, but use only `__module_text_address()` once and do `try_module_get(module)` which is only available with MODULE_STATE_LIVE. Link: https://lore.kernel.org/all/20240410015802.265220-1-zhengyejian1@huawei.com/ Fixes: 28f6c37a2910 ("kprobes: Forbid probing on trampoline and BPF code areas") Cc: stable@vger.kernel.org Signed-off-by: Zheng Yejian Signed-off-by: Masami Hiramatsu (Google) [Fix conflict due to lack dependency commit 223a76b268c9 ("kprobes: Fix coding style issues")] Signed-off-by: Zheng Yejian Signed-off-by: Greg Kroah-Hartman --- kernel/kprobes.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/kernel/kprobes.c b/kernel/kprobes.c index e1fb6453e8e9..d61fda614199 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -1565,10 +1565,17 @@ static int check_kprobe_address_safe(struct kprobe *p, jump_label_lock(); preempt_disable(); - /* Ensure it is not in reserved area nor out of text */ - if (!(core_kernel_text((unsigned long) p->addr) || - is_module_text_address((unsigned long) p->addr)) || - in_gate_area_no_mm((unsigned long) p->addr) || + /* Ensure the address is in a text area, and find a module if exists. */ + *probed_mod = NULL; + if (!core_kernel_text((unsigned long) p->addr)) { + *probed_mod = __module_text_address((unsigned long) p->addr); + if (!(*probed_mod)) { + ret = -EINVAL; + goto out; + } + } + /* Ensure it is not in reserved area. */ + if (in_gate_area_no_mm((unsigned long) p->addr) || within_kprobe_blacklist((unsigned long) p->addr) || jump_label_text_reserved(p->addr, p->addr) || find_bug((unsigned long)p->addr)) { @@ -1576,8 +1583,7 @@ static int check_kprobe_address_safe(struct kprobe *p, goto out; } - /* Check if are we probing a module */ - *probed_mod = __module_text_address((unsigned long) p->addr); + /* Get module refcount and reject __init functions for loaded modules. */ if (*probed_mod) { /* * We must hold a refcount of the probed module while updating From 34925d01baf3ee62ab21c21efd9e2c44c24c004a Mon Sep 17 00:00:00 2001 From: Siddh Raman Pant Date: Thu, 18 Apr 2024 18:58:06 +0530 Subject: [PATCH 16/78] Revert "tracing/trigger: Fix to return error if failed to alloc snapshot" This reverts commit bcf4a115a5068f3331fafb8c176c1af0da3d8b19 which is commit 0958b33ef5a04ed91f61cef4760ac412080c4e08 upstream. The change has an incorrect assumption about the return value because in the current stable trees for versions 5.15 and before, the following commit responsible for making 0 a success value is not present: b8cc44a4d3c1 ("tracing: Remove logic for registering multiple event triggers at a time") The return value should be 0 on failure in the current tree, because in the functions event_trigger_callback() and event_enable_trigger_func(), we have: ret = cmd_ops->reg(glob, trigger_ops, trigger_data, file); /* * The above returns on success the # of functions enabled, * but if it didn't find any functions it returns zero. * Consider no functions a failure too. */ if (!ret) { ret = -ENOENT; Cc: stable@kernel.org # 5.15, 5.10, 5.4, 4.19 Signed-off-by: Siddh Raman Pant Signed-off-by: Greg Kroah-Hartman --- kernel/trace/trace_events_trigger.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index 8cb4ddb88601..4b0bde304ad7 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -1133,10 +1133,8 @@ register_snapshot_trigger(char *glob, struct event_trigger_ops *ops, struct event_trigger_data *data, struct trace_event_file *file) { - int ret = tracing_alloc_snapshot_instance(file->tr); - - if (ret < 0) - return ret; + if (tracing_alloc_snapshot_instance(file->tr) != 0) + return 0; return register_trigger(glob, ops, data, file); } From 97f097a8091261ffa07c8889550c4026e59b6c14 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 5 Jul 2019 22:59:05 +0200 Subject: [PATCH 17/78] netfilter: nf_tables: __nft_expr_type_get() selects specific family type [ Upstream commit 9cff126f73a7025bcb0883189b2bed90010a57d4 ] In case that there are two types, prefer the family specify extension. Signed-off-by: Pablo Neira Ayuso Stable-dep-of: f969eb84ce48 ("netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get()") Signed-off-by: Sasha Levin --- net/netfilter/nf_tables_api.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index dc40222a9e66..79d0545badca 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2081,14 +2081,17 @@ EXPORT_SYMBOL_GPL(nft_unregister_expr); static const struct nft_expr_type *__nft_expr_type_get(u8 family, struct nlattr *nla) { - const struct nft_expr_type *type; + const struct nft_expr_type *type, *candidate = NULL; list_for_each_entry(type, &nf_tables_expressions, list) { - if (!nla_strcmp(nla, type->name) && - (!type->family || type->family == family)) - return type; + if (!nla_strcmp(nla, type->name)) { + if (!type->family && !candidate) + candidate = type; + else if (type->family == family) + candidate = type; + } } - return NULL; + return candidate; } static const struct nft_expr_type *nft_expr_type_get(struct net *net, From 939109c0a8e2a006a6cc8209e262d25065f4403a Mon Sep 17 00:00:00 2001 From: Ziyang Xuan Date: Sun, 7 Apr 2024 14:56:04 +0800 Subject: [PATCH 18/78] netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get() [ Upstream commit f969eb84ce482331a991079ab7a5c4dc3b7f89bf ] nft_unregister_expr() can concurrent with __nft_expr_type_get(), and there is not any protection when iterate over nf_tables_expressions list in __nft_expr_type_get(). Therefore, there is potential data-race of nf_tables_expressions list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_expressions list in __nft_expr_type_get(), and use rcu_read_lock() in the caller nft_expr_type_get() to protect the entire type query process. Fixes: ef1f7df9170d ("netfilter: nf_tables: expression ops overloading") Signed-off-by: Ziyang Xuan Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/nf_tables_api.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 79d0545badca..db453d19f2a0 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2083,7 +2083,7 @@ static const struct nft_expr_type *__nft_expr_type_get(u8 family, { const struct nft_expr_type *type, *candidate = NULL; - list_for_each_entry(type, &nf_tables_expressions, list) { + list_for_each_entry_rcu(type, &nf_tables_expressions, list) { if (!nla_strcmp(nla, type->name)) { if (!type->family && !candidate) candidate = type; @@ -2103,9 +2103,13 @@ static const struct nft_expr_type *nft_expr_type_get(struct net *net, if (nla == NULL) return ERR_PTR(-EINVAL); + rcu_read_lock(); type = __nft_expr_type_get(family, nla); - if (type != NULL && try_module_get(type->owner)) + if (type != NULL && try_module_get(type->owner)) { + rcu_read_unlock(); return type; + } + rcu_read_unlock(); lockdep_nfnl_nft_mutex_not_held(); #ifdef CONFIG_MODULES From 68459b8e3ee554ce71878af9eb69659b9462c588 Mon Sep 17 00:00:00 2001 From: Lei Chen Date: Sun, 14 Apr 2024 22:02:46 -0400 Subject: [PATCH 19/78] tun: limit printing rate when illegal packet received by tun dev [ Upstream commit f8bbc07ac535593139c875ffa19af924b1084540 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a59542 ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen Reviewed-by: Willem de Bruijn Acked-by: Jason Wang Reviewed-by: Eric Dumazet Acked-by: Michael S. Tsirkin Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/tun.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 625525275539..5d1502772fb8 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -2168,14 +2168,16 @@ static ssize_t tun_put_user(struct tun_struct *tun, tun_is_little_endian(tun), true, vlan_hlen)) { struct skb_shared_info *sinfo = skb_shinfo(skb); - pr_err("unexpected GSO type: " - "0x%x, gso_size %d, hdr_len %d\n", - sinfo->gso_type, tun16_to_cpu(tun, gso.gso_size), - tun16_to_cpu(tun, gso.hdr_len)); - print_hex_dump(KERN_ERR, "tun: ", - DUMP_PREFIX_NONE, - 16, 1, skb->head, - min((int)tun16_to_cpu(tun, gso.hdr_len), 64), true); + + if (net_ratelimit()) { + netdev_err(tun->dev, "unexpected GSO type: 0x%x, gso_size %d, hdr_len %d\n", + sinfo->gso_type, tun16_to_cpu(tun, gso.gso_size), + tun16_to_cpu(tun, gso.hdr_len)); + print_hex_dump(KERN_ERR, "tun: ", + DUMP_PREFIX_NONE, + 16, 1, skb->head, + min((int)tun16_to_cpu(tun, gso.hdr_len), 64), true); + } WARN_ON_ONCE(1); return -EINVAL; } From 4d0f5f7f583875236ccc649825cdc7cdadccd1f9 Mon Sep 17 00:00:00 2001 From: Michael Guralnik Date: Wed, 3 Apr 2024 12:03:46 +0300 Subject: [PATCH 20/78] RDMA/mlx5: Fix port number for counter query in multi-port configuration [ Upstream commit be121ffb384f53e966ee7299ffccc6eeb61bc73d ] Set the correct port when querying PPCNT in multi-port configuration. Distinguish between cases where switchdev mode was enabled to multi-port configuration and don't overwrite the queried port to 1 in multi-port case. Fixes: 74b30b3ad5ce ("RDMA/mlx5: Set local port to one when accessing counters") Signed-off-by: Michael Guralnik Link: https://lore.kernel.org/r/9bfcc8ade958b760a51408c3ad654a01b11f7d76.1712134988.git.leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin --- drivers/infiniband/hw/mlx5/mad.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c index fb6dcd12db25..a7b20db03901 100644 --- a/drivers/infiniband/hw/mlx5/mad.c +++ b/drivers/infiniband/hw/mlx5/mad.c @@ -216,7 +216,8 @@ static int process_pma_cmd(struct mlx5_ib_dev *dev, u8 port_num, mdev = dev->mdev; mdev_port_num = 1; } - if (MLX5_CAP_GEN(dev->mdev, num_ports) == 1) { + if (MLX5_CAP_GEN(dev->mdev, num_ports) == 1 && + !mlx5_core_mp_enabled(mdev)) { /* set local port to one for Function-Per-Port HCA. */ mdev = dev->mdev; mdev_port_num = 1; From c2b97f26f081ceec3298151481687071075a25cb Mon Sep 17 00:00:00 2001 From: Mikhail Kobuk Date: Thu, 11 Apr 2024 14:08:52 +0300 Subject: [PATCH 21/78] drm: nv04: Fix out of bounds access [ Upstream commit cf92bb778eda7830e79452c6917efa8474a30c1e ] When Output Resource (dcb->or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb->or is zero because ffs(dcb->or) is used as index there. The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value. Utilize macros from 'enum nouveau_or' in calls instead of hardcoding. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2e5702aff395 ("drm/nouveau: fabricate DCB encoder table for iMac G4") Fixes: 670820c0e6a9 ("drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.") Signed-off-by: Mikhail Kobuk Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20240411110854.16701-1-m.kobuk@ispras.ru Signed-off-by: Sasha Levin --- drivers/gpu/drm/nouveau/nouveau_bios.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 66bf2aff4a3e..adecda51a306 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -25,6 +25,7 @@ #include #include "nouveau_drv.h" +#include "nouveau_bios.h" #include "nouveau_reg.h" #include "dispnv04/hw.h" #include "nouveau_encoder.h" @@ -1674,7 +1675,7 @@ apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf) */ if (nv_match_device(dev, 0x0201, 0x1462, 0x8851)) { if (*conn == 0xf2005014 && *conf == 0xffffffff) { - fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 1, 1, 1); + fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 1, 1, DCB_OUTPUT_B); return false; } } @@ -1760,26 +1761,26 @@ fabricate_dcb_encoder_table(struct drm_device *dev, struct nvbios *bios) #ifdef __powerpc__ /* Apple iMac G4 NV17 */ if (of_machine_is_compatible("PowerMac4,5")) { - fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 0, all_heads, 1); - fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, 1, all_heads, 2); + fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 0, all_heads, DCB_OUTPUT_B); + fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, 1, all_heads, DCB_OUTPUT_C); return; } #endif /* Make up some sane defaults */ fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, - bios->legacy.i2c_indices.crt, 1, 1); + bios->legacy.i2c_indices.crt, 1, DCB_OUTPUT_B); if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0) fabricate_dcb_output(dcb, DCB_OUTPUT_TV, bios->legacy.i2c_indices.tv, - all_heads, 0); + all_heads, DCB_OUTPUT_A); else if (bios->tmds.output0_script_ptr || bios->tmds.output1_script_ptr) fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, bios->legacy.i2c_indices.panel, - all_heads, 1); + all_heads, DCB_OUTPUT_B); } static int From 3a63ae0348d990e137cca04eced5b08379969ea9 Mon Sep 17 00:00:00 2001 From: Nikita Zhandarovich Date: Mon, 8 Apr 2024 10:16:33 -0700 Subject: [PATCH 22/78] comedi: vmk80xx: fix incomplete endpoint checking commit d1718530e3f640b7d5f0050e725216eab57a85d8 upstream. While vmk80xx does have endpoint checking implemented, some things can fall through the cracks. Depending on the hardware model, URBs can have either bulk or interrupt type, and current version of vmk80xx_find_usb_endpoints() function does not take that fully into account. While this warning does not seem to be too harmful, at the very least it will crash systems with 'panic_on_warn' set on them. Fix the issue found by Syzkaller [1] by somewhat simplifying the endpoint checking process with usb_find_common_endpoints() and ensuring that only expected endpoint types are present. This patch has not been tested on real hardware. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 781 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: usb_start_wait_urb+0x113/0x520 drivers/usb/core/message.c:59 vmk80xx_reset_device drivers/comedi/drivers/vmk80xx.c:227 [inline] vmk80xx_auto_attach+0xa1c/0x1a40 drivers/comedi/drivers/vmk80xx.c:818 comedi_auto_config+0x238/0x380 drivers/comedi/drivers.c:1067 usb_probe_interface+0x5cd/0xb00 drivers/usb/core/driver.c:399 ... Similar issue also found by Syzkaller: Link: https://syzkaller.appspot.com/bug?extid=5205eb2f17de3e01946e Reported-and-tested-by: syzbot+5f29dc6a889fc42bd896@syzkaller.appspotmail.com Cc: stable Fixes: 49253d542cc0 ("staging: comedi: vmk80xx: factor out usb endpoint detection") Reviewed-by: Ian Abbott Signed-off-by: Nikita Zhandarovich Link: https://lore.kernel.org/r/20240408171633.31649-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/vmk80xx.c | 35 ++++++++---------------- 1 file changed, 12 insertions(+), 23 deletions(-) diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c index ccc65cfc519f..51b814e44783 100644 --- a/drivers/staging/comedi/drivers/vmk80xx.c +++ b/drivers/staging/comedi/drivers/vmk80xx.c @@ -642,32 +642,21 @@ static int vmk80xx_find_usb_endpoints(struct comedi_device *dev) struct vmk80xx_private *devpriv = dev->private; struct usb_interface *intf = comedi_to_usb_interface(dev); struct usb_host_interface *iface_desc = intf->cur_altsetting; - struct usb_endpoint_descriptor *ep_desc; - int i; + struct usb_endpoint_descriptor *ep_rx_desc, *ep_tx_desc; + int ret; - if (iface_desc->desc.bNumEndpoints != 2) + if (devpriv->model == VMK8061_MODEL) + ret = usb_find_common_endpoints(iface_desc, &ep_rx_desc, + &ep_tx_desc, NULL, NULL); + else + ret = usb_find_common_endpoints(iface_desc, NULL, NULL, + &ep_rx_desc, &ep_tx_desc); + + if (ret) return -ENODEV; - for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { - ep_desc = &iface_desc->endpoint[i].desc; - - if (usb_endpoint_is_int_in(ep_desc) || - usb_endpoint_is_bulk_in(ep_desc)) { - if (!devpriv->ep_rx) - devpriv->ep_rx = ep_desc; - continue; - } - - if (usb_endpoint_is_int_out(ep_desc) || - usb_endpoint_is_bulk_out(ep_desc)) { - if (!devpriv->ep_tx) - devpriv->ep_tx = ep_desc; - continue; - } - } - - if (!devpriv->ep_rx || !devpriv->ep_tx) - return -ENODEV; + devpriv->ep_rx = ep_rx_desc; + devpriv->ep_tx = ep_tx_desc; if (!usb_endpoint_maxp(devpriv->ep_rx) || !usb_endpoint_maxp(devpriv->ep_tx)) return -EINVAL; From 69a02273e288011b521ee7c1f3ab2c23fda633ce Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 8 Apr 2024 19:23:43 +1000 Subject: [PATCH 23/78] serial/pmac_zilog: Remove flawed mitigation for rx irq flood commit 1be3226445362bfbf461c92a5bcdb1723f2e4907 upstream. The mitigation was intended to stop the irq completely. That may be better than a hard lock-up but it turns out that you get a crash anyway if you're using pmac_zilog as a serial console: ttyPZ0: pmz: rx irq flood ! BUG: spinlock recursion on CPU#0, swapper/0 That's because the pr_err() call in pmz_receive_chars() results in pmz_console_write() attempting to lock a spinlock already locked in pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal BUG splat. The spinlock in question is the one in struct uart_port. Even when it's not fatal, the serial port rx function ceases to work. Also, the iteration limit doesn't play nicely with QEMU, as can be seen in the bug report linked below. A web search for other reports of the error message "pmz: rx irq flood" didn't produce anything. So I don't think this code is needed any more. Remove it. Cc: Benjamin Herrenschmidt Cc: Michael Ellerman Cc: Nicholas Piggin Cc: Christophe Leroy Cc: Aneesh Kumar K.V Cc: Naveen N. Rao Cc: Andy Shevchenko Cc: stable@kernel.org Cc: linux-m68k@lists.linux-m68k.org Link: https://github.com/vivier/qemu-m68k/issues/44 Link: https://lore.kernel.org/all/1078874617.9746.36.camel@gaston/ Acked-by: Michael Ellerman Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/e853cf2c762f23101cd2ddec0cc0c2be0e72685f.1712568223.git.fthain@linux-m68k.