Merge 4.19.22 into android-4.19

Changes in 4.19.22 mtd: Make sure mtd->erasesize is valid even if the partition is of size 0 mtd: spinand: Handle the case where PROGRAM LOAD does not reset the cache mtd: spinand: Fix the error/cleanup path in spinand_init() mtd: rawnand: gpmi: fix MX28 bus master lockup problem libata: Add NOLPM quirk for SAMSUNG MZ7TE512HMHP-000L1 SSD tools: iio: iio_generic_buffer: make num_loops signed iio: adc: axp288: Fix TS-pin handling iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius iio: ti-ads8688: Update buffer allocation for timestamps signal: Always notice exiting tasks signal: Better detection of synchronous signals misc: vexpress: Off by one in vexpress_syscfg_exec() mei: me: add ice lake point device id. samples: mei: use /dev/mei0 instead of /dev/mei debugfs: fix debugfs_rename parameter checking pinctrl: sunxi: Correct number of IRQ banks on H6 main pin controller pinctrl: cherryview: fix Strago DMI workaround tracing: uprobes: Fix typo in pr_fmt string mips: cm: reprime error cause MIPS: OCTEON: don't set octeon_dma_bar_type if PCI is disabled MIPS: VDSO: Use same -m%-float cflag as the kernel proper mips: loongson64: remove unreachable(), fix loongson_poweroff(). MIPS: VDSO: Include $(ccflags-vdso) in o32,n32 .lds builds ARM: iop32x/n2100: fix PCI IRQ mapping ARM: tango: Improve ARCH_MULTIPLATFORM compatibility ARM: dts: da850: fix interrupt numbers for clocksource firmware: arm_scmi: provide the mandatory device release callback powerpc/radix: Fix kernel crash with mremap() mic: vop: Fix use-after-free on remove mac80211: ensure that mgmt tx skbs have tailroom for encryption drm/modes: Prevent division by zero htotal drm/amd/powerplay: Fix missing break in switch drm/i915: always return something on DDI clock selection drm/vmwgfx: Fix setting of dma masks drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user SUNRPC: Always drop the XPRT_LOCK on XPRT_CLOSE_WAIT xfrm: Make set-mark default behavior backward compatible Revert "ext4: use ext4_write_inode() when fsyncing w/o a journal" libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive() xfrm: refine validation of template and selector families batman-adv: Avoid WARN on net_device without parent in netns batman-adv: Force mac header to start of data on xmit svcrdma: Reduce max_send_sges svcrdma: Remove max_sge check at connect time Linux 4.19.22 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2019-02-15 09:02:44 +01:00
parent 58d81256e3 6f8c14ee7b
commit 0755dc9375
46 changed files with 397 additions and 138 deletions
--- a/2
+++ b/2
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 21
+SUBLEVEL = 22
 EXTRAVERSION =
 NAME = "People's Front"

--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -476,7 +476,7 @@
 		clocksource: timer@20000 {
 			compatible = "ti,da830-timer";
 			reg = <0x20000 0x1000>;
-			interrupts = <12>, <13>;
+			interrupts = <21>, <22>;
 			interrupt-names = "tint12", "tint34";
 			clocks = <&pll0_auxclk>;
 		};
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -75,8 +75,7 @@ void __init n2100_map_io(void)
 /*
 * N2100 PCI.
 */
-static int __init
-n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;

--- a/arch/arm/mach-tango/pm.c
+++ b/arch/arm/mach-tango/pm.c
@@ -3,6 +3,7 @@
 #include <linux/suspend.h>
 #include <asm/suspend.h>
 #include "smc.h"
+#include "pm.h"

 static int tango_pm_powerdown(unsigned long arg)
 {
@@ -24,10 +25,7 @@ static const struct platform_suspend_ops tango_pm_ops = {
 	.valid = suspend_valid_only_mem,
 };

-static int __init tango_pm_init(void)
+void __init tango_pm_init(void)
 {
 	suspend_set_ops(&tango_pm_ops);
-	return 0;
 }
-
-late_initcall(tango_pm_init);
--- a/arch/arm/mach-tango/pm.h
+++ b/arch/arm/mach-tango/pm.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_SUSPEND
+void __init tango_pm_init(void);
+#else
+#define tango_pm_init NULL
+#endif
--- a/arch/arm/mach-tango/setup.c
+++ b/arch/arm/mach-tango/setup.c
@@ -2,6 +2,7 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
 #include "smc.h"
+#include "pm.h"

 static void tango_l2c_write(unsigned long val, unsigned int reg)
 {
@@ -15,4 +16,5 @@ DT_MACHINE_START(TANGO_DT, "Sigma Tango DT")
 	.dt_compat	= tango_dt_compat,
 	.l2c_aux_mask	= ~0,
 	.l2c_write_sec	= tango_l2c_write,
+	.init_late	= tango_pm_init,
 MACHINE_END
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -457,5 +457,5 @@ void mips_cm_error_report(void)
 	}

 	/* reprime cause register */
-	write_gcr_error_cause(0);
+	write_gcr_error_cause(cm_error);
 }
--- a/arch/mips/loongson64/common/reset.c
+++ b/arch/mips/loongson64/common/reset.c
@@ -59,7 +59,12 @@ static void loongson_poweroff(void)
 {
 #ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
 	mach_prepare_shutdown();
-	unreachable();
+
+	/*
+	 * It needs a wait loop here, but mips/kernel/reset.c already calls
+	 * a generic delay loop, machine_hang(), so simply return.
+	 */
+	return;
 #else
 	void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;

--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -568,6 +568,11 @@ static int __init octeon_pci_setup(void)
 	if (octeon_has_feature(OCTEON_FEATURE_PCIE))
 		return 0;