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pmac_zilog.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 3d21790d961e..2cddcf74f702 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -220,7 +220,6 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap) { struct tty_port *port; unsigned char ch, r1, drop, error, flag; - int loops = 0; /* Sanity check, make sure the old bug is no longer happening */ if (uap->port.state == NULL) { @@ -303,24 +302,11 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap) if (r1 & Rx_OVR) tty_insert_flip_char(port, 0, TTY_OVERRUN); next_char: - /* We can get stuck in an infinite loop getting char 0 when the - * line is in a wrong HW state, we break that here. - * When that happens, I disable the receive side of the driver. - * Note that what I've been experiencing is a real irq loop where - * I'm getting flooded regardless of the actual port speed. - * Something strange is going on with the HW - */ - if ((++loops) > 1000) - goto flood; ch = read_zsreg(uap, R0); if (!(ch & Rx_CH_AV)) break; } - return true; - flood: - pmz_interrupt_control(uap, 0); - pmz_error("pmz: rx irq flood !\n"); return true; } From 9a5402ed97bc701eef3d1f04cad469604aaae0ad Mon Sep 17 00:00:00 2001 From: bolan wang Date: Wed, 6 Mar 2024 19:03:39 +0800 Subject: [PATCH 24/78] USB: serial: option: add Fibocom FM135-GL variants commit 356952b13af5b2c338df1e06889fd1b5e12cbbf4 upstream. Update the USB serial option driver support for the Fibocom FM135-GL LTE modules. - VID:PID 2cb7:0115, FM135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x0115: mbim, diag, at, pipe Here are the outputs of usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0115 Rev=05.15 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: bolan wang Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7f4baceb540c..e134fc2b2901 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2272,6 +2272,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) }, /* Fibocom FM160 (MBIM mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0115, 0xff), /* Fibocom FM135 (laptop MBIM) */ + .driver_info = RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a3, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ From 5809919a53225cb041d171661af398de05fd5499 Mon Sep 17 00:00:00 2001 From: Chuanhong Guo Date: Tue, 12 Mar 2024 14:29:12 +0800 Subject: [PATCH 25/78] USB: serial: option: add support for Fibocom FM650/FG650 commit fb1f4584b1215e8c209f6b3a4028ed8351a0e961 upstream. Fibocom FM650/FG650 are 5G modems with ECM/NCM/RNDIS/MBIM modes. This patch adds support to all 4 modes. In all 4 modes, the first serial port is the AT console while the other 3 appear to be diagnostic interfaces for dumping modem logs. usb-devices output for all modes: ECM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a04 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms NCM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a05 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms RNDIS: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a06 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms MBIM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a07 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Chuanhong Guo Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e134fc2b2901..e080461a5faa 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2279,6 +2279,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a3, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */ .driver_info = RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a04, 0xff) }, /* Fibocom FM650-CN (ECM mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a05, 0xff) }, /* Fibocom FM650-CN (NCM mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a06, 0xff) }, /* Fibocom FM650-CN (RNDIS mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a07, 0xff) }, /* Fibocom FM650-CN (MBIM mode) */ { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ From 6efc183ddca84d2d67db97243897c9c01dae3941 Mon Sep 17 00:00:00 2001 From: Coia Prant Date: Mon, 15 Apr 2024 07:26:25 -0700 Subject: [PATCH 26/78] USB: serial: option: add Lonsung U8300/U9300 product commit cf16ffa17c398434a77b8a373e69287c95b60de2 upstream. Update the USB serial option driver to support Longsung U8300/U9300. For U8300 Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem. Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem. Interface mapping is: 0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b05 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms For U9300 Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem. Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem. Interface mapping is: 0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI Note: Interface 3 of some models of the U9300 series can send AT commands. T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b3c Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Tested successfully using Modem Manager on U9300. Tested successfully AT commands using If=1, If=2 and If=3 on U9300. Signed-off-by: Coia Prant Reviewed-by: Lars Melin [ johan: drop product defines, trim commit message ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e080461a5faa..c88400966854 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2052,6 +2052,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9803, 0xff), .driver_info = RSVD(4) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, 0x9b05), /* Longsung U8300 */ + .driver_info = RSVD(4) | RSVD(5) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, 0x9b3c), /* Longsung U9300 */ + .driver_info = RSVD(0) | RSVD(4) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) }, { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, From 44af06ae8bc16e7b325029dc1da51c68169d395d Mon Sep 17 00:00:00 2001 From: Jerry Meng Date: Mon, 15 Apr 2024 15:04:29 +0800 Subject: [PATCH 27/78] USB: serial: option: support Quectel EM060K sub-models commit c840244aba7ad2b83ed904378b36bd6aef25511c upstream. EM060K_129, EM060K_12a, EM060K_12b and EM0060K_12c are EM060K's sub-models, having the same name "Quectel EM060K-GL" and the same interface layout. MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0129 Rev= 5.04 S: Manufacturer=Quectel S: Product=Quectel EM060K-GL S: SerialNumber=f6fa08b6 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jerry Meng Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c88400966854..d4d09d4f8225 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -255,6 +255,10 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM061K_LMS 0x0124 #define QUECTEL_PRODUCT_EC25 0x0125 #define QUECTEL_PRODUCT_EM060K_128 0x0128 +#define QUECTEL_PRODUCT_EM060K_129 0x0129 +#define QUECTEL_PRODUCT_EM060K_12a 0x012a +#define QUECTEL_PRODUCT_EM060K_12b 0x012b +#define QUECTEL_PRODUCT_EM060K_12c 0x012c #define QUECTEL_PRODUCT_EG91 0x0191 #define QUECTEL_PRODUCT_EG95 0x0195 #define QUECTEL_PRODUCT_BG96 0x0296 @@ -1218,6 +1222,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) }, From 19301bdc1d265877e47bba58cb58738e51efb120 Mon Sep 17 00:00:00 2001 From: Vanillan Wang Date: Tue, 16 Apr 2024 18:02:55 +0800 Subject: [PATCH 28/78] USB: serial: option: add Rolling RW101-GL and RW135-GL support commit 311f97a4c7c22a01f8897bddf00428dfd0668e79 upstream. Update the USB serial option driver support for the Rolling LTE modules. - VID:PID 33f8:01a2, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a2: mbim, diag, at, pipe - VID:PID 33f8:01a3, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a3: mbim, pipe - VID:PID 33f8:01a4, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a4: mbim, diag, at, pipe - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe - VID:PID 33f8:0115, RW135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x0115: MBIM, diag, at, pipe Here are the outputs of usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a2 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a3 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a4 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=0115 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Vanillan Wang Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d4d09d4f8225..976e501ef022 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2307,6 +2307,14 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ + { USB_DEVICE(0x33f8, 0x0104), /* Rolling RW101-GL (laptop RMNET) */ + .driver_info = RSVD(4) | RSVD(5) }, + { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a2, 0xff) }, /* Rolling RW101-GL (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a3, 0xff) }, /* Rolling RW101-GL (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a4, 0xff), /* Rolling RW101-GL (laptop MBIM) */ + .driver_info = RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0115, 0xff), /* Rolling RW135-GL (laptop MBIM) */ + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) }, From 36c159eded196bbca23f0f344202815528545d2d Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Thu, 18 Apr 2024 13:34:30 +0200 Subject: [PATCH 29/78] USB: serial: option: add Telit FN920C04 rmnet compositions commit 582ee2f9d268d302595db3e36b985e5cbb93284d upstream. Add the following Telit FN920C04 compositions: 0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 976e501ef022..6ad031485320 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1376,6 +1376,12 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990 (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff), /* Telit FN20C04 (rmnet) */ + .driver_info = RSVD(0) | NCTRL(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a4, 0xff), /* Telit FN20C04 (rmnet) */ + .driver_info = RSVD(0) | NCTRL(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a9, 0xff), /* Telit FN20C04 (rmnet) */ + .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), From 347cca11bb78b9f3c29b45a9c52e70258bd008bf Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 18 Apr 2024 16:33:28 +0200 Subject: [PATCH 30/78] Revert "usb: cdc-wdm: close race between read and workqueue" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 1607830dadeefc407e4956336d9fcd9e9defd810 upstream. This reverts commit 339f83612f3a569b194680768b22bf113c26a29d. It has been found to cause problems in a number of Chromebook devices, so revert the change until it can be brought back in a safe way. Link: https://lore.kernel.org/r/385a3519-b45d-48c5-a6fd-a3fdb6bec92f@chromium.org Reported-by:: Aleksander Morgado Fixes: 339f83612f3a ("usb: cdc-wdm: close race between read and workqueue") Cc: stable Cc: Oliver Neukum Cc: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index bc2f07b0de7c..b60a4200fc2b 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -471,7 +471,6 @@ static ssize_t wdm_write static int service_outstanding_interrupt(struct wdm_device *desc) { int rv = 0; - int used; /* submit read urb only if the device is waiting for it */ if (!desc->resp_count || !--desc->resp_count) @@ -486,10 +485,7 @@ static int service_outstanding_interrupt(struct wdm_device *desc) goto out; } - used = test_and_set_bit(WDM_RESPONDING, &desc->flags); - if (used) - goto out; - + set_bit(WDM_RESPONDING, &desc->flags); spin_unlock_irq(&desc->iuspin); rv = usb_submit_urb(desc->response, GFP_KERNEL); spin_lock_irq(&desc->iuspin); From 257d313e37d66c3bcc87197fb5b8549129c45dfe Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Tue, 9 Apr 2024 12:27:54 +0000 Subject: [PATCH 31/78] usb: dwc2: host: Fix dereference issue in DDMA completion flow. commit eed04fa96c48790c1cce73c8a248e9d460b088f8 upstream. Fixed variable dereference issue in DDMA completion flow. Fixes: b258e4268850 ("usb: dwc2: host: Fix ISOC flow in DDMA mode") CC: stable@vger.kernel.org Reported-by: Dan Carpenter Closes: https://lore.kernel.org/linux-usb/2024040834-ethically-rumble-701f@gregkh/T/#m4c4b83bef0ebb4b67fe2e0a7d6466cbb6f416e39 Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/cc826d3ef53c934d8e6d98870f17f3cdc3d2755d.1712665387.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/hcd_ddma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c index 6a4aa71da103..d6fa02d851e4 100644 --- a/drivers/usb/dwc2/hcd_ddma.c +++ b/drivers/usb/dwc2/hcd_ddma.c @@ -897,13 +897,15 @@ static int dwc2_cmpl_host_isoc_dma_desc(struct dwc2_hsotg *hsotg, struct dwc2_dma_desc *dma_desc; struct dwc2_hcd_iso_packet_desc *frame_desc; u16 frame_desc_idx; - struct urb *usb_urb = qtd->urb->priv; + struct urb *usb_urb; u16 remain = 0; int rc = 0; if (!qtd->urb) return -EINVAL; + usb_urb = qtd->urb->priv; + dma_sync_single_for_cpu(hsotg->dev, qh->desc_list_dma + (idx * sizeof(struct dwc2_dma_desc)), sizeof(struct dwc2_dma_desc), From 756c5cb7c09e537b87b5d3acafcb101b2ccf394f Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Sat, 23 Mar 2024 17:48:43 +0100 Subject: [PATCH 32/78] speakup: Avoid crash on very long word commit c8d2f34ea96ea3bce6ba2535f867f0d4ee3b22e1 upstream. In case a console is set up really large and contains a really long word (> 256 characters), we have to stop before the length of the word buffer. Signed-off-by: Samuel Thibault Fixes: c6e3fd22cd538 ("Staging: add speakup to the staging directory") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240323164843.1426997-1-samuel.thibault@ens-lyon.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/speakup/main.c b/drivers/staging/speakup/main.c index 5e4e2f423e42..0b537efcee05 100644 --- a/drivers/staging/speakup/main.c +++ b/drivers/staging/speakup/main.c @@ -577,7 +577,7 @@ static u_long get_word(struct vc_data *vc) } attr_ch = get_char(vc, (u_short *)tmp_pos, &spk_attr); buf[cnt++] = attr_ch; - while (tmpx < vc->vc_cols - 1) { + while (tmpx < vc->vc_cols - 1 && cnt < sizeof(buf) - 1) { tmp_pos += 2; tmpx++; ch = get_char(vc, (u_short *)tmp_pos, &temp); From f28bba37fe244889b81bb5c508d3f6e5c6e342c5 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 13 Mar 2024 17:43:41 -0400 Subject: [PATCH 33/78] fs: sysfs: Fix reference leak in sysfs_break_active_protection() commit a90bca2228c0646fc29a72689d308e5fe03e6d78 upstream. The sysfs_break_active_protection() routine has an obvious reference leak in its error path. If the call to kernfs_find_and_get() fails then kn will be NULL, so the companion sysfs_unbreak_active_protection() routine won't get called (and would only cause an access violation by trying to dereference kn->parent if it was called). As a result, the reference to kobj acquired at the start of the function will never be released. Fix the leak by adding an explicit kobject_put() call when kn is NULL. Signed-off-by: Alan Stern Fixes: 2afc9166f79b ("scsi: sysfs: Introduce sysfs_{un,}break_active_protection()") Cc: Bart Van Assche Cc: stable@vger.kernel.org Reviewed-by: Bart Van Assche Acked-by: Tejun Heo Link: https://lore.kernel.org/r/8a4d3f0f-c5e3-4b70-a188-0ca433f9e6f9@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/file.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index cd70dbeeab22..e7c7d28c3fc6 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -429,6 +429,8 @@ struct kernfs_node *sysfs_break_active_protection(struct kobject *kobj, kn = kernfs_find_and_get(kobj->sd, attr->name); if (kn) kernfs_break_active_protection(kn); + else + kobject_put(kobj); return kn; } EXPORT_SYMBOL_GPL(sysfs_break_active_protection); From bba8ec5e9b16649d85bc9e9086bf7ae5b5716ff9 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 11 Apr 2024 11:15:09 +1000 Subject: [PATCH 34/78] nouveau: fix instmem race condition around ptr stores commit fff1386cc889d8fb4089d285f883f8cba62d82ce upstream. Running a lot of VK CTS in parallel against nouveau, once every few hours you might see something like this crash. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1 RSP: 0000:ffffac20c5857838 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001 RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180 RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10 R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ... ? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] ? gp100_vmm_pgt_mem+0x37/0x180 [nouveau] nvkm_vmm_iter+0x351/0xa20 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __lock_acquire+0x3ed/0x2170 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_map_locked+0x224/0x3a0 [nouveau] Adding any sort of useful debug usually makes it go away, so I hand wrote the function in a line, and debugged the asm. Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in the nv50_instobj_acquire called from nvkm_kmap. If Thread A and Thread B both get to nv50_instobj_acquire around the same time, and Thread A hits the refcount_set line, and in lockstep thread B succeeds at refcount_inc_not_zero, there is a chance the ptrs value won't have been stored since refcount_set is unordered. Force a memory barrier here, I picked smp_mb, since we want it on all CPUs and it's write followed by a read. v2: use paired smp_rmb/smp_wmb. Cc: Fixes: be55287aa5ba ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj") Signed-off-by: Dave Airlie Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20240411011510.2546857-1-airlied@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c b/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c index db48a1daca0c..f8ca79eaa7f7 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c @@ -221,8 +221,11 @@ nv50_instobj_acquire(struct nvkm_memory *memory) void __iomem *map = NULL; /* Already mapped? */ - if (refcount_inc_not_zero(&iobj->maps)) + if (refcount_inc_not_zero(&iobj->maps)) { + /* read barrier match the wmb on refcount set */ + smp_rmb(); return iobj->map; + } /* Take the lock, and re-check that another thread hasn't * already mapped the object in the meantime. @@ -249,6 +252,8 @@ nv50_instobj_acquire(struct nvkm_memory *memory) iobj->base.memory.ptrs = &nv50_instobj_fast; else iobj->base.memory.ptrs = &nv50_instobj_slow; + /* barrier to ensure the ptrs are written before refcount is set */ + smp_wmb(); refcount_set(&iobj->maps, 1); } From 054f29e9ca05be3906544c5f2a2c7321c30a4243 Mon Sep 17 00:00:00 2001 From: Jeongjun Park Date: Tue, 16 Apr 2024 03:20:48 +0900 Subject: [PATCH 35/78] nilfs2: fix OOB in nilfs_set_de_type commit c4a7dc9523b59b3e73fd522c73e95e072f876b16 upstream. The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function, which uses this array, specifies the index to read from the array in the same way as "(mode & S_IFMT) >> S_SHIFT". static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode *inode) { umode_t mode = inode->i_mode; de->file_type = nilfs_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; // oob } However, when the index is determined this way, an out-of-bounds (OOB) error occurs by referring to an index that is 1 larger than the array size when the condition "mode & S_IFMT == S_IFMT" is satisfied. Therefore, a patch to resize the nilfs_type_by_mode array should be applied to prevent OOB errors. Link: https://lkml.kernel.org/r/20240415182048.7144-1-konishi.ryusuke@gmail.com Reported-by: syzbot+2e22057de05b9f3b30d8@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2e22057de05b9f3b30d8 Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations") Signed-off-by: Jeongjun Park Signed-off-by: Ryusuke Konishi Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- fs/nilfs2/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c index 81394e22d0a0..eb7de9e2a384 100644 --- a/fs/nilfs2/dir.c +++ b/fs/nilfs2/dir.c @@ -243,7 +243,7 @@ nilfs_filetype_table[NILFS_FT_MAX] = { #define S_SHIFT 12 static unsigned char -nilfs_type_by_mode[S_IFMT >> S_SHIFT] = { +nilfs_type_by_mode[(S_IFMT >> S_SHIFT) + 1] = { [S_IFREG >> S_SHIFT] = NILFS_FT_REG_FILE, [S_IFDIR >> S_SHIFT] = NILFS_FT_DIR, [S_IFCHR >> S_SHIFT] = NILFS_FT_CHRDEV, From d74f1a1f913b4a1592dec3cc30640ddd9f8aeda4 Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Tue, 18 Dec 2018 14:33:25 -0600 Subject: [PATCH 36/78] tracing: Remove hist trigger synth_var_refs commit 912201345f7c39e6b0ac283207be2b6641fa47b9 upstream. All var_refs are now handled uniformly and there's no reason to treat the synth_refs in a special way now, so remove them and associated functions. Link: http://lkml.kernel.org/r/b4d3470526b8f0426dcec125399dad9ad9b8589d.1545161087.git.tom.zanussi@linux.intel.com Acked-by: Namhyung Kim Reviewed-by: Masami Hiramatsu Signed-off-by: Tom Zanussi Signed-off-by: Steven Rostedt (VMware) Signed-off-by: George Guo Signed-off-by: Greg Kroah-Hartman --- kernel/trace/trace_events_hist.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c index e004daf8cad5..e4f5b6894cf2 100644 --- a/kernel/trace/trace_events_hist.c +++ b/kernel/trace/trace_events_hist.c @@ -280,8 +280,6 @@ struct hist_trigger_data { struct action_data *actions[HIST_ACTIONS_MAX]; unsigned int n_actions; - struct hist_field *synth_var_refs[SYNTH_FIELDS_MAX]; - unsigned int n_synth_var_refs; struct field_var *field_vars[SYNTH_FIELDS_MAX]; unsigned int n_field_vars; unsigned int n_field_var_str; @@ -3708,20 +3706,6 @@ static void save_field_var(struct hist_trigger_data *hist_data, } -static void destroy_synth_var_refs(struct hist_trigger_data *hist_data) -{ - unsigned int i; - - for (i = 0; i < hist_data->n_synth_var_refs; i++) - destroy_hist_field(hist_data->synth_var_refs[i], 0); -} - -static void save_synth_var_ref(struct hist_trigger_data *hist_data, - struct hist_field *var_ref) -{ - hist_data->synth_var_refs[hist_data->n_synth_var_refs++] = var_ref; -} - static int check_synth_field(struct synth_event *event, struct hist_field *hist_field, unsigned int field_pos) @@ -3884,7 +3868,6 @@ static int onmatch_create(struct hist_trigger_data *hist_data, goto err; } - save_synth_var_ref(hist_data, var_ref); field_pos++; kfree(p); continue; @@ -4631,7 +4614,6 @@ static void destroy_hist_data(struct hist_trigger_data *hist_data) destroy_actions(hist_data); destroy_field_vars(hist_data); destroy_field_var_hists(hist_data); - destroy_synth_var_refs(hist_data); kfree(hist_data); } From 3dc763bdb05ea12afafb5af62cf37e88d8f7f6dd Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Wed, 19 Dec 2018 13:09:16 -0600 Subject: [PATCH 37/78] tracing: Use var_refs[] for hist trigger reference checking commit e4f6d245031e04bdd12db390298acec0474a1a46 upstream. Since all the variable reference hist_fields are collected into hist_data->var_refs[] array, there's no need to go through all the fields looking for them, or in separate arrays like synth_var_refs[], which will be going away soon anyway. This also allows us to get rid of some unnecessary code and functions currently used for the same purpose. Link: http://lkml.kernel.org/r/1545246556.4239.7.camel@gmail.com Acked-by: Namhyung Kim Reviewed-by: Masami Hiramatsu Signed-off-by: Tom Zanussi Signed-off-by: Steven Rostedt (VMware) Signed-off-by: George Guo Signed-off-by: Greg Kroah-Hartman --- kernel/trace/trace_events_hist.c | 68 ++++++-------------------------- 1 file changed, 11 insertions(+), 57 deletions(-) diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c index e4f5b6894cf2..ede370225245 100644 --- a/kernel/trace/trace_events_hist.c +++ b/kernel/trace/trace_events_hist.c @@ -1289,49 +1289,13 @@ check_field_for_var_ref(struct hist_field *hist_field, struct hist_trigger_data *var_data, unsigned int var_idx) { - struct hist_field *found = NULL; + WARN_ON(!(hist_field && hist_field->flags & HIST_FIELD_FL_VAR_REF)); - if (hist_field && hist_field->flags & HIST_FIELD_FL_VAR_REF) { - if (hist_field->var.idx == var_idx && - hist_field->var.hist_data == var_data) { - found = hist_field; - } - } + if (hist_field && hist_field->var.idx == var_idx && + hist_field->var.hist_data == var_data) + return hist_field; - return found; -} - -static struct hist_field * -check_field_for_var_refs(struct hist_trigger_data *hist_data, - struct hist_field *hist_field, - struct hist_trigger_data *var_data, - unsigned int var_idx, - unsigned int level) -{ - struct hist_field *found = NULL; - unsigned int i; - - if (level > 3) - return found; - - if (!hist_field) - return found; - - found = check_field_for_var_ref(hist_field, var_data, var_idx); - if (found) - return found; - - for (i = 0; i < HIST_FIELD_OPERANDS_MAX; i++) { - struct hist_field *operand; - - operand = hist_field->operands[i]; - found = check_field_for_var_refs(hist_data, operand, var_data, - var_idx, level + 1); - if (found) - return found; - } - - return found; + return NULL; } /** @@ -1350,26 +1314,16 @@ static struct hist_field *find_var_ref(struct hist_trigger_data *hist_data, struct hist_trigger_data *var_data, unsigned int var_idx) { - struct hist_field *hist_field, *found = NULL; + struct hist_field *hist_field; unsigned int i; - for_each_hist_field(i, hist_data) { - hist_field = hist_data->fields[i]; - found = check_field_for_var_refs(hist_data, hist_field, - var_data, var_idx, 0); - if (found) - return found; + for (i = 0; i < hist_data->n_var_refs; i++) { + hist_field = hist_data->var_refs[i]; + if (check_field_for_var_ref(hist_field, var_data, var_idx)) + return hist_field; } - for (i = 0; i < hist_data->n_synth_var_refs; i++) { - hist_field = hist_data->synth_var_refs[i]; - found = check_field_for_var_refs(hist_data, hist_field, - var_data, var_idx, 0); - if (found) - return found; - } - - return found; + return NULL; } /** From e0fbabb4865a9f2eebfa8688765fd6fd76185bba Mon Sep 17 00:00:00 2001 From: Iskander Amara Date: Fri, 8 Mar 2024 09:52:43 +0100 Subject: [PATCH 38/78] arm64: dts: rockchip: fix alphabetical ordering RK3399 puma [ Upstream commit f0abb4b2c7acf3c3e4130dc3f54cd90cf2ae62bc ] Nodes overridden by their reference should be ordered alphabetically to make it easier to read the DTS. pinctrl node is defined in the wrong location so let's reorder it. Signed-off-by: Iskander Amara Reviewed-by: Quentin Schulz Link: https://lore.kernel.org/r/20240308085243.69903-2-iskander.amara@theobroma-systems.com Signed-off-by: Heiko Stuebner Stable-dep-of: 945a7c857091 ("arm64: dts: rockchip: enable internal pull-up on PCIE_WAKE# for RK3399 Puma") Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 6750b8100421..b79017c41ce5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -426,15 +426,6 @@ gpio1830-supply = <&vcc_1v8>; }; -&pmu_io_domains { - status = "okay"; - pmu1830-supply = <&vcc_1v8>; -}; - -&pwm2 { - status = "okay"; -}; - &pinctrl { i2c8 { i2c8_xfer_a: i2c8-xfer { @@ -466,6 +457,15 @@ }; }; +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_1v8>; +}; + +&pwm2 { + status = "okay"; +}; + &sdhci { /* * Signal integrity isn't great at 200MHz but 100MHz has proven stable From 8ada42c66029ee8ec7918b2a5bb2feb9dbe461f1 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Fri, 8 Mar 2024 16:46:08 +0100 Subject: [PATCH 39/78] arm64: dts: rockchip: enable internal pull-up on PCIE_WAKE# for RK3399 Puma [ Upstream commit 945a7c8570916650a415757d15d83e0fa856a686 ] The PCIE_WAKE# has a diode used as a level-shifter, and is used as an input pin. While the SoC default is to enable the pull-up, the core rk3399 pinconf for this pin opted for pull-none. So as to not disturb the behaviour of other boards which may rely on pull-none instead of pull-up, set the needed pull-up only for RK3399 Puma. Fixes: 60fd9f72ce8a ("arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM") Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20240308-puma-diode-pu-v2-2-309f83da110a@theobroma-systems.com Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index b79017c41ce5..1c9b4a955708 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -426,6 +426,11 @@ gpio1830-supply = <&vcc_1v8>; }; +&pcie_clkreqn_cpm { + rockchip,pins = + <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; +}; + &pinctrl { i2c8 { i2c8_xfer_a: i2c8-xfer { From 19e43d5a9e9439dcf2cbb7a8ecb7cfd725968f8f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sun, 17 Mar 2024 23:10:48 +0100 Subject: [PATCH 40/78] arm64: dts: mediatek: mt7622: fix IR nodename MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 800dc93c3941e372c94278bf4059e6e82f60bd66 ] Fix following validation error: arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: cir@10009000: $nodename:0: 'cir@10009000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$' from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml# Fixes: ae457b7679c4 ("arm64: dts: mt7622: add SoC and peripheral related device nodes") Signed-off-by: Rafał Miłecki Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20240317221050.18595-3-zajec5@gmail.com Signed-off-by: AngeloGioacchino Del Regno Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 5cb0470ede72..5c12e9dad916 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -232,7 +232,7 @@ clock-names = "hif_sel"; }; - cir: cir@10009000 { + cir: ir-receiver@10009000 { compatible = "mediatek,mt7622-cir"; reg = <0 0x10009000 0 0x1000>; interrupts = ; From f81938d0666c0e812d72b8ba9127fb7577ab393a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sun, 17 Mar 2024 23:10:49 +0100 Subject: [PATCH 41/78] arm64: dts: mediatek: mt7622: fix ethernet controller "compatible" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 208add29ce5b7291f6c466e4dfd9cbf61c72888e ] Fix following validation error: arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: ethernet@1b100000: compatible: ['mediatek,mt7622-eth', 'mediatek,mt2701-eth', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/net/mediatek,net.yaml# (and other complains about wrong clocks). Fixes: 5f599b3a0bb8 ("arm64: dts: mt7622: add ethernet device nodes") Signed-off-by: Rafał Miłecki Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20240317221050.18595-4-zajec5@gmail.com Signed-off-by: AngeloGioacchino Del Regno Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 5c12e9dad916..76297dac2d45 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -846,9 +846,7 @@ }; eth: ethernet@1b100000 { - compatible = "mediatek,mt7622-eth", - "mediatek,mt2701-eth", - "syscon"; + compatible = "mediatek,mt7622-eth"; reg = <0 0x1b100000 0 0x20000>; interrupts = , , From 084db3d6ec6f934b7678afac57fcdb32b7c99dbf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sun, 17 Mar 2024 23:10:50 +0100 Subject: [PATCH 42/78] arm64: dts: mediatek: mt7622: drop "reset-names" from thermal block MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit ecb5b0034f5bcc35003b4b965cf50c6e98316e79 ] Binding doesn't specify "reset-names" property and Linux driver also doesn't use it. Fix following validation error: arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: thermal@1100b000: Unevaluated properties are not allowed ('reset-names' was unexpected) from schema $id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml# Fixes: ae457b7679c4 ("arm64: dts: mt7622: add SoC and peripheral related device nodes") Signed-off-by: Rafał Miłecki Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20240317221050.18595-5-zajec5@gmail.com Signed-off-by: AngeloGioacchino Del Regno Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 76297dac2d45..f8df34ac1e64 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -459,7 +459,6 @@ <&pericfg CLK_PERI_AUXADC_PD>; clock-names = "therm", "auxadc"; resets = <&pericfg MT7622_PERI_THERM_SW_RST>; - reset-names = "therm"; mediatek,auxadc = <&auxadc>; mediatek,apmixedsys = <&apmixedsys>; nvmem-cells = <&thermal_calibration>; From 60874cc9e4d57c357266ad8b1b1b3b960be8af77 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Fri, 29 Mar 2024 10:36:50 +0000 Subject: [PATCH 43/78] ARC: [plat-hsdk]: Remove misplaced interrupt-cells property [ Upstream commit 61231eb8113ce47991f35024f9c20810b37996bf ] "gmac" node stands for just an ordinary Ethernet controller, which is by no means a provider of interrupts, i.e. it doesn't serve as an interrupt controller, thus "#interrupt-cells" property doesn't belong to it and so we remove it. Fixes: ------------>8------------ DTC arch/arc/boot/dts/hsdk.dtb arch/arc/boot/dts/hsdk.dts:207.23-235.5: Warning (interrupt_provider): /soc/ethernet@8000: '#interrupt-cells' found, but node is not an interrupt provider arch/arc/boot/dts/hsdk.