+	if (!octeon_is_pci_host()) {
+		pr_notice("Not in host mode, PCI Controller not initialized\n");
+		return 0;
+	}
+
 	/* Point pcibios_map_irq() to the PCI version of it */
 	octeon_pcibios_map_irq = octeon_pci_pcibios_map_irq;

@@ -579,11 +584,6 @@ static int __init octeon_pci_setup(void)
 	else
 		octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG;

-	if (!octeon_is_pci_host()) {
-		pr_notice("Not in host mode, PCI Controller not initialized\n");
-		return 0;
-	}
-
 	/* PCI I/O and PCI MEM values */
 	set_io_port_base(OCTEON_PCI_IOSPACE_BASE);
 	ioport_resource.start = 0;
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -8,6 +8,7 @@ ccflags-vdso := \
 	$(filter -E%,$(KBUILD_CFLAGS)) \
 	$(filter -mmicromips,$(KBUILD_CFLAGS)) \
 	$(filter -march=%,$(KBUILD_CFLAGS)) \
+	$(filter -m%-float,$(KBUILD_CFLAGS)) \
 	-D__VDSO__

 ifeq ($(cc-name),clang)
@@ -128,7 +129,7 @@ $(obj)/%-o32.o: $(src)/%.c FORCE
 	$(call cmd,force_checksrc)
 	$(call if_changed_rule,cc_o_c)

-$(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := -mabi=32
+$(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := $(ccflags-vdso) -mabi=32
 $(obj)/vdso-o32.lds: $(src)/vdso.lds.S FORCE
 	$(call if_changed_dep,cpp_lds_S)

@@ -168,7 +169,7 @@ $(obj)/%-n32.o: $(src)/%.c FORCE
 	$(call cmd,force_checksrc)
 	$(call if_changed_rule,cc_o_c)

-$(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := -mabi=n32
+$(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := $(ccflags-vdso) -mabi=n32
 $(obj)/vdso-n32.lds: $(src)/vdso.lds.S FORCE
 	$(call if_changed_dep,cpp_lds_S)

--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -1234,21 +1234,13 @@ extern pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,

 #define pmd_move_must_withdraw pmd_move_must_withdraw
 struct spinlock;
-static inline int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
-					 struct spinlock *old_pmd_ptl,
-					 struct vm_area_struct *vma)
-{
-	if (radix_enabled())
-		return false;
-	/*
-	 * Archs like ppc64 use pgtable to store per pmd
-	 * specific information. So when we switch the pmd,
-	 * we should also withdraw and deposit the pgtable
-	 */
-	return true;
-}
-
-
+extern int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
+				  struct spinlock *old_pmd_ptl,
+				  struct vm_area_struct *vma);
+/*
+ * Hash translation mode use the deposited table to store hash pte
+ * slot information.
+ */
 #define arch_needs_pgtable_deposit arch_needs_pgtable_deposit
 static inline bool arch_needs_pgtable_deposit(void)
 {
--- a/arch/powerpc/mm/pgtable-book3s64.c
+++ b/arch/powerpc/mm/pgtable-book3s64.c
@@ -477,3 +477,25 @@ void arch_report_meminfo(struct seq_file *m)
 		   atomic_long_read(&direct_pages_count[MMU_PAGE_1G]) << 20);
 }
 #endif /* CONFIG_PROC_FS */
+
+/*
+ * For hash translation mode, we use the deposited table to store hash slot
+ * information and they are stored at PTRS_PER_PMD offset from related pmd
+ * location. Hence a pmd move requires deposit and withdraw.
+ *
+ * For radix translation with split pmd ptl, we store the deposited table in the
+ * pmd page. Hence if we have different pmd page we need to withdraw during pmd
+ * move.
+ *
+ * With hash we use deposited table always irrespective of anon or not.
+ * With radix we use deposited table only for anonymous mapping.
+ */
+int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
+			   struct spinlock *old_pmd_ptl,
+			   struct vm_area_struct *vma)
+{
+	if (radix_enabled())
+		return (new_pmd_ptl != old_pmd_ptl) && vma_is_anonymous(vma);
+
+	return true;
+}
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4554,6 +4554,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },
 	{ "SAMSUNG SSD PM830 mSATA *",  "CXM13D1Q", ATA_HORKAGE_NOLPM, },
 	{ "SAMSUNG MZ7TD256HAFV-000L9", NULL,       ATA_HORKAGE_NOLPM, },
+	{ "SAMSUNG MZ7TE512HMHP-000L1", "EXT06L0Q", ATA_HORKAGE_NOLPM, },

 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500IT_*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
--- a/drivers/firmware/arm_scmi/bus.c
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -119,6 +119,11 @@ void scmi_driver_unregister(struct scmi_driver *driver)
 }
 EXPORT_SYMBOL_GPL(scmi_driver_unregister);