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' ------------>8------------ Reported-by: Vineet Gupta Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin --- arch/arc/boot/dts/hsdk.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts index f6b6e3c9ca8a..40a6681bae8a 100644 --- a/arch/arc/boot/dts/hsdk.dts +++ b/arch/arc/boot/dts/hsdk.dts @@ -170,7 +170,6 @@ }; gmac: ethernet@8000 { - #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = <0x8000 0x2000>; interrupts = <10>; From 961711809db16bcf24853bfb82653d1b1b37f3bf Mon Sep 17 00:00:00 2001 From: David Bauer Date: Thu, 18 Apr 2024 15:29:08 +0200 Subject: [PATCH 44/78] vxlan: drop packets from invalid src-address [ Upstream commit f58f45c1e5b92975e91754f5407250085a6ae7cf ] The VXLAN driver currently does not check if the inner layer2 source-address is valid. In case source-address snooping/learning is enabled, a entry in the FDB for the invalid address is created with the layer3 address of the tunnel endpoint. If the frame happens to have a non-unicast address set, all this non-unicast traffic is subsequently not flooded to the tunnel network but sent to the learnt host in the FDB. To make matters worse, this FDB entry does not expire. Apply the same filtering for packets as it is done for bridges. This not only drops these invalid packets but avoids them from being learnt into the FDB. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Suggested-by: Ido Schimmel Signed-off-by: David Bauer Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/vxlan.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index d5c8d0d54b33..b004c8b6ec28 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1320,6 +1320,10 @@ static bool vxlan_set_mac(struct vxlan_dev *vxlan, if (ether_addr_equal(eth_hdr(skb)->h_source, vxlan->dev->dev_addr)) return false; + /* Ignore packets from invalid src-address */ + if (!is_valid_ether_addr(eth_hdr(skb)->h_source)) + return false; + /* Get address from the outer IP header */ if (vxlan_get_sk_family(vs) == AF_INET) { saddr.sin.sin_addr.s_addr = ip_hdr(skb)->saddr; From 4235cc4d207b535969eef8f3e610f9caafac7295 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 18 Apr 2024 15:46:06 +0200 Subject: [PATCH 45/78] mlxsw: core: Unregister EMAD trap using FORWARD action [ Upstream commit 976c44af48141cd8595601c0af2a19a43c5b228b ] The device's manual (PRM - Programmer's Reference Manual) classifies the trap that is used to deliver EMAD responses as an "event trap". Among other things, it means that the only actions that can be associated with the trap are TRAP and FORWARD (NOP). Currently, during driver de-initialization the driver unregisters the trap by setting its action to DISCARD, which violates the above guideline. Future firmware versions will prevent such misuses by returning an error. This does not prevent the driver from working, but an error will be printed to the kernel log during module removal / devlink reload: mlxsw_spectrum 0000:03:00.0: Reg cmd access status failed (status=7(bad parameter)) mlxsw_spectrum 0000:03:00.0: Reg cmd access failed (reg_id=7003(hpkt),type=write) Suppress the error message by aligning the driver to the manual and use a FORWARD (NOP) action when unregistering the trap. Fixes: 4ec14b7634b2 ("mlxsw: Add interface to access registers and process events") Cc: Jiri Pirko Cc: Amit Cohen Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Reviewed-by: Simon Horman Signed-off-by: Petr Machata Link: https://lore.kernel.org/r/753a89e14008fde08cb4a2c1e5f537b81d8eb2d6.1713446092.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/mellanox/mlxsw/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c index 049ca4ba49de..2950c30ac172 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core.c @@ -561,7 +561,7 @@ static void mlxsw_emad_rx_listener_func(struct sk_buff *skb, u8 local_port, static const struct mlxsw_listener mlxsw_emad_rx_listener = MLXSW_RXL(mlxsw_emad_rx_listener_func, ETHEMAD, TRAP_TO_CPU, false, - EMAD, DISCARD); + EMAD, FORWARD); static int mlxsw_emad_init(struct mlxsw_core *mlxsw_core) { From 33ba7baa3cba4b49190635ff883770dd2ae5a3e5 Mon Sep 17 00:00:00 2001 From: Paul Geurts Date: Thu, 18 Apr 2024 21:25:38 +0200 Subject: [PATCH 46/78] NFC: trf7970a: disable all regulators on removal [ Upstream commit 6bea4f03c6a4e973ef369e15aac88f37981db49e ] During module probe, regulator 'vin' and 'vdd-io' are used and enabled, but the vdd-io regulator overwrites the 'vin' regulator pointer. During remove, only the vdd-io is disabled, as the vin regulator pointer is not available anymore. When regulator_put() is called during resource cleanup a kernel warning is given, as the regulator is still enabled. Store the two regulators in separate pointers and disable both the regulators on module remove. Fixes: 49d22c70aaf0 ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage") Signed-off-by: Paul Geurts Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/nfc/trf7970a.c | 42 +++++++++++++++++++++++------------------- 1 file changed, 23 insertions(+), 19 deletions(-) diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c index eee5cc1a9220..5ad5baf1d6f8 100644 --- a/drivers/nfc/trf7970a.c +++ b/drivers/nfc/trf7970a.c @@ -427,7 +427,8 @@ struct trf7970a { enum trf7970a_state state; struct device *dev; struct spi_device *spi; - struct regulator *regulator; + struct regulator *vin_regulator; + struct regulator *vddio_regulator; struct nfc_digital_dev *ddev; u32 quirks; bool is_initiator; @@ -1886,7 +1887,7 @@ static int trf7970a_power_up(struct trf7970a *trf) if (trf->state != TRF7970A_ST_PWR_OFF) return 0; - ret = regulator_enable(trf->regulator); + ret = regulator_enable(trf->vin_regulator); if (ret) { dev_err(trf->dev, "%s - Can't enable VIN: %d\n", __func__, ret); return ret; @@ -1929,7 +1930,7 @@ static int trf7970a_power_down(struct trf7970a *trf) if (trf->en2_gpiod && !(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) gpiod_set_value_cansleep(trf->en2_gpiod, 0); - ret = regulator_disable(trf->regulator); + ret = regulator_disable(trf->vin_regulator); if (ret) dev_err(trf->dev, "%s - Can't disable VIN: %d\n", __func__, ret); @@ -2068,37 +2069,37 @@ static int trf7970a_probe(struct spi_device *spi) mutex_init(&trf->lock); INIT_DELAYED_WORK(&trf->timeout_work, trf7970a_timeout_work_handler); - trf->regulator = devm_regulator_get(&spi->dev, "vin"); - if (IS_ERR(trf->regulator)) { - ret = PTR_ERR(trf->regulator); + trf->vin_regulator = devm_regulator_get(&spi->dev, "vin"); + if (IS_ERR(trf->vin_regulator)) { + ret = PTR_ERR(trf->vin_regulator); dev_err(trf->dev, "Can't get VIN regulator: %d\n", ret); goto err_destroy_lock; } - ret = regulator_enable(trf->regulator); + ret = regulator_enable(trf->vin_regulator); if (ret) { dev_err(trf->dev, "Can't enable VIN: %d\n", ret); goto err_destroy_lock; } - uvolts = regulator_get_voltage(trf->regulator); + uvolts = regulator_get_voltage(trf->vin_regulator); if (uvolts > 4000000) trf->chip_status_ctrl = TRF7970A_CHIP_STATUS_VRS5_3; - trf->regulator = devm_regulator_get(&spi->dev, "vdd-io"); - if (IS_ERR(trf->regulator)) { - ret = PTR_ERR(trf->regulator); + trf->vddio_regulator = devm_regulator_get(&spi->dev, "vdd-io"); + if (IS_ERR(trf->vddio_regulator)) { + ret = PTR_ERR(trf->vddio_regulator); dev_err(trf->dev, "Can't get VDD_IO regulator: %d\n", ret); - goto err_destroy_lock; + goto err_disable_vin_regulator; } - ret = regulator_enable(trf->regulator); + ret = regulator_enable(trf->vddio_regulator); if (ret) { dev_err(trf->dev, "Can't enable VDD_IO: %d\n", ret); - goto err_destroy_lock; + goto err_disable_vin_regulator; } - if (regulator_get_voltage(trf->regulator) == 1800000) { + if (regulator_get_voltage(trf->vddio_regulator) == 1800000) { trf->io_ctrl = TRF7970A_REG_IO_CTRL_IO_LOW; dev_dbg(trf->dev, "trf7970a config vdd_io to 1.8V\n"); } @@ -2111,7 +2112,7 @@ static int trf7970a_probe(struct spi_device *spi) if (!trf->ddev) { dev_err(trf->dev, "Can't allocate NFC digital device\n"); ret = -ENOMEM; - goto err_disable_regulator; + goto err_disable_vddio_regulator; } nfc_digital_set_parent_dev(trf->ddev, trf->dev); @@ -2140,8 +2141,10 @@ static int trf7970a_probe(struct spi_device *spi) trf7970a_shutdown(trf); err_free_ddev: nfc_digital_free_device(trf->ddev); -err_disable_regulator: - regulator_disable(trf->regulator); +err_disable_vddio_regulator: + regulator_disable(trf->vddio_regulator); +err_disable_vin_regulator: + regulator_disable(trf->vin_regulator); err_destroy_lock: mutex_destroy(&trf->lock); return ret; @@ -2160,7 +2163,8 @@ static int trf7970a_remove(struct spi_device *spi) nfc_digital_unregister_device(trf->ddev); nfc_digital_free_device(trf->ddev); - regulator_disable(trf->regulator); + regulator_disable(trf->vddio_regulator); + regulator_disable(trf->vin_regulator); mutex_destroy(&trf->lock); From 571d30b27680591a576c29782617d95820e765ee Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 21 Apr 2024 19:38:28 +0000 Subject: [PATCH 47/78] net: usb: ax88179_178a: stop lying about skb->truesize [ Upstream commit 4ce62d5b2f7aecd4900e7d6115588ad7f9acccca ] Some usb drivers try to set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize overide. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") Fixes: f8ebb3ac881b ("net: usb: ax88179_178a: Fix packet receiving") Reported-by: shironeko Closes: https://lore.kernel.org/netdev/c110f41a0d2776b525930f213ca9715c@tesaguri.club/ Signed-off-by: Eric Dumazet Cc: Jose Alonso Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240421193828.1966195-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/usb/ax88179_178a.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 3df203feb09c..812361e832fd 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1465,21 +1465,16 @@ static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb) /* Skip IP alignment pseudo header */ skb_pull(skb, 2); - skb->truesize = SKB_TRUESIZE(pkt_len_plus_padd); ax88179_rx_checksum(skb, pkt_hdr); return 1; } - ax_skb = skb_clone(skb, GFP_ATOMIC); + ax_skb = netdev_alloc_skb_ip_align(dev->net, pkt_len); if (!ax_skb) return 0; - skb_trim(ax_skb, pkt_len); + skb_put(ax_skb, pkt_len); + memcpy(ax_skb->data, skb->data + 2, pkt_len); - /* Skip IP alignment pseudo header */ - skb_pull(ax_skb, 2); - - skb->truesize = pkt_len_plus_padd + - SKB_DATA_ALIGN(sizeof(struct sk_buff)); ax88179_rx_checksum(ax_skb, pkt_hdr); usbnet_skb_return(dev, ax_skb); From 07b20d0a3dc13fb1adff10b60021a4924498da58 Mon Sep 17 00:00:00 2001 From: Hyunwoo Kim Date: Mon, 22 Apr 2024 05:39:30 -0400 Subject: [PATCH 48/78] net: gtp: Fix Use-After-Free in gtp_dellink [ Upstream commit f2a904107ee2b647bb7794a1a82b67740d7c8a64 ] Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of gtp_dellink, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. Fixes: 94dc550a5062 ("gtp: fix an use-after-free in ipv4_pdp_find()") Signed-off-by: Hyunwoo Kim Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/gtp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c index 3f4e20a9ce9a..db97f2fa203c 100644 --- a/drivers/net/gtp.c +++ b/drivers/net/gtp.c @@ -710,11 +710,12 @@ static int gtp_newlink(struct net *src_net, struct net_device *dev, static void gtp_dellink(struct net_device *dev, struct list_head *head) { struct gtp_dev *gtp = netdev_priv(dev); + struct hlist_node *next; struct pdp_ctx *pctx; int i; for (i = 0; i < gtp->hash_size; i++) - hlist_for_each_entry_rcu(pctx, >p->tid_hash[i], hlist_tid) + hlist_for_each_entry_safe(pctx, next, >p->tid_hash[i], hlist_tid) pdp_context_delete(pctx); gtp_encap_disable(gtp); From 740a06078ac58840494934ace6055eb879f267fb Mon Sep 17 00:00:00 2001 From: Ismael Luceno Date: Sun, 21 Apr 2024 16:22:32 +0200 Subject: [PATCH 49/78] ipvs: Fix checksumming on GSO of SCTP packets [ Upstream commit e10d3ba4d434ed172914617ed8d74bd411421193 ] It was observed in the wild that pairs of consecutive packets would leave the IPVS with the same wrong checksum, and the issue only went away when disabling GSO. IPVS needs to avoid computing the SCTP checksum when using GSO. Fixes: 90017accff61 ("sctp: Add GSO support") Co-developed-by: Firo Yang Signed-off-by: Ismael Luceno Tested-by: Andreas Taschner Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/ipvs/ip_vs_proto_sctp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_proto_sctp.c b/net/netfilter/ipvs/ip_vs_proto_sctp.c index b0cd7d08f2a7..18e2e489d0e5 100644 --- a/net/netfilter/ipvs/ip_vs_proto_sctp.c +++ b/net/netfilter/ipvs/ip_vs_proto_sctp.c @@ -123,7 +123,8 @@ sctp_snat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, if (sctph->source != cp->vport || payload_csum || skb->ip_summed == CHECKSUM_PARTIAL) { sctph->source = cp->vport; - sctp_nat_csum(skb, sctph, sctphoff); + if (!skb_is_gso(skb) || !skb_is_gso_sctp(skb)) + sctp_nat_csum(skb, sctph, sctphoff); } else { skb->ip_summed = CHECKSUM_UNNECESSARY; } @@ -171,7 +172,8 @@ sctp_dnat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, (skb->ip_summed == CHECKSUM_PARTIAL && !(skb_dst(skb)->dev->features & NETIF_F_SCTP_CRC))) { sctph->dest = cp->dport; - sctp_nat_csum(skb, sctph, sctphoff); + if (!skb_is_gso(skb) || !skb_is_gso_sctp(skb)) + sctp_nat_csum(skb, sctph, sctphoff); } else if (skb->ip_summed != CHECKSUM_PARTIAL) { skb->ip_summed = CHECKSUM_UNNECESSARY; } From fb885da71cc33a6487f142e016e7cd44d70cb8a6 Mon Sep 17 00:00:00 2001 From: Tonghao Zhang Date: Fri, 17 Apr 2020 02:57:31 +0800 Subject: [PATCH 50/78] net: openvswitch: ovs_ct_exit to be done under ovs_lock [ Upstream commit 27de77cec985233bdf6546437b9761853265c505 ] syzbot wrote: | ============================= | WARNING: suspicious RCU usage | 5.7.0-rc1+ #45 Not tainted | ----------------------------- | net/openvswitch/conntrack.c:1898 RCU-list traversed in non-reader section!! | | other info that might help us debug this: | rcu_scheduler_active = 2, debug_locks = 1 | ... | | stack backtrace: | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 | Workqueue: netns cleanup_net | Call Trace: | ... | ovs_ct_exit | ovs_exit_net | ops_exit_list.isra.7 | cleanup_net | process_one_work | worker_thread To avoid that warning, invoke the ovs_ct_exit under ovs_lock and add lockdep_ovsl_is_held as optional lockdep expression. Link: https://lore.kernel.org/lkml/000000000000e642a905a0cbee6e@google.com Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Cc: Pravin B Shelar Cc: Yi-Hung Wei Reported-by: syzbot+7ef50afd3a211f879112@syzkaller.appspotmail.com Signed-off-by: Tonghao Zhang Acked-by: Pravin B Shelar Signed-off-by: David S. Miller Stable-dep-of: 5ea7b72d4fac ("net: openvswitch: Fix Use-After-Free in ovs_ct_exit") Signed-off-by: Sasha Levin --- net/openvswitch/conntrack.c | 3 ++- net/openvswitch/datapath.c | 4 +++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c index 0777c8d416f1..352e80e6cd75 100644 --- a/net/openvswitch/conntrack.c +++ b/net/openvswitch/conntrack.c @@ -1837,7 +1837,8 @@ static void ovs_ct_limit_exit(struct net *net, struct ovs_net *ovs_net) struct hlist_head *head = &info->limits[i]; struct ovs_ct_limit *ct_limit; - hlist_for_each_entry_rcu(ct_limit, head, hlist_node) + hlist_for_each_entry_rcu(ct_limit, head, hlist_node, + lockdep_ovsl_is_held()) kfree_rcu(ct_limit, rcu); } kfree(ovs_net->ct_limit_info->limits); diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c index 0551915519d9..db27a43f5c5a 100644 --- a/net/openvswitch/datapath.c +++ b/net/openvswitch/datapath.c @@ -2390,8 +2390,10 @@ static void __net_exit ovs_exit_net(struct net *dnet) struct net *net; LIST_HEAD(head); - ovs_ct_exit(dnet); ovs_lock(); + + ovs_ct_exit(dnet); + list_for_each_entry_safe(dp, dp_next, &ovs_net->dps, list_node) __dp_destroy(dp); From 2db9a8c0a01fa1c762c1e61a13c212c492752994 Mon Sep 17 00:00:00 2001 From: Hyunwoo Kim Date: Mon, 22 Apr 2024 05:37:17 -0400 Subject: [PATCH 51/78] net: openvswitch: Fix Use-After-Free in ovs_ct_exit [ Upstream commit 5ea7b72d4fac2fdbc0425cd8f2ea33abe95235b2 ] Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Signed-off-by: Hyunwoo Kim Reviewed-by: Eric Dumazet Reviewed-by: Aaron Conole Link: https://lore.kernel.org/r/ZiYvzQN/Ry5oeFQW@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- net/openvswitch/conntrack.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c index 352e80e6cd75..3ea1e5ffaf80 100644 --- a/net/openvswitch/conntrack.c +++ b/net/openvswitch/conntrack.c @@ -1836,9 +1836,9 @@ static void ovs_ct_limit_exit(struct net *net, struct ovs_net *ovs_net) for (i = 0; i < CT_LIMIT_HASH_BUCKETS; ++i) { struct hlist_head *head = &info->limits[i]; struct ovs_ct_limit *ct_limit; + struct hlist_node *next; - hlist_for_each_entry_rcu(ct_limit, head, hlist_node, - lockdep_ovsl_is_held()) + hlist_for_each_entry_safe(ct_limit, next, head, hlist_node) kfree_rcu(ct_limit, rcu); } kfree(ovs_net->ct_limit_info->limits); From 09b54d29f05129b092f7c793a70b689ffb3c7b2c Mon Sep 17 00:00:00 2001 From: Sindhu Devale Date: Tue, 23 Apr 2024 11:27:17 -0700 Subject: [PATCH 52/78] i40e: Do not use WQ_MEM_RECLAIM flag for workqueue [ Upstream commit 2cc7d150550cc981aceedf008f5459193282425c ] Issue reported by customer during SRIOV testing, call trace: When both i40e and the i40iw driver are loaded, a warning in check_flush_dependency is being triggered. This seems to be because of the i40e driver workqueue is allocated with the WQ_MEM_RECLAIM flag, and the i40iw one is not. Similar error was encountered on ice too and it was fixed by removing the flag. Do the same for i40e too. [Feb 9 09:08] ------------[ cut here ]------------ [ +0.000004] workqueue: WQ_MEM_RECLAIM i40e:i40e_service_task [i40e] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000060] WARNING: CPU: 0 PID: 937 at kernel/workqueue.c:2966 check_flush_dependency+0x10b/0x120 [ +0.000007] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_timer snd_seq_device snd soundcore nls_utf8 cifs cifs_arc4 nls_ucs2_utils rdma_cm iw_cm ib_cm cifs_md4 dns_resolver netfs qrtr rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common irdma intel_uncore_frequency intel_uncore_frequency_common ice ipmi_ssif isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp gnss coretemp ib_uverbs rapl intel_cstate ib_core iTCO_wdt iTCO_vendor_support acpi_ipmi mei_me ipmi_si intel_uncore ioatdma i2c_i801 joydev pcspkr mei ipmi_devintf lpc_ich intel_pch_thermal i2c_smbus ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c ast sd_mod drm_shmem_helper t10_pi drm_kms_helper sg ixgbe drm i40e ahci crct10dif_pclmul libahci crc32_pclmul igb crc32c_intel libata ghash_clmulni_intel i2c_algo_bit mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod fuse [ +0.000050] CPU: 0 PID: 937 Comm: kworker/0:3 Kdump: loaded Not tainted 6.8.0-rc2-Feb-net_dev-Qiueue-00279-gbd43c5687e05 #1 [ +0.000003] Hardware name: Intel Corporation S2600BPB/S2600BPB, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 [ +0.000001] Workqueue: i40e i40e_service_task [i40e] [ +0.000024] RIP: 0010:check_flush_dependency+0x10b/0x120 [ +0.000003] Code: ff 49 8b 54 24 18 48 8d 8b b0 00 00 00 49 89 e8 48 81 c6 b0 00 00 00 48 c7 c7 b0 97 fa 9f c6 05 8a cc 1f 02 01 e8 35 b3 fd ff <0f> 0b e9 10 ff ff ff 80 3d 78 cc 1f 02 00 75 94 e9 46 ff ff ff 90 [ +0.000002] RSP: 0018:ffffbd294976bcf8 EFLAGS: 00010282 [ +0.000002] RAX: 0000000000000000 RBX: ffff94d4c483c000 RCX: 0000000000000027 [ +0.000001] RDX: ffff94d47f620bc8 RSI: 0000000000000001 RDI: ffff94d47f620bc0 [ +0.000001] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffff7fff [ +0.000001] R10: ffffbd294976bb98 R11: ffffffffa0be65e8 R12: ffff94c5451ea180 [ +0.000001] R13: ffff94c5ab5e8000 R14: ffff94c5c20b6e05 R15: ffff94c5f1330ab0 [ +0.000001] FS: 0000000000000000(0000) GS:ffff94d47f600000(0000) knlGS:0000000000000000 [ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007f9e6f1fca70 CR3: 0000000038e20004 CR4: 00000000007706f0 [ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] [ +0.000002] ? __warn+0x80/0x130 [ +0.000003] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? report_bug+0x195/0x1a0 [ +0.000005] ? handle_bug+0x3c/0x70 [ +0.000003] ? exc_invalid_op+0x14/0x70 [ +0.000002] ? asm_exc_invalid_op+0x16/0x20 [ +0.000006] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? check_flush_dependency+0x10b/0x120 [ +0.000002] __flush_workqueue+0x126/0x3f0 [ +0.000015] ib_cache_cleanup_one+0x1c/0xe0 [ib_core] [ +0.000056] __ib_unregister_device+0x6a/0xb0 [ib_core] [ +0.000023] ib_unregister_device_and_put+0x34/0x50 [ib_core] [ +0.000020] i40iw_close+0x4b/0x90 [irdma] [ +0.000022] i40e_notify_client_of_netdev_close+0x54/0xc0 [i40e] [ +0.000035] i40e_service_task+0x126/0x190 [i40e] [ +0.000024] process_one_work+0x174/0x340 [ +0.000003] worker_thread+0x27e/0x390 [ +0.000001] ? __pfx_worker_thread+0x10/0x10 [ +0.000002] kthread+0xdf/0x110 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000002] ret_from_fork+0x2d/0x50 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000001] ret_from_fork_asm+0x1b/0x30 [ +0.000004] [ +0.000001] ---[ end trace 0000000000000000 ]--- Fixes: 4d5957cbdecd ("i40e: remove WQ_UNBOUND and the task limit of our workqueue") Signed-off-by: Sindhu Devale Reviewed-by: Arkadiusz Kubalewski Reviewed-by: Mateusz Polchlopek Signed-off-by: Aleksandr Loktionov Tested-by: Robert Ganzynkowicz Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20240423182723.740401-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 491e5c776306..3c9b28b7b507 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -14728,7 +14728,7 @@ static int __init i40e_init_module(void) * since we need to be able to guarantee forward progress even under * memory pressure. */ - i40e_wq = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0, i40e_driver_name); + i40e_wq = alloc_workqueue("%s", 0, 0, i40e_driver_name); if (!i40e_wq) { pr_err("%s: Failed to create workqueue\n", i40e_driver_name); return -ENOMEM; From dcc8ed283f841e217ad23a65453f7b8c6068d6c5 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 14 Sep 2023 20:43:18 +0206 Subject: [PATCH 53/78] serial: core: Provide port lock wrappers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit b0af4bcb49464c221ad5f95d40f2b1b252ceedcc ] When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. Provide wrapper functions for spin_[un]lock*(port->lock) invocations so that the console mechanics can be applied later on at a single place and does not require to copy the same logic all over the drivers. Signed-off-by: Thomas Gleixner Reviewed-by: Ilpo Järvinen Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-2-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 54c4ec5f8c47 ("serial: mxs-auart: add spinlock around changing cts state") Signed-off-by: Sasha Levin --- include/linux/serial_core.h | 79 +++++++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index af8143fb644c..22735ba8c19c 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -264,6 +264,85 @@ struct uart_port { void *private_data; /* generic platform data pointer */ }; +/** + * uart_port_lock - Lock the UART port + * @up: Pointer to UART port structure + */ +static inline void uart_port_lock(struct uart_port *up) +{ + spin_lock(&up->lock); +} + +/** + * uart_port_lock_irq - Lock the UART port and disable interrupts + * @up: Pointer to UART port structure + */ +static inline void uart_port_lock_irq(struct uart_port *up) +{ + spin_lock_irq(&up->lock); +} + +/** + * uart_port_lock_irqsave - Lock the UART port, save and disable interrupts + * @up: Pointer to UART port structure + * @flags: Pointer to interrupt flags storage + */ +static inline void uart_port_lock_irqsave(struct uart_port *up, unsigned long *flags) +{ + spin_lock_irqsave(&up->lock, *flags); +} + +/** + * uart_port_trylock - Try to lock the UART port + * @up: Pointer to UART port structure + * + * Returns: True if lock was acquired, false otherwise + */ +static inline bool uart_port_trylock(struct uart_port *up) +{ + return spin_trylock(&up->lock); +} + +/** + * uart_port_trylock_irqsave - Try to lock the UART port, save and disable interrupts + * @up: Pointer to UART port structure + * @flags: Pointer to interrupt flags storage + * + * Returns: True if lock was acquired, false otherwise + */ +static inline bool uart_port_trylock_irqsave(struct uart_port *up, unsigned long *flags) +{ + return spin_trylock_irqsave(&up->lock, *flags); +} + +/** + * uart_port_unlock - Unlock the UART port + * @up: Pointer to UART port structure + */ +static inline void uart_port_unlock(struct uart_port *up) +{ + spin_unlock(&up->lock); +} + +/** + * uart_port_unlock_irq - Unlock the UART port and re-enable interrupts + * @up: Pointer to UART port structure + */ +static inline void uart_port_unlock_irq(struct uart_port *up) +{ + spin_unlock_irq(&up->lock); +} + +/** + * uart_port_lock_irqrestore - Unlock the UART port, restore interrupts + * @up: Pointer to UART port structure + * @flags: The saved interrupt flags for restore + */ +static inline void uart_port_unlock_irqrestore(struct uart_port *up, unsigned long flags) +{ + spin_unlock_irqrestore(&up->lock, flags); +} + static inline int serial_port_in(struct uart_port *up, int offset) { return up->serial_in(up, offset); From 56434e295bd446142025913bfdf1587f5e1970ad Mon Sep 17 00:00:00 2001 From: Emil Kronborg Date: Wed, 20 Mar 2024 12:15:36 +0000 Subject: [PATCH 54/78] serial: mxs-auart: add spinlock around changing cts state [ Upstream commit 54c4ec5f8c471b7c1137a1f769648549c423c026 ] The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec [ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs [ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1 [ 85.151396] Hardware name: Freescale MXS (Device Tree) [ 85.156679] Workqueue: hci0 hci_power_on [bluetooth] (...) [ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4 [ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210 (...) Cc: stable@vger.kernel.org Fixes: 4d90bb147ef6 ("serial: core: Document and assert lock requirements for irq helpers") Reviewed-by: Frank Li Signed-off-by: Emil Kronborg Link: https://lore.kernel.org/r/20240320121530.11348-1-emil.kronborg@protonmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/mxs-auart.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 63810eefa44b..9ac2f21be8d7 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1128,11 +1128,13 @@ static void mxs_auart_set_ldisc(struct uart_port *port, static irqreturn_t mxs_auart_irq_handle(int irq, void *context) { - u32 istat; + u32 istat, stat; struct mxs_auart_port *s = context; u32 mctrl_temp = s->mctrl_prev; - u32 stat = mxs_read(s, REG_STAT); + uart_port_lock(&s->port); + + stat = mxs_read(s, REG_STAT); istat = mxs_read(s, REG_INTR); /* ack irq */ @@ -1168,6 +1170,8 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context) istat &= ~AUART_INTR_TXIS; } + uart_port_unlock(&s->port); + return IRQ_HANDLED; } From 605134e35a72a8cf1ff1cf433664a2b4a4924488 Mon Sep 17 00:00:00 2001 From: Rajneesh Bhardwaj Date: Sat, 25 Apr 2020 01:01:12 -0400 Subject: [PATCH 55/78] drm/amdgpu: restrict bo mapping within gpu address limits MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 8b80d74bdb2285d3022b349c8451eb16535f7906 ] Have strict check on bo mapping since on some systems, such as A+A or hybrid, the cpu might support 5 level paging or can address memory above 48 bits but gpu might be limited by hardware to just use 48 bits. In general, this applies to all asics where this limitation can be checked against their max_pfn range. This restricts the range to map bo within pratical limits of cpu and gpu for shared virtual memory access. Reviewed-by: Oak Zeng Reviewed-by: Christian König Reviewed-by: Hawking Zhang Acked-by: Alex Deucher Signed-off-by: Rajneesh Bhardwaj Signed-off-by: Alex Deucher Stable-dep-of: 6fef2d4c00b5 ("drm/amdgpu: validate the parameters of bo mapping operations more clearly") Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index cdcf9e697c39..acf03c716aca 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -2083,7 +2083,8 @@ int amdgpu_vm_bo_map(struct amdgpu_device *adev, /* make sure object fit at this offset */ eaddr = saddr + size - 1; if (saddr >= eaddr || - (bo && offset + size > amdgpu_bo_size(bo))) + (bo && offset + size > amdgpu_bo_size(bo)) || + (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT)) return -EINVAL; saddr /= AMDGPU_GPU_PAGE_SIZE; @@ -2148,7 +2149,8 @@ int amdgpu_vm_bo_replace_map(struct amdgpu_device *adev, /* make sure object fit at this offset */ eaddr = saddr + size - 1; if (saddr >= eaddr || - (bo && offset + size > amdgpu_bo_size(bo))) + (bo && offset + size > amdgpu_bo_size(bo)) || + (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT)) return -EINVAL; /* Allocate all the needed memory */ From 82aace80cfaab778245bd2f9e31b67953725e4d0 Mon Sep 17 00:00:00 2001 From: Chia-I Wu Date: Thu, 1 Jun 2023 15:44:12 -0700 Subject: [PATCH 56/78] amdgpu: validate offset_in_bo of drm_amdgpu_gem_va MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 9f0bcf49e9895cb005d78b33a5eebfa11711b425 ] This is motivated by OOB access in amdgpu_vm_update_range when offset_in_bo+map_size overflows. v2: keep the validations in amdgpu_vm_bo_map v3: add the validations to amdgpu_vm_bo_map/amdgpu_vm_bo_replace_map rather than to amdgpu_gem_va_ioctl Fixes: 9f7eb5367d00 ("drm/amdgpu: actually use the VM map parameters") Reviewed-by: Christian König Signed-off-by: Chia-I Wu Signed-off-by: Alex Deucher Stable-dep-of: 6fef2d4c00b5 ("drm/amdgpu: validate the parameters of bo mapping operations more clearly") Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index acf03c716aca..aa972448284d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -2076,14 +2076,14 @@ int amdgpu_vm_bo_map(struct amdgpu_device *adev, uint64_t eaddr; /* validate the parameters */ - if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || - size == 0 || size & ~PAGE_MASK) + if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || size & ~PAGE_MASK) + return -EINVAL; + if (saddr + size <= saddr || offset + size <= offset) return -EINVAL; /* make sure object fit at this offset */ eaddr = saddr + size - 1; - if (saddr >= eaddr || - (bo && offset + size > amdgpu_bo_size(bo)) || + if ((bo && offset + size > amdgpu_bo_size(bo)) || (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT)) return -EINVAL; @@ -2142,14 +2142,14 @@ int amdgpu_vm_bo_replace_map(struct amdgpu_device *adev, int r; /* validate the parameters */ - if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || - size == 0 || size & ~PAGE_MASK) + if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || size & ~PAGE_MASK) + return -EINVAL; + if (saddr + size <= saddr || offset + size <= offset) return -EINVAL; /* make sure object fit at this offset */ eaddr = saddr + size - 1; - if (saddr >= eaddr || - (bo && offset + size > amdgpu_bo_size(bo)) || + if ((bo && offset + size > amdgpu_bo_size(bo)) || (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT)) return -EINVAL; From