+static void scmi_device_release(struct device *dev)
+{
+	kfree(to_scmi_dev(dev));
+}
+
 struct scmi_device *
 scmi_device_create(struct device_node *np, struct device *parent, int protocol)
 {
@@ -138,6 +143,7 @@ scmi_device_create(struct device_node *np, struct device *parent, int protocol)
 	scmi_dev->dev.parent = parent;
 	scmi_dev->dev.of_node = np;
 	scmi_dev->dev.bus = &scmi_bus_type;
+	scmi_dev->dev.release = scmi_device_release;
 	dev_set_name(&scmi_dev->dev, "scmi_dev.%d", id);

 	retval = device_register(&scmi_dev->dev);
@@ -156,9 +162,8 @@ scmi_device_create(struct device_node *np, struct device *parent, int protocol)
 void scmi_device_destroy(struct scmi_device *scmi_dev)
 {
 	scmi_handle_put(scmi_dev->handle);
-	device_unregister(&scmi_dev->dev);
 	ida_simple_remove(&scmi_bus_id, scmi_dev->id);
-	kfree(scmi_dev);
+	device_unregister(&scmi_dev->dev);
 }

 void scmi_set_handle(struct scmi_device *scmi_dev)
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c
@@ -984,6 +984,7 @@ static int smu10_get_clock_by_type_with_latency(struct pp_hwmgr *hwmgr,
 		break;
 	case amd_pp_dpp_clock:
 		pclk_vol_table = pinfo->vdd_dep_on_dppclk;
+		break;
 	default:
 		return -EINVAL;
 	}
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -758,7 +758,7 @@ int drm_mode_hsync(const struct drm_display_mode *mode)
 	if (mode->hsync)
 		return mode->hsync;

-	if (mode->htotal < 0)
+	if (mode->htotal <= 0)
 		return 0;

 	calc_val = (mode->clock * 1000) / mode->htotal; /* hsync in Hz */
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1085,7 +1085,7 @@ static uint32_t icl_pll_to_ddi_pll_sel(struct intel_encoder *encoder,
 			return DDI_CLK_SEL_TBT_810;
 		default:
 			MISSING_CASE(clock);
-			break;
+			return DDI_CLK_SEL_NONE;
 		}
 	case DPLL_ID_ICL_MGPLL1:
 	case DPLL_ID_ICL_MGPLL2:
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -627,13 +627,16 @@ static int vmw_dma_select_mode(struct vmw_private *dev_priv)
 static int vmw_dma_masks(struct vmw_private *dev_priv)
 {
 	struct drm_device *dev = dev_priv->dev;
+	int ret = 0;

-	if (intel_iommu_enabled &&
+	ret = dma_set_mask_and_coherent(dev->dev, DMA_BIT_MASK(64));
+	if (dev_priv->map_mode != vmw_dma_phys &&
 	    (sizeof(unsigned long) == 4 || vmw_restrict_dma_mask)) {
 		DRM_INFO("Restricting DMA addresses to 44 bits.\n");
-		return dma_set_mask(dev->dev, DMA_BIT_MASK(44));
+		return dma_set_mask_and_coherent(dev->dev, DMA_BIT_MASK(44));
 	}
-	return 0;
+
+	return ret;
 }
 #else
 static int vmw_dma_masks(struct vmw_private *dev_priv)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -3843,7 +3843,7 @@ int vmw_execbuf_fence_commands(struct drm_file *file_priv,
 		*p_fence = NULL;
 	}

-	return 0;
+	return ret;
 }

 /**
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -27,9 +27,18 @@
 #include <linux/iio/machine.h>
 #include <linux/iio/driver.h>

-#define AXP288_ADC_EN_MASK		0xF1
-#define AXP288_ADC_TS_PIN_GPADC		0xF2
-#define AXP288_ADC_TS_PIN_ON		0xF3
+/*
+ * This mask enables all ADCs except for the battery temp-sensor (TS), that is
+ * left as-is to avoid breaking charging on devices without a temp-sensor.
+ */
+#define AXP288_ADC_EN_MASK				0xF0
+#define AXP288_ADC_TS_ENABLE				0x01
+
+#define AXP288_ADC_TS_CURRENT_ON_OFF_MASK		GENMASK(1, 0)
+#define AXP288_ADC_TS_CURRENT_OFF			(0 << 0)
+#define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING		(1 << 0)
+#define AXP288_ADC_TS_CURRENT_ON_ONDEMAND		(2 << 0)
+#define AXP288_ADC_TS_CURRENT_ON			(3 << 0)

 enum axp288_adc_id {
 	AXP288_ADC_TS,
@@ -44,6 +53,7 @@ enum axp288_adc_id {
 struct axp288_adc_info {
 	int irq;
 	struct regmap *regmap;
+	bool ts_enabled;
 };

 static const struct iio_chan_spec axp288_adc_channels[] = {
@@ -115,21 +125,33 @@ static int axp288_adc_read_channel(int *val, unsigned long address,
 	return IIO_VAL_INT;
 }

-static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
-				unsigned long address)
+/*
+ * The current-source used for the battery temp-sensor (TS) is shared
+ * with the GPADC. For proper fuel-gauge and charger operation the TS
+ * current-source needs to be permanently on. But to read the GPADC we
+ * need to temporary switch the TS current-source to ondemand, so that
+ * the GPADC can use it, otherwise we will always read an all 0 value.
+ */
+static int axp288_adc_set_ts(struct axp288_adc_info *info,
+			     unsigned int mode, unsigned long address)
 {
 	int ret;

-	/* channels other than GPADC do not need to switch TS pin */
+	/* No need to switch the current-source if the TS pin is disabled */
+	if (!info->ts_enabled)
+		return 0;
+
+	/* Channels other than GPADC do not need the current source */
 	if (address != AXP288_GP_ADC_H)
 		return 0;

-	ret = regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
+	ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+				 AXP288_ADC_TS_CURRENT_ON_OFF_MASK, mode);
 	if (ret)
 		return ret;