d4da6b084f1c5625937d49bb6722c5b4aef11b8d Mon Sep 17 00:00:00 2001 From: xinhui pan Date: Thu, 11 Apr 2024 11:11:38 +0800 Subject: [PATCH 57/78] drm/amdgpu: validate the parameters of bo mapping operations more clearly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 6fef2d4c00b5b8561ad68dd2b68173f5c6af1e75 ] Verify the parameters of amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place. Fixes: dc54d3d1744d ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2") Cc: stable@vger.kernel.org Reported-by: Vlad Stolyarov Suggested-by: Christian König Signed-off-by: xinhui pan Reviewed-by: Christian König Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 72 ++++++++++++++++---------- 1 file changed, 46 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index aa972448284d..7fd0343518a9 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -2048,6 +2048,37 @@ static void amdgpu_vm_bo_insert_map(struct amdgpu_device *adev, trace_amdgpu_vm_bo_map(bo_va, mapping); } +/* Validate operation parameters to prevent potential abuse */ +static int amdgpu_vm_verify_parameters(struct amdgpu_device *adev, + struct amdgpu_bo *bo, + uint64_t saddr, + uint64_t offset, + uint64_t size) +{ + uint64_t tmp, lpfn; + + if (saddr & AMDGPU_GPU_PAGE_MASK + || offset & AMDGPU_GPU_PAGE_MASK + || size & AMDGPU_GPU_PAGE_MASK) + return -EINVAL; + + if (check_add_overflow(saddr, size, &tmp) + || check_add_overflow(offset, size, &tmp) + || size == 0 /* which also leads to end < begin */) + return -EINVAL; + + /* make sure object fit at this offset */ + if (bo && offset + size > amdgpu_bo_size(bo)) + return -EINVAL; + + /* Ensure last pfn not exceed max_pfn */ + lpfn = (saddr + size - 1) >> AMDGPU_GPU_PAGE_SHIFT; + if (lpfn >= adev->vm_manager.max_pfn) + return -EINVAL; + + return 0; +} + /** * amdgpu_vm_bo_map - map bo inside a vm * @@ -2074,21 +2105,14 @@ int amdgpu_vm_bo_map(struct amdgpu_device *adev, struct amdgpu_bo *bo = bo_va->base.bo; struct amdgpu_vm *vm = bo_va->base.vm; uint64_t eaddr; + int r; - /* validate the parameters */ - if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || size & ~PAGE_MASK) - return -EINVAL; - if (saddr + size <= saddr || offset + size <= offset) - return -EINVAL; - - /* make sure object fit at this offset */ - eaddr = saddr + size - 1; - if ((bo && offset + size > amdgpu_bo_size(bo)) || - (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT)) - return -EINVAL; + r = amdgpu_vm_verify_parameters(adev, bo, saddr, offset, size); + if (r) + return r; saddr /= AMDGPU_GPU_PAGE_SIZE; - eaddr /= AMDGPU_GPU_PAGE_SIZE; + eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE; tmp = amdgpu_vm_it_iter_first(&vm->va, saddr, eaddr); if (tmp) { @@ -2141,17 +2165,9 @@ int amdgpu_vm_bo_replace_map(struct amdgpu_device *adev, uint64_t eaddr; int r; - /* validate the parameters */ - if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || size & ~PAGE_MASK) - return -EINVAL; - if (saddr + size <= saddr || offset + size <= offset) - return -EINVAL; - - /* make sure object fit at this offset */ - eaddr = saddr + size - 1; - if ((bo && offset + size > amdgpu_bo_size(bo)) || - (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT)) - return -EINVAL; + r = amdgpu_vm_verify_parameters(adev, bo, saddr, offset, size); + if (r) + return r; /* Allocate all the needed memory */ mapping = kmalloc(sizeof(*mapping), GFP_KERNEL); @@ -2165,7 +2181,7 @@ int amdgpu_vm_bo_replace_map(struct amdgpu_device *adev, } saddr /= AMDGPU_GPU_PAGE_SIZE; - eaddr /= AMDGPU_GPU_PAGE_SIZE; + eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE; mapping->start = saddr; mapping->last = eaddr; @@ -2252,10 +2268,14 @@ int amdgpu_vm_bo_clear_mappings(struct amdgpu_device *adev, struct amdgpu_bo_va_mapping *before, *after, *tmp, *next; LIST_HEAD(removed); uint64_t eaddr; + int r; + + r = amdgpu_vm_verify_parameters(adev, NULL, saddr, 0, size); + if (r) + return r; - eaddr = saddr + size - 1; saddr /= AMDGPU_GPU_PAGE_SIZE; - eaddr /= AMDGPU_GPU_PAGE_SIZE; + eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE; /* Allocate all the needed memory */ before = kzalloc(sizeof(*before), GFP_KERNEL); From 69dc8fc8307640b717b37056549d88a664273206 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Apr 2024 12:53:46 +0200 Subject: [PATCH 58/78] Revert "crypto: api - Disallow identical driver names" This reverts commit 15a67115d487ea5cb8213915a4f75f58adb87cbc which is commit 27016f75f5ed47e2d8e0ca75a8ff1f40bc1a5e27 upstream. It is reported to cause problems in older kernels due to some crypto drivers having the same name, so revert it here to fix the problems. Link: https://lore.kernel.org/r/aceda6e2-cefb-4146-aef8-ff4bafa56e56@roeck-us.net Reported-by: Guenter Roeck Cc: Ovidiu Panait Cc: Herbert Xu Signed-off-by: Greg Kroah-Hartman --- crypto/algapi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/crypto/algapi.c b/crypto/algapi.c index a1ceca922841..346557a3fc0b 100644 --- a/crypto/algapi.c +++ b/crypto/algapi.c @@ -231,7 +231,6 @@ static struct crypto_larval *__crypto_register_alg(struct crypto_alg *alg) } if (!strcmp(q->cra_driver_name, alg->cra_name) || - !strcmp(q->cra_driver_name, alg->cra_driver_name) || !strcmp(q->cra_name, alg->cra_driver_name)) goto err; } From 78b92d50fe6ab79d536f4b12c5bde15f2751414d Mon Sep 17 00:00:00 2001 From: "Robin H. Johnson" Date: Mon, 30 Aug 2021 21:37:22 -0700 Subject: [PATCH 59/78] tracing: Show size of requested perf buffer commit a90afe8d020da9298c98fddb19b7a6372e2feb45 upstream. If the perf buffer isn't large enough, provide a hint about how large it needs to be for whatever is running. Link: https://lkml.kernel.org/r/20210831043723.13481-1-robbat2@gentoo.org Signed-off-by: Robin H. Johnson Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman Signed-off-by: Thadeu Lima de Souza Cascardo --- kernel/trace/trace_event_perf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c index f5b3bf0e69f6..5e68447588b7 100644 --- a/kernel/trace/trace_event_perf.c +++ b/kernel/trace/trace_event_perf.c @@ -394,7 +394,8 @@ void *perf_trace_buf_alloc(int size, struct pt_regs **regs, int *rctxp) BUILD_BUG_ON(PERF_MAX_TRACE_SIZE % sizeof(unsigned long)); if (WARN_ONCE(size > PERF_MAX_TRACE_SIZE, - "perf buffer not large enough")) + "perf buffer not large enough, wanted %d, have %d", + size, PERF_MAX_TRACE_SIZE)) return NULL; *rctxp = rctx = perf_swevent_get_recursion_context(); From c8d5402dcd1834747bb3dbd9b6fe51defd3d636b Mon Sep 17 00:00:00 2001 From: "Robin H. Johnson" Date: Mon, 30 Aug 2021 21:37:23 -0700 Subject: [PATCH 60/78] tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together commit e531e90b5ab0f7ce5ff298e165214c1aec6ed187 upstream. Running endpoint security solutions like Sentinel1 that use perf-based tracing heavily lead to this repeated dump complaining about dockerd. The default value of 2048 is nowhere near not large enough. Using the prior patch "tracing: show size of requested buffer", we get "perf buffer not large enough, wanted 6644, have 6144", after repeated up-sizing (I did 2/4/6/8K). With 8K, the problem doesn't occur at all, so below is the trace for 6K. I'm wondering if this value should be selectable at boot time, but this is a good starting point. ``` ------------[ cut here ]------------ perf buffer not large enough, wanted 6644, have 6144 WARNING: CPU: 1 PID: 4997 at kernel/trace/trace_event_perf.c:402 perf_trace_buf_alloc+0x8c/0xa0 Modules linked in: [..] CPU: 1 PID: 4997 Comm: sh Tainted: G T 5.13.13-x86_64-00039-gb3959163488e #63 Hardware name: LENOVO 20KH002JUS/20KH002JUS, BIOS N23ET66W (1.41 ) 09/02/2019 RIP: 0010:perf_trace_buf_alloc+0x8c/0xa0 Code: 80 3d 43 97 d0 01 00 74 07 31 c0 5b 5d 41 5c c3 ba 00 18 00 00 89 ee 48 c7 c7 00 82 7d 91 c6 05 25 97 d0 01 01 e8 22 ee bc 00 <0f> 0b 31 c0 eb db 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 55 89 RSP: 0018:ffffb922026b7d58 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9da5ee012000 RCX: 0000000000000027 RDX: ffff9da881657828 RSI: 0000000000000001 RDI: ffff9da881657820 RBP: 00000000000019f4 R08: 0000000000000000 R09: ffffb922026b7b80 R10: ffffb922026b7b78 R11: ffffffff91dda688 R12: 000000000000000f R13: ffff9da5ee012108 R14: ffff9da8816570a0 R15: ffffb922026b7e30 FS: 00007f420db1a080(0000) GS:ffff9da881640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 00000002504a8006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: kprobe_perf_func+0x11e/0x270 ? do_execveat_common.isra.0+0x1/0x1c0 ? do_execveat_common.isra.0+0x5/0x1c0 kprobe_ftrace_handler+0x10e/0x1d0 0xffffffffc03aa0c8 ? do_execveat_common.isra.0+0x1/0x1c0 do_execveat_common.isra.0+0x5/0x1c0 __x64_sys_execve+0x33/0x40 do_syscall_64+0x6b/0xc0 ? do_syscall_64+0x11/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f420dc1db37 Code: ff ff 76 e7 f7 d8 64 41 89 00 eb df 0f 1f 80 00 00 00 00 f7 d8 64 41 89 00 eb dc 0f 1f 84 00 00 00 00 00 b8 3b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 01 43 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd4e8b4e38 EFLAGS: 00000246 ORIG_RAX: 000000000000003b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f420dc1db37 RDX: 0000564338d1e740 RSI: 0000564338d32d50 RDI: 0000564338d28f00 RBP: 0000564338d28f00 R08: 0000564338d32d50 R09: 0000000000000020 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000564338d28f00 R13: 0000564338d32d50 R14: 0000564338d1e740 R15: 0000564338d28c60 ---[ end trace 83ab3e8e16275e49 ]--- ``` Link: https://lkml.kernel.org/r/20210831043723.13481-2-robbat2@gentoo.org Signed-off-by: Robin H. Johnson Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman --- include/linux/trace_events.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/trace_events.h b/include/linux/trace_events.h index 93a1b5497bdf..755daada7def 100644 --- a/include/linux/trace_events.h +++ b/include/linux/trace_events.h @@ -414,7 +414,7 @@ struct trace_event_file { } \ early_initcall(trace_init_perf_perm_##name); -#define PERF_MAX_TRACE_SIZE 2048 +#define PERF_MAX_TRACE_SIZE 8192 #define MAX_FILTER_STR_VAL 256 /* Should handle KSYM_SYMBOL_LEN */ From 92d26492b4acdc05a3ad1f7795b6cae91292b00d Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Mon, 1 Apr 2024 11:24:17 -0700 Subject: [PATCH 61/78] Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old() commit 9bf4e919ccad613b3596eebf1ff37b05b6405307 upstream. After an innocuous optimization change in LLVM main (19.0.0), x86_64 allmodconfig (which enables CONFIG_KCSAN / -fsanitize=thread) fails to build due to the checks in check_copy_size(): In file included from net/bluetooth/sco.c:27: In file included from include/linux/module.h:13: In file included from include/linux/stat.h:19: In file included from include/linux/time.h:60: In file included from include/linux/time32.h:13: In file included from include/linux/timex.h:67: In file included from arch/x86/include/asm/timex.h:6: In file included from arch/x86/include/asm/tsc.h:10: In file included from arch/x86/include/asm/msr.h:15: In file included from include/linux/percpu.h:7: In file included from include/linux/smp.h:118: include/linux/thread_info.h:244:4: error: call to '__bad_copy_from' declared with 'error' attribute: copy source size is too small 244 | __bad_copy_from(); | ^ The same exact error occurs in l2cap_sock.c. The copy_to_user() statements that are failing come from l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This does not occur with GCC with or without KCSAN or Clang without KCSAN enabled. len is defined as an 'int' because it is assigned from '__user int *optlen'. However, it is clamped against the result of sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit platforms). This is done with min_t() because min() requires compatible types, which results in both len and the result of sizeof() being casted to 'unsigned int', meaning len changes signs and the result of sizeof() is truncated. From there, len is passed to copy_to_user(), which has a third parameter type of 'unsigned long', so it is widened and changes signs again. This excessive casting in combination with the KCSAN instrumentation causes LLVM to fail to eliminate the __bad_copy_from() call, failing the build. The official recommendation from LLVM developers is to consistently use long types for all size variables to avoid the unnecessary casting in the first place. Change the type of len to size_t in both l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This clears up the error while allowing min_t() to be replaced with min(), resulting in simpler code with no casts and fewer implicit conversions. While len is a different type than optlen now, it should result in no functional change because the result of sizeof() will clamp all values of optlen in the same manner as before. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/2007 Link: https://github.com/llvm/llvm-project/issues/85647 Signed-off-by: Nathan Chancellor Reviewed-by: Justin Stitt Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman --- net/bluetooth/l2cap_sock.c | 7 ++++--- net/bluetooth/sco.c | 7 ++++--- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index b831e5fe3ebc..8dcd3af05d9f 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -405,7 +405,8 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname, struct l2cap_chan *chan = l2cap_pi(sk)->chan; struct l2cap_options opts; struct l2cap_conninfo cinfo; - int len, err = 0; + int err = 0; + size_t len; u32 opt; BT_DBG("sk %p", sk); @@ -436,7 +437,7 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname, opts.max_tx = chan->max_tx; opts.txwin_size = chan->tx_win; - len = min_t(unsigned int, len, sizeof(opts)); + len = min(len, sizeof(opts)); if (copy_to_user(optval, (char *) &opts, len)) err = -EFAULT; @@ -486,7 +487,7 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname, cinfo.hci_handle = chan->conn->hcon->handle; memcpy(cinfo.dev_class, chan->conn->hcon->dev_class, 3); - len = min_t(unsigned int, len, sizeof(cinfo)); + len = min(len, sizeof(cinfo)); if (copy_to_user(optval, (char *) &cinfo, len)) err = -EFAULT; diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index ee321d62b7d6..d8726327bc05 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -880,7 +880,8 @@ static int sco_sock_getsockopt_old(struct socket *sock, int optname, struct sock *sk = sock->sk; struct sco_options opts; struct sco_conninfo cinfo; - int len, err = 0; + int err = 0; + size_t len; BT_DBG("sk %p", sk); @@ -902,7 +903,7 @@ static int sco_sock_getsockopt_old(struct socket *sock, int optname, BT_DBG("mtu %d", opts.mtu); - len = min_t(unsigned int, len, sizeof(opts)); + len = min(len, sizeof(opts)); if (copy_to_user(optval, (char *)&opts, len)) err = -EFAULT; @@ -920,7 +921,7 @@ static int sco_sock_getsockopt_old(struct socket *sock, int optname, cinfo.hci_handle = sco_pi(sk)->conn->hcon->handle; memcpy(cinfo.dev_class, sco_pi(sk)->conn->hcon->dev_class, 3); - len = min_t(unsigned int, len, sizeof(cinfo)); + len = min(len, sizeof(cinfo)); if (copy_to_user(optval, (char *)&cinfo, len)) err = -EFAULT; From 689efe22e9b5b7d9d523119a9a5c3c17107a0772 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Wed, 17 Apr 2024 10:45:47 +0200 Subject: [PATCH 62/78] btrfs: fix information leak in btrfs_ioctl_logical_to_ino() commit 2f7ef5bb4a2f3e481ef05fab946edb97c84f67cf upstream. Syzbot reported the following information leak for in btrfs_ioctl_logical_to_ino(): BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x110 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x110 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] btrfs_ioctl_logical_to_ino+0x440/0x750 fs/btrfs/ioctl.c:3499 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: __kmalloc_large_node+0x231/0x370 mm/slub.c:3921 __do_kmalloc_node mm/slub.c:3954 [inline] __kmalloc_node+0xb07/0x1060 mm/slub.c:3973 kmalloc_node include/linux/slab.h:648 [inline] kvmalloc_node+0xc0/0x2d0 mm/util.c:634 kvmalloc include/linux/slab.h:766 [inline] init_data_container+0x49/0x1e0 fs/btrfs/backref.c:2779 btrfs_ioctl_logical_to_ino+0x17c/0x750 fs/btrfs/ioctl.c:3480 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 40-65535 of 65536 are uninitialized Memory access of size 65536 starts at ffff888045a40000 This happens, because we're copying a 'struct btrfs_data_container' back to user-space. This btrfs_data_container is allocated in 'init_data_container()' via kvmalloc(), which does not zero-fill the memory. Fix this by using kvzalloc() which zeroes out the memory on allocation. CC: stable@vger.kernel.org # 4.14+ Reported-by: Reviewed-by: Qu Wenruo Reviewed-by: Filipe Manana Signed-off-by: Johannes Thumshirn Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/backref.