 	/* When switching to the GPADC pin give things some time to settle */
-	if (mode == AXP288_ADC_TS_PIN_GPADC)
+	if (mode == AXP288_ADC_TS_CURRENT_ON_ONDEMAND)
 		usleep_range(6000, 10000);

 	return 0;
@@ -145,14 +167,14 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	mutex_lock(&indio_dev->mlock);
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
+		if (axp288_adc_set_ts(info, AXP288_ADC_TS_CURRENT_ON_ONDEMAND,
 					chan->address)) {
 			dev_err(&indio_dev->dev, "GPADC mode\n");
 			ret = -EINVAL;
 			break;
 		}
 		ret = axp288_adc_read_channel(val, chan->address, info->regmap);
-		if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
+		if (axp288_adc_set_ts(info, AXP288_ADC_TS_CURRENT_ON,
 						chan->address))
 			dev_err(&indio_dev->dev, "TS pin restore\n");
 		break;
@@ -164,13 +186,35 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	return ret;
 }

-static int axp288_adc_set_state(struct regmap *regmap)
+static int axp288_adc_initialize(struct axp288_adc_info *info)
 {
-	/* ADC should be always enabled for internal FG to function */
-	if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
-		return -EIO;
+	int ret, adc_enable_val;

-	return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+	/*
+	 * Determine if the TS pin is enabled and set the TS current-source
+	 * accordingly.
+	 */
+	ret = regmap_read(info->regmap, AXP20X_ADC_EN1, &adc_enable_val);
+	if (ret)
+		return ret;
+
+	if (adc_enable_val & AXP288_ADC_TS_ENABLE) {
+		info->ts_enabled = true;
+		ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+					 AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
+					 AXP288_ADC_TS_CURRENT_ON);
+	} else {
+		info->ts_enabled = false;
+		ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+					 AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
+					 AXP288_ADC_TS_CURRENT_OFF);
+	}
+	if (ret)
+		return ret;
+
+	/* Turn on the ADC for all channels except TS, leave TS as is */
+	return regmap_update_bits(info->regmap, AXP20X_ADC_EN1,
+				  AXP288_ADC_EN_MASK, AXP288_ADC_EN_MASK);
 }

 static const struct iio_info axp288_adc_iio_info = {
@@ -200,7 +244,7 @@ static int axp288_adc_probe(struct platform_device *pdev)
 	 * Set ADC to enabled state at all time, including system suspend.
 	 * otherwise internal fuel gauge functionality may be affected.
 	 */
-	ret = axp288_adc_set_state(axp20x->regmap);
+	ret = axp288_adc_initialize(info);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to enable ADC device\n");
 		return ret;
--- a/drivers/iio/adc/ti-ads8688.c
+++ b/drivers/iio/adc/ti-ads8688.c
@@ -41,6 +41,7 @@

 #define ADS8688_VREF_MV			4096
 #define ADS8688_REALBITS		16
+#define ADS8688_MAX_CHANNELS		8

 /*
 * enum ads8688_range - ADS8688 reference voltage range
@@ -385,7 +386,7 @@ static irqreturn_t ads8688_trigger_handler(int irq, void *p)
 {
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
-	u16 buffer[8];
+	u16 buffer[ADS8688_MAX_CHANNELS + sizeof(s64)/sizeof(u16)];
 	int i, j = 0;

 	for (i = 0; i < indio_dev->masklength; i++) {
--- a/drivers/iio/chemical/atlas-ph-sensor.c
+++ b/drivers/iio/chemical/atlas-ph-sensor.c
@@ -444,9 +444,8 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->type) {
 		case IIO_TEMP:
-			*val = 1; /* 0.01 */
-			*val2 = 100;
-			break;
+			*val = 10;
+			return IIO_VAL_INT;
 		case IIO_PH:
 			*val = 1; /* 0.001 */
 			*val2 = 1000;
@@ -477,7 +476,7 @@ static int atlas_write_raw(struct iio_dev *indio_dev,
 			   int val, int val2, long mask)
 {
 	struct atlas_data *data = iio_priv(indio_dev);
-	__be32 reg = cpu_to_be32(val);
+	__be32 reg = cpu_to_be32(val / 10);

 	if (val2 != 0 || val < 0 || val > 20000)
 		return -EINVAL;
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -139,6 +139,8 @@
 #define MEI_DEV_ID_CNP_H      0xA360  /* Cannon Point H */
 #define MEI_DEV_ID_CNP_H_4    0xA364  /* Cannon Point H 4 (iTouch) */

+#define MEI_DEV_ID_ICP_LP     0x34E0  /* Ice Lake Point LP */
+
 /*
 * MEI HW Section
 */
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -105,6 +105,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH8_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_4, MEI_ME_PCH8_CFG)},

+	{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)},
+
 	/* required last entry */
 	{0, }
 };
--- a/drivers/misc/mic/vop/vop_main.c
+++ b/drivers/misc/mic/vop/vop_main.c
@@ -563,6 +563,8 @@ static int _vop_remove_device(struct mic_device_desc __iomem *d,
 	int ret = -1;

 	if (ioread8(&dc->config_change) == MIC_VIRTIO_PARAM_DEV_REMOVE) {
+		struct device *dev = get_device(&vdev->vdev.dev);
+
 		dev_dbg(&vpdev->dev,
 			"%s %d config_change %d type %d vdev %p\n",
 			__func__, __LINE__,
@@ -574,7 +576,7 @@ static int _vop_remove_device(struct mic_device_desc __iomem *d,
 		iowrite8(-1, &dc->h2c_vdev_db);
 		if (status & VIRTIO_CONFIG_S_DRIVER_OK)
 			wait_for_completion(&vdev->reset_done);
-		put_device(&vdev->vdev.dev);
+		put_device(dev);
 		iowrite8(1, &dc->guest_ack);
 		dev_dbg(&vpdev->dev, "%s %d guest_ack %d\n",
 			__func__, __LINE__, ioread8(&dc->guest_ack));
--- a/drivers/misc/vexpress-syscfg.c
+++ b/drivers/misc/vexpress-syscfg.c
@@ -61,7 +61,7 @@ static int vexpress_syscfg_exec(struct vexpress_syscfg_func *func,
 	int tries;
 	long timeout;