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index a1eb573fbb10..32570c866ca9 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -2236,20 +2236,14 @@ struct btrfs_data_container *init_data_container(u32 total_bytes) size_t alloc_bytes; alloc_bytes = max_t(size_t, total_bytes, sizeof(*data)); - data = kvmalloc(alloc_bytes, GFP_KERNEL); + data = kvzalloc(alloc_bytes, GFP_KERNEL); if (!data) return ERR_PTR(-ENOMEM); - if (total_bytes >= sizeof(*data)) { + if (total_bytes >= sizeof(*data)) data->bytes_left = total_bytes - sizeof(*data); - data->bytes_missing = 0; - } else { + else data->bytes_missing = sizeof(*data) - total_bytes; - data->bytes_left = 0; - } - - data->elem_cnt = 0; - data->elem_missed = 0; return data; } From 6d5692510d683ab57f81f82fd3d5282e33dd416f Mon Sep 17 00:00:00 2001 From: Iskander Amara Date: Fri, 8 Mar 2024 09:52:42 +0100 Subject: [PATCH 63/78] arm64: dts: rockchip: enable internal pull-up for Q7_THRM# on RK3399 Puma commit 0ac417b8f124427c90ec8c2ef4f632b821d924cc upstream. Q7_THRM# pin is connected to a diode on the module which is used as a level shifter, and the pin have a pull-down enabled by default. We need to configure it to internal pull-up, other- wise whenever the pin is configured as INPUT and we try to control it externally the value will always remain zero. Signed-off-by: Iskander Amara Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Reviewed-by: Quentin Schulz Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240308085243.69903-1-iskander.amara@theobroma-systems.com Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 1c9b4a955708..a0470f014e56 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -432,6 +432,16 @@ }; &pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&q7_thermal_pin>; + + gpios { + q7_thermal_pin: q7-thermal-pin { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + i2c8 { i2c8_xfer_a: i2c8-xfer { rockchip,pins = From f5417ff561b8ac9a7e53c747b8627a7ab58378ae Mon Sep 17 00:00:00 2001 From: Guanrui Huang Date: Thu, 18 Apr 2024 14:10:52 +0800 Subject: [PATCH 64/78] irqchip/gic-v3-its: Prevent double free on error commit c26591afd33adce296c022e3480dea4282b7ef91 upstream. The error handling path in its_vpe_irq_domain_alloc() causes a double free when its_vpe_init() fails after successfully allocating at least one interrupt. This happens because its_vpe_irq_domain_free() frees the interrupts along with the area bitmap and the vprop_page and its_vpe_irq_domain_alloc() subsequently frees the area bitmap and the vprop_page again. Fix this by unconditionally invoking its_vpe_irq_domain_free() which handles all cases correctly and by removing the bitmap/vprop_page freeing from its_vpe_irq_domain_alloc(). [ tglx: Massaged change log ] Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown") Signed-off-by: Guanrui Huang Signed-off-by: Thomas Gleixner Reviewed-by: Marc Zyngier Reviewed-by: Zenghui Yu Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240418061053.96803-2-guanrui.huang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman --- drivers/irqchip/irq-gic-v3-its.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 86334aef4bd0..6b58194c1e34 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -2994,13 +2994,8 @@ static int its_vpe_irq_domain_alloc(struct irq_domain *domain, unsigned int virq set_bit(i, bitmap); } - if (err) { - if (i > 0) - its_vpe_irq_domain_free(domain, virq, i); - - its_lpi_free(bitmap, base, nr_ids); - its_free_prop_table(vprop_page); - } + if (err) + its_vpe_irq_domain_free(domain, virq, i); return err; } From 1aeede3a0217741120725c4c9cebf039c6fff7ef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Peter=20M=C3=BCnster?= Date: Wed, 24 Apr 2024 15:51:52 +0200 Subject: [PATCH 65/78] net: b44: set pause params only when interface is up MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit e3eb7dd47bd4806f00e104eb6da092c435f9fb21 upstream. b44_free_rings() accesses b44::rx_buffers (and ::tx_buffers) unconditionally, but b44::rx_buffers is only valid when the device is up (they get allocated in b44_open(), and deallocated again in b44_close()), any other time these are just a NULL pointers. So if you try to change the pause params while the network interface is disabled/administratively down, everything explodes (which likely netifd tries to do). Link: https://github.com/openwrt/openwrt/issues/13789 Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Cc: stable@vger.kernel.org Reported-by: Peter Münster Suggested-by: Jonas Gorski Signed-off-by: Vaclav Svoboda Tested-by: Peter Münster Reviewed-by: Andrew Lunn Signed-off-by: Peter Münster Reviewed-by: Michael Chan Link: https://lore.kernel.org/r/87y192oolj.fsf@a16n.net Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/broadcom/b44.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 7aeb2805fec4..e5f76f4fd537 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -2033,12 +2033,14 @@ static int b44_set_pauseparam(struct net_device *dev, bp->flags |= B44_FLAG_TX_PAUSE; else bp->flags &= ~B44_FLAG_TX_PAUSE; - if (bp->flags & B44_FLAG_PAUSE_AUTO) { - b44_halt(bp); - b44_init_rings(bp); - b44_init_hw(bp, B44_FULL_RESET); - } else { - __b44_set_flow_ctrl(bp, bp->flags); + if (netif_running(dev)) { + if (bp->flags & B44_FLAG_PAUSE_AUTO) { + b44_halt(bp); + b44_init_rings(bp); + b44_init_hw(bp, B44_FULL_RESET); + } else { + __b44_set_flow_ctrl(bp, bp->flags); + } } spin_unlock_irq(&bp->lock); From 79b25b1a58d0a6b53dfd685bca8a1984c86710dd Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Thu, 18 Apr 2024 16:11:33 +0200 Subject: [PATCH 66/78] stackdepot: respect __GFP_NOLOCKDEP allocation flag commit 6fe60465e1d53ea321ee909be26d97529e8f746c upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ #49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016e5f52 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin Reported-by: Xiubo Li Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner Tested-by: Xiubo Li Cc: Christoph Hellwig Cc: Alexander Potapenko Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- lib/stackdepot.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/stackdepot.c b/lib/stackdepot.c index d0f1b7d0ce2e..8db494a94658 100644 --- a/lib/stackdepot.c +++ b/lib/stackdepot.c @@ -256,10 +256,10 @@ depot_stack_handle_t depot_save_stack(struct stack_trace *trace, /* * Zero out zone modifiers, as we don't have specific zone * requirements. Keep the flags related to allocation in atomic - * contexts and I/O. + * contexts, I/O, nolockdep. */ alloc_flags &= ~GFP_ZONEMASK; - alloc_flags &= (GFP_ATOMIC | GFP_KERNEL); + alloc_flags &= (GFP_ATOMIC | GFP_KERNEL | __GFP_NOLOCKDEP); alloc_flags |= __GFP_NOWARN; page = alloc_pages(alloc_flags, STACK_ALLOC_ORDER); if (page) From 153adb5d7878d18e2b9be173996034f858fbce8e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 5 Apr 2024 16:30:04 +0200 Subject: [PATCH 67/78] mtd: diskonchip: work around ubsan link failure commit 21c9fb611c25d5cd038f6fe485232e7884bb0b3d upstream. I ran into a randconfig build failure with UBSAN using gcc-13.2: arm-linux-gnueabi-ld: error: unplaced orphan section `.bss..Lubsan_data31' from `drivers/mtd/nand/raw/diskonchip.o' I'm not entirely sure what is going on here, but I suspect this has something to do with the check for the end of the doc_locations[] array that contains an (unsigned long)0xffffffff element, which is compared against the signed (int)0xffffffff. If this is the case, we should get a runtime check for undefined behavior, but we instead get an unexpected build-time error. I would have expected this to work fine on 32-bit architectures despite the signed integer overflow, though on 64-bit architectures this likely won't ever work. Changing the contition to instead check for the size of the array makes the code safe everywhere and avoids the ubsan check that leads to the link error. The loop code goes back to before 2.6.12. Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20240405143015.717429-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/mtd/nand/raw/diskonchip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c index ac3792b6fb33..144a5d37cdf0 100644 --- a/drivers/mtd/nand/raw/diskonchip.c +++ b/drivers/mtd/nand/raw/diskonchip.c @@ -52,7 +52,7 @@ static unsigned long doc_locations[] __initdata = { 0xe8000, 0xea000, 0xec000, 0xee000, #endif #endif - 0xffffffff }; +}; static struct mtd_info *doclist = NULL; @@ -1678,7 +1678,7 @@ static int __init init_nanddoc(void) if (ret < 0) return ret; } else { - for (i = 0; (doc_locations[i] != 0xffffffff); i++) { + for (i = 0; i < ARRAY_SIZE(doc_locations); i++) { doc_probe(doc_locations[i]); } } From 9f06ebd1daf5914afb21b95781cf637a025e9f9a Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Wed, 12 Oct 2022 07:50:36 -0700 Subject: [PATCH 68/78] tcp: Clean up kernel listener's reqsk in inet_twsk_purge() commit 740ea3c4a0b2e326b23d7cdf05472a0e92aa39bc upstream. Eric Dumazet reported a use-after-free related to the per-netns ehash series. [0] When we create a TCP socket from userspace, the socket always holds a refcnt of the netns. This guarantees that a reqsk timer is always fired before netns dismantle. Each reqsk has a refcnt of its listener, so the listener is not freed before the reqsk, and the net is not freed before the listener as well. OTOH, when in-kernel users create a TCP socket, it might not hold a refcnt of its netns. Thus, a reqsk timer can be fired after the netns dismantle and access freed per-netns ehash. To avoid the use-after-free, we need to clean up TCP_NEW_SYN_RECV sockets in inet_twsk_purge() if the netns uses a per-netns ehash. [0]: https://lore.kernel.org/netdev/CANn89iLXMup0dRD_Ov79Xt8N9FM0XdhCHEN05sf3eLwxKweM6w@mail.gmail.com/ BUG: KASAN: use-after-free in tcp_or_dccp_get_hashinfo include/net/inet_hashtables.h:181 [inline] BUG: KASAN: use-after-free in reqsk_queue_unlink+0x320/0x350 net/ipv4/inet_connection_sock.c:913 Read of size 8 at addr ffff88807545bd80 by task syz-executor.2/8301 CPU: 1 PID: 8301 Comm: syz-executor.2 Not tainted 6.0.0-syzkaller-02757-gaf7d23f9d96a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x719 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 tcp_or_dccp_get_hashinfo include/net/inet_hashtables.h:181 [inline] reqsk_queue_unlink+0x320/0x350 net/ipv4/inet_connection_sock.c:913 inet_csk_reqsk_queue_drop net/ipv4/inet_connection_sock.c:927 [inline] inet_csk_reqsk_queue_drop_and_put net/ipv4/inet_connection_sock.c:939 [inline] reqsk_timer_handler+0x724/0x1160 net/ipv4/inet_connection_sock.c:1053 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790 __run_timers kernel/time/timer.c:1768 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1107 Fixes: d1e5e6408b30 ("tcp: Introduce optional per-netns ehash.") Reported-by: syzbot Reported-by: Eric Dumazet Suggested-by: Eric Dumazet Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20221012145036.74960-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski [shaozhengchao: resolved conflicts in 5.10] Signed-off-by: Zhengchao Shao Signed-off-by: Greg Kroah-Hartman --- net/ipv4/inet_timewait_sock.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c index 88c5069b5d20..0ab4e0e28baf 100644 --- a/net/ipv4/inet_timewait_sock.c +++ b/net/ipv4/inet_timewait_sock.c @@ -267,8 +267,21 @@ void inet_twsk_purge(struct inet_hashinfo *hashinfo, int family) rcu_read_lock(); restart: sk_nulls_for_each_rcu(sk, node, &head->chain) { - if (sk->sk_state != TCP_TIME_WAIT) + if (sk->sk_state != TCP_TIME_WAIT) { + /* A kernel listener socket might not hold refcnt for net, + * so reqsk_timer_handler() could be fired after net is + * freed. Userspace listener and reqsk never exist here. + */ + if (unlikely(sk->sk_state == TCP_NEW_SYN_RECV && + hashinfo->pernet)) { + struct request_sock *req = inet_reqsk(sk); + + inet_csk_reqsk_queue_drop_and_put(req->rsk_listener, req); + } + continue; + } + tw = inet_twsk(sk); if ((tw->tw_family != family) || refcount_read(&twsk_net(tw)->count)) From 4212fa80f700b06358a13cc7ea9d25788beff877 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 8 Mar 2024 12:01:21 -0800 Subject: [PATCH 69/78] tcp: Fix NEW_SYN_RECV handling in inet_twsk_purge() commit 1c4e97dd2d3c9a3e84f7e26346aa39bc426d3249 upstream. inet_twsk_purge() uses rcu to find TIME_WAIT and NEW_SYN_RECV objects to purge. These objects use SLAB_TYPESAFE_BY_RCU semantic and need special care. We need to use refcount_inc_not_zero(&sk->sk_refcnt). Reuse the existing correct logic I wrote for TIME_WAIT, because both structures have common locations for sk_state, sk_family, and netns pointer. If after the refcount_inc_not_zero() the object fields longer match the keys, use sock_gen_put(sk) to release the refcount. Then we can call inet_twsk_deschedule_put() for TIME_WAIT, inet_csk_reqsk_queue_drop_and_put() for NEW_SYN_RECV sockets, with BH disabled. Then we need to restart the loop because we had drop rcu_read_lock(). Fixes: 740ea3c4a0b2 ("tcp: Clean up kernel listener's reqsk in inet_twsk_purge()") Link: https://lore.kernel.org/netdev/CANn89iLvFuuihCtt9PME2uS1WJATnf5fKjDToa1WzVnRzHnPfg@mail.gmail.com/T/#u Signed-off-by: Eric Dumazet Link: https://lore.kernel.org/r/20240308200122.64357-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski [shaozhengchao: resolved conflicts in 5.10] Signed-off-by: Zhengchao Shao Signed-off-by: Greg Kroah-Hartman --- net/ipv4/inet_timewait_sock.c | 45 ++++++++++++++++------------------- 1 file changed, 21 insertions(+), 24 deletions(-) diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c index 0ab4e0e28baf..fc01efef980a 100644 --- a/net/ipv4/inet_timewait_sock.c +++ b/net/ipv4/inet_timewait_sock.c @@ -253,12 +253,12 @@ void __inet_twsk_schedule(struct inet_timewait_sock *tw, int timeo, bool rearm) } EXPORT_SYMBOL_GPL(__inet_twsk_schedule); +/* Remove all non full sockets (TIME_WAIT and NEW_SYN_RECV) for dead netns */ void inet_twsk_purge(struct inet_hashinfo *hashinfo, int family) { - struct inet_timewait_sock *tw; - struct sock *sk; struct hlist_nulls_node *node; unsigned int slot; + struct sock *sk; for (slot = 0; slot <= hashinfo->ehash_mask; slot++) { struct inet_ehash_bucket *head = &hashinfo->ehash[slot]; @@ -267,38 +267,35 @@ void inet_twsk_purge(struct inet_hashinfo *hashinfo, int family) rcu_read_lock(); restart: sk_nulls_for_each_rcu(sk, node, &head->chain) { - if (sk->sk_state != TCP_TIME_WAIT) { - /* A kernel listener socket might not hold refcnt for net, - * so reqsk_timer_handler() could be fired after net is - * freed. Userspace listener and reqsk never exist here. - */ - if (unlikely(sk->sk_state == TCP_NEW_SYN_RECV && - hashinfo->pernet)) { - struct request_sock *req = inet_reqsk(sk); + int state = inet_sk_state_load(sk); - inet_csk_reqsk_queue_drop_and_put(req->rsk_listener, req); - } - - continue; - } - - tw = inet_twsk(sk); - if ((tw->tw_family != family) || - refcount_read(&twsk_net(tw)->count)) + if ((1 << state) & ~(TCPF_TIME_WAIT | + TCPF_NEW_SYN_RECV)) continue; - if (unlikely(!refcount_inc_not_zero(&tw->tw_refcnt))) + if (sk->sk_family != family || + refcount_read(&sock_net(sk)->count)) continue; - if (unlikely((tw->tw_family != family) || - refcount_read(&twsk_net(tw)->count))) { - inet_twsk_put(tw); + if (unlikely(!refcount_inc_not_zero(&sk->sk_refcnt))) + continue; + + if (unlikely(sk->sk_family != family || + refcount_read(&sock_net(sk)->count))) { + sock_gen_put(sk); goto restart; } rcu_read_unlock(); local_bh_disable(); - inet_twsk_deschedule_put(tw); + if (state == TCP_TIME_WAIT) { + inet_twsk_deschedule_put(inet_twsk(sk)); + } else { + struct request_sock *req = inet_reqsk(sk); + + inet_csk_reqsk_queue_drop_and_put(req->rsk_listener, + req); + } local_bh_enable(); goto restart_rcu; } From 2628eb4bcc87953b3d10b5babde75853f38ad8fe Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 22 Mar 2024 14:21:07 +0100 Subject: [PATCH 70/78] dmaengine: owl: fix register access functions [ Upstream commit 43c633ef93a5d293c96ebcedb40130df13128428 ] When building with 'make W=1', clang notices that the computed register values are never actually written back but instead the wrong variable is set: drivers/dma/owl-dma.c:244:6: error: variable 'regval' set but not used [-Werror,-Wunused-but-set-variable] 244 | u32 regval; | ^ drivers/dma/owl-dma.c:268:6: error: variable 'regval' set but not used [-Werror,-Wunused-but-set-variable] 268 | u32 regval; | ^ Change these to what was most likely intended. Fixes: 47e20577c24d ("dmaengine: Add Actions Semi Owl family S900 DMA driver") Signed-off-by: Arnd Bergmann Reviewed-by: Peter Korsgaard Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20240322132116.906475-1-arnd@kernel.org Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/dma/owl-dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/owl-dma.c b/drivers/dma/owl-dma.c index da5050ab7f38..c12968075abc 100644 --- a/drivers/dma/owl-dma.c +++ b/drivers/dma/owl-dma.c @@ -230,7 +230,7 @@ static void pchan_update(struct owl_dma_pchan *pchan, u32 reg, else regval &= ~val; - writel(val, pchan->base + reg); + writel(regval, pchan->base + reg); } static void pchan_writel(struct owl_dma_pchan *pchan, u32 reg, u32 data) @@ -254,7 +254,7 @@ static void dma_update(struct owl_dma *od, u32 reg, u32 val, bool state) else regval &= ~val; - writel(val, od->base + reg); + writel(regval, od->base + reg); } static void dma_writel(struct owl_dma *od, u32 reg, u32 data) From ffe3f362de3479f5d75a97a7004a279a650ee7cd Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 21 Mar 2024 14:04:21 +0200 Subject: [PATCH 71/78] idma64: Don't try to serve interrupts when device is powered off [ Upstream commit 9140ce47872bfd89fca888c2f992faa51d20c2bc ] When iDMA 64-bit device is powered off, the IRQ status register is all 1:s. This is never happen in real case and signalling that the device is simply powered off. Don't try to serve interrupts that are not ours. Fixes: 667dfed98615 ("dmaengine: add a driver for Intel integrated DMA 64-bit") Reported-by: Heiner Kallweit Closes: https://lore.kernel.org/r/700bbb84-90e1-4505-8ff0-3f17ea8bc631@gmail.com Tested-by: Heiner Kallweit Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240321120453.1360138-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/dma/idma64.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/dma/idma64.c b/drivers/dma/idma64.c index 89c5e5b46068..920e98dc7113 100644 --- a/drivers/dma/idma64.c +++ b/drivers/dma/idma64.c @@ -172,6 +172,10 @@ static irqreturn_t idma64_irq(int irq, void *dev) u32 status_err; unsigned short i; + /* Since IRQ may be shared, check if DMA controller is powered on */ + if (status == GENMASK(31, 0)) + return IRQ_NONE; + dev_vdbg(idma64->dma.dev, "%s: status=%#x\n", __func__, status); /* Check if we have any interrupt from the DMA controller */ From 40f1d79f07b49c8a64a861706e5163f2db4bd95d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 26 Apr 2024 08:44:08 +0200 Subject: [PATCH 72/78] i2c: smbus: fix NULL function pointer dereference [ Upstream commit 91811a31b68d3765b3065f4bb6d7d6d84a7cfc9f ] Baruch reported an OOPS when using the designware controller as target only. Target-only modes break the assumption of one transfer function always being available. Fix this by always checking the pointer in __i2c_transfer. Reported-by: Baruch Siach Closes: https://lore.kernel.org/r/4269631780e5ba789cf1ae391eec1b959def7d99.1712761976.git.baruch@tkos.co.il Fixes: 4b1acc43331d ("i2c: core changes for slave support") [wsa: dropped the simplification in core-smbus to avoid theoretical regressions] Signed-off-by: Wolfram Sang Tested-by: Baruch Siach Signed-off-by: Sasha Levin --- drivers/i2c/i2c-core-base.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 9079be0d51d1..2bdb8bc4cc82 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -1872,13 +1872,18 @@ static int i2c_check_for_quirks(struct i2c_adapter *adap, struct i2c_msg *msgs, * Returns negative errno, else the number of messages executed. * * Adapter lock must be held when calling this function. No debug logging - * takes place. adap->algo->master_xfer existence isn't checked. + * takes place. */ int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) { unsigned long orig_jiffies; int ret, try; + if (!adap->algo->master_xfer) { + dev_dbg(&adap->dev, "I2C level transfers not supported\n"); + return -EOPNOTSUPP; + } + if (WARN_ON(!msgs || num < 1)) return -EINVAL; From 21bfca822cfc1e71796124e93b46e0d9fa584401 Mon Sep 17 00:00:00 2001 From: Nam Cao Date: Mon, 18 Mar 2024 11:59:02 +0100 Subject: [PATCH 73/78] HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up commit 9c0f59e47a90c54d0153f8ddc0f80d7a36207d0e upstream. The flag I2C_HID_READ_PENDING is used to serialize I2C operations. However, this is not necessary, because I2C core already has its own locking for that. More importantly, this flag can cause a lock-up: if the flag is set in i2c_hid_xfer() and an interrupt happens, the interrupt handler (i2c_hid_irq) will check this flag and return immediately without doing anything, then the interrupt handler will be invoked again in an infinite loop. Since interrupt handler is an RT task, it takes over the CPU and the flag-clearing task never gets scheduled, thus we have a lock-up. Delete this unnecessary flag. Reported-and-tested-by: Eva Kurchatova Closes: https://lore.kernel.org/r/CA+eeCSPUDpUg76ZO8dszSbAGn+UHjcyv8F1J-CUPVARAzEtW9w@mail.gmail.com Fixes: 4a200c3b9a40 ("HID: i2c-hid: introduce HID over i2c specification implementation") Cc: Signed-off-by: Nam Cao Signed-off-by: Jiri Kosina [apply to v4.19 -> v5.15] Signed-off-by: Nam Cao Signed-off-by: Greg Kroah-Hartman --- drivers/hid/i2c-hid/i2c-hid-core.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c index f5dc3122aff8..6b00ab3ffdb1 100644 --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -58,7 +58,6 @@ /* flags */ #define I2C_HID_STARTED 0 #define I2C_HID_RESET_PENDING 1 -#define I2C_HID_READ_PENDING 2 #define I2C_HID_PWR_ON 0x00 #define I2C_HID_PWR_SLEEP 0x01 @@ -259,7 +258,6 @@ static int __i2c_hid_command(struct i2c_client *client, msg[1].len = data_len; msg[1].buf = buf_recv; msg_num = 2; - set_bit(I2C_HID_READ_PENDING, &ihid->flags); } if (wait) @@ -267,9 +265,6 @@ static int __i2c_hid_command(struct i2c_client *client, ret = i2c_transfer(client->adapter, msg, msg_num); - if (data_len > 0) - clear_bit(I2C_HID_READ_PENDING, &ihid->flags); - if (ret != msg_num) return ret < 0 ? ret : -EIO; @@ -550,9 +545,6 @@ static irqreturn_t i2c_hid_irq(int irq, void *dev_id) { struct i2c_hid *ihid = dev_id; - if (test_bit(I2C_HID_READ_PENDING, &ihid->flags)) - return IRQ_HANDLED; - i2c_hid_get_input(ihid); return IRQ_HANDLED; From 9bc1f1791de3cb5e3073bd8c5811d0d02b7dde31 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 29 Apr 2024 23:40:53 +0200 Subject: [PATCH 74/78] Revert "loop: Remove sector_t truncation checks" This reverts commit f92a3b0d003b9f7eb1f452598966a08802183f47, which was commit 083a6a50783ef54256eec3499e6575237e0e3d53 upstream. In 4.19 there is still an option to use 32-bit sector_t on 32-bit architectures, so we need to keep checking for truncation. Since loop_set_status() was refactored by subsequent patches, this reintroduces its truncation check in loop_set_status_from_info() instead. I tested that the loop ioctl operations have the expected behaviour on x86_64, x86_32 with CONFIG_LBDAF=y, and (the special case) x86_32 with CONFIG_LBDAF=n. Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman --- drivers/block/loop.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 6050b039e4d2..860dac8b3f9a 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -243,12 +243,16 @@ static void loop_set_size(struct loop_device *lo, loff_t size) kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE); } -static void +static int figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit) { loff_t size = get_size(offset, sizelimit, lo->lo_backing_file); + sector_t x = (sector_t)size; + if (unlikely((loff_t)x != size)) + return -EFBIG; loop_set_size(lo, size); + return 0; } static inline int @@ -996,7 +1000,10 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, !file->f_op->write_iter) lo_flags |= LO_FLAGS_READ_ONLY; + error = -EFBIG; size = get_loop_size(lo, file); + if ((loff_t)(sector_t)size != size) + goto out_unlock; error = loop_prepare_queue(lo); if (error) @@ -1246,6 +1253,7 @@ loop_set_status_from_info(struct loop_device *lo, int err; struct loop_func_table *xfer; kuid_t uid = current_uid(); + loff_t new_size; if ((unsigned int) info->lo_encrypt_key_size > LO_KEY_SIZE) return -EINVAL; @@ -1273,6 +1281,11 @@ loop_set_status_from_info(struct loop_device *lo, if (info->lo_offset > LLONG_MAX || info->lo_sizelimit > LLONG_MAX) return -EOVERFLOW; + new_size = get_size(info->lo_offset, info->lo_sizelimit, + lo->lo_backing_file); + if ((loff_t)(sector_t)new_size != new_size) + return -EFBIG; + lo->lo_offset = info->lo_offset; lo->lo_sizelimit = info->lo_sizelimit; @@ -1531,9 +1544,7 @@ static int loop_set_capacity(struct loop_device *lo) if (unlikely(lo->lo_state != Lo_bound)) return -ENXIO; - figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit); - - return 0; + return figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit); } static int loop_set_dio(struct loop_device *lo, unsigned long arg) From 271b53d629d6329f1d99177b0590dce7c3cbf28b Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 29 Apr 2024 23:44:50 +0200 Subject: [PATCH 75/78] Revert "y2038: rusage: use __kernel_old_timeval" This reverts commit d5e38d6b84d6d21a4f8a4f555a0908b6d9ffe224, which was commit bdd565f817a74b9e30edec108f7cb1dbc762b8a6 upstream. It broke the build for alpha and that can't be fixed without backporting other more intrusive y2038 changes. This was not a completely clean revert as the affected code in getrusage() was moved by subsequent changes. Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman --- arch/alpha/kernel/osf_sys.c | 2 +- include/uapi/linux/resource.h | 4 ++-- kernel/sys.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index d5694f263dd6..cff52d8ffdb1 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -964,7 +964,7 @@ put_tv32(struct timeval32 __user *o, struct timespec64 *i) } static inline long -put_tv_to_tv32(struct timeval32 __user *o, struct __kernel_old_timeval *i) +put_tv_to_tv32(struct timeval32 __user *o, struct timeval *i) { return copy_to_user(o, &(struct timeval32){ .tv_sec = i->tv_sec, diff --git a/include/uapi/linux/resource.h b/include/uapi/linux/resource.h index 74ef57b38f9f..cc00fd079631 100644 --- a/include/uapi/linux/resource.h +++ b/include/uapi/linux/resource.h @@ -22,8 +22,8 @@ #define RUSAGE_THREAD 1 /* only the calling thread */ struct rusage { - struct __kernel_old_timeval ru_utime; /* user time used */ - struct __kernel_old_timeval ru_stime; /* system time used */ + struct timeval ru_utime; /* user time used */ + struct timeval ru_stime; /* system time used */ __kernel_long_t ru_maxrss; /* maximum resident set size */ __kernel_long_t ru_ixrss; /* integral shared memory size */ __kernel_long_t ru_idrss; /* integral unshared data size */ diff --git a/kernel/sys.c b/kernel/sys.c index 62930aac0bad..690ab55449e7 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1795,8 +1795,8 @@ void getrusage(struct task_struct *p, int who, struct rusage *r) out_children: r->ru_maxrss = maxrss * (PAGE_SIZE / 1024); /* convert pages to KBs */ - r->ru_utime = ns_to_kernel_old_timeval(utime); - r->ru_stime = ns_to_kernel_old_timeval(stime); + r->ru_utime = ns_to_timeval(utime); + r->ru_stime = ns_to_timeval(stime); } SYSCALL_DEFINE2(getrusage, int, who, struct rusage __user *, ru) From 4fc0b7838c253cf443de3a40a9acb224377740e6 Mon Sep 17 00:00:00 2001 From: Yick Xie Date: Fri, 19 Apr 2024 01:06:10 +0800 Subject: [PATCH 76/78] udp: preserve the connected status if only UDP cmsg commit 680d11f6e5427b6af1321932286722d24a8b16c1 upstream. If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg), "connected" should not be set to 0. Otherwise it stops the connected socket from using the cached route. Fixes: 2e8de8576343 ("udp: add gso segment cmsg") Signed-off-by: Yick Xie Cc: stable@vger.kernel.org Reviewed-by: Willem de Bruijn Link: https://lore.kernel.org/r/20240418170610.867084-1-yick.xie@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Yick Xie Signed-off-by: Greg Kroah-Hartman --- net/ipv4/udp.c | 5 +++-- net/ipv6/udp.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 6e4b26c6f97c..abac13470405 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1001,16 +1001,17 @@ int udp_sendmsg(struct sock *sk, struct msghdr *msg, size_t len) if (msg->msg_controllen) { err = udp_cmsg_send(sk, msg, &ipc.gso_size); - if (err > 0) + if (err > 0) { err = ip_cmsg_send(sk, msg, &ipc, sk->sk_family == AF_INET6); + connected = 0; + } if (unlikely(err < 0)) { kfree(ipc.opt); return err; } if (ipc.opt) free = 1; - connected = 0; } if (!ipc.opt) { struct ip_options_rcu *inet_opt; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index cf0bbe2e3a79..dd56242a3edf 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1324,9 +1324,11 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len) ipc6.opt = opt; err = udp_cmsg_send(sk, msg, &ipc6.gso_size); - if (err > 0) + if (err > 0) { err = ip6_datagram_send_ctl(sock_net(sk), sk, msg, &fl6, &ipc6); + connected = false; + } if (err < 0) { fl6_sock_release(flowlabel); return err; @@ -1338,7 +1340,6 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len) } if (!(opt->opt_nflen|opt->opt_flen)) opt = NULL; - connected = false; } if (!opt) { opt = txopt_get(np); From 6e5937b23a13ce6bbe8bf17319efa34598f1650a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 26 Sep 2023 21:41:28 -0700 Subject: [PATCH 77/78] serial: core: fix kernel-doc for uart_port_unlock_irqrestore() commit 29bff582b74ed0bdb7e6986482ad9e6799ea4d2f upstream. Fix the function name to avoid a kernel-doc warning: include/linux/serial_core.h:666: warning: expecting prototype for uart_port_lock_irqrestore(). Prototype was for uart_port_unlock_irqrestore() instead Fixes: b0af4bcb4946 ("serial: core: Provide port lock wrappers") Signed-off-by: Randy Dunlap Cc: Thomas Gleixner Cc: John Ogness Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman Cc: Jiri Slaby Reviewed-by: John Ogness Link: https://lore.kernel.org/r/20230927044128.4748-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 22735ba8c19c..6b8aafae7245 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -334,7 +334,7 @@ static inline void uart_port_unlock_irq(struct uart_port *up) } /** - * uart_port_lock_irqrestore - Unlock the UART port, restore interrupts + * uart_port_unlock_irqrestore - Unlock the UART port, restore interrupts * @up: Pointer to UART port structure * @flags: The saved interrupt flags for restore */ From d09caf7e790da02396630498dc30103433a0bd65 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 2 May 2024 16:17:14 +0200 Subject: [PATCH 78/78] Linux 4.19.313 Link: https://lore.kernel.org/r/20240430103041.111219002@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Pavel Machek (CIP) Tested-by: Shuah Khan Tested-by: Linux Kernel Functional Testing Tested-by: Harshit Mogalapalli Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index b0ae93c88a68..fc0875dbd77b 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 4 PATCHLEVEL = 19 -SUBLEVEL = 312 +SUBLEVEL = 313 EXTRAVERSION = NAME = "People's Front"