-	if (WARN_ON(index > func->num_templates))
+	if (WARN_ON(index >= func->num_templates))
 		return -EINVAL;

 	command = readl(syscfg->base + SYS_CFGCTRL);
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -470,6 +470,10 @@ static struct mtd_part *allocate_partition(struct mtd_info *parent,
 		/* let's register it anyway to preserve ordering */
 		slave->offset = 0;
 		slave->mtd.size = 0;
+
+		/* Initialize ->erasesize to make add_mtd_device() happy. */
+		slave->mtd.erasesize = parent->erasesize;
+
 		printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
 			part->name);
 		goto out_register;
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
@@ -155,9 +155,10 @@ int gpmi_init(struct gpmi_nand_data *this)

 	/*
 	 * Reset BCH here, too. We got failures otherwise :(
-	 * See later BCH reset for explanation of MX23 handling
+	 * See later BCH reset for explanation of MX23 and MX28 handling
 	 */
-	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+	ret = gpmi_reset_block(r->bch_regs,
+			       GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
 	if (ret)
 		goto err_out;

@@ -263,12 +264,10 @@ int bch_set_geometry(struct gpmi_nand_data *this)
 	/*
 	* Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this
 	* chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
-	* On the other hand, the MX28 needs the reset, because one case has been
-	* seen where the BCH produced ECC errors constantly after 10000
-	* consecutive reboots. The latter case has not been seen on the MX23
-	* yet, still we don't know if it could happen there as well.
+	* and MX28.
 	*/
-	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+	ret = gpmi_reset_block(r->bch_regs,
+			       GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
 	if (ret)
 		goto err_out;

--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -304,24 +304,30 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
 	struct nand_device *nand = spinand_to_nand(spinand);
 	struct mtd_info *mtd = nanddev_to_mtd(nand);
 	struct nand_page_io_req adjreq = *req;
-	unsigned int nbytes = 0;
-	void *buf = NULL;
+	void *buf = spinand->databuf;
+	unsigned int nbytes;
 	u16 column = 0;
 	int ret;

-	memset(spinand->databuf, 0xff,
-	       nanddev_page_size(nand) +
-	       nanddev_per_page_oobsize(nand));
+	/*
+	 * Looks like PROGRAM LOAD (AKA write cache) does not necessarily reset
+	 * the cache content to 0xFF (depends on vendor implementation), so we
+	 * must fill the page cache entirely even if we only want to program
+	 * the data portion of the page, otherwise we might corrupt the BBM or
+	 * user data previously programmed in OOB area.
+	 */
+	nbytes = nanddev_page_size(nand) + nanddev_per_page_oobsize(nand);
+	memset(spinand->databuf, 0xff, nbytes);
+	adjreq.dataoffs = 0;
+	adjreq.datalen = nanddev_page_size(nand);
+	adjreq.databuf.out = spinand->databuf;
+	adjreq.ooblen = nanddev_per_page_oobsize(nand);
+	adjreq.ooboffs = 0;
+	adjreq.oobbuf.out = spinand->oobbuf;

-	if (req->datalen) {
+	if (req->datalen)
 		memcpy(spinand->databuf + req->dataoffs, req->databuf.out,
 		       req->datalen);
-		adjreq.dataoffs = 0;
-		adjreq.datalen = nanddev_page_size(nand);
-		adjreq.databuf.out = spinand->databuf;
-		nbytes = adjreq.datalen;
-		buf = spinand->databuf;
-	}

 	if (req->ooblen) {
 		if (req->mode == MTD_OPS_AUTO_OOB)
@@ -332,14 +338,6 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
 		else
 			memcpy(spinand->oobbuf + req->ooboffs, req->oobbuf.out,
 			       req->ooblen);
-
-		adjreq.ooblen = nanddev_per_page_oobsize(nand);
-		adjreq.ooboffs = 0;
-		nbytes += nanddev_per_page_oobsize(nand);
-		if (!buf) {
-			buf = spinand->oobbuf;
-			column = nanddev_page_size(nand);
-		}
 	}

 	spinand_cache_op_adjust_colum(spinand, &adjreq, &column);
@@ -370,8 +368,8 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,

 		/*
 		 * We need to use the RANDOM LOAD CACHE operation if there's
-		 * more than one iteration, because the LOAD operation resets
-		 * the cache to 0xff.
+		 * more than one iteration, because the LOAD operation might
+		 * reset the cache to 0xff.
 		 */
 		if (nbytes) {
 			column = op.addr.val;
@@ -1016,11 +1014,11 @@ static int spinand_init(struct spinand_device *spinand)
 	for (i = 0; i < nand->memorg.ntargets; i++) {
 		ret = spinand_select_target(spinand, i);
 		if (ret)
-			goto err_free_bufs;
+			goto err_manuf_cleanup;

 		ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED);
 		if (ret)
-			goto err_free_bufs;
+			goto err_manuf_cleanup;
 	}

 	ret = nanddev_init(nand, &spinand_ops, THIS_MODULE);
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -1524,7 +1524,7 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
 			DMI_MATCH(DMI_PRODUCT_FAMILY, "Intel_Strago"),
-			DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
 		},
 	},
 	{
@@ -1532,7 +1532,7 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Setzer"),
-			DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
 		},
 	},
 	{
@@ -1540,7 +1540,7 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Cyan"),
-			DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
 		},
 	},
 	{
@@ -1548,7 +1548,7 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Celes"),
-			DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
 		},
 	},
 	{}
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c
@@ -588,7 +588,7 @@ static const unsigned int h6_irq_bank_map[] = { 1, 5, 6, 7 };
 static const struct sunxi_pinctrl_desc h6_pinctrl_data = {
 	.pins = h6_pins,
 	.npins = ARRAY_SIZE(h6_pins),
-	.irq_banks = 3,
+	.irq_banks = 4,
 	.irq_bank_map = h6_irq_bank_map,
 	.irq_read_needs_mux = true,
 };
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -787,6 +787,13 @@ struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
 	struct dentry *dentry = NULL, *trap;
 	struct name_snapshot old_name;

+	if (IS_ERR(old_dir))
+		return old_dir;
+	if (IS_ERR(new_dir))
+		return new_dir;
+	if (IS_ERR_OR_NULL(old_dentry))
+		return old_dentry;
+
 	trap = lock_rename(new_dir, old_dir);
 	/* Source or destination directories don't exist? */
 	if (d_really_is_negative(old_dir) || d_really_is_negative(new_dir))
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -116,16 +116,8 @@ int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 		goto out;
 	}

-	ret = file_write_and_wait_range(file, start, end);
-	if (ret)
-		return ret;
-
 	if (!journal) {
-		struct writeback_control wbc = {
-			.sync_mode = WB_SYNC_ALL
-		};
-
-		ret = ext4_write_inode(inode, &wbc);
+		ret = __generic_file_fsync(file, start, end, datasync);
 		if (!ret)
 			ret = ext4_sync_parent(inode);
 		if (test_opt(inode->i_sb, BARRIER))
@@ -133,6 +125,9 @@ int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 		goto out;
 	}

+	ret = file_write_and_wait_range(file, start, end);
+	if (ret)
+		return ret;
 	/*
 	 * data=writeback,ordered:
 	 *  The caller's filemap_fdatawrite()/wait will sync the data.
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -443,6 +443,11 @@ static inline int xprt_test_and_set_connecting(struct rpc_xprt *xprt)
 	return test_and_set_bit(XPRT_CONNECTING, &xprt->state);
 }

+static inline int xprt_close_wait(struct rpc_xprt *xprt)
+{
+	return test_bit(XPRT_CLOSE_WAIT, &xprt->state);
+}
+
 static inline void xprt_set_bound(struct rpc_xprt *xprt)
 {
 	test_and_set_bit(XPRT_BOUND, &xprt->state);
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -681,6 +681,48 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
 	return signr;
 }

+static int dequeue_synchronous_signal(siginfo_t *info)
+{
+	struct task_struct *tsk = current;
+	struct sigpending *pending = &tsk->pending;
+	struct sigqueue *q, *sync = NULL;
+
+	/*
+	 * Might a synchronous signal be in the queue?
+	 */
+	if (!((pending->signal.sig[0] & ~tsk->blocked.sig[0]) & SYNCHRONOUS_MASK))
+		return 0;
+
+	/*
+	 * Return the first synchronous signal in the queue.
+	 */
+	list_for_each_entry(q, &pending->list, list) {
+		/* Synchronous signals have a postive si_code */
+		if ((q->info.si_code > SI_USER) &&
+		    (sigmask(q->info.si_signo) & SYNCHRONOUS_MASK)) {
+			sync = q;
+			goto next;
+		}
+	}
+	return 0;
+next:
+	/*
+	 * Check if there is another siginfo for the same signal.
+	 */
+	list_for_each_entry_continue(q, &pending->list, list) {
+		if (q->info.si_signo == sync->info.si_signo)
+			goto still_pending;
+	}
+
+	sigdelset(&pending->signal, sync->info.si_signo);
+	recalc_sigpending();
+still_pending:
+	list_del_init(&sync->list);
+	copy_siginfo(info, &sync->info);
+	__sigqueue_free(sync);
+	return info->si_signo;
+}
+
 /*
 * Tell a process that it has a new active signal..
 *
@@ -2390,6 +2432,11 @@ bool get_signal(struct ksignal *ksig)
 		goto relock;
 	}

+	/* Has this task already been marked for death? */
+	ksig->info.si_signo = signr = SIGKILL;
+	if (signal_group_exit(signal))
+		goto fatal;
+
 	for (;;) {
 		struct k_sigaction *ka;

@@ -2403,7 +2450,15 @@ bool get_signal(struct ksignal *ksig)
 			goto relock;
 		}

-		signr = dequeue_signal(current, &current->blocked, &ksig->info);
+		/*
+		 * Signals generated by the execution of an instruction
+		 * need to be delivered before any other pending signals
+		 * so that the instruction pointer in the signal stack
+		 * frame points to the faulting instruction.
+		 */
+		signr = dequeue_synchronous_signal(&ksig->info);
+		if (!signr)
+			signr = dequeue_signal(current, &current->blocked, &ksig->info);

 		if (!signr)
 			break; /* will return 0 */
@@ -2485,6 +2540,7 @@ bool get_signal(struct ksignal *ksig)
 			continue;
 		}

+	fatal:
 		spin_unlock_irq(&sighand->siglock);

 		/*
--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -5,7 +5,7 @@
 * Copyright (C) IBM Corporation, 2010-2012
 * Author:	Srikar Dronamraju <srikar@linux.vnet.ibm.com>
 */
-#define pr_fmt(fmt)	"trace_kprobe: " fmt
+#define pr_fmt(fmt)	"trace_uprobe: " fmt

 #include <linux/module.h>
 #include <linux/uaccess.h>
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -20,7 +20,6 @@
 #include "main.h"

 #include <linux/atomic.h>
-#include <linux/bug.h>
 #include <linux/byteorder/generic.h>
 #include <linux/errno.h>
 #include <linux/gfp.h>
@@ -179,8 +178,10 @@ static bool batadv_is_on_batman_iface(const struct net_device *net_dev)
 	parent_dev = __dev_get_by_index((struct net *)parent_net,
 					dev_get_iflink(net_dev));
 	/* if we got a NULL parent_dev there is something broken.. */
-	if (WARN(!parent_dev, "Cannot find parent device"))
+	if (!parent_dev) {
+		pr_err("Cannot find parent device\n");
 		return false;
+	}

 	if (batadv_mutual_parents(net_dev, net, parent_dev, parent_net))
 		return false;
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -221,6 +221,8 @@ static netdev_tx_t batadv_interface_tx(struct sk_buff *skb,

 	netif_trans_update(soft_iface);
 	vid = batadv_get_vid(skb, 0);
+
+	skb_reset_mac_header(skb);
 	ethhdr = eth_hdr(skb);

 	switch (ntohs(ethhdr->h_proto)) {
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -3240,9 +3240,10 @@ void ceph_con_keepalive(struct ceph_connection *con)
 	dout("con_keepalive %p\n", con);
 	mutex_lock(&con->mutex);
 	clear_standby(con);
+	con_flag_set(con, CON_FLAG_KEEPALIVE_PENDING);
 	mutex_unlock(&con->mutex);
-	if (con_flag_test_and_set(con, CON_FLAG_KEEPALIVE_PENDING) == 0 &&
-	    con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
+
+	if (con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
 		queue_con(con);
 }
 EXPORT_SYMBOL(ceph_con_keepalive);
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1913,9 +1913,16 @@ static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata,
 				int head_need, bool may_encrypt)
 {
 	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_hdr *hdr;
+	bool enc_tailroom;
 	int tail_need = 0;

-	if (may_encrypt && sdata->crypto_tx_tailroom_needed_cnt) {
+	hdr = (struct ieee80211_hdr *) skb->data;
+	enc_tailroom = may_encrypt &&
+		       (sdata->crypto_tx_tailroom_needed_cnt ||
+			ieee80211_is_mgmt(hdr->frame_control));
+
+	if (enc_tailroom) {
 		tail_need = IEEE80211_ENCRYPT_TAILROOM;
 		tail_need -= skb_tailroom(skb);
 		tail_need = max_t(int, tail_need, 0);
@@ -1923,8 +1930,7 @@ static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata,

 	if (skb_cloned(skb) &&
 	    (!ieee80211_hw_check(&local->hw, SUPPORTS_CLONED_SKBS) ||
-	     !skb_clone_writable(skb, ETH_HLEN) ||
-	     (may_encrypt && sdata->crypto_tx_tailroom_needed_cnt)))
+	     !skb_clone_writable(skb, ETH_HLEN) || enc_tailroom))
 		I802_DEBUG_INC(local->tx_expand_skb_head_cloned);
 	else if (head_need || tail_need)
 		I802_DEBUG_INC(local->tx_expand_skb_head);
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1992,13 +1992,15 @@ call_transmit(struct rpc_task *task)
 static void
 call_transmit_status(struct rpc_task *task)
 {
+	struct rpc_xprt *xprt = task->tk_rqstp->rq_xprt;
 	task->tk_action = call_status;

 	/*
 	 * Common case: success.  Force the compiler to put this
-	 * test first.
+	 * test first.  Or, if any error and xprt_close_wait,
+	 * release the xprt lock so the socket can close.
 	 */
-	if (task->tk_status == 0) {
+	if (task->tk_status == 0 || xprt_close_wait(xprt)) {
 		xprt_end_transmit(task);
 		rpc_task_force_reencode(task);
 		return;
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -563,6 +563,99 @@ void svc_rdma_sync_reply_hdr(struct svcxprt_rdma *rdma,
 				      DMA_TO_DEVICE);
 }

+/* If the xdr_buf has more elements than the device can
+ * transmit in a single RDMA Send, then the reply will
+ * have to be copied into a bounce buffer.
+ */
+static bool svc_rdma_pull_up_needed(struct svcxprt_rdma *rdma,
+				    struct xdr_buf *xdr,
+				    __be32 *wr_lst)
+{
+	int elements;
+
+	/* xdr->head */
+	elements = 1;
+
+	/* xdr->pages */
+	if (!wr_lst) {
+		unsigned int remaining;
+		unsigned long pageoff;
+
+		pageoff = xdr->page_base & ~PAGE_MASK;
+		remaining = xdr->page_len;
+		while (remaining) {
+			++elements;
+			remaining -= min_t(u32, PAGE_SIZE - pageoff,
+					   remaining);
+			pageoff = 0;
+		}
+	}
+
+	/* xdr->tail */
+	if (xdr->tail[0].iov_len)
+		++elements;
+
+	/* assume 1 SGE is needed for the transport header */
+	return elements >= rdma->sc_max_send_sges;
+}
+
+/* The device is not capable of sending the reply directly.
+ * Assemble the elements of @xdr into the transport header
+ * buffer.
+ */
+static int svc_rdma_pull_up_reply_msg(struct svcxprt_rdma *rdma,
+				      struct svc_rdma_send_ctxt *ctxt,
+				      struct xdr_buf *xdr, __be32 *wr_lst)
+{
+	unsigned char *dst, *tailbase;
+	unsigned int taillen;
+
+	dst = ctxt->sc_xprt_buf;
+	dst += ctxt->sc_sges[0].length;
+
+	memcpy(dst, xdr->head[0].iov_base, xdr->head[0].iov_len);
+	dst += xdr->head[0].iov_len;
+
+	tailbase = xdr->tail[0].iov_base;
+	taillen = xdr->tail[0].iov_len;
+	if (wr_lst) {
+		u32 xdrpad;
+
+		xdrpad = xdr_padsize(xdr->page_len);
+		if (taillen && xdrpad) {
+			tailbase += xdrpad;
+			taillen -= xdrpad;
+		}
+	} else {
+		unsigned int len, remaining;
+		unsigned long pageoff;
+		struct page **ppages;
+
+		ppages = xdr->pages + (xdr->page_base >> PAGE_SHIFT);
+		pageoff = xdr->page_base & ~PAGE_MASK;
+		remaining = xdr->page_len;
+		while (remaining) {
+			len = min_t(u32, PAGE_SIZE - pageoff, remaining);
+
+			memcpy(dst, page_address(*ppages), len);
+			remaining -= len;
+			dst += len;
+			pageoff = 0;
+		}
+	}
+
+	if (taillen)
+		memcpy(dst, tailbase, taillen);
+
+	ctxt->sc_sges[0].length += xdr->len;
+	ib_dma_sync_single_for_device(rdma->sc_pd->device,
+				      ctxt->sc_sges[0].addr,
+				      ctxt->sc_sges[0].length,
+				      DMA_TO_DEVICE);
+
+	return 0;
+}
+
 /* svc_rdma_map_reply_msg - Map the buffer holding RPC message
 * @rdma: controlling transport
 * @ctxt: send_ctxt for the Send WR
@@ -585,8 +678,10 @@ int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
 	u32 xdr_pad;
 	int ret;

-	if (++ctxt->sc_cur_sge_no >= rdma->sc_max_send_sges)
-		return -EIO;
+	if (svc_rdma_pull_up_needed(rdma, xdr, wr_lst))
+		return svc_rdma_pull_up_reply_msg(rdma, ctxt, xdr, wr_lst);
+
+	++ctxt->sc_cur_sge_no;
 	ret = svc_rdma_dma_map_buf(rdma, ctxt,
 				   xdr->head[0].iov_base,
 				   xdr->head[0].iov_len);
@@ -617,8 +712,7 @@ int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
 	while (remaining) {
 		len = min_t(u32, PAGE_SIZE - page_off, remaining);

-		if (++ctxt->sc_cur_sge_no >= rdma->sc_max_send_sges)
-			return -EIO;
+		++ctxt->sc_cur_sge_no;
 		ret = svc_rdma_dma_map_page(rdma, ctxt, *ppages++,
 					    page_off, len);
 		if (ret < 0)
@@ -632,8 +726,7 @@ int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
 	len = xdr->tail[0].iov_len;
 tail:
 	if (len) {
-		if (++ctxt->sc_cur_sge_no >= rdma->sc_max_send_sges)
-			return -EIO;
+		++ctxt->sc_cur_sge_no;
 		ret = svc_rdma_dma_map_buf(rdma, ctxt, base, len);
 		if (ret < 0)
 			return ret;
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -475,13 +475,12 @@ static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt)

 	/* Qualify the transport resource defaults with the
 	 * capabilities of this particular device */
-	newxprt->sc_max_send_sges = dev->attrs.max_send_sge;
-	/* transport hdr, head iovec, one page list entry, tail iovec */
-	if (newxprt->sc_max_send_sges < 4) {
-		pr_err("svcrdma: too few Send SGEs available (%d)\n",
-		       newxprt->sc_max_send_sges);
-		goto errout;
-	}
+	/* Transport header, head iovec, tail iovec */
+	newxprt->sc_max_send_sges = 3;
+	/* Add one SGE per page list entry */
+	newxprt->sc_max_send_sges += (svcrdma_max_req_size / PAGE_SIZE) + 1;
+	if (newxprt->sc_max_send_sges > dev->attrs.max_send_sge)
+		newxprt->sc_max_send_sges = dev->attrs.max_send_sge;
 	newxprt->sc_max_req_size = svcrdma_max_req_size;
 	newxprt->sc_max_requests = svcrdma_max_requests;
 	newxprt->sc_max_bc_requests = svcrdma_max_bc_requests;
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1488,10 +1488,15 @@ static int validate_tmpl(int nr, struct xfrm_user_tmpl *ut, u16 family)
 		if (!ut[i].family)
 			ut[i].family = family;

-		if ((ut[i].mode == XFRM_MODE_TRANSPORT) &&
-		    (ut[i].family != prev_family))
-			return -EINVAL;
-
+		switch (ut[i].mode) {
+		case XFRM_MODE_TUNNEL:
+		case XFRM_MODE_BEET:
+			break;
+		default:
+			if (ut[i].family != prev_family)
+				return -EINVAL;
+			break;
+		}
 		if (ut[i].mode >= XFRM_MODE_MAX)
 			return -EINVAL;

--- a/samples/mei/mei-amt-version.c
+++ b/samples/mei/mei-amt-version.c
@@ -117,7 +117,7 @@ static bool mei_init(struct mei *me, const uuid_le *guid,

 	me->verbose = verbose;

-	me->fd = open("/dev/mei", O_RDWR);
+	me->fd = open("/dev/mei0", O_RDWR);
 	if (me->fd == -1) {
 		mei_err(me, "Cannot establish a handle to the Intel MEI driver\n");
 		goto err;
--- a/tools/iio/iio_generic_buffer.c
+++ b/tools/iio/iio_generic_buffer.c
@@ -330,7 +330,7 @@ static const struct option longopts[] = {

 int main(int argc, char **argv)
 {
-	unsigned long long num_loops = 2;
+	long long num_loops = 2;
 	unsigned long timedelay = 1000000;
 	unsigned long buf_len = 128;